Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxygen doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Structural and Reactivity Effects of Secondary Metal Doping into Iron-Nitrogen-Carbon Catalysts for Oxygen Electroreduction

While improved activity was recently reported for bimetallic iron-metal-nitrogen-carbon (FeMNC) catalysts for the oxygen reduction reaction (ORR) in acid medium, the nature of active sites and interactions between the two metals are poorly understood. Here, FeSnNC and FeCoNC catalysts were structurally and catalytically compared to their parent FeNC and SnNC catalysts. While CO cryo-chemisorption revealed a twice lower site density of M-N x sites for FeSnNC and FeCoNC relative to FeNC and SnNC, the mass activity of both bimetallic catalysts is 50–100% higher than that of FeNC due to a larger turnover frequency in the bimetallic catalysts. Electron microscopy and X-ray absorption spectroscopy identified the coexistence of Fe-N x and Sn-N x or Co-N x sites, while no evidence was found for binuclear Fe-M-N x sites. 57 Fe Mössbauer spectroscopy revealed that the bimetallic catalysts feature a higher D 1 /D 2 ratio of the spectral signatures assigned to two distinct Fe-N x sites, relative to the FeNC parent catalyst. Furthermore, the addition of the secondary metal favored the formation of D 1 sites, associated with the higher turnover frequency.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tuning Local Atomic Structures in MoS 2 Based Catalysts for Electrochemical Nitrate Reduction

In recent years, there has been a substantial surge in the investigation of transition-metal dichalcogenides such as MoS 2 as a promising electrochemical catalyst. Inspired by denitrification enzymes such as nitrate reductase and nitrite reductase, the electrochemical nitrate reduction catalyzed by MoS 2 with varying local atomic structures is reported. Further, it is demonstrated that the hydrothermally synthesized MoS 2 containing sulfur vacancies behaves as promising catalysts for electrochemical denitrification. With copper doping at less than 9% atomic ratio, the selectivity of denitrification to dinitrogen in the products can be effectively improved. X-ray absorption characterizations suggest that two sulfur vacancies are associated with one copper dopant in the MoS 2 skeleton. DFT calculation confirms that copper dopants replace three adjacent Mo atoms to form a trigonal defect-enriched region, introducing an exposed Mo reaction center that coordinates with Cu atom to increase N 2 selectivity. Apart from the higher activity and selectivity, the Cu-doped MoS 2 also demonstrates remarkably improved tolerance toward oxygen poisoning at high oxygen concentration. Finally, Cu-doped MoS 2 based catalysts exhibit very low specific energy consumption during the electrochemical denitrification process, paving the way for potential scale-up operations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Surface oxygenation induced strong interaction between Pd catalyst and functional support for zinc–air batteries

Employing the strong metal-support interaction (SMSI) effect for promoting the catalyst's activity toward the oxygen reduction reaction (ORR) is promising due to the electronic structure optimization and high utilization efficiency of platinum group metal (PGM) catalysts. Metal oxides as alternative supports for PGMs facilitate intrinsic activity and improve durability as compared to conventional carbon supports. However, the restricted mass and electron transfer at the metal/support interface need to be addressed. Herein, to strengthen the interaction at the metal/support interfaces and improve the utilization efficiency of PGM, an ultralow loading of Pd was embedded in a surface-oxygenated PdNiMnO porous film. The Mn-doping was designed to promote surface oxygenation using a facile anodization process that created sufficiently exposed interfaces between Pd and the support, strengthening the SMSI effects at the Pd/oxygenated support interface for enhancing ORR performance. Furthermore, the Ni-containing oxygenated catalyst served as both the active component for the oxygen evolution reaction (OER) and the functional support for stabilizing Pd, making PdNiMnO a bifunctional catalyst for zinc–air flow batteries (ZAFB). As a proof-of-concept, the ZAFB (PdNiMnO) shows a maximal power density of 211.6 mW cm –2 and outstanding cycling stability for over 2000 h with a minimal voltage gap of 0.69 V at a current density of 10 mA cm –2 , superior to the state-of-the-art catalysts.

25 ENERGY STORAGE↗
DOE OSTI2020

Experimental demonstration of a 5 kW th granular-flow reactor for solar thermochemical energy storage with aluminum-doped calcium manganite particles

A two-step cycle was discussed for solar thermochemical energy storage based on aluminum-doped calcium manganite reduction/oxidation reactions for direct integration into Air Brayton cycles. The two steps encompassed 1) the storage of concentrated solar direct irradiation via the thermal reduction of aluminum-doped calcium manganite and 2) the delivery of heat to an Air-Brayton cycle via re-oxidation of oxygen-deficient aluminum-doped calcium manganite. The re-oxidized aluminum-doped calcium manganite was fed back to the first step to complete the cycle. A 5 kWth solar thermochemical reactor operating under vacuum was fabricated and tested to examine the first cycle reduction step. Reactor operating conditions and high-flux solar simulator control were tuned for continuous reactor operation with particle temperatures > 1073 K. Continuous operation was achieved using intermittent, dense granular flows. A maximum absorption efficiency of 64.7% was shown, accounting for both sensible and chemical heat storage.

25 ENERGY STORAGE↗
DOE OSTI2020

Aluminum-doped calcium manganite particles for solar thermochemical energy storage: Reactor design, particle characterization, and heat and mass transfer modeling

A two-step cycle is discussed for solar thermochemical energy storage based on particulate aluminum-doped calcium manganite reduction/oxidation reactions for direct integration into Air Brayton cycles. The two steps encompass 1) the storage of concentrated solar irradiation within endothermic reduction of aluminum-doped calcium manganite and 2) the delivery of heat to an Air-Brayton cycle via exothermic re-oxidation of oxygen-deficient aluminum-doped calcium magnanite. A 5 kW th scale solar thermochemical reactor operating under vacuum was designed, modeled, and optimized to thermally reduce a continuous, gravity-driven flow of aluminum-doped calcium manganite particles. The granular flows were characterized in a tilt-flow rig, and particle image velocimetry was used to determine flow properties via frictional and velocity scaling relationships. Flow properties were integrated into a detailed heat and mass transfer model of the solar thermochemical reactor. A reactor design with 31° inclination angle, 230 g/min of particles, and 5.2 kW th radiative input from the high-flux solar simulator was discovered to produce an outlet flow temperature of 1158 K, with stoichiometric deviations of 0.076 and a storage efficiency of 0.628 while avoiding particle overheating and promoting longer particle residence times.

14 SOLAR ENERGY↗
DOE OSTI2022

Spectroscopic Investigation of Shallow Hole Traps in Ga- and B-doped Czochralski Silicon: Insight into Light-Induced Degradation

We report the minority carrier lifetime in B-doped Czochralski (Cz) Si declines upon carrier injection due to light-induced degradation (LID), which is attributed to the formation of a recombination-active boron-oxygen complex. Ga-doped Cz Si does not undergo LID. Previously, we showed that B-doped Cz Si undergoes a transition from paramagnetic to diamagnetic due to LID. Herein, we show that Ga-doped Cz Si remains paramagnetic upon carrier injection. This suggests that either the shallow hole traps that are formed in B-doped Cz Si are absent in Ga-doped Cz Si, or the negative-U centers in Ga-doped Cz Si do not transform into a recombination-active configuration, because the shallow acceptor trap state is shallower than the Ga acceptor level in the forbidden gap. In contrast to B-doped Cz Si, the defect signatures in Ga-doped Cz Si do not change upon light exposure, as detected by both electron paramagnetic resonance and deep-level transient spectroscopy.

14 SOLAR ENERGY↗
DOE OSTI2024

Quantitative Identification of Dopant Occupation in Li‐Rich Cathodes

Elemental doping is widely used to improve the performance of cathode materials in lithium‐ion batteries. However, macroscopic/statistical investigation on how doping sites are distributed in the material lattice, despite being a key prerequisite for understanding and manipulating the doping effect, has not been effectively established. Herein, to solve this predicament, a universal strategy is proposed to quantitatively identify the locations of Al and Mg dopants in lithium‐rich layered oxides (LLOs). Solid evidence confirms that Al prefers to occupy the transition metal (TM) layer, while Mg evenly occupies both TM and Li layers. As a result, Mg significantly reduces the thickness of LiO 2 slabs at room temperature, which will increase the energy barrier of oxygen activation and enhance the structure stability of LLOs. The suppressed oxygen activity in Mg‐doped LLO can be kinetically unlocked at 55 °C. The different characteristics of Al and Mg enlighten an Al/Mg co‐doping strategy to optimize LLOs, which significantly improves the cycle performance while lifting the capacity. In conclusion, these insights from the quantitative identification of doping sites shed light on the manipulation of doping effects toward better cathodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Modeling Electrokinetics of Oxygen Electrodes in Solid Oxide Electrolyzer Cells

A microscale model is presented in this study to simulate electrode kinetics of the oxygen electrode in a solid oxide electrolyzer cell (SOEC). Two mixed ionic/electronic conducting structures are examined for the oxygen producing electrode in this work: single layer porous lanthanum strontium cobalt ferrite (LSCF), and bilayer LSCF/SCT (strontium cobalt tantalum oxide) structures. A yttrium-stabilized zirconia (YSZ) electrolyte separates the hydrogen and oxygen electrodes, as well as a gadolinium doped-ceria (GDC) buffer layer on the oxygen electrode side. Electrochemical reactions occurring at the two-phase boundaries (2PBs) and three-phase boundaries (3PBs) of single-layer LSCF and bilayer LSCF/SCT oxygen electrodes are modeled under various SOEC voltages with lattice oxygen stoichiometry as the key output. The results reveal that there exists a competition in electrode kinetics between 2PBs and 3PBs, but 3PBs are the primary reactive sites for single-layer LSCF oxygen electrode under high voltages. These locations experience the greatest oxygen stoichiometry variations and are therefore the most likely locations for dimensional changes. By applying an active SCT layer over LSCF, the 2PBs become activated to compete with the 3PBs, thus alleviating oxygen stoichiometry variations and reducing the likelihood of dimensional change. This strategy could reduce lattice structural expansion, proving to be valuable for electrode-electrolyte delamination prevention and will be the focus of future work.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Methane Activation on Metal-Doped (111) and (100) Ceria Surfaces with Charge-Compensating Oxygen Vacancies

Reducing the temperature for methane activation is an important objective that would benefit many technological applications. In this work we explore the possibility to achieve this goal using single atom catalysts (SACs) on ceria surfaces. In particular, we focus on Ag SACs, which have recently been suggested to be promising catalysts for both the oxidation of molecular hydrogen and CH 4 activation. The rate limiting step of methane activation on ceria is the breaking of the first C-H bond. Using first principles calculations, we investigate this reaction on CeO 2 (111) and (100) surfaces, which are both frequently exposed on ceria nanoparticles. For undoped ceria, our results show that the dissociation of CH 4 to CH 3 + H has a lower barrier on the (001) surface than on the (111) one. On both surfaces, the presence of Ag enhances the binding of CH 4 to the surface and reduces the activation energy for its dissociation. Interestingly, the formation of methanol via the Mars-van Krevelen mechanism has a slightly lower energy barrier than the dissociation of CH 4 to CH 3 + H on Ag-doped CeO 2 (111), suggesting that methanol is a likely product of methane activation on this surface. Here, a novel aspect of our work relative to previous studies on CH 4 activation over transition metal doped ceria is that we mainly focus on stable surface structures where each Ag dopant substituting a Ce atom forms a complex with a surface oxygen vacancy (VO). Our results show that these Ag-VO complexes play a critical role and accounting for their presence is essential for a proper description of the surface reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Methane combustion over Ni/Ce x Zr 1-x O 2 catalysts: impact of ceria/zirconia ratio

In this work, a series of Ce x Zr 1–x O 2 (x=1, 0.83, 0.17, 0) supports and 2 wt.% Ni/Ce x Zr 1–x O 2 catalysts were synthesized and evaluated for CH 4 oxidation. The Ce x Zr 1–x O 2 supports showed moderate activity (T 50 =519-638°C) with CO by-product formation. Additionally, nickel incorporation onto Ce x Zr 1–x O 2 lowered the T 50 to 438–477°C and eliminated the formation of CO. The results indicated that moderate Zr doping improved the support oxygen storage capacity (OSC) and reducibility of the catalyst at low temperatures (H 2 -TPR) leading to an enhanced CH 4 combustion turnover frequency: Ni/ZrO 2 <Ni/Ce 0.17 Zr 0.83 O 2 <Ni/CeO 2 <Ni/Ce 0.83 Zr 0.17 O 2 . The apparent activation energies of Ni/Ce x Zr 1–x O 2 catalysts (87-92 kJ/mol) were much lower than the ones of Ce x Zr 1–x O 2 supports and Ni/quartz sand (111-120 kJ/mol) indicating that CH 4 oxidation is facilitated when Ni is deposited on Ce x Zr 1–x O 2 . Moreover, stability tests with H 2 O and CO 2 showed that Zr doping can improve the catalyst stability, while H 2 O had a stronger reversible inhibition effect than CO 2 for CH 4 combustion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Oxygen Affinity: The Missing Link Enabling Prediction of Proton Conductivities in Doped Barium Zirconates

Proton-conducting oxides, specifically doped barium zirconates, have garnered much attention as electrolytes for solid-state electrochemical devices operable at intermediate temperatures (400–600 °C). In chemical terms, hydration energy, E hyd , and proton–dopant association energy, E as , are two key parameters that determine whether an oxide exhibits fast proton conduction, but to date ab initio studies have for the most part studied each parameter separately, with no clear correlation with proton conductivity identified in either case. Here, we demonstrate that the oxygen affinity, E O.dopant , defined as the energy released when an oxide ion enters an oxygen vacancy close to a dopant atom, is the missing link between these two parameters and correlates well with experimental proton conductivities in doped barium zirconates. Ab initio calculations of point defects and their complexes in Sc-, In-, Lu-, Er-, Y-, Gd-, and Eu-doped barium zirconates are used to determine E hyd , E as , E O.dopant , and the hydrogen affinity, E H.host , of each system. These four energy terms are related by E hyd = E O.dopant + 2E H.host + 2E as . Complementary impedance spectroscopy measurements reveal that the stronger the calculated oxygen affinity of a system, the higher the proton conductivity at 350 °C. Although the proton trapping site is also an important factor, the results show that oxygen affinity is an excellent predictor of proton conductivity in these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Multinonmetal-Doped V 2 O 5 Nanocomposites for Lithium-Ion Battery Cathodes

Lithium-ion batteries (LIBs) are critical for portable electronics and electric vehicles, demanding higher energy density to meet increasing energy storage needs. Current commercial cathode materials, such as LiFePO 4 and LiCoO 2 , are limited by a single electron transfer, restricting their energy density. Vanadium pentoxide (V 2 O 5 ) emerges as a promising high-capacity cathode due to its high theoretical capacity of 443 mA h g –1 with three Li storage capacities, significantly surpassing conventional materials. However, the practical application of V 2 O 5 is hindered by a large structural evolution and rapid capacity fading during full lithium intercalation. Here, this study introduces a multinonmetal doping (MNM) strategy to enhance V 2 O 5 cathodes by incorporating all-nonmetal dopants (B, P, and Si) and graphene (G). MNM-V 2 O 5 -G exhibits increased surface oxygen defects, improving charge transfer kinetics and thus enhancing the rate performance and cycling stability. Our results provide valuable insights into the role of surface oxygen defects in stabilizing V 2 O 5 with element doping. This research highlights the potential of multinonmetal doping to improve LIB cathode materials, offering a promising pathway for design of high-energy-density V 2 O 5 cathodes and advancing the development of next-generation energy storage solutions.

25 ENERGY STORAGE↗
DOE OSTI2024

Interplay between element-specific distortions and electrocatalytic oxygen evolution for cobalt–iron hydroxides

A microscopic understanding of how Fe-doping of Co(OH) 2 improves electrocatalytic oxygen evolution remains elusive. We study two Co 1–x Fex(OH) 2 series that differ in fabrication protocol and find composition alone poorly correlates to catalyst performance. Structural descriptors extracted using X-ray diffraction, X-ray absorption spectroscopy, and Raman spectroscopy reveal element-specific distortions in Co 1–x Fe x (OH) 2 . These structural descriptors are composition-dependent within individual sample series but inconsistent across fabrication protocols, revealing fabrication-dependence in catalyst microstructure. Correlations between structural parameters from different techniques show that Fe–O resists bond length changes, forcing distortion of Co environments. We find the difference in O–M–O bond angles between Co and Fe sites to correlate with electrocatalytic behavior across both sample series, which we attribute to asymmetric distortion of potential energy surfaces for the Co(III) to Co(IV) oxidation. A Tafel slope consistent with a rate-limiting step without electron transfer emerges as the O–Co–O angle decreases, implying a distortion-induced transition in the rate-limiting step. The fabrication dependence of electronic and bonding structure in the catalysts should be considered in theoretical and high-throughput analyses of electrocatalyst materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗