SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The radiation pattern of a feed element is approximately described by a simple function (cos theta) to the q power. For a given element spacing of the feed array, simple formulas for estimating the practical value of q when the element is an open-ended rectangular waveguide, an open-ended circular waveguide, a pyramidal horn, or a cigar antenna are given.
The objective of this analysis was to study the effects of the erosion patterns from the introduction of nozzle flaws machined into the nozzle of the SRTMV-N2 (Solid Rocket Test Motor V Nozzle 2). The SRTMV-N2 motor was a single segment static subscale solid rocket motor used to further develop the RSRMV (Redesigned Solid Rocket Motor V Segment). Two flaws or "wedgeouts" were placed in the nozzle inlet parallel to the ply angles of that section to study erosion effects. One wedgeout was placed in the nose cap region and the other placed in the inlet ring on the opposite side of the bondline, separated 180 degrees circumferentially. A coupled CFD (Computational Fluid Analysis)-thermal iterative analytical approach was utilized at the wedgeouts to analyze the erosion profile during the burn time. The iterative CFD thermal approach was applied at five second intervals throughout the motor burn. The coupled fluid thermal boundary conditions were derived from a steady state CFD solution at the beginning of the interval. The derived heat fluxes were then applied along the surface and a transient thermal solution was developed to characterize the material response over the specified interval. Eroded profiles of each of the nozzle's wedgeouts and the original contour were created at each of the specified intervals. The final iteration of the erosion profile showed that both wedgeouts were "washedout," indicating that the erosion profile of the wedgeout had rejoined the original eroded contour, leaving no trace of the wedgeouts post fire. This analytical assessment agreed with post-fire observations made of the SRTMV-N2 wedgeouts, which noted a smooth eroded contour.
The purpose of the investigation described in this paper has been the analysis of large-scale geologic ground patterns in Kansas using ERTS-1 imagery and optical data processing techniques. Optical spatial frequency data provide a repeatable quantitative means of specifying ground pattern characteristics.
Thin film deposition is a fundamental technology for the discovery, optimization, and manufacturing of functional materials. Deposition by molecular beam epitaxy (MBE) typically employs reflection high-energy electron diffraction (RHEED) as a real-time in situ probe of the growing film. However, the state-of-the-art for RHEED analysis during deposition requires human observation. Here, we present an approach using machine learning (ML) methods to monitor, analyze, and interpret RHEED images on-the-fly during thin film deposition. In the analysis workflow, RHEED pattern images are collected at one frame per second and featurized using a pretrained deep convolutional neural network. The feature vectors are then statistically analyzed to identify changepoints; these changepoints can be related to changes in the deposition mode from initial film nucleation to a transition regime, smooth film deposition, and in some cases, an additional transition to a rough, islanded deposition regime. The feature vectors are additionally analyzed via graph analysis and community classification. The graph is quantified as a stabilization plot, and we show that inflection points in the stabilization plot correspond to changes in the growth regime. The full RHEED analysis workflow is termed RHAAPsody and includes data transfer and output to a visual dashboard. We demonstrate the functionality of RHAAPsody by analyzing the precaptured RHEED images from epitaxial depositions of anatase TiO2 on SrTiO3(001) and show that the analysis workflow can be executed in less than 1 s. Our approach shows promise as one component of ML-enabled real-time feedback control of the MBE deposition process.
Slope diffraction analysis of TEM parallel plate guide patterns
Image Pattern Recognition attempts to infer properties of the world from image data. Such capabilities are crucial for making measurements from satellite or telescope images related to Earth and space science problems. Such measurements can be the required product itself, or the measurements can be used as input to a computer graphics system for visualization purposes. At present, the field of image pattern recognition lacks a unified scientific structure for developing and evaluating image pattern recognition applications. The overall goal of this project is to begin developing such a structure. This report summarizes results of a 3-year research effort in image pattern recognition addressing the following three principal aims: (1) to create a software foundation for the research and identify image pattern recognition problems in Earth and space science; (2) to develop image measurement operations based on Artificial Visual Systems; and (3) to develop multiscale image descriptions for use in interactive image analysis.
Ramp patterns in scalar traces such as temperature are the signature of coherent structures. A pseudo-wavelet analysis technique was developed in which ideal saw-tooth patterns of varying size were used as basis functions and fitted to temperature and velocity data. Data recorded from three very different vegetation stands were examined in this study. It was found that the most probable structure duration for the forest canopy was in the range 35-40 s, for the orchard canopy it was 20-25 s and for the maize it was 15-20 s. When expressed in non-dimensional form, the structure duration probability distribution for the maize canopy was about a decade larger than for the forest canopy, with the orchard canopy intermediate. The mean eddy duration versus wind shear relation falls on a narrow band for all three canopies, indicating that wind shear at the canopy top is the determining factor for the scale of the coherent eddies. The inverse of duration and intermittency of coherent structures exhibits a tendency of independence from wind shear at higher wind shear values. Coherent structures transport heat in a more efficient way than do smaller scale, less coherent motions. In all the canopies, the heat flux fractions associated with coherent structures are at least 10% higher than the corresponding time fraction.
A computer-based video digitizer system is described which allows automated tracking of markers placed on a plant surface. The system uses customized software to calculate relative growth rates at selected positions along the plant surface and to determine rates of gravitropic curvature based on the changing pattern of distribution of the surface markers. The system was used to study the time course of gravitropic curvature and changes in relative growth rate along the upper and lower surface of horizontally-oriented roots of maize (Zea mays L.). The growing region of the root was found to extend from about 1 mm behind the tip to approximately 6 mm behind the tip. In vertically-oriented roots the relative growth rate was maximal at about 2.5 mm behind the tip and declined smoothly on either side of the maximum. Curvature was initiated approximately 30 min after horizontal orientation with maximal (50 degrees) curvature being attained in 3 h. Analysis of surface extension patterns during the response indicated that curvature results from a reduction in growth rate along both the upper and lower surfaces with stronger reduction along the lower surface.
In 1969, the U.S. Department of Transportation began an initiative to collect detailed data on household and personal travel, with the most recent surveys being the 2017 and 2022 National Household Travel Surveys. The primary goal of these surveys is to collect trip-based data on the nature and characteristics of personal travel, allowing for an analysis of the relationships between travel patterns and the socio-economic and demographic characteristics of travelers and their households. In addition to the sample households allocated to New York State (NYS) in the national survey, they procured an additional sample of households in the 1995, 2001, 2009, and 2017 surveys. This report presents a comprehensive analysis of travel patterns, vehicle ownership trends, and travel behaviors across NYS regions and the rest of the nation.
Biological processes involve complex hierarchies where composite traits result from multiple component traits. However, holistically understanding of how sets of component traits interact to underpin genotype-to-phenotype relationships is generally lacking. Stomatal density (SD) is a tractable model system for exploring how high-throughput phenotyping (HTP) data could be exploited by a new spatial analysis approach to better understand a developmentally and functionally important trait. SD is a composite trait, resulting from various components related to cell identity and size, which are themselves governed by a series of spatio-developmental processes. Data from 192 recombinant inbred lines of maize [Zea mays (L.)] were analyzed by a new stomatal patterning phenotype (SPP) to (1) describe the average spatial probability distribution of the nearest neighboring stomata; (2) derive a core set of component traits related to cell size, cell packing, and positional probabilities; (3) build a structural equation model of component traits underlying SD; and (4) identify stomatal patterning quantitative trait loci (QTL). The core set of SPP-derived traits explained 74% of the variation in SD. Analyzing SPP component traits allowed some loci previously identified as generic SD QTL to be recognized as specific to lateral versus longitudinal elements of stomatal patterning. Therefore, this study highlights how novel insights can be gained by decomposing a composite trait (e.g., SD) into a set of component traits that were present in HTP data but not previously exploited.
Systematic and detailed analysis of lineament and fracture trace patterns has long been neglected because of the large number of observations involved in such an analysis. Three FORTRAN 4 programs were written to facilitate this manipulation. TRANSFORM converts the initial fracture map data into a format compatible with AZMAP, whose options allow repetitive manipulation of the data for optimization of the analysis. ROSE creates rose diagrams of the fracture patterns suitable for map overlays and tectonic interpretation. Examples are given and further analysis techniques using output from these programs are discussed.
Understanding the impact of climate stressors on photovoltaic (PV) backsheet degradation in real-use conditions is critical to improve the accelerated testing exposures, extend the backsheet lifetime, and increase the confidence in PV reliability. Here, in this work, a total of 33 PV module backsheets were retrieved from six climatic zones worldwide with 2 - 28 years of exposure. These modules included five types of backsheet air-side materials (or outer layer): poly(vinylidene fluoride) (PVDF), poly(tetrafluoroethylene-co-hexafluoropropylene-co-vinylidene fluoride) (THV), poly(vinyl fluoride) (PVF), poly(ethylene terephthalate) (PET), and polyamide (PA). Attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) was used to identify air-side materials. The degradation induced color change, gloss loss, and chemical material changes analyzed using optical microscopy, differential scanning calorimetry (DSC), scanning electron microscopy (SEM), colorimetry (yellowness index (YI)), and gloss measurements. PVDF, THV, and PVF air-side layer backsheets, in particular PVF, had minimal degradation in the air-side layer appearance and chemical structures after exposure in different climatic zones. The PET air-side backsheets exhibited obvious color increase (22.55 YI units after about 9 years exposure) and the PA/PA/PA backsheets showed large gloss loss (up to 76.4 %) relative to the unexposed backsheets. Severe cracks between cells that penetrated through the entire thickness of backsheets are observed on PA/PA/PA backsheets after 4-6 years of exposure in 6 climatic zones. The current indoor exposure standards were not sufficient to identify this degradation type. However, fluoropolymer based PV backsheets showed lower levels of degradation predictors and increased climatic resistance. Specific samples (PVF) showed little change from baseline after 28 years of outdoor exposure.
NASTRAN-GAP programs for analyzing antenna radiation patterns of reflectors distorted by gravity and thermal loads
A conditioning method was used to investigate the orientational responses of ducks as affected by manipulations of the stellar patterns in a planetarium. Under simulated natural skies it was possible to train a bird to a particular direction successively under all positions of the rotating sphere at a constant latitude. The responses were independent of the phase relationships between local time, season, and appearance of the sky provided the bird had been trained under the particular sector of the sphere some time before.
There are no author-identified significant results in this report.
Explore the source record for details and available documents.
Analysis of geological structures observed on ERTS-1 multispectral imagery of Missouri
This paper investigates the relationship between microstructural features and small-angle scattering (SAS) patterns in Ni-based superalloys using a combined phase-field and SAS simulation approach coupled with microstructure analyses. The simulated SAS patterns accurately capture key experimental observations previously reported in the literature, including the time-dependent transition from circular to square-shaped precipitates and the development of anisotropic SAS patterns. Importantly, our analysis reveals the correlations between characteristic length scales extracted from SAS profiles and microstructural descriptors, such as precipitate size and inter-precipitate distance. These findings provide a comprehensive understanding of the link between SAS profiles and microstructure evolution in Ni-based superalloys, offering valuable insights for materials characterization and design.