Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter correlations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Alpha particle loss measurements and analysis in JET DT plasmas

Abstract Burning reactor plasmas will be self-heated by fusion born alpha particles from deuterium-tritium reactions. Consequently, a thorough understanding of the confinement and transport of DT-born alpha particles is necessary to maintain the plasma self-heating. Measurements of fast ion losses provide a direct means to monitor alpha particle confinement. JET’s 2021–2022 second experimental DT-campaign offers burning plasma scenarios with advanced fast ion loss diagnostics for the first time in nearly 25 years. Coherent and non-coherent alpha losses were observed due to a variety of low frequency MHD activity. This manuscript will present the loss mechanisms, spatial and pitch dependencies, scalings with plasma parameters, correlations with wall impurities, and magnitude of DT-alpha born losses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Galaxy bias from galaxy–galaxy lensing in the DES science verification data

We present a measurement of galaxy-galaxy lensing around a magnitude-limited ($i_{AB} < 22.5$) sample of galaxies from the Dark Energy Survey Science Verification (DES-SV) data. We split these lenses into three photometric-redshift bins from 0.2 to 0.8, and determine the product of the galaxy bias $b$ and cross-correlation coefficient between the galaxy and dark matter overdensity fields $r$ in each bin, using scales above 4 Mpc/$h$ comoving, where we find the linear bias model to be valid given our current uncertainties. We compare our galaxy bias results from galaxy-galaxy lensing with those obtained from galaxy clustering (Crocce et al. 2016) and CMB lensing (Giannantonio et al. 2016) for the same sample of galaxies, and find our measurements to be in good agreement with those in Crocce et al. (2016), while, in the lowest redshift bin ($z\sim0.3$), they show some tension with the findings in Giannantonio et al. (2016). We measure $b\cdot r$ to be $0.87\pm 0.11$, $1.12 \pm 0.16$ and $1.24\pm 0.23$, respectively for the three redshift bins of width $\Delta z = 0.2$ in the range $0.2<z <0.8$, defined with the photometric-redshift algorithm BPZ. Using a different code to split the lens sample, TPZ, leads to changes in the measured biases at the 10-20\% level, but it does not alter the main conclusion of this work: when comparing with Crocce et al. (2016) we do not find strong evidence for a cross-correlation parameter significantly below one in this galaxy sample, except possibly at the lowest redshift bin ($z\sim 0.3$), where we find $r = 0.71 \pm 0.11$ when using TPZ, and $0.83 \pm 0.12$ with BPZ.

79 ASTRONOMY AND ASTROPHYSICS↗

Intrinsic alignment in redMaPPer clusters – II. Radial alignment of satellites towards cluster centres

We study the orientations of satellite galaxies in redMaPPer clusters constructed from the Sloan Digital Sky Survey at 0.1 < z < 0.35 to determine whether there is any preferential tendency for satellites to point radially towards cluster centres. Here, we analyse the satellite alignment (SA) signal based on three shape measurement methods (re-Gaussianization, de Vaucouleurs, and isophotal shapes), which trace galaxy light profiles at different radii. The measured SA signal depends on these shape measurement methods. We detect the strongest SA signal in isophotal shapes, followed by de Vaucouleurs shapes. While no net SA signal is detected using re-Gaussianization shapes across the entire sample, the observed SA signal reaches a statistically significant level when limiting to a subsample of higher luminosity satellites. We further investigate the impact of noise, systematics, and real physical isophotal twisting effects in the comparison between the SA signal detected via different shape measurement methods. Unlike previous studies, which only consider the dependence of SA on a few parameters, here we explore a total of 17 galaxy and cluster properties, using a statistical model averaging technique to naturally account for parameter correlations and identify significant SA predictors. We find that the measured SA signal is strongest for satellites with the following characteristics: higher luminosity, smaller distance to the cluster centre, rounder in shape, higher bulge fraction, and distributed preferentially along the major axis directions of their centrals. Finally, we provide physical explanations for the identified dependences and discuss the connection to theories of SA.

79 ASTRONOMY AND ASTROPHYSICS↗

Optical conductivity of overdoped cuprates from ab initio out-of-plane impurity potentials

Dopant impurity potentials determined by ab initio supercell density functional theory calculations are used to calculate the optical conductivity of overdoped La 2-x ⁢Sr x CuO 4 (LSCO) and Tl 2 ⁢Ba 2⁢ CuO 6+δ (Tl-2201) in the superconducting and normal states. Vertex corrections are included to account for the effect of forward scattering on two-particle properties. This approach was previously shown to provide good, semiquantitative agreement with measurements of superfluid density in LSCO. Here, in this study, we compare calculations of conductivity with measurements of terahertz conductivity on LSCO using identical impurity, band, and correlation parameters and find similarly good correspondence with experiment. In the process, we delineate the impact of the different disorder mechanisms on single-particle and transport relaxation processes. In particular, we reveal the critical role of apical oxygen vacancies in transport scattering and show that transport relaxation rates in LSCO are significantly reduced when apical oxygen vacancies are annealed out. These considerations are shown to be crucial for understanding the variability of experimental results for overdoped LSCO in samples of nominally identical doping but different types. Finally, we give predictions for Tl-2201 terahertz conductivity experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Precision half-life determination for the β + emitter N 13

A new precision half-life measurement of 13 N has been conducted using the TwinSol β-counting station at the University of Notre Dame. Here, the measured value of $t^{new}_{1/2}$ = 597.05(19) s differs from the previous world value by about 2.8σ. An evaluation of the 13N half-life results in a $t^{world}_{1/2}$ = 597.19(22) s. Updated Standard Model predictions for the Fermi to Gamow-Teller mixing ratio ρ and its associated correlation parameters have been calculated using the new 13 N world half life in preparation for a future measurement of the mixing ratio. Finally, an ab initio no-core configuration interaction (NCCI) calculation for the B(GT) of this decay, carried out using the Daejeon16 interaction, has been carried out, revealing the need for higher-order chiral corrections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Impact of late-time neutrino emission on the diffuse supernova neutrino background

In the absence of high-statistics supernova neutrino measurements, estimates of the diffuse supernova neutrino background (DSNB) hinge on the precision of simulations of core-collapse supernovae. Understanding the cooling phase of protoneutron star (PNS) evolution (≳ 1 s after core bounce) is crucial, since approximately 50% of the energy liberated by neutrinos is emitted during the cooling phase. We model the cooling phase with a hybrid method by combining the neutrino emission predicted by 3D hydrodynamic simulations with several cooling-phase estimates, including a novel two-parameter correlation depending on the final baryonic PNS mass and the time of shock revival. We find that the predicted DSNB event rate at Super-Kamiokande can vary by a factor of ~2–3 depending on the cooling-phase treatment. Here we also find that except for one cooling estimate, the range in predicted DSNB events is largely driven by the uncertainty in the neutrino mean energy. With a good understanding of the late-time neutrino emission, more precise DSNB estimates can be made for the next generation of DSNB searches.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Universal Maximum Strength of Solid Metals and Alloys

As described here, interstitial electron density ρ o is offered as a direct metric for maximum strength in metals, arising from universal properties derived from an electron-gas – ρ o sets the exchange-correlation parameter r s in density-functional theory (DFT). It holds also for maximum shear strength τ max in polycrystals [Phys. Rev. Lett. 124, 125501]. Elastic moduli and τ max for polycrystalline (amorphous) metals are linear with ρ o and melting T m (glass-transition T g ) temperature. ρ o or r s , even with rule-of-mixture estimate, predicts relative strength for rapid, reliable selection of high-strength alloys with ductility, as confirmed for elements to steels to complex solid-solutions, and validated experimentally.

36 MATERIALS SCIENCE↗

Phonons, magnons, and lattice thermal transport in antiferromagnetic semiconductor MnTe

The antiferromagnetic semiconductor MnTe has recently attracted attention for spintronics and high-performance thermoelectric applications. However, little is known about its vibrational and thermal transport properties and how these might relate to the electronic and magnetic structure, particularly as related to 3d Mn orbital correlations. Here, we calculate a physically justified Coulomb correlation parameter within the DFT+U framework. We couple this framework with the Heisenberg Hamiltonian and first-principles Boltzmann transport to understand the magnetic, vibrational, and phonon thermal transport properties of MnTe. We also perform inelastic neutron and nuclear inelastic x-ray scattering measurements of the total and partial phonon density of states, respectively. Very good agreement is obtained with the measured and calculated phonon density of states, and with available measurements for the band gap, local magnetic moments, Néel temperature, magnon dispersion, thermal conductivity, and phonon dispersion. Here, this study demonstrates that the vibrational and magnetic degrees of freedom are not strongly coupled in MnTe, and provides a more comprehensive picture of this technologically promising material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diffraction-geometry refinement in the DIALS framework

Rapid data collection and modern computing resources provide the opportunity to revisit the task of optimizing the model of diffraction geometry prior to integration. A comprehensive description is given of new software that builds upon established methods by performing a single global refinement procedure, utilizing a smoothly varying model of the crystal lattice where appropriate. This global refinement technique extends to multiple data sets, providing useful constraints to handle the problem of correlated parameters, particularly for small wedges of data. Examples of advanced uses of the software are given and the design is explained in detail, with particular emphasis on the flexibility and extensibility it entails.

59 BASIC BIOLOGICAL SCIENCES↗

TH-C-12A-09: Planning and Delivery of the Fully Dynamic Trajectory Modulated Arc Therapy: Application to Accelerated Partial Breast Irradiation

Purpose: A novel trajectory modulated arc therapy (TMAT) system was developed that uses source motion trajectory involving synchronized gantry rotation with translational and rotational couch movement. MLC motion and dose rate were fully optimized for dynamic beam delivery. This work presents a platform for planning deliverable TMAT on a collision free coronal trajectory and evaluates its benefit for accelerated partial breast irradiation (APBI) in a prone position. Methods: The TMAT algorithm was built on VMAT with modifications (physical properties on couch movement were defined) and enhancements (pencil beam dose calculation engine to support extended SSDs) to make it feasible for TMAT delivery. A Matlab software environment for TMAT optimization and dose calculation was created to allow any user specified motion axis. TMAT delivery was implemented on Varian TrueBeamTM STx via XML scripts. 10 prone breast irradiation cases were evaluated in VMAT and compared with a 6- field non-coplanar IMRT plan. Patient selection/exclusion criteria and structure contouring followed the guidelines of NSABP B-39/RTOG 0413 protocol. Results: TMAT delivery time was ∼4.5 minutes. 251.5°±7.88° of non-isocentric couch arc was achieved by the optimized trajectory with 180– 210 control points at 1°–2° couch increments. The improved dose distribution by TMAT was most clearly observed by the marked reduction in the volume of irradiated normal breast tissue in the high dose region. The ratios of the normal breast tissue volume receiving more than 50%, 80% and 100% of the prescription dose for TMAT versus IMRT were: V50%(TMAT/IMRT) = 78.38%±13.03%, V80%(TMAT/IMRT) = 44.19%±9.04% and V100% (TMAT/IMRT) = 9.96%±7.55%, all p≤0.01. Conclusion: The study is the first demonstration of planning and delivery implementation of a fully dynamic APBI TMAT system with continuous couch motion. TMAT achieved significantly improved dosimetry over noncoplanar IMRT on dose volume parameters correlated with toxicity and cosmetic outcome of APBI. This project was supported by Varian Research Grant.

60 APPLIED LIFE SCIENCES↗

SU-F-BRD-10: Improving Plan Delivery Efficiency of Intensity Modulated Proton Plans with Prioritized Optimization

Purpose: To integrate treatment delivery time into plan optimization in spot scanning intensity modulated proton therapy. Utilizing a dedicated research treatment planning system we present an optimization approach to explore the trade-off between the correlated parameters treatment time and plan quality on an astrocytoma patient case. Methods: The planning system is based on prioritized optimization, a stepwise approach of implementing clinical goals. After each optimization step, dosimetric achievements are turned into hard constraints to maintain the achieved plan quality. Prior achievements can be violated by a so-called slip-factor which allows to study possible trade-offs of conflicting goals. Plan quality is obtained in the first two steps, while the third step optimizes delivery efficiency by working on the spot weight distribution via four alternative Methods: elimination of low weighted spots (1), elimination of spots hardly contributing to PTV dose, followed by reoptimization of the resulting smaller optimization problem (2), reduction of spot weights variance within each energy layer (3), and reduction of the overall spot weight sum (4). Treatment times were calculated assuming either constant or variable beam current depending on the lowest spot weight. Results: Delivery efficiency can be improved remarkably without influencing the plan quality. Absolute time savings depend on the utilized method and facility properties. By varying slip-factor and spot reduction limits, a border of worsening quality is detectable for all methods.Deleting low weighted spots by 10% results in a noticeable decrease in minimum target dose. Further reduction results in more heterogeneous dose distributions and insufficient coverage. Option 2 showed constant plan quality for spot reductions of more than 10%. Conclusion: Including treatment time optimization as a final step into prioritized optimization allows for more efficient treatment plans by redistributing the spot patterns without compromising plan quality, which has to remain the main intent of radiotherapy treatment. The authors report grants from German Research Foundation (DFG) during the conduct of the study.

60 APPLIED LIFE SCIENCES↗

Comparison of the Spectral Characteristics of Chromium-Containing Crystals of the Calcium Gallogermanate Type with Their Structural Features

The molecular refractions and characteristics of the circular dichroism spectra of unactivated and chromium{sub a}ctivated La{sub 3}Ga{sub 5.5}Ta{sub 0.5}O{sub 14}, La{sub 3}Ga{sub 5.5}Nb{sub 0.5}O{sub 14}, La{sub 3}Ga{sub 5}GeO{sub 14}, La{sub 3}Ga{sub 5}SiO{sub 14}, Sr{sub 3}Ga{sub 2}Ge{sub 4}O{sub 14}, and Ca{sub 3}Ga{sub 2}Ge{sub 4}O{sub 14}crystals are compared with their structural parameters. Correlations between the molecular refractions and the structural distortions responsible for the optical activity of crystals and correlations between the characteristics of circular dichroism bands of defects and chromium ions and the interatomic distances in polyhedra and their distortions are found. The calcium gallogermanate structures exhibit a unique correspondence between the electronic configuration of host ions and the local symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin Physics at ANKE-COSY

The COSY accelerator (Jülich, Germany) provides beams of polarised protons and deuterons. The ANKE facility at COSY is equipped with polarised hydrogen and deuterium atomic gas targets. The reactions investigated with polarised probes at ANKE include the deuteron break-up at small and large momentum transfer, the pion production processes in pp and pn collisions and the near-threshold η meson production in dip d-vector p→{sup 3}Heη process. Use of the polarised deuteron beam properties allowed a precision measurement of the η meson mass. The future experimental program covers the study of the elementary pp and pn-interaction with polarised beams up to the maximal COSY energy, and a double polarised measurement of the A {sub x, z }spin correlation parameter in the pN → {pp}{sub s }π process.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamics of the electron thermal diffusivity at improved energy confinement during lower hybrid plasma heating in the FT-2 tokamak

The dynamics of electron heat transport at improved energy confinement during lower hybrid plasma heating in the FT-2 tokamak was studied experimentally. Evolution of the profiles of the electron temperature and density was thoroughly investigated under conditions of fast variation in the plasma parameters. The energy balance in the electron channel is calculated with the help of the ASTRA code by using the measured plasma parameters. Correlation is revealed between the dynamics of electron heat transport and the behavior of small-scale drift turbulence measured using the enhanced scattering correlation diagnostics. The suppression of heat transfer and turbulence agrees well with the increase in the shear of poloidal plasma rotation calculated from experimental data in the neoclassical approximation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A New Method to Measure Crack Extension in Nuclear Graphite Based on Digital Image Correlation

Graphite components, used as moderators, reflectors, and core-support structures in a High-Temperature Gas-Cooled Reactor, play an important role in the safety of the reactor. Specifically, they provide channels for the fuel elements, control rods, and coolant flow. Fracture is the main failure mode for graphite, and breaching of the above channels by crack extension will seriously threaten the safety of a reactor. In this paper, a new method based on digital image correlation (DIC) is introduced for measuring crack extension in brittle materials. Cross-correlation of the displacements measured by DIC with a step function was employed to identify the advancing crack tip in a graphite beam specimen under three-point bending. The load-crack extension curve, which is required for analyzing the R-curve and tension softening behaviors, was obtained for this material. Furthermore, a sensitivity analysis of the threshold value employed for the cross-correlation parameter in the crack identification process was conducted. Finally, the results were verified using the finite element method.

Lai, Shigang↗

Radiation-Induced Degradation of Concrete in NPPs

Nuclear power plants life extensions to 60 and potentially 80 years of operation have renewed interest in long-term material degradation. One material being considered is concrete. Swelling of aggregates driven by radiation induced displacements of atoms is currently considered to be the most probable leading contributor to the radiation induced degradation of concrete mechanical properties. In the biological shields of nuclear plants atom displacements are dominated by neutron contributions while gamma-ray contributions are negligible. For a number of minerals, which are common constituents of aggregates, in concrete it was shown that ~95% of the dpa is generated by neutrons with energies above 0.1 MeV. Neutrons with energies above 1 MeV contribute only ~20 to 25% to the dpa. Therefore, if neutron fluence is used as correlation parameter for the concrete degradation, the neutron fluence energy cut-off of 0.1 MeV should be used. Based on the projected neutron fluence values (E > 0.1 MeV) in the concrete biological shields of the US pressurized water reactor fleet and the available data on radiation effects on concrete, some decrease in mechanical properties of concrete cannot be ruled out during extended operation beyond 60 years.

Remec, Igor↗

Formalism for neutron cross section covariances in the resonance region using kernel approximation

We describe analytical formalism for estimating neutron radiative capture and elastic scattering cross section covariances in the resolved resonance region. We use capture and scattering kernels as the starting point and show how to get average cross sections in broader energy bins, derive analytical expressions for cross section sensitivities, and deduce cross section covariances from the resonance parameter uncertainties in the recently published Atlas of Neutron Resonances. The formalism elucidates the role of resonance parameter correlations which become important if several strong resonances are located in one energy group. Importance of potential scattering uncertainty as well as correlation between potential scattering and resonance scattering is also examined. Practical application of the formalism is illustrated on {sup 55}Mn(n,{gamma}) and {sup 55}Mn(n,el).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Addressing Facility Needs for Concrete Assessment Using Ultrasonic Testing: Mid-year Report

The UFD Gap Analysis to Support Extended Storage of Used Nuclear Fuel (June 30, 2011) emphasizes the need for the development of monitoring techniques and technologies for dry storage cask materials. A high priority is given to the development of 'systems for early detection of confinement boundary degradation.' This requires both new techniques for monitoring and inspection, as well as new measurable parameters to quantify mechanical degradation. The use of Nonlinear Elastic Wave Spectroscopy (NEWS) has been shown to provide sensitive parameters correlating to mechanical degradation in a wide variety of materials. Herein we report upon recent research performed to address the high priority of concrete degradation using a selection of these techniques and compare to a ASTM standard ultrasonic technique. Also reported are the near term plans to continue this research in the remaining FY and into the coming years. This research was conducted at Los Alamos National Laboratory (LANL) in the Acoustics Lab of the Geophysics group in the Earth and Environmental Sciences division, and in collaboration with the Laboratory for Nondestructive Evaluation at the University of the Mediterranean (Aix en Provence, France) and the Electrical Power Research Institute (EPRI). The objective of this research project was to determine the feasibility of using an NDE technique based on non-linear ultrasound for determining the depth and degree of microcracking in the near surface of concrete and to assess the degree of sensitivity of such technique. This objective is reached by the means of combining linear and nonlinear measurements, associated with numerical simulation. We first study the global effect of thermal damage on concrete's linear and nonlinear properties by resonance inspection techniques. We show that standard pulse wave speed techniques are not relevant to extract mechanical properties of concrete. The high sensitivity of measured nonlinearity is shown and serves as a validation tool for the rest of the study, i.e., probing the material nonlinearity at various depths through the use of Time Reversal Elastic Nonlinearity Diagnostic (TREND). The basic idea of probing the material nonlinearity at various depths by changing the frequency is validated by exhibiting a similar trend as nonlinear resonance measurements. We address at the end of this report, the potentialities of applying these procedures to real concrete structures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗