Search NASA⌕ Search

SEARCH · Search NASA

Results for “plant engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

An Innovative Feedback Controls Design Approach for Aero Engines

The paper describes a feedback controls design approach for a generic regional jet turbofan engine, which can be adapted to aero engines in general. To demonstrate this approach, linear models for control design are generated at different operating conditions from a full envelope nonlinear simulation created with the NASA Glenn Research Center-developed Toolbox for the Modeling and Analysis of Thermodynamic Systems. The primary objective is to design a single feedback controller that achieves good performance, without the need of developing scheduled control designs to cover the engine operating envelope. An additional objective is to progressively design more robust controllers that can perform under large variations in plant dynamics to also cover control for engine limits and potentially for some off nominal or even damaged conditions.

Kopasakis, George↗
NASA NTRS1980

Coolidge solar powered irrigation pumping project

A 150 kW solar thermal electric power plant which includes over 2100 square meters of parabolic trough type collectors and an organic Rankine cycle turbine engine was constructed on an irrigated farm. The plant is interconnected with the electrical utility grid. Operation is providing an evaluation of equipment performance and operating and maintenance requirements as well as the desirability of an on farm location.

Larson, D. L.↗
NASA NTRS1951

Preliminary investigation of the control of a gas-turbine engine for a helicopter / Richard P. Krebs

An analog investigation of the power plant for a gas-turbine powered helicopter indicates that currently proposed turbine-propeller engine controls are satisfactory for helicopter application. Power increases from one-half to full rated at altitudes from sea level to 15,000 feet could be made in less than 4 seconds with either the rotor or propellers absorbing the engine power.

ENGINES, CONTROL - TURBINE-PROPELLER ENGINES↗
NASA NTRSDate not supplied

Space Crop Production Gaps and Challenges

As astronauts venture farther from Earth, and stay for longer periods, the space food system will increase in importance. Crop production can supplement a pre-packaged space diet to provide nutrition and dietary variety for space crews. In future missions, bioregenerative approaches may be used to generate a larger percentage of the diet, as well as help to reduce life support system burdens and resupply from Earth. Plants may also provide behavioral health benefits to crew members living in the isolated, confined environment of a space habitat. A number of unique challenges exist for growth of plants in microgravity and on other reduced gravity surfaces like the moon and Mars. Testing plant growth inside the Veggie and Advanced Plant Habitat (APH) chambers on the International Space Station is allowing us to understand the impacts of gravity and spaceflight on crop growth, nutritional content, acceptability, and the importance of plants to astronauts living and working away from Earth. We are also gaining a better understanding of food safety concerns and the behavior of space plant microbiomes and plant pathogens, but major gaps in knowledge remain. As we move from research towards operational space crop production to enable exploration, there are numerous gaps in technology, knowledge, and practice related to space crop growth that must be addressed. Research and development in key focus areas such as effective water and nutrient delivery at variable gravity levels, autonomous plant health monitoring, growth system cleaning and disinfection, and selection of ideal space crops are needed to fill these gaps. Breeding or engineering custom space crops may impact areas including plant growth and development, plant physiology, produce nutrition, organoleptic acceptability, and post-harvest characteristics, and these may further enable space crop production scenarios. Space crop challenges are multifaceted and require diverse interdisciplinary teams working together to develop effective solutions. Solving these requires an array of skill sets from across the biological and physical sciences, engineering, and human social sciences. Solutions to help ensure food security off-Earth may also translate to more sustainable terrestrial crop production approaches, and regular dialog between industry, academia, and government organizations working in related fields benefit all. Additional help can come from engagement with student researchers at various levels through courses, participatory science projects, and open science activities which can provide useful data. Global coordination and integration between space agencies and partners will be essential.

Gioia Donna Massa↗
NASA NTRSDate not supplied

Space Crop Production Gaps and Challenges

As astronauts venture farther from Earth, and stay for longer periods, the space food system will increase in importance. Crop production can supplement a pre-packaged space diet to provide nutrition and dietary variety for space crews. In future missions, bioregenerative approaches may be used to generate a larger percentage of the diet, as well as help to reduce life support system burdens and resupply from Earth. Plants may also provide behavioral health benefits to crew members living in the isolated, confined environment of a space habitat. A number of unique challenges exist for growth of plants in microgravity and on other reduced gravity surfaces like the moon and Mars. Testing plant growth inside the Veggie and Advanced Plant Habitat (APH) chambers on the International Space Station is allowing us to understand the impacts of gravity and spaceflight on crop growth, nutritional content, acceptability, and the importance of plants to astronauts living and working away from Earth. We are also gaining a better understanding of food safety concerns and the behavior of space plant microbiomes and plant pathogens, but major gaps in knowledge remain. As we move from research towards operational space crop production to enable exploration, there are numerous gaps in technology, knowledge, and practice related to space crop growth that must be addressed. Research and development in key focus areas such as effective water and nutrient delivery at variable gravity levels, autonomous plant health monitoring, growth system cleaning and disinfection, and selection of ideal space crops are needed to fill these gaps. Breeding or engineering custom space crops may impact areas including plant growth and development, plant physiology, produce nutrition, organoleptic acceptability, and post-harvest characteristics, and these may further enable space crop production scenarios. Space crop challenges are multifaceted and require diverse interdisciplinary teams working together to develop effective solutions. Solving these requires an array of skill sets from across the biological and physical sciences, engineering, and human social sciences. Solutions to help ensure food security off-Earth may also translate to more sustainable terrestrial crop production approaches, and regular dialog between industry, academia, and government organizations working in related fields benefit all. Additional help can come from engagement with student researchers at various levels through courses, participatory science projects, and open science activities which can provide useful data. Global coordination and integration between space agencies and partners will be essential.

Gioia Massa↗
NASA NTRS1986

Quality assurance procedures for environmental control and monitoring in plant growth facilities. Report of the North Central Regional 101 Committee on Growth Chamber Use

This report includes procedures for ensuring the quality of the environment provided for plant growth in controlled environment facilities. Biologists and engineers may use these procedures for ensuring quality control during experiments or for ensuring quality control in the design of plant growth facilities. Environmental monitoring prior to and during experiments is included in these procedures. Specific recommendations cover control, acquisition, and calibration for sensor types for the separate parameters of radiation (light), temperature, humidity, carbon dioxide, and air movement.

NASA Discipline Number 61-10↗
NASA NTRS1980

Potential impacts of Brayton and Stirling cycle engines

Two engine technologies (Brayton cycle and Stirling cycle) are examined for their potential economic impact and fuel utilization. An economic analysis of the expected response of buyers to the attributes of the alternative engines was performed. Hedonic coefficients for vehicle fuel efficiency, performance and size were estimated for domestic cars based upon historical data. The marketplace value of the fuel efficiency enhancement provided by Brayton or Stirling engines was estimated. Under the assumptions of 10 years for plant conversions and 1990 and 1995 as the introduction data for turbine and Stirling engines respectively, the comparative fuel savings and present value of the future savings in fuel costs were estimated.

Heft, R. C.↗
NASA NTRS1994

Damage-Mitigating Control of Space Propulsion Systems for High Performance and Extended Life

A major goal in the control of complex mechanical system such as spacecraft rocket engine's advanced aircraft, and power plants is to achieve high performance with increased reliability, component durability, and maintainability. The current practice of decision and control systems synthesis focuses on improving performance and diagnostic capabilities under constraints that often do not adequately represent the materials degradation. In view of the high performance requirements of the system and availability of improved materials, the lack of appropriate knowledge about the properties of these materials will lead to either less than achievable performance due to overly conservative design, or over-straining of the structure leading to unexpected failures and drastic reduction of the service life. The key idea in this report is that a significant improvement in service life could be achieved by a small reduction in the system dynamic performance. The major task is to characterize the damage generation process, and then utilize this information in a mathematical form to synthesize a control law that would meet the system requirements and simultaneously satisfy the constraints that are imposed by the material and structural properties of the critical components. The concept of damage mitigation is introduced for control of mechanical systems to achieve high performance with a prolonged life span. A model of fatigue damage dynamics is formulated in the continuous-time setting, instead of a cycle-based representation, for direct application to control systems synthesis. An optimal control policy is then formulated via nonlinear programming under specified constraints of the damage rate and accumulated damage. The results of simulation experiments for the transient upthrust of a bipropellant rocket engine are presented to demonstrate efficacy of the damage-mitigating control concept.

Ray, Asok↗
NASA NTRS1987

Pattern recognition techniques for failure trend detection in SSME ground tests

The Space Shuttle Main Engine (SSME) is a complex power plant. To evaluate its performance 1200 hot-wire ground tests have been conducted, varying in duration from 0 to 500 secs. During the test some 500 sensors are sampled every 20 ms. The sensors are generally bounded by red lines so that an excursion beyond could lead to premature shutdown. In 27 tests it was not possible to effect an orderly premature shutdown, resulting in major incidents with serious damage to the SSME and test stand. The application of pattern recognition are investigated to detect SSME performance trends that may lead to major incidents. Based on the sensor data a set of (n) features is defined. At any time during the test, the state of the SSME is given by a point in the n-dimensional feature space. The history of a test can now be represented as a trajectory in the n-dimensional feature space. Portions of the normal trajectories and failed test trajectories would lie in different regions of the n-dimensional feature space. The latter can now be partitioned into regions of normal and failed tests. Thus, it is possible to examine the trajectory of a test in progress and predict if it is going into the normal or failure region.

Choudry, A.↗
NASA NTRS1987

Lunar fiberglass: Properties and process design

A Clemson University ceramic engineering design for a lunar fiberglass plant is presented. The properties of glass fibers and metal-matrix composites are examined. Lunar geology is also discussed. A raw material and site are selected based on this information. A detailed plant design is presented, and summer experiments to be carried out at Johnson Space Center are reviewed.

Dalton, Robert↗
NASA NTRS1962

Jet Interference Effects on a Model of a Single-Engine Four Jet V/STOL Airplane at Mach Numbers from 0.60 to 1.00

An investigation was conducted in the Langley 16-foot transonic tunnel to determine the interference from four exhaust jets on the aerodynamic characteristics of a model of a V/STOL airplane. The single- engine four-jet turbofan power plant of the airplane was simulated by inducing tunnel airflow through two large side inlets and injecting the decomposition products of hydrogen peroxide into the internal flow. The heated gas mixture was exhausted through four nozzles located on the sides of the fuselage under the wing, two near the wing leading edge and two forward of the trailing edge; the nozzles were deflected downward 1.5 deg and outward 5.0 deg to simulate cruise conditions. The wing of the model was a clipped delta with leading-edge sweep of 40 deg, aspect ratio of 3.06, taper ratio of 0.218, thickness-chord ratio of 0.09 at the root and 0.07 at the tip, and 10 deg negative dihedral. Aerodynamic and longitudinal stability coefficients were obtained for the model with the tail removed, and for horizontal-tail incidences of 0 deg and -5 deg. Data were obtained at Mach numbers from 0.60 to 1.00, angles of attack from 0 deg to 12 deg, and with jet total-pressure ratios up to 3.1. Jet operation generally caused a decrease in lift, an increase in pitching-moment coefficient, and a decrease in longitudinal stability at subsonic speeds. The jet interference effects on drag were detrimental at a Mach number of 0.60 and favorable at higher speeds for cruising-flight attitudes.

Schmeer, James W.↗
NASA NTRS1998

Flight Tests on a Fiber Optic Temperature Sensor

For aircraft engine control, one key parameter to detect on an airplane is the exhaust gas temperature (EGT). Presently, thermocouples are used to perform this measurement. These electrical sensors perform adequately; however, fully utilizing the benefits of optical sensors requires replacing electrical architectures with optical architectures. Part of this requires replacing electrical sensors with optical sensors, such as the EGT sensor chosen for these tests. The objective of the development and testing of this prototype sensor system was to determine the feasibility of operating an optical sensor in a hostile aircraft environment. The fiber optic sensor system was developed to measure temperatures from 20C to 600C in an aircraft environment and was utilized to monitor the EGT of an OV-10D aircraft engine. The sensor has successfully flown over 50 hours and proven to be immune to surface deterioration of the optical element (located inside the sensor head) and able to withstand and operate in normal and sustained severe flight conditions where forces on the airplane exceeded 4 g's. Potential commercial uses for this sensor include monitoring temperature for aeropropulsion system control, military vehicle and naval engine control, conventional and nuclear power plant monitoring and industrial plan monitoring where EMI issues are critical.

Tuma, Margaret L.↗
NASA NTRS1981

Silicon production process evaluations

Chemical engineering analysis of the HSC process (Hemlock Semiconductor Corporation) for producing silicon from dichlorosilane in a 1,000 MT/yr plant was continued. Progress and status for the chemical engineering analysis of the HSC process are reported for the primary process design engineering activities: base case conditions (85%), reaction chemistry (85%), process flow diagram (60%), material balance (60%), energy balance (30%), property data (30%), equipment design (20%) and major equipment list (10%). Engineering design of the initial distillation column (D-01, stripper column) in the process was initiated. The function of the distillation column is to remove volatile gases (such as hydrogen and nitrogen) which are dissolved in liquid chlorosilanes. Initial specifications and results for the distillation column design are reported including the variation of tray requirements (equilibrium stages) with reflux ratio for the distillation.

Source record↗
NASA NTRS1982

Silicon production process evaluations

Chemical engineering analyses involving the preliminary process design of a plant (1,000 metric tons/year capacity) to produce silicon via the technology under consideration were accomplished. Major activities in the chemical engineering analyses included base case conditions, reaction chemistry, process flowsheet, material balance, energy balance, property data, equipment design, major equipment list, production labor and forward for economic analysis. The process design package provided detailed data for raw materials, utilities, major process equipment and production labor requirements necessary for polysilicon production in each process.

Source record↗
NASA NTRS1989

Engineering sciences design. Design and implementation of components for a bioregenerative system for growing higher order plants in space

The primary goal was to address specific needs in the design of an integrated system to grow higher plants in space. With the needs defined, the emphasis was placed on the design and fabrication of devices to meet these needs. Specific attention was placed on a hand-held harvester, a nutrient concentration sensor, an air-water separator, and a closed-loop biological system simulation.

Nevill, Gale E., Jr.↗
NASA NTRS1978

Advanced subsystems development

The concept design for a small (less than 10 MWe) solar thermal electric generating plant was completed using projected 1985 technology. The systems requirements were defined and specified. The components, including an engineering prototype for one 15 kWe module of the generating plant, were conceptually designed. Significant features of the small solar thermal power plant were identified as the following: (1) 15 kWe Stirling-cycle engine/alternator with constant power output; (2) 10 meter point-focusing paraboloidal concentrator with cantilevered cellular glass reflecting panels; (3) primary heat pipe with 800 C output solar cavity receiver; (4) secondary heat pipe with molten salt thermal energy storage unit; (5) electric energy transport system; and (6) advanced battery energy storage capability.

Livingston, F. R.↗