Search NASA⌕ Search

SEARCH · Search NASA

Results for “plasma crystals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

2nd and 3rd order spectral energy corrections with penumbral de-blurring methodology for opacity platform used on the National Ignition Facility

The Opacity Spectrometer (OpSpec) used in the National Ignition Facility’s opacity experiments measures x-ray spectra from 0.9 to 2.1 keV from the different experimental regions: the backlight source, emission source, and the absorption region with the transmission calculated from these regions. The OpSpec designs have gone through several iterations to help improve the signal-to-noise ratio, remove alternate crystal plane reflections, and improve spectral resolution, which helps to increase the validity of the opacity measurements. However, the source spans well outside the current working spectral range, and higher-order reflections are intrinsic to the crystal, which increases the overall signal seen in the data regions. The recorded data are the convolution of 1st order transmission, higher-order reflections, and the penumbra blurring. In conclusion, this work represents the details for deconvolving the 2nd and 3rd order spectral energy corrections with a penumbral de-blurring to correct the relative measurement of x-ray intensity of different spectral energies and further analysis of datasets relevant to the opacity experiments.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Broadband sum-frequency generation of spectrally incoherent pulses

We study and demonstrate the nonlinear frequency conversion of broadband optical pulses from 1053 nm to 351 nm using sum-frequency generation with a narrowband pulse at 526.5 nm. The combination of angular dispersion and noncollinearity cancels out the wave-vector mismatch and its frequency derivative, yielding an order-of-magnitude increase in spectral acceptance compared to conventional tripling. This scheme can support the nonlinear frequency conversion of broadband spectrally incoherent nanosecond pulses generated by high-energy lasers and optical parametric amplifiers to mitigate laser−plasma instabilities occurring during interaction with a target. The experimental results obtained with KDP crystals are in excellent agreement with modeling, demonstrating the generation of spectrally incoherent pulses with a bandwidth larger than 10 THz at 351 nm.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Impact of krypton irradiation on a single crystal tungsten: Multi-modal X-ray imaging study

Understanding microstructural and strain evolutions induced by noble gas production in the nuclear fuel matrix or plasma-facing materials is crucial for designing next generation nuclear reactors, as they are responsible for volumetric swelling and catastrophic failure. In this paper we describe a multimodal approach combining synchrotron-based nanoscale X-ray imaging techniques with atomic-scale electron microscopy techniques for mapping chemical composition, morphology and lattice distortion in a single crystal W induced by Kr irradiation. We report that Kr-irradiated single crystal W undergoes surface deformation, forming Kr containing cavities. Furthermore, positive strain fields are observed in Kr-irradiated regions, which lead to compression of underlying W matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A tutorial on high-order harmonic generation in atoms, molecules, and condensed matter

This tutorial introduces strong-field-driven high-order harmonics, their experimental generation and characterization techniques, and their main applications including attosecond pulse generation and ultrafast spectroscopy of the target material. We begin from the use of atomic targets, where the first high-order harmonic generation (HHG) experiments were realized in the late 1980s. Then, we briefly discuss the basics of the microscopic generation mechanism and how various steps of the mechanism were exploited in applications such as generating isolated attosecond pulses and probing molecular orbitals. We introduce and describe the standard experimental approaches for condensed phase HHG, where we discuss unique technical challenges of the use of solid-state materials, such as the mitigation of plasma formation and laser damage. We cover the fundamentals of high-harmonic spectroscopy in condensed matter systems, such as wide bandgap dielectrics, semiconductors, liquid media, and 2D-crystals. We provide some examples of rapidly emerging spectroscopic capabilities, such as for probing crystal symmetries, Berry phases, and associated non-trivial topological properties of the source material. Finally, we provide an overview of the research field, including some of the challenges, opportunities, and open questions.

Attosecond pulses↗
DOE OSTI2023

Nonthermal plasma synthesis of silicon carbonitride

Abstract The use of a low‐temperature plasma for the synthesis of amorphous silicon carbonitride (SiCN) nanoparticles enables the realization of sintered bulk samples with high thermal stability. Amorphous SiCN nanoparticles are produced from a mixture of silane, methane, and ammonia utilizing a mid‐pressure, radio‐frequency, continuous flow reactor. Particle characterization shows that the nanoparticles are largely amorphous with some crystalline silicon and silicon carbide domains <10 nm in size. Compositional tuning, controlled by varying the precursor flow rates, coupled with the uniform mixing of elements at the nanoscale, results in samples that resist crystallization even when sintered at temperatures as high as 2000°C. This study suggests that the low‐temperature plasma synthesis of nanoparticles has great potential to produce bulk structural materials for application in harsh environments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Adapting High-Resolution X-Ray Microcalorimeter Spectrometers to Transform MFE Plasma Diagnostics

The aim of this project was to begin the transformation of magnetic fusion energy (MFE) X-ray diagnostics by applying detector technology developed over the past several decades by the astrophysics community. We installed and operated an X-ray microcalorimeter detector system under fusion-relevant plasma conditions at the Madison Symmetric Torus (MST). X-ray microcalorimeter spectrometers combine the best characteristics of instrumentation currently available on fusion devices: the high spectral resolution of crystal spectrometers (2 eV) and broadband coverage provided by pulse-height analysis systems. These spectrometers have small port-access requirements, a key advantage for future MFE experiments. This new plasma diagnostic technique will satisfy the need for multispecies impurity ion data by providing absolute measurements of impurity core accumulation, and it will provide the core impurity ion temperature. This project was a joint effort between Lawrence Livermore National Laboratory (LLNL) and researchers at the Wisconsin Plasma Physics Laboratory (WiPPl) at the University of Wisconsin–Madison (UW–Madison). Megan E. Eckart is the principal investigator at LLNL, which is funded separately from UW–Madison. This final report fulfills the reporting obligation of the UW–Madison effort.

Den Hartog, Daniel J. [Department of Physics, Univ↗
DOE OSTI2020

Inference of experimental radial impurity transport on Alcator C-Mod: Bayesian parameter estimation and model selection

We present a fully Bayesian approach for the inference of radial profiles of impurity transport coefficients and compare its results to neoclassical, gyrofluid and gyrokinetic modeling. Using nested sampling, the Bayesian Impurity Transport InferencE (BITE) framework can handle complex parameter spaces with multiple possible solutions, offering great advantages in interpretative power and reliability with respect to previously demonstrated methods. BITE employs a forward model based on the pySTRAHL package, built on the success of the well-known STRAHL code [Dux, IPP Report, 2004], to simulate impurity transport in magnetically-confined plasmas. In this paper, we focus on calcium (Ca, Z=20) Laser Blow-Off injections into Alcator C-Mod plasmas. Multiple Ca atomic lines are diagnosed via high-resolution X-ray Imaging Crystal Spectroscopy and Vacuum Ultra-Violet measurements. We analyze a sawtoothing I-mode discharge for which neoclassical and turbulent (quasilinear and nonlinear) predictions are also obtained. Here, we find good agreement in diffusion across the entire radial extent, while turbulent convection and density profile peaking are estimated to be larger in experiment than suggested by theory. Efforts and challenges associated with the inference of experimental pedestal impurity transport are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Influence of Particle Size on Apparent Diffusivity During Spark Plasma Sintering of Crystalline Powders

Abstract:: A theoretical framework is presented to determine an apparent diffusivity D during powder sintering and further elucidate the underlying interrelation between D and shrinkage behaviors of powders. Furthermore, to eliminate the influence of crystalline defects that are typically present in raw powders, complete crystallization of metallic glass powders is performed to allow the investigation of the influence of particle size solely on powder densification. Furthermore, to validate the framework developed, Ti{sub 40.6}Zr{sub 9.4}Cu{sub 37.5}Ni{sub 9.4}Sn{sub 3.1} crystalline alloy powders constituting particles with different sizes are examined to establish a correlation between D and the sintering behaviors of the powders. The findings show that the value of the apparent diffusivity D increases with the increasing particle size, which accelerates powder densification during spark plasma sintering. Furthermore, the results quantitatively support the argument that particle size can affect atomic diffusion during powder sintering.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Polarization-induced 2D hole gases in pseudomorphic undoped GaN/AlN heterostructures on single-crystal AlN substrates

A high-conductivity two-dimensional (2D) hole gas is the enabler of wide-bandgap p-channel transistors. Compared to commonly used AlN template substrates with high dislocation densities, the recently available single-crystal AlN substrates are promising to boost the speed and power handling capability of p-channel transistors based on GaN/AlN 2D hole gases (2DHGs) thanks to the much lower dislocation densities and the absence of thermal boundary resistance. Using plasma-assisted molecular beam epitaxy, we report the observation of polarization-induced high-density 2DHGs in undoped pseudomorphic GaN/AlN heterostructures on the single-crystal AlN substrates with high structural quality and atomic steps on the surface. The high-density 2DHG persists down to cryogenic temperatures with a record high mobility exceeding 280 cm 2 /V s and a density of 2.2 × 10 13 /cm 2 at 10 K. These results shed light on aspects of improving 2D hole mobilities and indicate significant potential of GaN/AlN 2DHG grown on bulk AlN substrates for future high performance wide-bandgap p-channel transistors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Correlation between ferroelectricity and ferroelectric orthorhombic phase of Hf x Zr 1-x O 2 thin films using synchrotron x-ray analysis

The change in the interplanar spacing ( d -spacing) including the ferroelectric orthorhombic (O) phase in the low-temperature fabricated Hf x Zr 1-x O 2 (HZO) films was studied using synchrotron grazing-incidence wide-angle x-ray scattering analysis. The 10-nm-thick HZO films were fabricated by thermal and plasma-enhanced atomic layer deposition (TH- and PE-ALD) methods using H 2 O gas and O 2 plasma as oxidants, respectively, and a post-metallization annealing (PMA) was performed at 300–400 °C. The d -spacing of the mixture of (111)-, (101)-, and (111)-planes of O, tetragonal (T), and cubic (C) phases, respectively, for the TH- and PE-ALD HZO films increased up to 2.99 Å with an increase in PMA temperature, while the d -spacing estimated by conventional x-ray diffraction was 2.92 Å regardless of the PMA temperature. The remanent polarization (2 P r = P r + - P r - ) of the HZO films increased as the PMA temperature increased. It is clear that the 2 P r value satisfied a linear relationship as a function of the d -spacing of O(111)/T(101)/C(111) phases. Furthermore, the wake-up effect was found to depend on the ferroelectric O phase formation. The wake-up effect was significantly reduced in both the TH- and PE-ALD HZO films after the PMA at 400 °C due to the increase in the ferroelectric O phase formation. The leakage current density ( J )–electric field properties of the PE-ALD HZO film with the lowest d -spacing were divided into three steps, such as low, middle, and large J values, in the wake-up (10 3 cycles), pristine (10 0 cycle), and fatigue (10 7 cycles) states, respectively. Therefore, an analysis of the ferroelectric O phase is very important for understanding the ferroelectricity including endurance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Multi-physics modeling of tungsten collector probe samples during the WEST C4 He campaign

Abstract We describe the results of a multi-scale, multi-physics modeling assessment of SOLPS-ITER, hPIC2, RustBCA and Xolotl, in which five single-crystal tungsten (W) samples were placed in a reciprocating collector probe and exposed to helium (He) plasma in the WEST fusion device. In our models, we considered a pure (100 %) He plasma, as well as one with oxygen (O) present (95% He 5% O) corresponding to the impurity concentration estimated during the C4 He campaign in WEST. Our SOLPS simulations approximately match experimental reciprocating Langmuir probe plasma measurements of plasma density and temperature. Using these plasma parameters as input, hPIC2 and RustBCA predict that the presence of oxygen impurities lead to a 15%–20% decrease in ion and heat fluxes to the surface, and an order of magnitude higher sputtering yields (compared with a pure He plasma). Xolotl predictions for the response of tungsten to plasma surface interactions (PSIs) agree with experimental LAMS analysis, and indicate large near-surface He concentrations, which quickly decay with depth. Our model also shows an increasing role of erosion—in removing the near-surface He—with time. Overall, slightly higher retention is predicted for tungsten exposed to a pure He plasma, with the largest differences in the near-surface gas content caused by the large oxygen-induced erosion. This highlights the important role that impurities play in PSI. Therefore, future work will focus on providing a fully self-consistent description of oxygen (and oxides, etc.) in our models, through multi-species implementation in GITR and inclusion of oxygen and tungsten oxide formation in Xolotl.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Atmospheric Pressure Plasma Deposition of TiO2: A Review

Atmospheric pressure plasma (APP) deposition techniques are useful today because of their simplicity and their time and cost savings, particularly for growth of oxide films. Among the oxide materials, titanium dioxide (TiO2) has a wide range of applications in electronics, solar cells, and photocatalysis, which has made it an extremely popular research topic for decades. Here, we provide an overview of non-thermal APP deposition techniques for TiO2 thin film, some historical background, and some very recent findings and developments. First, we define non-thermal plasma, and then we describe the advantages of APP deposition. In addition, we explain the importance of TiO2 and then describe briefly the three deposition techniques used to date. We also compare the structural, electronic, and optical properties of TiO2 films deposited by different APP methods. Lastly, we examine the status of current research related to the effects of such deposition parameters as plasma power, feed gas, bias voltage, gas flow rate, and substrate temperature on the deposition rate, crystal phase, and other film properties. The examples given cover the most common APP deposition techniques for TiO2 growth to understand their advantages for specific applications. In addition, we discuss the important challenges that APP deposition is facing in this rapidly growing field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effects of cyclic plasma heating on surface damage of micro-porous tungsten

The operating temperature window of solid tungsten (W) is dictated by its Ductile to Brittle Transition Temperature (DBTT) and re-crystallization temperature; roughly between 300-1300 °C. The brittleness of W at lower temperatures is exasperated when it undergoes recrystallization. We investigate here the thermal shock resistance of micro-porous W as a meta-material fabricated in a 3D open-cell network structure. We present experimental results for the effects of cyclic high-enthalpy arc-jet plasma on surface damage in three testing categories. Observed damage includes surface ablation of asperities, melting and solidification of W-fuzz on samples that have been exposed to a prior helium plasma, and micro-cracks at ligament triple junctions. Scanning electron microscope (SEM) observations show more micro-cracking on 54% and 23% foams compared to the 43% ones. In all tested samples, thermal expansion/contraction displacements were accommodated by ligament rotation and a network of micro-cracks. Furthermore, no large through-thickness crack were observed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Advanced low blaze angle x-ray gratings via nanoimprint replication and plasma etch

We developed a new method of making ultra-low blaze angle diffraction gratings for x-ray applications. The method is based on reduction of the blaze angle of a master grating by nanoimprint replication followed by a plasma etch. A master blazed grating with a relatively large blaze angle is fabricated by anisotropic wet etching of a Si single crystal substrate. The surface of the master grating is replicated by a polymer material on top of a quartz substrate by nanoimprinting. Then a second nanoimprinting is performed using the 1st replica as a mold to replicate the saw-tooth surface into a resist layer on top of a Si grating substrate. A reactive ion etch is used to transfer the grating grooves into the Si substrate. The plasma etch provides reduction of the groove depth by a factor defined by the ratio of the etch rates for the resist and Si. We demonstrate reduction of the blaze angle of a master grating by a factor of 5 during fabrication of a 200 lines/mm blazed grating with a blaze angle of 0.2°. We investigated the quality and performance of the fabricated low blaze angle gratings and evaluate process accuracy and reproducibility. The new blaze angle reduction method preserves the planarity of the optical surface of the grating substrate and at the same time provides improvement in the grating groove quality during the reduction process.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Modeling of a 43 GHz microplasma within a photonic crystal

The electron density (n e ) and argon metastable density (1 s 5 ) of a 43GHz microplasma are obtained using the zero-dimensional plasma kinetics solver (ZDPlasKin®) for an incident power of 160 and 1000mW and argon pressures of 10–600Torr (1.3 ×10 3 to 8.0 × 10 4 Pa). These simulations are compared with previously published experimental data. To determine the self-consistent electric field in the modeled plasma, the three-dimensional millimeter wave fields are computed as a function of electron density using ANSYS EM19.2, HFSS®. This electromagnetic field model is coupled to ZDPlasKin such that any increase in the simulated plasma density correctly attenuates the simulated electric field within the microplasma. The electron density is found to be sensitive to argon gas temperature, so a two-zone temperature model was needed to obtain agreement with experimental measurements. The temperature in the central core of the microplasma was determined by a previous experimental study. That temperature was used as an input to the model for the simulation of volume recombination losses. The outer regions of the microplasma are assumed to be in equilibrium with the walls (300K). This second temperature was used in the model to determine diffusion losses. The modeled electron and metastable densities are of the order 10 20 and 10 18 m –3 , respectively. This is in good agreement with those measured experimentally as long as the two-zone temperature model is used. In the absence of a hot gas core, the modeled three-body recombination rates are excessive and the simulation severely under-predicts the electron density and over-estimates the metastable density. We conclude that the millimeter wave microplasma has a hot core (2500K at 600 Torr) that rarifies the argon gas and effectively reduces three-body recombination. Furthermore, this allows one to achieve high electron density on the order of 10 20 m –3 with only 100mW of wave power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Large Single Crystals of V 1– x Mo x O 2 from a Two-Step Chemical Vapor Transport Synthesis

This article details the synthesis of single crystals with the chemical formulas V 1-x Mo x O 2 ( 0 ≤ x ≤ 0.6) using the chemical vapor transport method at high temperatures (850 to 950 °C). These compounds are of interest due to the special relationship between their structure and electronic properties. Understanding this relationship will help guide future efforts in designing energy-saving devices. While some of these compounds have been synthesized before, this is the first time their synthesis has been reported for such a wide range of compounds in the form of bulk single crystals. The single crystal form is required for detailed characterization of the compounds. The materials were characterized chemically and structurally in order to validate the precise chemical compositions that were reported. Characterization methods included x-ray diffraction, inductively-coupled plasma atomic emission spectroscopy, and electron dispersive spectroscopy. The synthesis method is tunable, and the introduction of multiple steps both overcome the previous chemical challenges precluding synthesis of high molybdenum content crystals and allow for the creation of larger single crystals that were otherwise possible. The crystals synthesized this way are suitable for specialized measurements for determining the precise physical properties and atomic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Epitaxial Regrowth and Hole Shape Engineering for Photonic Crystal Surface Emitting Lasers (PCSELs)

In the present research, epitaxial regrowth by molecular beam epitaxy (MBE) is investigated as a fabrication process for void-semiconductor photonic crystal (PhC) surface emitting lasers (PCSELs). The PhC is patterned by electron beam lithography (EBL) and inductively coupled plasma (ICP) etch and is subsequently regrown by molecular beam epitaxy to embed a series of voids in bulk semiconductor. Experiments are conducted to investigate the effects of regrowth on air-hole morphology. The resulting voids have a distinct teardrop shape with the radius and depth of the etched hole playing a very critical role in the final regrown void’s dimensions. We demonstrate that specific hole diameters can encourage deposition to the bottom of the voids or to their sidewalls, allowing us to engineer the shape of the void more precisely as is required by the PCSEL design. A 980 nm InGaAs quantum well laser structure is optimized for low threshold lasing at the design wavelength and full device structures are patterned and regrown. An optically pumped PCSEL is demonstrated from this process.

36 MATERIALS SCIENCE↗