Search NASA⌕ Search

SEARCH · Search NASA

Results for “polarization rotation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

A new parameterization of polar motion

The rotational motion of the earth is decomposed into spin, polar motion and local motions. The rotation vector components are associated to phenomena such as precession, nutation, diurnal spin, polar motion and local motions. The above decomposition is accomplished without refering to an earth-fixed CIO pole or BIH zero meridian. The time-like variations of the coordinates of a surface point in a geocentric equatorial reference frame are presented as a function of the rotation vector components. In the rigid earth approximation three scalar parameters are necessary for evaluating point coordinate variations, namely spin rate of the earth, polar motion magnitude and spin rate of the polar motion vector. Two numerical examples are given as an illustration.

Papo, H. B.↗
NASA NTRS1979

Recent results of radio interferometric determinations of a transcontinental baseline, polar motion, and earth rotation

Results are discussed for radio interferometric observations of extragalactic radio sources with antennas at Haystack Observatory in Massachusetts and the Owens Valley Radio Observatory in California (3900-km baseline) during 14 separate experiments distributed between September 1976 and May 1978. Simultaneous analysis of the data from several experiments yields estimates of changes in the x component of pole position and in earth's rotation (UT1). Comparison with the corresponding results obtained by the Bureau International de l'Heure (BIH) reveals systematic differences. In particular, the trends in the radio interferometric determinations of the changes in pole position are found to agree more closely with those from the International Polar Motion Service and from Doppler observations of satellites than with those from the BIH.

Robertson, D. S.↗
NASA NTRS2012

Scientific Verification of Faraday Rotation Modulators: Detection of Diffuse Polarized Galactic Emission

The design and performance of a wide bandwidth linear polarization-modulator based on the Faraday effect is described. Faraday Rotation Modulators (FRMs) are solid-state polarization switches that are capable of modulation up to approx 10 kHz. Six FRMs were utilized during the 2006 observing season in the Background Imaging of Cosmic Extragalactic Polarization (BICEP) experiment; three FRMs were used at each of BICEP fs 100 and 150 GHz frequency bands. The technology was verified through high signal-to-noise detection of Galactic polarization using two of the six FRMs during four observing runs in 2006. The features exhibit strong agreement with BICEP fs measurements of the Galaxy using non-FRM pixels and with the Galactic polarization models. This marks the first detection of high signal-to-noise mm-wave celestial polarization using fast, active optical modulation. The performance of the FRMs during periods when they were not modulated was also analyzed and compared to results from BICEP fs 43 pixels without FRMs.

Moyerman, S.↗
NASA NTRS2021

Polarimetric calibration of the Multi-Angle Imager for Aerosols (MAIA)

NASA’s Multi-Angle Imager for Aerosols (MAIA) mission, under development at the Jet Propulsion Laboratory, is designed to study the adverse health effects of different types of particulate air pollution. Planned for launch in 2023 for a 3-year mission, the MAIA satellite instrument will focus on a selected set of metropolitan target areas, where air quality monitors and health data are available. Aerosol concentration and speciation are inferred from multi-angle measurements of backscattered sunlight in 14 spectral bands from 350-2200 nm, with bands near 442, 645 and 1040 nm measuring the degree (DoLP) and angle of linear polarization (AoLP) in addition to radiance. The pushbroom camera has a ~240-km cross-track field of view with a nadir resolution of ~200 m, and is mounted onto a biaxial gimbal to provide along-track view angles within ±60°, to extend the field of regard to ±48°, and to view the instrument’s onboard calibrator (OBC) and dark target. The OBC consists of a sunlit transmissive diffuser, followed by 12 polarizers at different orientations. MAIA’s polarimetry is implemented using miniature wire grid polarizers on the focal plane array, and dual photoelastic modulators (PEMs) and achromatic quarter-wave plates to rapidly rotate the polarization. The resulting ~26-Hz intensity modulation encodes the linearly polarized and total radiance in each pixel, leaving the DoLP and AoLP insensitive to gain calibration. We report on the polarimetric calibration of the MAIA camera using a vacuum-compatible polarization state generator, consisting of a 1600W Xenon lamp, 12-inch integrating sphere, and rotating high-extinction polarizer. Mueller-matrix-based calibration coefficients for each detector pixel are derived from measurements at multiple polarizer angles, and are used to correct the measurements for instrumental polarization aberrations. Prior to flight, the calibrated MAIA camera is panned across the OBC to characterize its output, using uniform illumination with an irradiance similar to the Sun.

Werne, Thomas↗
NASA NTRS1985

Deformation induced by polar motion

Variations in the geocentric position of the earth's rotation axis (polar motion) cause deformation within the earth. The effects of this deformation on radial and horizontal positions of points on the earth's surface, on baseline lengths between those points, and on surface gravity are estimated. The effects of the oceans and of the earth's anelasticity on this deformation are found to be negligible. Peak-to-peak variations in radial motion are typically 10-20 mm over a year. Horizontal displacements are less than 7-8 mm. Variations in baseline length can be as large as 30-40 mm. Variations of up to 13 microgal in surface gravity are possible. These numbers are all small enough that they can probably not be used to learn about the earth. However, they are large enough to affect noticeably present high-quality geodetic observations.

Wahr, J. M.↗
NASA NTRS2003

COR1 Engineering Test Unit Measurements at the Mauna Loa Solar Observatory, September 2003

The COR1 Engineering Test Unit (ETU), which had been previously tested at the NCAR/HAO and NRL test facilities, was modified into an instrument capable of observing the Sun. It was then taken to the Mauna Loa Solar Observatory to observe the corona. The changes made to observe the Sun were as follows: 1. The plate scale was changed to accommodate the smaller Apogee camera. This change had already been made for the NRL tests. 2. The previous Oriel polarizer was replaced with a commercial Polarcor polarizer from Newport to be more flight-like. However, because of cost and availability considerations, this polarizer was smaller than those which will be used for flight. 3. A structure was placed around the back section of the instrument, to protect it from stray light. 4. A pointing spar borrowed from HAO was used to track the Sun. A few days into the test, it became evident that some artifacts were appearing in the data, and these artifacts were changing as the polarizer was rotated. It was decided to test two other polarizers, the Oriel polarizer which had been used in the previous tests at HAO and NRL, and a Nikon polarizer which was borrowed from a camera belonging to one of the observatory staff members. These three polarizers had much different qualities are shown.

Thompson, William↗
NASA NTRS1997

The polar solar wind: An additional acceleration due to the rotation of the magnetic sun

The influence of the solar rotation of the polar solar wind acceleration was analyzed theoretically. Data from the Solar and Heliospheric Observatory (SOHO) ultraviolet instruments were used to test the theoretical predictions. These predictions are: the double electric layer at the heliocentric distance of 2.6 solar radii, and the system of field-aligned electric currents above 2.6 solar radii. The model provides a 3D analytical discontinuous stationary solution of the magnetohydrodynamic equations in the non-inertial frame of reference.

Pisanko, Y. V.↗
NASA NTRS1986

Polar motion-induced gravity

Variations in the geocentric position of the earth's rotation axis (polar motion) cause deformation within the earth. The effects of this deformation on surface gravity and on radial and horizontal positions of points on the earth's surface are estimated. The effects of the oceans and of the earth's anelasticity on this deformation are found to be negligible. Peak-to-peak variations in surface gravity of 10 microgals or more, and in radial motion of 1-2 cm are possible over six months or so. These numbers are small enough that they can probably not be used to learn about the earth; however, they are large enough to noticeably affect present high-quality geodetic observations.

Wahr, John M.↗
NASA NTRS1989

Gain of circularly polarised arrays composed of linearly polarised elements

The gain of circularly polarized (CP) array antennas realized by proper phasing of sequentially rotated linearly polarized (LP) elements is compared to that of arrays using CP elements and demonstrated by calculations for microstrip patch elements. When element spacing is large and array size is small, the advantages of LP elements are offset by the significant reduction in gain due to high cross polarized lobes in the diagonal planes. For large arrays of closely spaced elements, this gain loss reduces to a negligible amount. However, for spacings above a critical value of about 0.7 wavelengths, unacceptably high gain losses will be incurred.

Hall, P. S.↗
NASA NTRS2012

On-chip polarimetry for high-throughput screening of nanoliter and smaller sample volumes

A polarimetry technique for measuring optical activity that is particularly suited for high throughput screening employs a chip or substrate (22) having one or more microfluidic channels (26) formed therein. A polarized laser beam (14) is directed onto optically active samples that are disposed in the channels. The incident laser beam interacts with the optically active molecules in the sample, which slightly alter the polarization of the laser beam as it passes multiple times through the sample. Interference fringe patterns (28) are generated by the interaction of the laser beam with the sample and the channel walls. A photodetector (34) is positioned to receive the interference fringe patterns and generate an output signal that is input to a computer or other analyzer (38) for analyzing the signal and determining the rotation of plane polarized light by optically active material in the channel from polarization rotation calculations.

Bornhop, Darryl J.↗
NASA NTRS1982

Magnetic field rotation through the magnetopause - ISEE 1 and 2 observations

ISEE 1 and 2 magnetic field data obtained during dayside magnetopause crossings are analyzed using a minimum variance technique in order to determine the characteristics of the rotation of the magnetic field across the magnetopause. Only a small fraction of the magnetopause crossings examined present a sufficiently coherent structure that they can be compared with theoretical predictions and only a few of the hodograms of the magnetic field at the crossings display the ideal rotation expected for a rotational discontinuity structure. It is found that the observed senses of rotation are not consistent with the predictions of the electron whistler polarization theory. Rotations exceeding 180 deg are very seldom observed; they usually occur across multiple crossings, either as 360 deg rotation about the minimum variance direction or, occasionally, in more complicated patterns associated with S-shaped hodograms. These observations are seen as indicating that the sense of the magnetic field rotation through the magnetopause is controlled by the relative orientation of the magnetosheath and the magnetospheric field and that the angular rotation is minimized when the magnetic field changes from one orientation to the other.

Berchem, J.↗
NASA NTRS1984

Instrumentation for Submillimeter Polarimetry

During the last two years three instruments were built and operated for detection of polarization in the submillimeter to millimeter wavelength bands. In principle, simply rotating a polarizing grid in front of the detector would be sufficient to determine the state of linear polarization. In practice severe systematic problems are found with this approach. Everything in the light path has potential for inducing polarization. The telescope, apertures in the lightpath, and the Winston light collectors all introduce systematic errors. (The polarization/depolarization induced by these devices is due to diffraction and the finite conductivity of the metals used). Two of the polarimeters are for use on the KAO; the third is for the IRTF on Mauna Kea. The airplane polarimeters, M1 and M2, were specifically designed to minimize the systematic errors. The ground based polarimeter uses our f/35 photometer with an external polarizing grid as the analyzer. With all three instruments the key to success is the data collector and analysis scheme.

Dragovan, M.↗
NASA NTRS2009

Polarimetric Imaging using Two Photoelastic Modulators

A method of polarimetric imaging, now undergoing development, involves the use of two photoelastic modulators in series, driven at equal amplitude but at different frequencies. The net effect on a beam of light is to cause (1) the direction of its polarization to rotate at the average of two excitation frequencies and (2) the amplitude of its polarization to be modulated at the beat frequency (the difference between the two excitation frequencies). The resulting modulated optical light beam is made to pass through a polarizing filter and is detected at the beat frequency, which can be chosen to equal the frame rate of an electronic camera or the rate of sampling the outputs of photodetectors in an array. The method was conceived to satisfy a need to perform highly accurate polarimetric imaging, without cross-talk between polarization channels, at frame rates of the order of tens of hertz. The use of electro-optical modulators is necessitated by a need to obtain accuracy greater than that attainable by use of static polarizing filters over separate fixed detectors. For imaging, photoelastic modulators are preferable to such other electrio-optical modulators as Kerr cells and Pockels cells in that photoelastic modulators operate at lower voltages, have greater angular acceptances, and are easier to use. Prior to the conception of the present method, polarimetric imaging at frame rates of tens of hertz using photoelastic modulators was not possible because the resonance frequencies of photoelastic modulators usually lie in the range from about 20 to about 100 kHz.

Wang, Yu↗