Search NASA⌕ Search

SEARCH · Search NASA

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

POWGEN: a third-generation high resolution high-throughput powder diffraction instrument at the Spallation Neutron Source

Powgen represents a departure from previous designs for a time-of-flight powder diffractometer at a spallation neutron source and may be considered a third-generation design. The instrument is optimized for both parametric studies of materials under a wide range of conditions (T, P, H, flowing gases, etc) and ab-initio crystal structure determinations of complex solid-state materials with asymmetric unit-cells of the order {approx}1500 {angstrom}{sup 3}. The geometric design of the instrument allows for all detected scattered neutrons to be focused onto a single diffraction profile yielding high count rate while preserving good resolution {Delta}d/d = 0.0015 at a d = 1 {angstrom}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Polycapillary x-ray lenses for single-shot, laser-driven powder diffraction

X-ray diffraction measurements to characterize phase transitions of dynamically compressed, high-Z matter at Mbar pressures require both sufficient photon energy and fluence to create data with high fidelity in a single shot. Large-scale laser systems can be used to generate x-ray sources above 10 keV utilizing line radiation of mid-Z elements. However, the laser-to-x-ray energy conversion efficiency at these energies is low, and thermal x-rays or hot electrons result in unwanted background. We employ polycapillary x-ray lenses in powder x-ray diffraction measurements using solid target x-ray emission from either the Z-Beamlet (ZBL) long-pulse or the Z-Petawatt (ZPW) short-pulse laser systems at Sandia National Laboratories. Polycapillary lenses allow for a 100-fold fluence increase compared to a conventional pinhole aperture while simultaneously reducing the background significantly. This enables diffraction measurements up to 16 keV at the few-photon signal level as well as diffraction experiments with ZPW at full intensity.

47 OTHER INSTRUMENTATION↗

Neutron powder diffraction, Mossbauer Spectroscopy and Optical Spectroscopy to study magnetic and nuclear lattices in Fe-based oxychlorides Ca2FeO3Cl, Sr2FeO3Cl and Sr3Fe2O5Cl2

Data for Neutron Diffraction, Mossbauer Spectoscopy and Optical Spectroscopy are contained on all three samples (Ca2FeO3Cl, Sr2FeO3Cl, and Sr3Fe2O5Cl2). Mossbauer data are in the folder "MossbauerSpectroscopy". This contains details of files and examples to read the data. The Optical Spectroscopy are in the folder "AbsorptionData", this contains one file with explanatory headers. The neutron diffraction data are in the "NeutronDiffractionData" folder. The data was collected on the HB-2A powder diffractometer at HFIR. The autoreduced files are corrected using a vanadium standard and are in arbitrary intensity units. The RawData folder contains the uncorrected data with metadata for motor positions and temperature. All measurements were collected with a constant neuton wavelength of 2.41 Angstrom. An excel spreadsheet "NeutronDiffractionData_IPTS-29118_summary" contains details for each scan. Sr3Fe2O5Cl2 data were collected at only room temperature. Ca2FeO3Cl and Sr2FeO3Cl data were collected at 4K and room temperature. The autoreduced .dat fileformat is three columns corresponding to: Two-theta, Intensity and Intensity_error.

fe-based oxychlorides↗

In situ X-ray powder diffraction studies of the synthesis of graphene oxide and formation of reduced graphene oxide

Graphene oxide (GO) and reduced graphene oxide (rGO) are important materials in a wide range of fields. The modified Hummers methods, for synthesizing GO, and subsequent thermal reduction to rGO, are often employed for production of rGO. However, the mechanism behinds these syntheses methods are still unclear. We present an in situ X-ray diffraction study of the synthesis of GO and thermal reduction of GO. The X-ray diffraction revealed that the Hummers method includes an intercalation state and finally formation of additional crystalline material. The formation of GO is observed during both the intercalation and the crystallization stage. During thermal reduction of GO three stages were observed: GO, a disordered stage, and the rGO stage. The appearance of these stages depends on the heating ramp. The aim of this study is to provide deeper insight into the chemical and physical processes during the syntheses. - Graphical abstract: In situ X-ray diffraction results for of the modified Hummers synthesis and the thermal reduction of graphene oxide, revealing three stages for both syntheses as well as new GO diffraction peaks and unidentified crystalline material for the Hummers synthesis and a disordered stage for the thermal reduction of graphene oxide. Display Omitted - Highlights: • Hummers synthesis consists of three stages: dissolution, intercalation and crystal. • GO is produced early on during the synthesis and display new diffraction peaks. • An unidentified triclinic phase is observed for the Hummers synthesis. • Thermal reduction of GO display three stages: GO, a disordered stage and rGO. • In situ XRD indicate reformation of rGO even for fast heated thermal reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Copper doped TiO2 nanoparticles characterized by X-ray absorption spectroscopy, total scattering, and powder diffraction – a benchmark structure–property study

Metal functionalized nanoparticles potentially have improved properties e.g. in catalytic applications, but their precise structures are often very challenging to determine. Here we report a structural benchmark study based on tetragonal anatase TiO 2 nanoparticles containing 0–2 wt% copper. The particles were synthesized by continuous flow synthesis under supercritical water–isopropanol conditions. Size determination using synchrotron PXRD, TEM, and X-ray total scattering reveals 5–7 nm monodisperse particles. The precise dopant structure and thermal stability of the highly crystalline powders were characterized by X-ray absorption spectroscopy and multi-temperature synchrotron PXRD (300–1000 K). The combined evidence reveals that copper is present as a dopant on the particle surfaces, most likely in an amorphous oxide or hydroxide shell. UV-VIS spectroscopy shows that copper presence at concentrations higher than 0.3 wt% lowers the band gap energy. The particles are unaffected by heating to 600 K, while growth and partial transformation to rutile TiO 2 occur at higher temperatures. Anisotropic unit cell behavior of anatase is observed as a consequence of the particle growth (a decreases and c increases).

Lock, Nina↗

Synchrotron X-ray powder diffraction and convergent beam electron diffraction studies on the cubic phase of MgV{sub 2}O{sub 4} spinel

The A V{sub 2}O{sub 4} (A=Mg{sup 2+}, Zn{sup 2+}, Cd{sup 2+}) spinels are three-dimensional spin-1 frustrated systems with orbital degree of freedom, which have been known to possess intriguing orbital states causing releases of spin frustration at low temperatures. We have performed synchrotron X-ray and convergent beam electron diffraction measurements for one of these vanadates, MgV{sub 2}O{sub 4} in order to clarify its crystal structure in the high temperature cubic phase, which is regarded as an important starting point for understanding the details of the low temperature phase. We have successfully observed that the [001] zone axis convergent beam electron diffraction pattern exhibits 4mm symmetry, suggesting the space group of Fd3{sup ¯}m in the cubic MgV{sub 2}O{sub 4}. It has also been demonstrated that the crystal structure of the cubic MgV{sub 2}O{sub 4} contains VO{sub 6} octahedra elongated along the threefold rotation axis. Based on our results, we discuss the orbital states of MgV{sub 2}O{sub 4} as well as the other spinel vanadates. - Graphical abstract: Precise geometry of the VO{sub 6} octahedra in the cubic phase of MgV{sub 2}O{sub 4} spinel determined with the synchrotron powder XRD data. - Highlights: • We examined the crystal structure of the cubic phase of MgV{sub 2}O{sub 4} spinel. • We prepared the single crystal and powdered sample of MgV{sub 2}O{sub 4} with high quality. • The result of the CBED measurement agrees with the space group of Fd3{sup ¯}m in the phase. • The cubic phase has VO{sub 6} octahedra elongated along the threefold rotation axis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetization distribution in Cu 0.6 Mn 2.4 Ge 2 ferromagnet from polarized and non-polarized neutron powder diffraction aided by density-functional theory calculations

The crystal structure and magnetic properties of Cu 0.6 Mn 2.4 Ge 2 have been re-investigated by a combination of extensive magnetic measurements and neutron scattering experiments, aided by electronic structure calculations. The material is found to be a soft ferromagnet with the ordering temperature T C = 316 K. The magnetocaloric effect evaluated from field-dependent magnetization isotherms is equal to 1.2 J/(kg·K) and 2.5 J/(kg·K) under the maximum applied magnetic field of 2 T and 5 T, respectively. The compound crystallizes in the hexagonal space group P6 3 /mmc. A complex structural disorder necessitated testing of several disorder models against the results of non-polarized and polarized neutron scattering experiments and magnetization measurements. Simulations at the density-functional theory level were also performed to identify the most robust solution that properly described the data observed. The final magnetic structure model reveals non-equal magnetic moments on the Mn1 and Mn2 atoms (2.29(9) µ B and 2.7(1) µ B , respectively) and the presence of vacancies and minor Cu substitution defects in both Mn sites. The work demonstrates how the non-polarized and polarized neutron scattering methods can be combined with electronic structure calculations to establish the microscopic structure of magnetic materials with complex crystallographic disorder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neutron powder diffraction and difference maximum entropy method analysis of protium- and deuterium-dissolved BaSn{sub 0.5}In{sub 0.5}O{sub 2.75+{alpha}}

We propose a new method, a difference maximum entropy method (MEM) analysis of the neutron diffraction data, for revealing the detailed structure around hydrogen atoms in proton-conducting oxides. This MEM analysis uses the differences between the structure factors of protium- and deuterium-dissolved crystals. Simulations demonstrate that it not only provides the distribution of hydrogen atoms alone, but also improves the spatial resolution of MEM mapping around hydrogen atoms. Applied to actual diffraction data of protium- and deuterium-dissolved BaSn{sub 0.5}In{sub 0.5}O{sub 2.75+{alpha}} at 9 K, difference MEM analysis reveals that O-D bonds mostly tilt towards the second nearest oxygen atoms, and that the distributions of deuterium and oxygen atoms are probably insignificant in interstitial regions. - Graphical abstract: A novel method, difference maximum entropy method (MEM) analysis of the neutron diffraction data, is proposed for revealing the detailed structure around hydrogen atoms in proton-conducting oxides. This MEM analysis uses the differences between the structure factors of protium- and deuterium-dissolved crystals and improves the spatial resolution of the MEM mapping around the hydrogen atoms.

36 MATERIALS SCIENCE↗