SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Results of experiments on hydrogen-oxygen fuel cells show that higher current densities are obtained with cell anodes having a 100 micron thin active layer of porous nickel containing silver electrocatalyst. Increase in current density is attributed to a convective mass transport mechanism.
Effect of various parameters on performance characteristics of regenerative hydrogen-oxygen fuel cell
Performance of prototype hydrogen oxygen electrolytic regenerative fuel cell stack with gas storage tank
Hydrogen-oxygen regenerative fuel cell testing to improve cycle life capability and to investigate modes of cell performance deterioration
The goal of this project was to probe fundamental kinetics questions regarding the gas phase reactive behavior of oxygenates. In order to succeed, our program necessitated both the development of new experimental tools and the development of theory based kinetic models to explain the chemistry of oxygenate fuels. By using advanced hybrid additive manufacturing/ traditional manufacturing techniques to create specialized ceramic micro-reactors, the team was able to simulate extreme high-temperature environments with much greater precision and durability than was previously possible. These tiny, high-tech tubes allow researchers to capture and identify "fleeting" chemical species—molecules that exist for only a fraction of a millisecond—using sophisticated light sources and mass spectrometry. Additionally, the team supported the development of a tabletop VUV laser system for isomer detection without a synchrotron. Through this work, we have successfully mapped out the specific chemical pathways of various oxygen-rich fuels, solving long-standing mysteries about how these substances break down kinetically. Ultimately, this research provides the fundamental knowledge needed to design next-generation engines and fuels that are better for the environment.
Hydrogen-oxygen regenerative fuel cell tests to evaluate performance characteristics of matrix materials and electrodes
Evaluation of hydrogen-oxygen fuel cell water for human consumption
Zirconium phosphate membranes for intermediate temperature hydrogen-oxygen fuel cells
Capillary hydrogen-oxygen fuel cell power systems for aerospace applications
Continuous impurities purging from hydrogen oxygen fuel cells gas compartments, describing operation mode and design techniques
Here, an analytical model for resistance to oxygen transport in air electrodes containing carbon black supports with high surface area was developed by combining a Thiele modulus—effectiveness factor approach at the agglomerate scale (~150 nm) with nanoscale diffusional resistance in carbon micropores/pits (~5 nm). This paper extends an earlier model for transport resistance to platinum nanoparticles on low surface area carbon. Differences in transport resistances between catalyst layers with high and low surface area carbon blacks predicted by the model with reasonable geometric dimensions and physical properties are consistent with experimental observations.
As a result of the need for a uniform hot gas test stream for fuel injector development for hydrogen fueled supersonic combustion ramjet engines, an experimental study of injector configuration effect on exit flow uniformity of a hydrogen fueled oxygen replenished, combustion burner was made. Measurements used to investigate the burner nozzle exit profiles were pitot and gas sample measurements. Gas composition and associated temperature profiles were reduced to an acceptable level by burner injector modifications. The effect of the injector modifications was to redistribute the hydrogen fuel, increase the air pressure drop, promote premixing of the oxygen and air, and establish a uniform flow pattern where the oxygen-air mixture comes into contact with the hydrogen fuel. The most sensitive phenomenon which affected the composition profiles was the uniformity of the air distribution supplied to the combustion chamber.
Single hydrogen-oxygen electrolyte fuel cell test with platinized porous nickel electrodes
Weight, life and performance characteristics optimization of hydrogen-oxygen fuel cell power systems were considered. A promising gold alloy cathode catalyst was identified and tested in a cell for 5,000 hours. The compatibility characteristics of candidate polymer structural materials were measured after exposure to electrolyte and water vapor for 8,000 hours. Lightweight cell designs were prepared and fabrication techniques to produce them were developed. Testing demonstrated that predicted performance was achieved. Lightweight components for passive product water removal and evaporative cooling of cells were demonstrated. Systems studies identified fuel cell powerplant concepts for meeting the requirements of advanced spacecraft.
Hydrogen oxygen electrolytic regenerative fuel
The NASA Glenn Research Center has constructed a closed-cycle hydrogen-oxygen PEM regenerative fuel cell (RFC) to explore its potential use as an energy storage device for a high altitude solar electric aircraft. Built up over the last 2 years from specialized hardware and off the shelf components the Glenn RFC is a complete "brassboard" energy storage system which includes all the equipment required to (1) absorb electrical power from an outside source and store it as pressurized hydrogen and oxygen and (2) make electrical power from the stored gases, saving the product water for re-use during the next cycle. It consists of a dedicated hydrogen-oxygen fuel cell stack and an electrolyzer stack, the interconnecting plumbing and valves, cooling pumps, water transfer pumps, gas recirculation pumps, phase separators, storage tanks for oxygen (O2) and hydrogen (H2), heat exchangers, isolation valves, pressure regulators, nitrogen purge provisions, instrumentation, and other components. It specific developmental functions include: (1) Test fuel cells and fuel cell components under repeated closed-cycle operation (nothing escapes; everything is used over and over again). (2) Simulate diurnal charge-discharge cycles (3) Observe long-term system performance and identify degradation and loss mechanisms. (4) Develop safe and convenient operation and control strategies leading to the successful development of mission-capable, flight-weight RFC's.
A fuel cell stack has been developed to supply power for a high-altitude aircraft with a minimum of air handling. The fuel cell is capable of utilizing oxygen from ambient air at low pressure with no need for compression. For such an application, it is advantageous to take oxygen from the air (in contradistinction to carrying a supply of oxygen onboard), but it is a challenging problem to design a fuel-cell stack of reasonable weight that can generate sufficient power while operating at reduced pressures. The present fuel-cell design is a response to this challenge. The design features a novel bipolar plate structure in combination with a gas-diffusion structure based on a conductive metal core and a carbon gas-diffusion matrix. This combination makes it possible for the flow fields in the stack to have a large open fraction (ratio between open volume and total volume) to permit large volumes of air to flow through with exceptionally low backpressure. Operations at reduced pressure require a corresponding increase in the volume of air that must be handled to deliver the same number of moles of oxygen to the anodes. Moreover, the increase in the open fraction, relative to that of a comparable prior fuel-cell design, reduces the mass of the stack. The fuel cell has been demonstrated to operate at a power density as high as 105 W/cm2 at an air pressure as low as 2 psia (absolute pressure 14 kPa), which is the atmospheric pressure at an altitude of about 50,000 ft ( 15.2 km). The improvements in the design of this fuel cell could be incorporated into designs of other fuel cells to make them lighter in weight and effective at altitudes higher than those of prior designs. Potential commercial applications for these improvements include most applications now under consideration for fuel cells.
Hydrogen-oxygen fuel cell power systems design, fabrication, and testing