Search NASA⌕ Search

SEARCH · Search NASA

Results for “planet detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Holographic Vortex Coronagraph

A holographic vortex coronagraph (HVC) has been proposed as an improvement over conventional coronagraphs for use in high-contrast astronomical imaging for detecting planets, dust disks, and other broadband light scatterers in the vicinities of stars other than the Sun. Because such light scatterers are so faint relative to their parent stars, in order to be able to detect them, it is necessary to effect ultra-high-contrast (typically by a factor of the order of 1010) suppression of broadband light from the stars. Unfortunately, the performances of conventional coronagraphs are limited by low throughput, dispersion, and difficulty of satisfying challenging manufacturing requirements. The HVC concept offers the potential to overcome these limitations.

Palacios, David↗
NASA NTRS2020

One Planet or Two Planets? The Ultra-sensitive Extreme-magnification Microlensing Event KMT-2019-BLG-1953

We present the analysis of a very high-magnification (A ~ 900) microlensing event KMT-2019-BLG-1953. A single-lens single-source (1L1S) model appears to approximately delineate the observed light curve, but the residuals from the model exhibit small but obvious deviations in the peak region. A binary-lens (2L1S) model with a mass ratio of q ~ 2 × 10^−3 improves the fits by Δχ2 = 181.8, indicating that the lens possesses a planetary companion. From additional modeling by introducing an extra planetary lens component (3L1S model) and an extra source companion (2L2S model), it is found that the residuals from the 2L1S model further diminish, but claiming these interpretations is difficult due to the weak signals with Δχ2 = 16.0 and 13.5 for the 3L1S and 2L2L models, respectively. From a Bayesian analysis, we estimate that the host of the planets has a mass of M(host)=0.31 (+0.37, -0.17) Mꙩ and that the planetary system is located at a distance of D9L)=7.04 (+1.10, -1.33) kpc toward the Galactic center. The mass of the securely detected planet is M(p)=0.64 (+0.76, -0.35) M(J). The signal of the potential second planet could have been confirmed if the peak of the light curve had been more densely observed by follow-up observations, and thus the event illustrates the need for intensive follow-up observations for very high-magnification events even in the current generation of high-cadence surveys.

Cheongho Han↗
NASA NTRS1999

Infalling Planetesimals in Pre-Main Sequence Stellar Systems

These are exciting times in the study of planetary system formation with a steadily expanding inventory of exo-planet detections, and imaging of dust disks around nearby young and main sequence stars. While these discoveries imply that our Solar System is far from unique, linking the data for the protoplanetary and debris disks to mature planetary systems requires a demonstration that disk evolution proceeds via planetesimal production and growth to the formation of planets. Theoretical studies of planet formation indicate that planetesimals grow, via runaway accretion, to lunar-sized (approx. = 2000 km) embryos in 10(exp 5) years. Recent gas giant planet formation studies have suggested that most of the action in planet formation occurs over 1-16 Myr, with formation of planets similar to Jupiter in t less than 10 Myr, within the time interval that infrared (IR) and optical emission line studies have demonstrated that circumstellar material remains detectable around both solar mass and intermediate mass stars. Direct imaging of exo-planetesimals is not feasible with current and foreseeable technology, since such bodies have substantially less surface area than micron-sized grains distributed in a disk, and thus are inefficient IR emitters. However, such bodies may be indirectly detectable.

Grady, Carol A.↗
DOE OSTI2024

TOI-2374 b and TOI-3071 b: two metal-rich sub-Saturns well within the Neptunian desert

ABSTRACT We report the discovery of two transiting planets detected by the Transiting Exoplanet Survey Satellite (TESS), TOI-2374 b and TOI-3071 b, orbiting a K5V and an F8V star, respectively, with periods of 4.31 and 1.27 d, respectively. We confirm and characterize these two planets with a variety of ground-based and follow-up observations, including photometry, precise radial velocity monitoring and high-resolution imaging. The planetary and orbital parameters were derived from a joint analysis of the radial velocities and photometric data. We found that the two planets have masses of (57 ± 4) M⊕ or (0.18 ± 0.01) MJ, and (68 ± 4) M⊕ or (0.21 ± 0.01) MJ, respectively, and they have radii of (6.8 ± 0.3) R⊕ or (0.61 ± 0.03) RJ and (7.2 ± 0.5) R⊕ or (0.64 ± 0.05) RJ, respectively. These parameters correspond to sub-Saturns within the Neptunian desert, both planets being hot and highly irradiated, with Teq ≈ 745 K and Teq ≈ 1812 K, respectively, assuming a Bond albedo of 0.5. TOI-3071 b has the hottest equilibrium temperature of all known planets with masses between 10 and 300 M⊕ and radii less than 1.5 RJ. By applying gas giant evolution models we found that both planets, especially TOI-3071 b, are very metal-rich. This challenges standard formation models which generally predict lower heavy-element masses for planets with similar characteristics. We studied the evolution of the planets’ atmospheres under photoevaporation and concluded that both are stable against evaporation due to their large masses and likely high metallicities in their gaseous envelopes.

Hacker, Alejandro (ORCID:0009000994520181)↗
NASA NTRS2006

The Fourier-Kelvin Stellar Interferometer a Low Complexity, Low Cost Space Mission for High-Resolution Astronomy and Direct Exoplanet Detection

The Fourier-Kelvin Stellar Interferometer (FKSI) is a mission concept for a spacecraft-borne nulling interferometer for high-resolution astronomy and the direct detection of exoplanets and assay of their environments and atmospheres. FKSI is a high angular resolution system operating in the near to midinfrared spectral region and is a scientific and technological pathfinder to the Darwin and Terrestrial Planet Finder (TPF) missions. The instrument is configured with an optical system consisting, depending on configuration, of two 0.5 - 1.0 m telescopes on a 12.5 - 20 m boom feeding a symmetric, dual Mach- Zehnder beam combiner. We report on progress on our nulling testbed including the design of an optical pathlength null-tracking control system and development of a testing regime for hollow-core fiber waveguides proposed for use in wavefront cleanup. We also report results of integrated simulation studies of the planet detection performance of FKSI and results from an in-depth control system and residual optical pathlength jitter analysis.

Barry, R. K.↗
NASA NTRS2004

Nulling interferometers: the importance of systematic errors and the X-Array configuration

The nulling interferometers proposed for planet detection are arrays of collector telescopes whose amplitudes and phases are carefully controlled to generate a null response at the star. Perturbations in the amplitude and phase response of the instrument lead to time-dependent fluctuations in the stellar leakage that can mimic a planet signal. Understanding these non-linear systematic errors is important, since they drive most of the instrument requirements for missions such as the Terrestrial Planet Finder and Darwin. We show that 'amplitude-phase' errors are the dominant source of instrument noise. They are unaffected by the technique of phase chopping, increase rapidly at short wavelengths, are largely independent of the size and transmission efficiency of the collector optics, and depend only weakly on the nulling configuration and distance to the target system. Detection of an Earth around a G-type star like the sun requires -1.5 nm of path control and -0.1% control of the amplitude, integrated over all frequencies, including DC. This paper also introduces the X-Array - a new nulling configuration with 4 collectors and a central combiner arranged in an X pattern. This has a number of advantages over the standard dual Bracewell layout, and over other configurations that have been proposed

Dubovitsky, Serge↗
NASA NTRS2017

NIAC Phase II Orbiting Rainbows: Future Space Imaging with Granular Systems

Inspired by the light scattering and focusing properties of distributed optical assemblies in Nature, such as rainbows and aerosols, and by recent laboratory successes in optical trapping and manipulation, we propose a unique combination of space optics and autonomous robotic system technology, to enable a new vision of space system architecture with applications to ultra-lightweight space optics and, ultimately, in-situ space system fabrication. Typically, the cost of an optical system is driven by the size and mass of the primary aperture. The ideal system is a cloud of spatially disordered dust-like objects that can be optically manipulated: it is highly reconfigurable, fault-tolerant, and allows very large aperture sizes at low cost. This new concept is based on recent understandings in the physics of optical manipulation of small particles in the laboratory and the engineering of distributed ensembles of spacecraft swarms to shape an orbiting cloud of micron-sized objects. In the same way that optical tweezers have revolutionized micro- and nano-manipulation of objects, our breakthrough concept will enable new large scale NASA mission applications and develop new technology in the areas of Astrophysical Imaging Systems and Remote Sensing because the cloud can operate as an adaptive optical imaging sensor. While achieving the feasibility of constructing one single aperture out of the cloud is the main topic of this work, it is clear that multiple orbiting aerosol lenses could also combine their power to synthesize a much larger aperture in space to enable challenging goals such as exo-planet detection. Furthermore, this effort could establish feasibility of key issues related to material properties, remote manipulation, and autonomy characteristics of cloud in orbit. There are several types of endeavors (science missions) that could be enabled by this type of approach, i.e. it can enable new astrophysical imaging systems, exo-planet search, large apertures allow for unprecedented high resolution to discern continents and important features of other planets, hyperspectral imaging, adaptive systems, spectroscopy imaging through limb, and stable optical systems from Lagrange-points. Furthermore, future micro-miniaturization might hold promise of a further extension of our dust aperture concept to other more exciting smart dust concepts with other associated capabilities. Our objective in Phase II was to experimentally and numerically investigate how to optically manipulate and maintain the shape of an orbiting cloud of dust-like matter so that it can function as an adaptable ultra-lightweight surface. Our solution is based on the aperture being an engineered granular medium, instead of a conventional monolithic aperture. This allows building of apertures at a reduced cost, enables extremely fault-tolerant apertures that cannot otherwise be made, and directly enables classes of missions for exoplanet detection based on Fourier spectroscopy with tight angular resolution and innovative radar systems for remote sensing. In this task, we have examined the advanced feasibility of a crosscutting concept that contributes new technological approaches for space imaging systems, autonomous systems, and space applications of optical manipulation. The proposed investigation has matured the concept that we started in Phase I to TRL 3, identifying technology gaps and candidate system architectures for the space-borne cloud as an aperture.

Quadrelli, Marco B.↗
NASA NTRS1986

Astrometric Telescope Facility - Status report

The advent of the Space Station Program has provided an unexpected opportunity for the Astrometric Telescope Facility (ATF) study program by providing a potential long-duration on-orbit serviceable platform. It required a concept change for ATF from a free-flyer observatory to a Space-Station-based Observatory. The program was sent in this new direction at the start of fiscal year 1985, and program plans including study schedules and science and technical requirements are being revised and defined. The facility is designed to be versatile and capable of fulfilling the primary goal of planet detection, and to be highly useful for other astrophysics observations. Basically the ATF observing program is a long-duration plan requiring repetitive observations of single stars over a one to two decade period. These repetitive observations are needed to provide data necessary to conclusively determine the existence (or nonexistence) of planets of the Uranus and Neptune class in extrasolar planetary systems.

Nishioka, K.↗
NASA NTRSDate not supplied

Primary Mission Threshold Crossing Events in the TESS SPOC Transit Search

We present an overview of the single- and multiple-sector results of the Science Processing Operations Center (SPOC) transit search in the primary Transiting Exoplanet Survey Satellite (TESS) mission. TESS was designed to survey bright stars in the greater Solar neighborhood in search of transiting exoplanets. Data were acquired at a 2-minute cadence for 16,000-20,000 pre-selected target stars in each 28-day observation sector and processed in the SPOC pipeline at NASA Ames Research Center. The photometry pipeline produced a systematic error corrected light curve for each target star. Light curves were searched for transiting planet signatures by sector for all target stars, and separately for target stars observed in multiple sectors. Potential transit signals for which the transiting planet detection threshold was exceeded and a series of transit consistency tests were passed are referred to as Threshold Crossing Events (TCEs). We highlight the full TCE population and the population of SPOC TCEs that were later identified as TESS Objects of Interest (TOIs). Characteristics of the TCE populations implied by limb-darkened transiting planet model fits are also presented. SPOC pipeline data products are delivered to the Mikulski Archive for Space Telescopes (MAST)(http://archive.stsci.edu/missions-and-data/tess) for access by the community. Funding for the TESS Mission has been provided by the NASA Science Mission Directorate.

TESS↗
NASA NTRS2018

HOMES: Holographic Method for Exoplanet Spectroscopy

The search for habitable exoplanets in the "neighborhood," that is within 10 parsecs (pc),invites new observational techniques, because telescopes available today have significant limitations. For example, gravitational micro-lensing is a deep field method that has little or no utility within 10 pc. Photometry of transits reduces the availability of exoplanets to a probability of approximately a 1%, and fewer than 1 out of 100 earth twins would ever be seen. For the 1% of exoplanets seen in transit, spectra of albedos cannot be taken.Even more limiting, Doppler shift studies are indirect and cannot characterize exoplanets other than by their orbits and masses through stellar radial velocity (RV). Moreover, RV by Doppler shift cannot detect planets in orbits on a plane perpendicular to our line of sight. Astrometry can be used to measure stellar orbital wobble for those exoplanetary systems in the plane perpendicular to our line of sight, as was contemplated for the cancelled NASA SIM mission 1 and rests now with ESA's GAIA2. In either case, the exoplanets detected by stellar RV or astrometry would not be directly observed, so the assumption that the three phases of water could exist does not answer a key question of habitability. Is there water on the exoplanet? Moreover, the discovery of water on an exoplanet in the habitable zone, exciting though it would be, is insufficient to determine just how habitable the exoplanet might possibly be. Like Goldilocks' porridge - there are many other ingredients beyond water alone in a life-sustaining soup.We propose a new species of optical telescope that has as one of its capabilities the high resolution spectrographic characterization of exoplanets on stars within 10 pc of the observatory. To achieve this performance specification, we propose to break with convention by taking advantage of an optical technology unknown until relatively recent times: the hologram. In this Report we show how holograms used in primary and secondary can extract spectrograms from exoplanets at distances reaching 33 light years from our solar system. We describe a notional space telescope using these novel optics that could make its observations in a space deployment scenario.

Ditto, Thomas↗
NASA NTRS2005

First Light from Extrasolar Planets and Implications for Astrobiology

The first light from an extrasolar planet was recently detected. These results, obtained for two transiting extrasolar planets at different infrared wavelengths, open a new era in the field of extrasolar planet detection and characterization because for the first time we can now detect planets beyond the solar system directly. Using the Spitzer Space Telescope at 24 microns, we observed the modulation of combined light (star plus planet) from the HD 209458 system as the planet disappeared behind the star during secondary eclipse and later re-emerged, thereby isolating the light from the planet. We obtained a planet-to-star ratio of 0.26% at 24 microns, corresponding to a brightness temperature of 1130 + / - 150 K. We will describe this result in detail, explain what it can tell us about the atmosphere of HD 209458 b, and discuss implications for the field of astrobiology. These results represent a significant step on the path to detecting terrestrial planets around other stars and in understanding their atmospheres in terms of composition and temperature.

Richardson, L. Jeremy↗
NASA NTRS1985

Planetary searches using optical astrometric interferometers

The detectability of planets is discussed, and observations made with an astrometric interferometer (AI) at Mount Wilson are presented. Planets are detectable as a result of their periodic perturbation of the position of a central observable star. This detection requires relative astrometric accuracies of about 3 x 10 to the -4th for Jovian planets and about 3 x 10 to the -7th arcsec for terrestrial planets. The principles governing astrometric interferometry are explained, and it is conjectured that a two-color optical AI on earth should be capable of about 0.0001 arcsec rms accuracy for stars brighter than magnitude 7-10; small one-color space systems should achieve at least 0.00001 arcsec. Owing to atmospheric turbulence, two-color systems permit correction every few milliseconds for the random wavefront tilt. A 3.4-meter baseline interferometer on Mount Wilson has demonstrated arcsec rms fluctuations of about 0.02 for 1-sec samples. Space-based optical astrometric interferometry is also discussed.

Staelin, D. H.↗
NASA NTRS2005

Progress in broadband infrared nulling technology for TPF

TPF-I has set for itself a host of challenging technical milestones along its path to demonstrating the feasibility of infrared nulling for planet detection Progress in each of these areas of technical development will be reviewed as well as progress in meeting the overarching technical milestones.

extra-solar planets↗
NASA NTRS2004

Precursor Science for the Terrestrial Planet Finder

This document outlines a path for the development of the field of extrasolar planet research, with a particular emphasis on the goals of the Terrestrial Planet Finder (TPF). Over the past decade, a new field of research has developed, the study of extrasolar planetary systems, driven by the discovery of massive planets around nearby stars. The planet count now stands at over 130. Are there Earth-like planets around nearby stars? Might any of those planets be conducive to the formation and maintenance of life? These arc the questions that TPF seeks to answer. TPF will be implemented as a suite of two space observatories, a 6-m class optical coronagraph, to be launched around 20 14, and a formation flying mid-infrared interferometer, to be launched sometime prior to 2020. These facilities will survey up to 165 or more nearby stars and detect planets like Earth should they be present in the 'habitable zone' around each star. With observations over a broad wavelength range, TPF will provide a robust determination of the atmospheric composition of planets to assess habitability and the presence of life. At this early stage of TPF's development, precursor observational and theoretical programs are essential to help define the mission, to aid our understanding of the planets that TPF could discover, and to characterize the stars that TPF will eventually study. This document is necessarily broad in scope because the significance of individual discoveries is greatly enhanced when viewed in thc context of the field as a whole. This document has the ambitious goal of taking us from our limited knowledge today, in 2004, to the era of TPF observations in the middle of the next decade. We must use the intervening years wisely. This document will be reviewed annually and updated as needed. The most recent edition is available online at http://tpf.jpl.nasa.gov/ or by email request to lawson@hucy.jpl.nasa.gov

Lawson, P. R.↗
NASA NTRS2007

Starlight Nulling Technology at the Jet Propulsion Laboratory

The current interests in extra-solar planet detection and space-based and ground-based interferometry for astronomical observations has led to the development of a number of nulling instrument designs at the Jet Propulsion Laboratory (JPL) and elsewhere. This paper summarizes briefly JPL's efforts in nulling interferometry to date and consists of illustrations of some key nulling activities. Basic layouts of nulling testbeds are described and key applications discussed.

Terrestrial Planet Finder↗
NASA NTRS2002

Residual wave front phase estimation in the reimaged lyot plane for the eclipse coronographic telescope

Coronagraphs for extra-solar planet detection remove diffracted stellar light through the combination of a coronagraphic mask and a Lyot stop. When the entrance pupil contains a nearly perfect wave fiont, most of the stellar light is absorbed at the mask. Light scattered around the spot due to mid- and high-spatial frequency phase errors in the pupil appears at the Lyot plane as speckles whose amplitudes are proportional to the local wave front phase residuals. The speckles scale with optical wavelength but are not radially smeared. The Eclipse deformable mirror (DM) can be used to modify the Lyot amplitude distribution, providing a simple means of estimating the residual phase content and controlling the wave front. To reduce the detrimental noise carried by uncontrollable high-spatial frequency wave front components, theLyot plane signal is filtered at the science plane to pass only the controllable spatial frequencies that contribute to the dark hole. The Lyot stop is then reimaged onto a detector. We demonstrate through simulations that this approach signiscantly improves the signal-to-noise ratio of the planet measurement.

coronagraph wave front sensing wave front control↗
NASA NTRS2012

Quasi-Monolithic Structures for Spaceflight Using Hydroxide-Catalysis Bonding

Future space-based missions will take measurements of the universe with unprecedented results. To do this, these missions will require materials and bonding techniques with ever-increasing stability in order to make their measurements. As an example, the Laser Interferometer Space Antenna (LISA) will detect and observe gravitational waves in the 0.1 mHz to 1 Hz frequency range with strain sensitivities on the order of 10(exp -21) at its most sensitive frequency. To make these measurements, critical components such as the optical bench or telescope support structure, will need to have path-length stabilities of better than 1 pm/(square root)Hz. The baseline construction method for the LISA optical bench is to affix fused silica optical components to a Zerodur baseplate using hydroxide-catalysis bonding (HCB). HCB is a recently developed technique that allows the bonding of glasses, some metals, and silicon carbide with significant strength and stability with a bond thickness of less than a few micrometers. In addition, a wide range of surface profiles can be bonded using only a small amount of hydroxide solution. These characteristics make HCB ideal for adhering optical components in complex optical systems. In addition to being used to construct the LISA optical bench, the HCB technique shows great promise for constructing other structures such as hollow retroreflectors to be used for lunar laser ranging, or a visible nulling coronograph to be used for exo-planet detection. Here we present construction techniques that could be used to make an optical bench, hollow retroreflector, nulling coronograph, or other quasi-monolithic structures using HCB. In addition, we present dimensional stability results of an optical bench that was made using HCB, as well as HCB strength measurements.

Preston, Alix↗
NASA NTRS2021

The Far Ultraviolet M-dwarf Evolution Survey. I. The Rotational Evolution of High-energy Emissions

M-dwarf stars are prime targets for exoplanet searches because of their close proximity and favorable properties for both planet detection and characterization. However, the potential habitability and atmospheric characterization of these exoplanetary systems depends critically on the history of high-energy stellar radiation from X-rays to NUV, which drive atmospheric mass loss and photochemistry in the planetary atmospheres. With the Far Ultraviolet M-dwarf Evolution Survey, we have assessed the evolution of the FUV radiation, specifically eight prominent emission lines, including Lyα, of M-dwarf stars with stellar rotation period and age. We demonstrate tight power-law correlations between the spectroscopic FUV features, and measure the intrinsic scatter of the quiescent FUV emissions. The luminosity evolution with rotation of these spectroscopic features is well-described by a broken power law, saturated for fast rotators, and decays with increasing Rossby number, with a typical power-law slope of −2, although likely shallower for Lyα. Our regression fits enable FUV emission-line luminosity estimates relative to bolometric from known rotation periods to within ∼0.3 dex, across eight distinct UV emission lines, with possible trends in the fit parameters as a function of source layer in the stellar atmosphere. Our detailed analysis of the UV luminosity evolution with age further shows that habitable-zone planets orbiting lower-mass stars experience much greater high-energy radiative exposure relative the same planets orbiting more massive hosts. Around early- to mid-M dwarfs, these exoplanets, at field ages, accumulate up to 10–20× more EUV energy, relative to modern Earth. Moreover, the bulk of this UV exposure likely takes place within the first Gyr of the stellar lifetime.

J Sebastian Pineda↗