SEARCH · Search NASA
Results for “proton exchange membrane”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Status and challenges for the application of platinum group metal-free catalysts in proton-exchange membrane fuel cells
Platinum group metal-free (PGM-free) electrocatalysts are an important class of materials for the sustainable energy economy and significant effort has been made towards developing PGM-free catalysts to replace their costly Pt counterparts in fuel cell electric vehicles. The progress made in activity over the last decade is reviewed, along with synthesis strategies for more controlled active site formation and performance gains achieved through electrode engineering. The increased focus on durability, the growing understanding of degradation mechanisms, and the need for standard performance and accelerated stress test protocols are discussed.
Solid-State Synthesis of Highly Dispersed Nitrogen-Coordinated Single Iron Atom Electrocatalysts for Proton Exchange Membrane Fuel Cells
Fe–N–C with atomically dispersed Fe single atoms is the most promising candidate to replace platinum for the oxygen reduction reaction (ORR) in fuel cells. However, the conventional synthesis procedures require quantities solvents and metal precursors, sluggish adsorption process, and tedious washing, resulting in limited metal doping and uneconomical for large-scale production. Here, for the first time, Fe 2 O 3 is adopted as the Fe precursor to derive abundant single Fe atoms dispersed on carbon surfaces. The Fe–N–C catalyst synthesized by this simple method shows an excellent ORR activity with half-wave potentials of 0.82 and 0.90 V in acidic and alkaline solutions, respectively. A single fuel cell with an optimized Fe–N–C cathode shows a high peak power density of 0.84 W cm –2 . The solid-state transformation synthesis method developed in this study may shed light on mass production of single-atom-based catalysts.
A Review on Bioinspired Proton Exchange Membrane Fuel Cell: Design and Materials
With the climate crisis gathering recognition, there has been significant interest in clean energy. As a reliable and clean energy solution, markets transitioning toward sustainable energy have identified polymer electrolyte membrane fuel cells (PEMFCs) as a critical technology. The increasing interest in PEMFCs is primarily due to their high energy density, high efficiency and zero greenhouse gas emission. However, additional development is required to overcome the current barriers associated with fuel cell component design, high manufacturing cost, and insufficient stability. Bioinspired designs have the potential to provide new and valuable insights using novel techniques for extracting design inspirations from biological structures. Applying these design concepts to develop materials and structures for various fuel cell components can be transformative. The well–adapted structures and functional features of biological systems have been proven to greatly enhance the performance of current designs through novel and optimized pathways. Bioinspired designs have indeed lived up to performance expectations and even exceed them. Herein, the potential and value of using these bioinspired designs are discussed. Recent studies and advancements based on nature–inspired structures for components of PEMFCs and how these design considerations substantiate their claim as an attractive alternative to conventional designs are discussed.
Novel Hydrocarbon Ionomers for Durable Proton Exchange Membranes
Explore the source record for details and available documents.
How Selective Transport Layer Improves Efficiency and Durability of Proton Exchange Membrane Fuel Cells
In any electrochemical device, the separator or membrane allows specific ions to transport but blocks electrons and other chemical species, enabling the electrochemical energy to be harvested. However, small amounts of undesired species are known to permeate through the membrane, reducing overall system efficiency and lifetime. An emerging concept called the “Selective Transport Layer” preferentially allows only protons to pass through but reduces the permeance of other species by a meaningful degree. Here, in this study, we demonstrate that a 60 nm thick graphene oxide composite layer can be very effective in reducing gas and ion permeation, even for a gas as small as H 2 , while not noticeably increasing proton transport resistance. In electrode and membrane accelerated stability tests, we show that both electrode and membrane durability are improved by a factor of two. Microscopy and mathematic simulations confirm that the graphene oxide composite is effective in blocking transport of dissolved Pt 2+ . The improved durability and reduced H 2 fuel crossover are expected to substantially reduce initial and operating costs of the fuel cell system. How this technology may affect other membrane-based electrochemical devices is also discussed.
Baselining Activity and Stability of ORR Catalysts and Electrodes for Proton Exchange Membrane Fuel Cells for Heavy-Duty Applications
Activity and stability of electrodes with Pt and PtCo alloy catalysts supported on high surface area carbon, hereafter to as a-Pt/C and d-PtCo/C, were evaluated for heavy-duty applications. Both catalysts had nearly identical Pt loading (50-wt% Pt on carbon and 0.25 mg Pt cm −2 ) and had undergone thermal treatment to stabilize them by growing the average particle size to 4–5 nm. Both were subjected to 90,000 (90 k) standard accelerated stress tests (AST) cycles consisting of 0.6–0.95 V square wave potentials, 3-s hold at upper and lower potential limits in H 2 /N 2 at 1.5 atm, 80 °C and 100% RH. Test protocols were developed to monitor the performance losses and characterize them in terms of activity for the oxygen reduction reaction (ORR), oxygen transport in the electrode and proton transport in the membrane and cathode catalyst layer. Despite the nearly double initial ORR activity, the PtCo/C electrode degraded faster due to the leaching of Co from the catalyst that had started even before the imposition of the AST potential cycles. Commensurate with Co leaching, Co poisoning of ionomer is responsible for the inferior performance of d-PtCo/C electrode at high current densities both before and after AST.
Direct Integration of Strained-Pt Catalysts into Proton-Exchange-Membrane Fuel Cells with Atomic Layer Deposition
The design and fabrication of lattice-strained platinum catalysts achieved by removing a soluble core from a platinum shell synthesized via atomic layer deposition, is reported. The remarkable catalytic performance for the oxygen reduction reaction (ORR), measured in both half-cell and full-cell configurations, is attributed to the observed lattice strain. By further optimizing the nanoparticle geometry and ionomer/carbon interactions, mass activity close to 0.8 A mg Pt -1 @0.9 V iR-free is achievable in the membrane electrode assembly. Nevertheless, active catalysts with high ORR activity do not necessarily lead to high performance in the high-current-density (HCD) region. More attention shall be directed toward HCD performance for enabling high-power-density hydrogen fuel cells.
Liquid cooling techniques in proton exchange membrane fuel cell stacks: A detailed survey
Not Available
Enabling low-IrO2 proton exchange membrane water electrolysis via microporous layer-supported catalyst-coated membranes
Not Available
Experimental and computational study of the microporous layer and hydrophobic treatment in the gas diffusion layer of a proton exchange membrane fuel cell
Enabling fuel cell operation at high current density is critical for developing competitive alternative power system to replace internal combustion engine. However, liquid water management continues to be a challenge for high humidity or high current density operation. Water condensation in the porous media hinders efficient oxygen transport to the catalyst layer, which in turns, reduces fuel cell performance. To improve water management capability, the gas diffusion layer is often impregnated with Polytetrafluoroethylene (PTFE) and coated with a thin microporous layer, which have shown to improve fuel cell performance, especially under wet conditions. However, the fundamental mechanism that drives the performance enhancement is still not well understood. In this work, the effects of PTFE impregnation and MPL were studied using both experimental and computational techniques. Both limiting current and polarization tests under dry and wet operating condition are conducted to study the oxygen transport resistance and fuel cell performance. In addition, a 2-D, two-phase, multi-physics PEMFC model is developed to simulate performance and gain a fundamental understanding of local water saturation and oxygen concentration. The combined results show that 5 wt% PTFE impregnation with MPL significantly enhances liquid water management, which enables higher current density operation of a fuel cell.
Highly durable platinum group metal-free catalyst fiber cathode MEAs for proton exchange membrane fuel cells
For this work, Fe-based platinum group metal (PGM)-free catalysts were incorporated into electrospun fiber mat or powder cathode membrane-electrode-assemblies (MEAs) with a Nafion 211 membrane and a Pt/C powder anode. Fabrication and characterization tests were performed on MEAs with: (1) a conventional powder cathode with a neat Nafion binder, (2) a fiber mat cathode with a Nafion/polyethylene oxide (PEO) binder, where PEO was extracted before MEA testing, (3) a powder cathode with a blended binder of Nafion and polyvinylidene fluoride (PVDF), and (4) a series of fiber mat cathodes with different Nafion/PVDF binder weight ratios. Cathode degradation occurred, with a loss in power output, in MEAs with a neat Nafion powder cathode or with a Nafion fiber cathode. In contrast, little or no power loss was observed for powder or fiber cathodes when the binder was a blend of Nafion and PVDF. The presence of hydrophobic PVDF drove water and electrogenerated peroxide out of the cathode, away from catalyst particles, which improved cathode durability, but PVDF also decreased the binder conductivity and slowed oxygen reduction kinetics, resulting in lower power densities. A 75:25 w:w Nafion:PVDF fiber cathode MEA was the best compromise for maximizing power and minimizing catalyst degradation. For such a cathode, with a PGM-free cathode catalyst loading of 3.0 mg cm –2 , a power density of 88 mW cm –2 at 0.5 V, 80 °C, and 200 kPa abs pressure was maintained for 80 h of continuous operation.
Fabrication of PBI/SPOSS hybrid high-temperature proton exchange membranes using SPAEK as compatibilizer
Not Available