Employing a Bezier curve model for simulating microstructure generation during the AM process.
Abstract not provided.
Trageser, Jeremy↗
SEARCH · Search NASA
Results for “process simulation modeling”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A Three-Tier Incremental Approach for Development of Smart Corridor Digital Twins
Development of an arterial smart corridor digital twin requires the integration of real time data streams, data storage, and simulation model execution. This process may be complex, time consuming, and susceptible to errors. To aid in smart corridor digital twin development this paper seeks to provide a framework, best practices, and development guidance. As such, a three-tier incremental approach to smart corridor digital twin development is presented. The paper highlights practical issues in digital twin construction along with key data challenges based on experiences from the development of digital twins for two large Smart Corridor deployments, one in Chattanooga, Tennessee, and the other in Atlanta, Georgia. The presented three-tier incremental approach includes: 1) development of a prepopulated offline simulation, 2) development of a pseudo digital twin that is driven by archived data, and 3) integration of real time data streams to create the online digital twin model. The three-tiered approach facilitates conducting multiple trials and scenarios with increasing complexity, allowing for incremental error processing and updating of the digital twin.
Saroj, Abhilasha↗
Biogenic carbon capture at pulp mills via sodium spiking and oxy-fuel calcination
Over 13 million metric tons of biogenic carbon dioxide (CO 2 ) are mineralized yearly in United States (US) pulp mill recovery boilers as molten sodium carbonate. The mineralized CO 2 is released downstream in the rotary lime kiln where it can be captured at a relatively low cost for permanent sequestration. The use of biocarbon and bioenergy at pulp mills enables the possibility for atmospheric carbon removal when biogenic CO2 is captured and sequestered. We demonstrate the feasibility of capturing biogenic CO 2 via sodium spiking coupled with oxy-fuel calcination in the rotary lime kiln at existing kraft pulp mills. Sodium (Na) spiking elevates the Na ion loading in the kraft chemical looping process by replacing chlorine-based bleaching with a highly alkaline bleaching sequence. Chemical pulping processes are modeled and simulated to understand the technical limits of implementing sodium spiking in existing pulp mills. Each 1 % of sodium added to the bleaching operations increases the rate of CO 2 mineralization by 4 %, and the maximum increase in sodium content in the kraft process is 9 %. Without sodium spiking, estimated CO 2 capture costs are $131 and $107/mt CO 2 for air and oxy-fuel combustion, respectively. With the implementation of sodium spiking, the cost of CO 2 captured decreases by 27 % and 31 %, showing costs of $96 and $74/mt CO 2 for air and oxy-fuel combustion, respectively. Oxy-fuel combustion reduces the costs of CO 2 capture compared to air combustion, but merged deployment with sodium spiking seems to be the most cost-effective pathway to integrate carbon capture.
60 APPLIED LIFE SCIENCES↗
Anthropogenic extremely low volatility organics (ELVOCs) Govern the Growth of Molecular Clusters over the Southern Great Plains during the Springtime
New particle formation (NPF) and growth govern cloud condensation nuclei (CCN) concentrations in many regions. The mechanisms governing the nucleation of molecular clusters vary substantially in different regions of the atmosphere. Additionally, the growth of these clusters from ~2 to 20 nm sizes is often governed by the availability of extremely low volatility organic vapours (ELVOCs). While the pathways to ELVOC formation from the oxidation of biogenic monoterpenes with ozone is better understood, the chemical and mechanistic pathways for ELVOC formation from oxidation of anthropogenic organics are not well understood. We integrate measurements and three-dimensional regional model simulations with the Weather Research and Forecasting Model coupled to chemistry (WRF-Chem) to understand the processes governing new particle formation and growth and secondary organic aerosol (SOA) formation during the Holistic Interactions of Shallow Clouds, Aerosols and Land Ecosystems (HI-SCALE) field campaign at the Southern Great Plains (SGP) observatory in Oklahoma, and contrast it with a site within the Bankhead National Forest (BNF), Alabama in Southeast USA, where 5-year long measurements will begin in 2024. Simulations show that nucleation rates are at least an order of magnitude higher at SGP compared to BNF during the springtime days (April 28 and May 14, 2016), largely due to lower H2SO4 concentrations at BNF, which are needed for nucleation. In addition, the larger CS at BNF (compared to SGP) increase the loss of molecular clusters by coagulation to pre-existing particles. Among the 8 different nucleation mechanisms in WRF-Chem, we find that the amine+H2SO4 nucleation mechanism dominates at the SGP site, while the pure organic ion induced nucleation mechanism dominates over BNF. Through various WRF-Chem sensitivity simulations, we find that anthropogenic ELVOCs are critical for explaining the growth of newly formed particles and the resulting number size distribution observed near the surface at the SGP site during the daytime. In addition, we show that treating organic particles as semisolid, with strong diffusion-limited uptake of organic vapours, brings model predictions into closer agreement with the observed evolution of particle size distribution. Simulations also predict that anthropogenic SOA, formed by the oxidation of aromatic volatile organic compounds (VOCs), is the dominant organic aerosol component at SGP, while biogenic SOA dominates particle composition at the BNF site in Southeast USA on these days.
Shrivastava, ManishKumar B.↗
Quantum signal processing for simulating cold plasma waves
Numerical modeling of radio-frequency waves in plasma with sufficiently high spatial and temporal resolution remains challenging even with modern computers. However, such simulations can be sped up using quantum computers in the future. In this work, we propose how to do such modeling for cold plasma waves, in particular, for an X wave propagating in an inhomogeneous one-dimensional plasma. The wave system is represented in the form of a vector Schrödinger equation with a Hermitian Hamiltonian. Block encoding is used to represent the Hamiltonian through unitary operations that can be implemented on a quantum computer. To perform the modeling, we apply the so-called quantum signal processing algorithm and construct the corresponding circuit. Quantum simulations with this circuit are emulated on a classical computer, and the results show agreement with traditional classical calculations. We also discuss how our quantum circuit scales with the resolution.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Emergent facilitation and glassy dynamics in supercooled liquids
In supercooled liquids, dynamical facilitation refers to a phenomenon where microscopic motion begets further motion nearby, resulting in spatially heterogeneous dynamics. This is central to the glassy relaxation dynamics of such liquids, which show super-Arrhenius growth of relaxation timescales with decreasing temperature. Despite the importance of dynamical facilitation, there is no theoretical understanding of how facilitation emerges and impacts relaxation dynamics. Here, we present a theory that explains the microscopic origins of dynamical facilitation. We show that dynamics proceeds by localized bond-exchange events, also known as excitations, resulting in the accumulation of elastic stresses with which new excitations can interact. At low temperatures, these elastic interactions dominate and facilitate the creation of new excitations near prior excitations. Using the theory of linear elasticity and Markov processes, we simulate a model, which reproduces multiple aspects of glassy dynamics observed in experiments and molecular simulations, including the stretched exponential decay of relaxation functions, the super-Arrhenius behavior of relaxation timescales as well as their two-dimensional finite-size effects. The model also predicts the subdiffusive behavior of the mean squared displacement (MSD) on short, intermediate timescales. Furthermore, we derive the phonon contributions to diffusion and relaxation, which when combined with the excitation contributions produce the two-step relaxation processes, and the ballistic–subdiffusive–diffusive crossover MSD behaviors commonly found in supercooled liquids.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Process intensification approach to enhancing heat and mass transfer: Radio frequency (RF) assisted drying of paper and board
Conventional multi-cylinder drying of paper and board typically relies on both conductive drying from steam-heated cylinders and convective drying, where heated air flows over the paper web surface. Conduction primarily contributes to heat transfer, while convection is the main driver of mass transfer. However, conventional drying systems are heavily dependent on steam, usually powered by fossil fuels, and are often energy-inefficient with high levels of waste. Additionally, these surface-driven processes result in a lower percentage of energy absorption compared to the energy supplied, leading to significant energy losses. To improve this long-standing process, an experimental system was developed to investigate a process intensification approach involving the integration of Radio Frequency (RF) heating, a volumetric electromagnetic technology, alongside traditional conduction and convection drying methods. This study also emphasizes the use of sensors to continuously monitor key parameters such as moisture content, supply system temperatures, sample temperatures, air flows, and drying rates in real-time. The effect of RF as an auxiliary energy source in localized environments at varying moisture levels was explored to optimize industrial drying systems, quantify potential improvements, and provide insights for future studies. Experimental results from trials combining RF with convection and with the base case alternating conduction-convection drying processes are presented. It is shown that RF is a viable process intensification approach for paper drying improving the drying rate and energy intensity at higher moisture contents. These findings offer valuable insights for process intensification and contribute to the process development, modeling, and simulation of advanced paper drying techniques.
42 ENGINEERING↗
Contaminant Transport Modeling for Technology Evaluation and Long-Term Monitoring in the Tims Branch Testbed, SC - 20343
Studies conducted at U.S. DOE sites have shown the presence of heavy metals, radionuclides, and volatile organic compounds in surface water, groundwater, and soil as a result of nuclear activity in the Cold War era. Since the 1990's, innovative cleanup methods have been implemented in the Tims Branch watershed at Savannah River Site (SRS) to limit the contaminant flux to the stream that have reduced the contaminant concentrations to acceptable regulatory levels in the dissolved phase. A tin-based treatment which effectively eliminated all local anthropogenic mercury inputs to this ecosystem resulted in a known step function addition of inert tin oxide particles which now serve as a potential tracer for sedimentation and particle transport processes in the stream. The long-term effectiveness of this and other remediation techniques and the potential for remobilization of adsorbed contaminant in sediment during extreme hydrologic conditions however remains unclear. It is therefore important to understand not only the fate and transport of dissolved contaminants, but also the movement of sediment and the relevant interactions with dissolved contaminant. To narrow this knowledge gap, a study is being conducted using the Tims Branch watershed as a stream-scale ecosystem test-bed to identify the primary transport processes of major contaminants of concern (such as mercury, nickel and uranium) with an emphasis on interactions with sediment transport. This involves the development of a fully distributed hydrologic watershed model of the Tims Branch watershed to predict streamflow under extreme weather conditions, as well as the development of a comprehensive contaminant transport model that can properly account for coupled contaminant and sediment transport. Review of relevant research reports and peer-reviewed journals revealed that aside from advection-dispersion transport of dissolved contaminants, adsorption and desorption with suspended solids and bed sediment also play an important role in the transport of those contaminants of concern. To develop the fully distributed hydrologic watershed model, the MIKE SHE 2-dimensional (2D) land surface/3D groundwater model that simulates surface/subsurface hydrologic processes (such as overland flow, evapotranspiration, and infiltration) was coupled with a 1D streamflow model that accounts for stream water hydraulics (such as hydraulic structures, cross-sections, and network). To model contaminant transport, the MIKE 11 streamflow component was coupled with the MIKE 11 AD module that simulates solute transport through advection and dispersion, and MIKE ECO Lab module that accounts for both sediment transport and interactions with dissolved contaminant. At this stage, the development and optimization of the fully distributed hydrologic model has been completed, achieving satisfactory statistical results between observed and predicted discharge as indicated by a root mean square error (RMSE) of 0.039 cms and a Nash-Sutcliffe efficiency coefficient (NSE) of 0.764. The ongoing development of the contaminant transport model has also yielded realistic results from preliminary tests. Results from this study are a key to evaluating the effectiveness of tin (II)-based mercury treatment of wetlands at the SRS site, and are also relevant to evaluating the potential of using this type of novel remediation technology in other mercury-contaminated stream systems. Knowledge acquired from this research will also support interpretation of historical data on the trends of contaminant concentration distribution in Tims Branch, particularly considering the effect of extreme hydrological events on the stream flow and pollutant transport. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
A Review of Lattice-Boltzmann Models Coupled with Geochemical Modeling Applied for Simulation of Advanced Waterflooding and Enhanced Oil Recovery Processes
To maintain economic profit and improve the oil production efficiency after the primary and secondary production phase, advanced waterflooding techniques such as low salinity waterflooding in carbonate reservoirs have been investigated in numerical simulations, laboratory experiments, and field pilot tests. Multiple underlying mechanisms have been proposed based on these studies, and they are still under debate. Various numerical modeling approaches are introduced, but there exists a lack of a pore-scale comprehensive modeling scheme to fully understand the processes. Lattice-Boltzmann method (LBM) is a type of numerical fluid flow modeling technique that shows capabilities and flexibilities in modeling pore-scale fluid flow to integrate physical–chemical processes within complex structures. The intrinsic feature of LBM makes it a promising framework for simulating advanced waterflooding due to its flexibility, accuracy, and parallel efficiency. LBM works either by itself for solving reactive transport problems or by coupling with a third-party reaction solver. This review mainly introduces the LBM fluid flow and reactive transport capabilities and the concept and modeling approaches to simulate advanced waterflooding techniques. Meanwhile, an evaluation of the coupled LBM models for enhanced oil recovery (EOR) simulations is discussed with future research challenges and directions concluded.
02 PETROLEUM↗
Virtual Volumetric Additive Manufacturing (VirtualVAM)
Abstract Tomographic volumetric additive manufacturing (VAM) produces arbitrary 3D geometries by exposure of a rotating volume of photopolymer resin to tomographically‐patterned illumination. This enables high speed, layer‐less printing of parts from a wide range of photopolymers not amenable to layer‐by‐layer processes. Since the entire geometry is produced at once over the course of a few seconds to minutes, molecular diffusion length scales become significant to the printing process. Understanding these molecular reaction and diffusion processes is imperative for advancing VAM to a usable technology. These processes are experimentally very difficult to monitor and measure. Herein, VirtualVAM ‐ a simulation framework for modeling the tomographic VAM process, is developed and experimentally validated. VirtualVAM simulates reaction, diffusion, and heat generation processes over the course of a print with single‐voxel resolution. From a few experimentally‐determined input parameters and a set of images for projection, VirtualVAM is able to generate a large spatio‐temporal data set for any given tomographic VAM print. Using VirtualVAM, a number of experimentally‐unattainable aspects of the VAM process are investigated such as single‐voxel conversion profiles, effect of molecular oxygen, and stopping time determination. VirtualVAM also enables the optimization of exposure patterns to further improve contrast between in‐part and out‐of‐part delivered dose.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
The FastEddy® Resident-GPU Accelerated Large-Eddy Simulation Framework: Moist Dynamics Extension, Validation and Sensitivities of Modeling Non-Precipitating Shallow Cumulus Clouds
Herein we describe the moist dynamics formulation implemented within the graphics processing unit-resident large-eddy simulation FastEddy® model, which includes a simple saturation adjustment scheme for condensation and evaporation processes. Two LES model intercomparison exercises for non-precipitating shallow cumulus clouds are simulated in order to validate this model extension, including a static forcing and a time-dependent forcing case. Overall, we find our dynamical, thermodynamical and microphysical quantities, along with turbulence variability and fluxes, to be commensurate with the corresponding model intercomparison results. In addition, sensitivities to specific model settings are investigated. Among these settings, it is shown that boundary layer and cloud layer structure and characteristics are sensitive to use of higher-order advection schemes impacting the vertical distribution of cloud content and associated turbulence statistics. Increasing the timescale of the saturation scheme leads to enhanced liquid water presence and decreases vertical velocity variance within the cloud deck. In some cases, these sensitivities agree with the model-to-model variability reported in the intercomparison exercises, highlighting the important role of specific model implementation choices in the context of shallow cumulus convection simulations. These analyses and findings also provide the basis for future extensions and applications of FastEddy® for modeling moist convection and precipitation scenarios.
54 ENVIRONMENTAL SCIENCES↗
A simple and practical process modeling methodology for pressure swing adsorption
Although many dynamic models exist for the design and simulation of pressure swing adsorption (PSA) processes, these models involve the solution of a complex system of coupled partial differential equations. Process engineers need a simple, practical, and yet robust short-cut model that helps decide whether to implement a PSA system in a process flowsheet. This work presents a “virtual” moving bed modeling methodology that considers only mass and energy balances and adsorption isotherms to describe the cyclic steady state behavior of PSA systems. Similar to tray efficiencies in distillation calculations, adsorption efficiencies are further introduced to account for system “non-ideality.” Finally, a lab-scale air separation system is used to illustrate the application of this modeling methodology.
42 ENGINEERING↗
Adaptive time scaling for accelerating explicit finite element analysis
A method for accelerating an explicit finite element analysis (FEA) simulation of a modeled system or process includes performing an initial iteration of the FEA simulation according to a baseline time interval via an FEA computing network, and calculating a criteria ratio of a predetermined set of scaling criteria for the modeled system or process. The method includes determining a time-scaling factor using the criteria ratio via the FEA computing network as a function of the criteria ratio, and then applying the time-scaling factor to the baseline time interval to generate a scaled time interval. The scaled time interval accelerates simulation time of the FEA simulation. The method includes performing a subsequent iteration of the explicit FEA simulation at the scaled time interval using the FEA computing network. The process continues for subsequent iterations, with the time-scaling factor adapting with each iteration.
Chen, Jian↗
A web-based decision support system for collaborative mitigation of multiple water-related hazards using serious gaming
The paper presents a web-based application developed as a medium for executing a serious game to enhance multi-jurisdictional collaborative planning and decision making for mitigation of multiple hazards related to water (i.e., floods, soil erosions, water quality). The gaming application is integrated into the Iowa Watershed Decision Support System (IoWaDSS) designed to serve as a comprehensive multi-sectoral data repository along with the simulation results of process modeling to educate and inform communities on the status of their watersheds during extreme conditions. The interactive serious gaming application was devised to encourage public engagement, facilitate communication and positive relationship between watershed communities, and make the decision process more attractive and transparent for the stakeholders. The web environment offers easily-accessible, user-friendly interfaces that match the skills and knowledge level of a non-technical user. Developed with adaptive design and flexible architecture, the gaming application is generalizable and extendable to support hazard mitigation in other watersheds.
54 ENVIRONMENTAL SCIENCES↗
High Elevation Radiation Array (HERA) detectors for airborne thunderstorm investigations
A high-energy atmospheric physics phenomenon, referred to as a terrestrial gamma ray flash (TGF), is associated with lightning and produces large bursts of energetic photon radiation. TGFs will be investigated using a suite of gamma-ray instruments designed and constructed to fly on ten United States Air Force (USAF) WC-130J Hurricane Hunter aircraft as part of an aircrew ionization study led by the Air Force Institute of Technology (AFIT) and the United States Air Force School of Aerospace Medicine (USAFSAM), in cooperation with the 53rd Weather Reconnaissance Squadron (WRS). Each instrument consists of one NaI and one plastic detector, a GPS timing device, and an instrument computer that performs data acquisition. High Elevation Radiation Array (HERA) detectors will be employed to maximize the chances of observing TGFs near their source and to gain a better understanding of their origin, mechanism, ubiquity, and to assess potential hazards posed to military and commercial aircrew and passengers. The HERA program, deployed on 10 separate Air Force aircraft over a multi-year campaign, will result in thousands of observational flight hours and be the largest concerted effort to date to observe TGFs in situ through aircraft observations. In this paper, we give an overview of the scientific goals of this campaign and how the HERA instruments have been designed to meet those goals. Here, we include a detailed description of the HERA instrument, along with mass model and signal processing simulations.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Enabling scientific machine learning in MOOSE using Libtorch
A neural-network-based machine learning interface has been developed for the Multiphysics Object-Oriented Simulation Environment (MOOSE). The interface relies on Libtorch, the C++ front-end of PyTorch, and enables an online interaction between modern machine learning algorithms and all the existing simulation, modeling, and analysis processes available in MOOSE. New capabilities in MOOSE include the native generation and training of artificial neural networks together with options to load pretrained neural networks in TorchScript format. Furthermore, the MOOSE stochastic tools module (MOOSE-STM) has been enhanced with neural network-based surrogate and reduced-order model generation options for efficient stochastic analyses. Lastly, a reinforcement learning capability has been added to MOOSE-STM for the interactive control and optimization of complex multiphysics problems.
97 MATHEMATICS AND COMPUTING↗
Quantum Molecular Charge-Transfer Model for Multistep Auger–Meitner Decay Cascade Dynamics
The fragmentation of molecular cations following inner-shell decay processes in molecules containing heavy elements underpins the X-ray damage effects observed in X-ray scattering measurements of biological and chemical materials, as well as in medical applications involving Auger electron-emitting radionuclides. Traditionally, these processes are modeled using simulations that describe the electronic structure at an atomic level, thereby omitting molecular bonding effects. This work addresses the gap by introducing a novel approach that couples Auger–Meitner decay to nuclear dynamics across multiple decay steps, by developing a decay spawning dynamics algorithm and applying it to potential energy surfaces characterized with ab initio molecular dynamics simulations. We showcase the approach on a model decay cascade following K-shell ionization of IBr and subsequent Kβ fluorescence decay. We examine two competing channels that undergo two decay steps, resulting in ion pairs with a total 3+ charge state. This approach provides a continuous description of the electron transfer dynamics occurring during the multistep decay cascade and molecular fragmentation, revealing the combined inner-shell decay and charge transfer time scale to be approximately 75 fs. In conclusion, our computed kinetic energies of ion fragments show good agreement with experimental data.
Ab initio molecular dynamics↗
Challenges and Capabilities in Estimating Snow Mass Intercepted in Conifer Canopies With Tree Sway Monitoring
Snowpack accumulation in forested watersheds depends on the amount of snow intercepted in the canopy and its partitioning into sublimation, unloading, and melt. A lack of canopy snow measurements limits our ability to evaluate models that simulate canopy processes and predict snowpack. We tested whether monitoring changes in wind-induced tree sway is a viable technique for detecting snow interception and quantifying canopy snow water equivalent (SWE). Over a 6 year period in Colorado, we monitored hourly sway of two conifers, each instrumented with an accelerometer sampling at 12 Hz. We developed an approach to distinguish changes in sway frequency due to thermal effects on tree rigidity versus intercepted snow mass. Over 60% of days with canopy snow had a sway signal that could not be distinguished from thermal effects. However, larger changes in tree sway could not generally be attributed to thermal effects, and canopy snow was present 93%–95% of the time, as confirmed with classified PhenoCam imagery. Using sway tests, we converted changes in sway to canopy SWE, which were correlated with total snowstorm amounts from a nearby SNOTEL site (Spearman r = 0.72 to 0.80, p < 0.001). Greater canopy SWE was associated with storm temperatures between -7°C and 0°C and wind speeds less than 4 m s -1 . Lower canopy SWE prevailed in storms with lower temperatures and higher wind speeds. Monitoring tree sway is a viable approach for quantifying canopy SWE, but challenges remain in converting changes in sway to mass and distinguishing thermal and snow mass effects on tree sway.
54 ENVIRONMENTAL SCIENCES↗