Magnetic Topology at Venus: New Insights Into the Venus Plasma Environment
Explore the source record for details and available documents.
Shaosui Xu↗
SEARCH · Search NASA
Results for “plasma environments”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Characterizing ISS Charging Environments with On-Board Ionospheric Plasma Measurements
Charging of the International Space Station (ISS) is dominated by interactions of the biased United States (US) 160 volt solar arrays with the relatively high density, low temperature plasma environment in low Earth orbit. Conducting surfaces on the vehicle structure charge negative relative to the ambient plasma environment because ISS structure is grounded to the negative end of the US solar arrays. Transient charging peaks reaching potentials of some tens of volts negative controlled by photovoltaic array current collection typically occur at orbital sunrise and sunset as well as near orbital noon. In addition, surface potentials across the vehicle structure vary due to an induced v x B (dot) L voltage generated by the high speed motion of the conducting structure across the Earth's magnetic field. Induced voltages in low Earth orbit are typically only approx.0.4 volts/meter but the approx.100 meter scale dimensions of the ISS yield maximum induced potential variations ofapprox.40 volts across the vehicle. Induced voltages are variable due to the orientation of the vehicle structure and orbital velocity vector with respect to the orientation of the Earth's magnetic field along the ISS orbit. In order to address the need to better understand the ISS spacecraft potential and plasma environments, NASA funded development and construction of the Floating Potential Measurement Unit (FPMU) which was deployed on an ISS starboard truss arm in August 2006. The suite of FPMU instruments includes two Langmuir probes, a plasma impedance probe, and a potential probe for use in in-situ monitoring of electron temperatures and densities and the vehicle potential relative to the plasma environment. This presentation will describe the use of the FPMU to better characterize interactions of the ISS with the space environment, changes in ISS charging as the vehicle configuration is modified during ISS construction, and contributions of FPMU vehicle potential and plasma environment measurements to investigations of on-orbit anomalies in ISS systems.
Minow, Jospeh I.↗
A Comparison of ARTEMIS Data with the Lunar Plasma Design Environment for NASA Crewed Missions
NASA’s Gateway will provide the capability for sustaining a human presence in cis-lunar space. Operations of the Gateway will include spacecraft dockings, extra vehicular activities (EVA), and high-power solar arrays. NASA’s experience with the International Space Station highlighted the importance of evaluating spacecraft charging effects for such operations. For crewed spacecraft, which tend to employ the use of dielectric surfaces in this dynamic plasma environment, reliance on spacecraft charging simulation packages, such as the NASA/Air Force Spacecraft Charging Analyzer Program (Nascap-2k) [Mandell et al., 2006] and Spacecraft Plasma Interaction System (SPIS) [Roussel et al., 2008], is required to understand the risks to hardware and humans. The variability in the lunar plasma environment as the Moon revolves around the Earth, lunar wake effects, and a strong dependency on photoemission and secondary electron emission creates challenges for spacecraft charging analysis. The Design Specification for Natural Environments (DSNE) [NASA, MSFC] is the primary resource for space environments affecting NASA’s crewed missions, and the DSNE provides plasma environments in a standard form for input into simulation packages. NASA developed the existing lunar plasma environment using data from Geotail [Nishida, 1994] along with published lunar plasma wake models [Halekas et al., 2005] based on Lunar Prospector. Since 2011, NASA’s twin Acceleration Reconnection Turbulence & Electrodynamics of Moon’s Interaction with the Sun (ARTEMIS) satellites [Angelopoulos, 2010] have been collecting high resolution plasma and fields observations within the lunar plasma environment providing a much larger dataset of the plasma properties in cislunar space. This research compares the existing lunar plasma environment definition with ARTEMIS data and makes recommendations on the refinement of the environment definition for future lunar missions.
ARTEMIS mission↗
Survey of the plasma electron environment of Jupiter: A view from Voyager
The plasma environment within Jupiter's bow shock is considered in terms of the in situ, calibrated electron plasma measurements made between 10 eV and 5.95 keV by the Voyager plasma science experiment (PLS). Measurements were analyzed and corrected for spacecraft potential variations; the data were reduced to nearly model independent macroscopic parameters of the local electron density and temperature. It is tentatively concluded that the radial temperature profile within the plasma sheet is caused by the intermixing of two different electron populations that probably have different temporal histories and spatial paths to their local observation. The cool plasma source of the plasma sheet and spikes is probably the Io plasma torus and arrives in the plasma sheet as a result of flux tube interchange motions or other generalized transport which can be accomplished without diverting the plasma from the centrifugal equator. The hot suprathermal populations in the plasma sheet have most recently come from the sparse, hot mid-latitude "bath" of electrons which were directly observed juxtaposed to the plasma sheet.
Scudder, J. D.↗
Plasma Sterilization Technology for Spacecraft Applications
The application of plasma gas technology to sterilization and decontamination of spacecraft components is considered. Areas investigated include: effective sterilizing ranges of four separate gases; lethal constituents of a plasma environment; effectiveness of plasma against a diverse group of microorganisms; penetrating efficiency of plasmas for sterilization; and compatibility of spacecraft materials with plasma environments. Results demonstrated that plasma gas, specifically helium plasma, is a highly effective sterilant and is compatible with spacecraft materials.
Fraser, S. J.↗
A survey of the plasma electron environment of Jupiter - A view from Voyager
A survey of the plasma environment within Jupiter's bow shock is given in terms of the in situ calibrated electron plasma measurements made between 10 eV and 5.95 keV by the Voyager Plasma Science Experiment (PLS). The measurements are analyzed and corrected for spacecraft potential variations; the data are reduced to nearly model independent macroscopic parameters of the local electron density and temperature. The electron parameters are derived without reference to or internal calibration from the positive ion measurements made in the PLS experiment. Extensive statistical and direct comparisons with other determinations of the local plasma charge density indicate clearly that the analysis procedures have successfully and routinely discriminated between spacecraft sheath and ambient plasmas.
Scudder, J. D.↗
Dusty Plasmas in Planetary Magnetospheres Award
This is my final report for the grant Dusty Plasmas in Planetary Magnetospheres. The funding from this grant supported our research on dusty plasmas to study: a) dust plasma interactions in general plasma environments, and b) dusty plasma processes in planetary magnetospheres (Earth, Jupiter and Saturn). We have developed a general purpose transport code in order to follow the spatial and temporal evolution of dust density distributions in magnetized plasma environments. The code allows the central body to be represented by a multipole expansion of its gravitational and magnetic fields. The density and the temperature of the possibly many-component plasma environment can be pre-defined as a function of coordinates and, if necessary, the time as well. The code simultaneously integrates the equations of motion with the equations describing the charging processes. The charging currents are dependent not only on the instantaneous plasma parameters but on the velocity, as well as on the previous charging history of the dust grains.
Horanyi, Mihaly↗
Development of the VOLT-A shuttle experiment
The NASA Lewis Research Center (LeRC) is investigating potential problems associated with the operation of high voltage solar cell arrays in the space plasma environment. At high voltages, interactions between the solar array and the space plasma could result in unacceptable levels of electrical discharge (arcing) and/or parasitic losses (current drains from the array to the plasma). The objective of the Voltage Operating Limit Tests (VOLT-A) Shuttle bay experiment is to characterize space plasma/solar cell panel interactions in low earth orbit. VOLT-A consists of an experiment plate subassembly which contains four solar panels, an electronics subassembly and a Langmuir probe subassembly mounted on an MPESS carrier. During a given 8.25 hour data taking period (5-1/2 continuous orbits), the solar panels, which represent state-of-the-art solar cell technologies, will be sequentially subjected to bias voltages in steps ranging from minus 626 V to plus 313 V. Appropriate measurements will be made at each voltage to characterize arcing and parasitic losses. Corresponding measurements of the plasma environment (plasma density, electron temperature and neutral density) will also be made. Data will be recorded on an on-board tape recorder for subsequent data reduction and analysis.
Bifano, W. J.↗
Development of the VOLT-A Shuttle experiment
The NASA Lewis Research Center (LeRC) is investigating potential problems associated with the operation of high voltage solar cell arrays in the space plasma environment. At high voltages, interactions between the solar array and the space plasma could result in unacceptable levels of electrical discharge (arcing) and/or parasitic losses (current drains from the array to the plasma). The objective of the Voltage Operating Limit Tests (VOLT-A) Shuttle bay experiment is to characterize space plasma/solar cell panel interactions in low earth orbit. VOLT-A consists of an experiment plate subassembly which contains four solar panels, an electronics subassembly and a Langmuir probe subassembly mounted on an MPESS carrier. During a given 8.25 hour data taking period (5-1/2 continuous orbits), the solar panels, which represent state-of-the-art solar cell technologies, will be sequentially subjected to bias voltages in steps ranging from minus 626 V to plus 313 V. Appropriate measurements will be made at each voltage to characterize arcing and parasitic losses. Corresponding measurements of the plasma environment (plasma density, electron temperature and neutral density) will also be made. Data will be recorded on an on-board tape recorder for subsequent data reduction and analysis.
Bifano, William J.↗
Modification of spacecraft potentials by plasma emission
The ion engine operations on Applied Technology Satellite 6 (ATS-6) altered the charge state of the spacecraft, changing the spacecraft surface potentials with respect to the distant plasmas. Plasma emission in quiet environments (plasma temperatures below 1 keV) caused the spacecraft potential to shift from a few volts positive to a few volts negative. A net ion current is emitted in such cases. The emission of a plasma or beam in energetic environments (plasma temperatures in the 5-10-keV range) in sunlight caused larger changes. Typical equilibrium potentials for ATS-6 in such environments were on the order of a hundred volts negative, with variations in potential across the spacecraft surface of comparable magnitude. Engine operations under such conditions raised the mainframe potential to near zero volts, and discharged the differential potentials on the dielectric surfaces. Plasma emission by the plasma bridge was an effective method of discharging kilovolt potentials in eclipse.
Olsen, R. C.↗
Particle Access and Charging Environments in the Lunar Wake
A plasma wake a region of low density, high temperature plasma forms on the far side of the Moon when solar wind, magnetosheath, and magnetotail plasma flows past the Moon [Manka, 1973; Ogilvie et al., 1996; Farrell et al., 1998; Halekas et al., 2005]. Ion populations in these flows typically have much smaller thermal velocity than bulk speed and are therefore excluded from the plasma wake while the large thermal electron velocity allows the lighter negatively charged particles to stream ahead of the ions into the wake. Charge separation due to electrons streaming ahead of the ions into the wake from the wake boundary establishes an ambipolar electric field which impedes the motion of electron flow and accelerates ions into the wake [Ogilvie et al., 1996; Farrell et al., 1997]. We have conducted a theoretical study of acceleration (and deceleration) of charged particles in lunar plasma environments, which investigated the mechanisms responsible for allowing solar wind entry into the lunar wake, and for producing energetic particle distributions observed within the lunar wake. To this end, the investigation utilized a macroscale 3D hybrid particle-in-cell numerical model of the interaction of the Moon with external plasma environments to compute electric fields in the lunar environment for a variety of external plasma conditions and interplanetary magnetic field orientations. Ion dynamics were attained from the hybrid code while electron dynamics were determined by considering electron test particle trajectories through the fields established in the hybrid code. Results from the code will be presented to evaluate charging environments within the lunar wake.
Parker, Linda↗
Characterization of Magnetospheric Spacecraft Charging Environments Using the LANL Magnetospheric Plasma Analyzer Data Set
An improved specification of the plasma environment has been developed for use in modeling spacecraft charging. It was developed by statistically analyzing a large part of the LANL Magnetospheric Plasma Analyzer (MPA) data set for ion and electron spectral signature correlation with spacecraft charging, including anisotropies. The objective is to identify a relatively simple characterization of the full particle distributions that yield an accurate predication of the observed charging under a wide variety of conditions.
Hardage, Donna↗
Comprehensive Characterization of Water Group Ion Composition and Distributions in Saturn's Magnetosphere With Cassini Plasma Spectrometer Data
Saturn's magnetosphere is continuously supplied with neutrals from the Enceladus plume and the icy rings, which undergo ionization and charge-exchange to form a complex water-group plasma environment. While the Cassini Plasma Spectrometer (CAPS) instrument has provided extensive compositional information, detailed separation of individual water-group ion species in time-of-flight (TOF) data has not previously been achieved. In this study, we perform forward modeling of CAPS-IMS energy-per-charge (E/Q) and TOF spectra obtained between 2004 and 2012 to resolve O + , OH + , H 2 O + , and H 3 O + and to characterize their plasma properties, including number density, temperature, and thermodynamic κ. Our results demonstrate that O + is the dominant thermal ion species throughout Saturn's magnetosphere, comprising up to ∼70% of the total ion population beyond ∼5 Saturn radii (R S ). In contrast, molecular ions such as OH + , H 2 O + , and H 3 O + dominate closer to Enceladus but rapidly dissociate into atomic ions between ∼5 and 10 R S . This radial region is also characterized by the steepest increase in plasma flow speed, which rises from ∼40% to ∼80% of rigid corotation. Simultaneously, ion velocity distributions approach Maxwell–Boltzmann equilibrium, as indicated by high kappa values. These findings provide new constraints on the ion–neutral chemistry that regulates the balance between molecular and atomic ions in Saturn's magnetosphere. They also emphasize the critical role of the 5–10 R S region as a transition zone for both plasma composition and dynamics. Our results refine previous CAPS-based studies and underscore the need to incorporate seasonal variability and ionospheric coupling into future global models of Saturn's plasma environment.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Upper-Hybrid Waves Driven by Meandering Electrons Around Magnetic Reconnection X Line
Magnetic reconnection is a fundamental process in collisionless space plasma environment, and plasma waves relevant to the kinetic interactions can have a significant impact on the multiscale behavior of reconnection. Here, we present Magnetospheric Multiscale (MMS) observations during an encounter of an X line of symmetric magnetic reconnection in the magnetotail. The X line is characterized by reversals of ion and electron jets and electromagnetic fields, agyrotropic electron velocity distribution functions (VDFs), and an electron-scale current sheet. MMS observe large-amplitude nonlinear upper-hybrid (UH) waves on both sides of the neutral line, and the wave amplitudes have highly localized distribution along the normal direction. Here, the inbound meandering electrons drive the UH waves, releasing the free energy stored from the reconnection electric field along the meandering trajectories. The interaction between the meandering electrons and the UH waves may modify the balance of the reconnection electric field around the X line.
58 GEOSCIENCES↗
Conceptual Design and Performance Considerations for Superconducting Magnets in the Material Plasma Exposure eXperiment
An important step toward the advent of nuclear fusion as a future power source is the development of plasmafacing materials that can function as designed for a long period of time. While ITER and other devices including Wendelstein 7-X and the Joint European Torus will provide insight into divertor and first wall performance, a dedicated device to advance the understanding of material performance in the representative plasma environments is needed. The Material Plasma Exposure eXperiment has been proposed as a linear plasma device to generate and to direct fusion reactor-like plasma energy and particle flux at the target materials with electron temperatures of 1-15 eV and electron densities of 10 20 -10 21 m -3 . Given that the requirements for radio frequency (RF) heating on-axis field are no greater than 2.5 T and the warm bore diameters must be between 60 cm and 1.5 m, the conceptual design was developed for the experiments on a set of superconducting magnets carried out using commercially available NbTi superconductors. This conceptual design evaluated the cryogenic heat loads, mechanical loads, and quench protection to ensure that the current design is compatible with current technologies. In addition, an alternative evaluation of this design relative to ReBCO high-temperature superconducting magnets determined the conditions under which these technologies could be advantageous.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
A Study of Space Station Contamination Effects
A workshop was held with the specific objective of reviewing the state-of-knowledge regarding Space Station contamination, the extent to which the various categories of contamination can be predicted, and the extent to which the predicted levels would interfere with onboard scientific investigations or space station functions. The papers presented at the workshop are compiled and address the following topics: natural environment, plasma electromagnetic environment, optical environment, particulate environment, spacecraft contamination, surface physics processes, laboratory experiments and vented chemicals/contaminants.
Torr, M. R.↗
Dust-gas interactions and the infrared emission from hot astrophysical plasmas
Environments where the presence of dust is primarily inferred from its collisional interactions with the ambient gas are reviewed with emphasis on environments typically encountered behind fast (100 km/s or greater) shocks and in hot (few 10 exp 5 K) plasmas in galactic halos, some elliptical galaxies, or the intergalactic medium of galaxy clusters. The discussion covers interactions between dust grains and a hot gas, grain temperatures and infrared emission, supernova remnants and supershells, and dust and hot gas in, around, and between galaxies. Finally, future prospects in the field are briefly discussed.
Dwek, Eli↗
Concerning the Charging of an Exploration Craft on and near a Small Asteroid
Introduction: An object immersed in an airless plasma environment will experience a natural process of surface charging in order to acheieve current balance, or zero net electric current to the object. It has been shown in recent computer simulations that the small-body plasma environment is very complex [1], considering effects of photoemission, topography, and formation of a plasma wake. For this work we consider an exploration craft (or astronaut) immersed within a plasma environment near an asteroid, which exhibits widely varying solar wind and photoelectric particle fluxes and continuously evolving illumination conditions. Objective: We aim to determine how an explo-ration craft or astronaut suit accumulates charge while located in the "nightside" asteroid wake where the particle fluxes are reduced, and in the dayside near-surface photoelectron sheath, by combining an object charging model [2] with kinetic simulations of a near-asteroid plasma environment [1]. We consider an astronaut floating near the asteroid while not in contact with the surface, as well as an astronaut moving along the surface using their hands/gloves to crawl along. Results: The modeling results suggest that remediation of triboelectric charge via accumulation of plasma currents is an important factor to consider when designing future NEA mission infrastructure, especially if repeated and frequent contact with the surface is planned. In shadowed regions such as the location shown in Fig. 1a, the plasma currents are so low (and the effective charge-remediation timescale so long, e.g. minutes to hours) that repeated contact with the surface tribocharges the glove in an uncontrollable fashion, as shown for two representative electron temperatures in Fig. 2a. The resulting buildup of significant negative charge would eventually initiate some other "current of last resort" [4] such as transport of positively-charged dust, field-emission from the glove, or significant alteration of environmental ion currents within the wake. In contrast, the few-meters-thick dayside photoelectron sheath in which the astronaut of Fig. 1b is immersed in is so rich in electrons (and hence so electrically conductive) that accumulated tribocharge dissipates almost instantaneously (e.g. in less than a ms) as shown in Fig. 2b. As our model astronaut orbits the NEA they would experience plasma currents and associated charge re-mediation times spanning many orders of magnitude, and the fusion between our numerical models provides a detailed understanding of the charging hazards possibly associated with contact-based NEA exploration.
Asteroid↗