Search NASA⌕ Search

SEARCH · Search NASA

Results for “partition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Numerical Investigation of Observational Flux Partitioning Methods for Water Vapor and Carbon Dioxide

Abstract While yearly budgets of CO 2 flux (F c ) and evapotranspiration (ET) above vegetation can be readily obtained from eddy‐covariance measurements, the separate quantification of their soil (respiration and evaporation) and canopy (photosynthesis and transpiration) components remains an elusive yet critical research objective. In this work, we investigate four methods to partition observed total fluxes into soil and plant sources: two new and two existing approaches that are based solely on analysis of conventional high frequency eddy‐covariance (EC) data. The physical validity of the assumptions of all four methods, as well as their performance under different scenarios, are tested with the aid of large‐eddy simulations, which are used to replicate eddy‐covariance field experiments. Our results indicate that canopies with large, exposed soil patches increase the mixing and correlation of scalars; this negatively impacts the performance of the partitioning methods, all of which require some degree of uncorrelatedness between CO 2 and water vapor. In addition, best performances for all partitioning methods were found when all four flux components are non‐negligible, and measurements are collected close to the canopy top. Methods relying on the water‐use efficiency (W) perform better whenWis known a priori, but are shown to be very sensitive to uncertainties in this input variable especially when canopy fluxes dominate. We conclude by showing how the correlation coefficient between CO 2 and water vapor can be used to infer the reliability of differentWparameterizations.

Environmental Sciences & Ecology↗
DOE OSTI2025

Diel partitioning in microbial phosphorus acquisition in the Sargasso Sea

The daily cycle of photosynthetic primary production at the base of marine food webs is often limited by the availability of scarce nutrients. Microbial competition for these scarce resources can be alleviated insofar as the intensity of nutrient uptake and assimilation activities are distributed heterogeneously across organisms over periodic input cycles. Recent analysis of community transcriptional dynamics in the nitrogen-limited subtropical North Pacific gyre revealed evidence of temporal partitioning of nitrogen uptake and assimilation between eukaryotic phytoplankton, cyanobacteria, and heterotrophic bacteria over day-night cycles. Here, we present results from a Lagrangian metatranscriptomic time series survey in the Sargasso Sea and demonstrate temporally partitioned phosphorus uptake in this phosphorus-limited environment. In the Sargasso, heterotrophic bacteria, eukaryotic phytoplankton, and cyanobacteria express genes for phosphorus assimilation during the morning, day, and dusk, respectively. In conclusion, these results support the generality of temporal niche partitioning as an emergent mechanism that can structure uptake of limiting nutrients and facilitate coexistence of diverse microbes in open ocean ecosystems.

biological oceanography↗
DOE OSTI2024

Quantum Circuit Partitioning for Scalable Noise-Aware Quantum Circuit Re-Synthesis

Re-synthesis techniques are utilized to optimize the quantum circuit. To enable scalable re-synthesis a divide-and-conquer approach is adopted that partitions the circuit into smaller blocks, which are optimized independently. Several algorithms have been proposed to minimize the block number while maximizing the gate count of each block. However, they vary in their performance and may not yield the highest output fidelity. We propose a reinforcement learning-based quantum circuit partitioning framework that incorporates the physical properties of the quantum hardware to maximize the output fidelity post-quantum circuit optimization. To accelerate the training, we also propose a noise injection method that enables on-the-fly optimization in the reinforcement learning environment, independent of the adopted optimization/re-synthesis method at the block level. We evaluate our approach compared to different partitioning techniques using various quantum benchmarks executed on IBM Q Hanoi quantum computer.

Charrwi, Mohammad Walid↗
DOE OSTI2026

CORE-BFS: Communication-Optimized REctangular-partitioned BFS Achieving 160.845 TeraTEPS on Frontier Supercomputer

Distributed Breadth-First Search (BFS) is fundamental to many large-scale graph applications, but its performance on parallel systems is often limited by high communication overhead. This paper presents CORE-BFS, an extremely scalable GPU-based BFS implementation that introduces a unique rectangular 2D partitioning-based design for Frontier supercomputer. To further improve performance, we propose four key optimizations: (1) Rectangular 2D-partition specific data formats that use two compressed row and one compressed column status array bitmaps combined with a Double Compressed Sparse Row (DCSR) format per partition, reducing memory footprint and inter-rank traffic; (2) Adaptive frontier & communication strategy that unifies top-down and bottom-up traversal on the rectangular layout, uses lazy synchronization in top-down levels, and switches variants based on frontier size to minimize communication overhead; (3) Frontier-split degree-aware update that maps frontier vertices to thread-centric, wavefront-centric, and block-centric kernels based on their degree to improve GPU utilization and memory coalescing; (4) Row-reduction pipeline that overlaps bottom-up adjacency list processing with row-wise bitmap reduction to hide inter-rank latency. Together, these techniques increase parallelism while reducing memory and communication overhead. On the Graph500 benchmark, CORE - BFS scales up to 9,248 Frontier nodes with scale-42 graphs and reaches 160.845 TTEPS, delivering a 5.42 × speedup over our previous Frontier implementation.

Yang, Haoshen [Rutgers University]↗
DOE OSTI2024

Implementing One Sided Partitioned Communication in Open MPI

This report introduces partitioned communication, a new MPI 4.0 interface that enables early bird communication by overlapping communication and computation. By partitioning messages into smaller sub-messages, MPI can start partial data transfers early. Performance studies show that the RMA implementation outperforms the Persistent implementation, despite some constraints. This report details a new opt-in RMA implementation, offering a high-performance option for partitioned communication that imposes some additional limitations.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1976

Use of strainrange partitioning to predict high temperature low-cycle fatigue life

The fundamental concepts of the strainrange partitioning approach to high temperature, low low-cycle fatigue are reviewed. Procedures are presented by which the partitioned strainrange versus life relationships for any material can be generated. Laboratory tests are suggested for further verifying the ability of the method of strainrange partitioning to predict life.

Hirschberg, M. H.↗
NASA NTRS1976

Partition function corrections

The vibration-rotation interaction coupling in diatomic molecules is analyzed and first-order expressions for the energy levels are deduced. Corrections to the partition function to account for this coupling are derived. The effects of long-range intermolecular forces due to induced dipole-induced dipole interactions, dipole-induced dipole interactions, charge-dipole interactions, and charge-charge interactions are considered. London's quantized oscillator model of the induced dipole-induced dipole interaction is developed. The partition function including effects of such dispersion forces is derived and is shown to lead to the virial equation of state. For a model combining the hard sphere and long-range attractive type potentials, this is found to lead to the van der Waals equation of state. The equation of state near the critical point is presented in reduced form (thermodynamic variables expressed in units of critical point values). Finally, approximate corrections to the electronic partition functions are derived to account for perturbations of excited electronic states induced by neighboring neutral particles, heavy ions, and fast electron collisions.

Source record↗
NASA NTRS1975

The application of 'strain range partitioning method' to torsional creep-fatigue interaction

The method of strain range partitioning was applied to a series of torsional fatigue tests conducted on tubular 304 stainless steel specimens at 1200 F (649 C). Creep strain was superimposed on cycling strain, and the resulting strain range was partitioned into four components; completely reversed plastic shear strain followed by creep strain, creep strain followed by plastic strain and completely reversed creep strain. Each strain component was related to the cyclic life of the material. The paper describes the experimental procedure used to achieve strain partitioning and the torsional test results are compared to those obtained from axial tests. The damaging effects of the individual strain components were expressed by a linear life fraction rule. The shear strain plastic component showed the least detrimental factor when compared to creep strain reversal by plastic strain. In the latter case, a reduction of torsional fatigue life in the order of magnitude of 1.5 was observed.

Zamrik, S. Y.↗
NASA NTRS1977

Strain partitioning of three alloys in ultrahigh vacuum using the step stress method

The ultrahigh vacuum strain controlled thermal-mechanical strain cycling fatigue behavior of ASTAR 811C, 304 stainless steel and A-286 was studied. The step stress procedure of experimental strainrange partitioning was utilized to partition the inelastic strainranges for tests duplicating conditionings previously reported by TRW. An analytical method is described in which these partitioned inelastic strainrange data can be used to develop the four basic life relationships for these materials.

Kortovich, C. S.↗
NASA NTRS1978

Strainrange partitioning behavior of the nickel-base superalloys, Rene' 80 and in 100

A study was made to assess the ability of the method of Strainrange Partitioning (SRP) to both correlate and predict high-temperature, low cycle fatigue lives of nickel base superalloys for gas turbine applications. The partitioned strainrange versus life relationships for uncoated Rene' 80 and cast IN 100 were also determined from the ductility normalized-Strainrange Partitioning equations. These were used to predict the cyclic lives of the baseline tests. The life predictability of the method was verified for cast IN 100 by applying the baseline results to the cyclic life prediction of a series of complex strain cycling tests with multiple hold periods at constant strain. It was concluded that the method of SRP can correlate and predict the cyclic lives of laboratory specimens of the nickel base superalloys evaluated in this program.

Halford, G. R.↗
NASA NTRS1978

Strainrange partitioning behavior of the nickel-base superalloys, Rene 80 and 100

A study has been made to assess the ability of the method of Strainrange Partitioning (SRP) to both correlate and predict high-temperature low-cycle fatigue lives of nickel-base superalloys for gas turbine applications. SRP is shown to correlate the cyclic lives of the baseline tests to within factors of nearly two. The partitioned strainrage versus life relationships for uncoated Rene 80 and cast IN 100 have also been determined from the ductility normalized-strainrange partitioning equations. These were used to predict the cyclic lives of the baseline tests. Predicted and observed cyclic lives agreed to within factors of nearly three. The life predictability of the method is also verified for cast IN 100 by applying the baseline results to the cyclic-life prediction of a series of complex strain-cycling tests with multiple hold periods at constant strain. It is concluded that the method of SRP can correlate and predict the cyclic lives of laboratory specimens of the nickel-base superalloys evaluated in this program.

Halford, G. R.↗
NASA NTRS1978

A review of experimental studies of crystal/liquid trace element partitioning

Experimental techniques for examining trace-element behavior are reviewed. Applications of these techniques are described for a variety of partition coefficients including: olivine/liquid, subcalcic pyroxene/liquid, calcic pyroxene/liquid, amphibole/liquid, plagioclase/liquid, alkali feldspar/liquid, garnet/liquid, apatite/liquid and whitlockite/liquid, ilmenite/liquid, armalcolite/liquid and pseudobrookite/liquid, magnetite/liquid and spinel/liquid, perovskite/liquid, and melilite/liquid partition coefficients. Partition coefficients between immiscible liquids are discussed and suggestions for further work are noted. A detailed bibliography is included.

Irving, A. J.↗
NASA NTRS1978

The Application of Strainrange Partitioning Method to Multiaxial Creep-Fatigue Interaction

The method of strain range partitioning was applied to a series of torsional fatigue tests conducted on tubular 304 stainless steel specimens at 1200 F (649 C). Creep strain was superimposed on cycling strain, and the resulting strain range was partitioned into four components: (1) completely reversed plastic shear strain, (2) plastic shear strain followed by creep strain, (3) creep strain followed by plastic strain, and (4) completely reversed creep strain. Each strain component was related to the cyclic life of the material. The experimental procedure used to achieve strain partitioning is described, and the torsional test results are compared to those obtained from axial tests. The damaging effects of the individual strain components were expressed by a linear life fraction rule.

Zamrik, S. Y.↗
NASA NTRS1978

Experimental partitioning of rare earth elements and scandium among armalcolite, ilmenite, olivine and mare basalt liquid

An experimental study was carried out to measure partition coefficients for two rare-earth elements (Sm and Tm) and Sc among armalcolite, ilmenite, olivine and liquid coexisting in a system modeled on high-Ti mare basalt 74275. This 'primitive' sample was chosen for study because its major and trace element chemistry as well as its equilibrium phase relations at atmospheric pressure are known from previous studies. Beta-track analytical techniques were used so that partition coefficients could be measured in an environment whose bulk trace element composition is similar to that of the natural basalt. Partition coefficients for Cr and Mn were determined in the same experiments by microprobe analysis. The only equilibrium partial melting model appears to be one in which ilmenite is initially present in the source region but is consumed by melting before segregation of the high-Ti mare basalt liquid from the residue.

Irving, A. J.↗
NASA NTRS1978

Laboratory studies of actinide partitioning relevant to 244Pu chronometry

Actinide partitioning and light lanthanide fractionation have been studied to gain an understanding of Pu chemistry under meteoritic and lunar conditions. The goal of the study was to identify conditions and samples from which chronological information can be retrieved. The laboratory investigations involved particle track radiography of the crystal/liquid partitioning of Th, U and Pu among diopsidic clinopyroxene, whitlockite and liquid. It is found that trivalent Pu plays an important role in partitioning for lunar and most meteoritic conditions. The use of Pu/Nd for relative age assessments is supported to some extent by the investigations; samples with unfractionated U, Th and Nd abundances (relative to average solar system values) may be suitable for Pu chronometry.

Benjamin, T.↗
NASA NTRS1979

Development of partitioning as an aid to spectral signature extension

Lists of spectrally similar LACIE sample segments may be constructed with the use of three basic information types: static, seasonal, and pass-specific variables. All are related directly or indirectly to spectral signature behavior and can be used to define spatial domains over which crop-specific signatures should be extendable. Topics covered include: (1) static spectral stratification; (2) evaluation of static partitions relative to variance control objectives; (3) evaluation of the relative importance of static versus seasonal and pass-specific partitioning variables in spectral variability; and (4) a current perspective on partitioning.

Thomas, R. W.↗
NASA NTRS1979

Partitioning as a cooling rate indicator

The paper presents a mathematical model for describing solute partitioning under continuous cooling conditions. It is shown that solute concentration profiles can be calculated for any cooling rate as a function of temperature provided that the appropriate data on diffusion and partitioning are known. As an example, the model is applied to zirconium partitioning between ilmenite and ulvospinel in a number of Apollo 15 Elbow Crater rocks in order to estimate the rates at which they cooled.

Onorato, P. I.↗
NASA NTRS1982

Analytical prediction of the interior noise for cylindrical models of aircraft fuselages for prescribed exterior noise fields. Phase 2: Models for sidewall trim, stiffened structures and cabin acoustics with floor partition

An airplane interior noise prediction model is developed to determine the important parameters associated with sound transmission into the interiors of airplanes, and to identify apropriate noise control methods. Models for stiffened structures, and cabin acoustics with floor partition are developed. Validation studies are undertaken using three test articles: a ring stringer stiffened cylinder, an unstiffened cylinder with floor partition, and ring stringer stiffened cylinder with floor partition and sidewall trim. The noise reductions of the three test articles are computed using the heoretical models and compared to measured values. A statistical analysis of the comparison data indicates that there is no bias in the predictions although a substantial random error exists so that a discrepancy of more than five or six dB can be expected for about one out of three predictions.

Pope, L. D.↗