Search NASA⌕ Search

SEARCH · Search NASA

Results for “remote sensors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

The capability of satellite borne remote sensors to measure stratospheric trace constituents. Volume 3: Supporting material

Contained in this volume is material of a supportive nature not considered to be of sufficient importance to be included in the other two previous volumes. This material is of two types:(1) information and numerical evaluations used in the development of mission evaluations for stratospheric trace constituent measurement;and (2) various spatial and temporal distributions for those stratospheric trace species having sufficient measurements available to warrant their presentation.

Keitz, E. L.↗
NASA NTRS1979

Diazo techniques for remote sensor data analysis

Cost and time to extract land use maps, natural-resource surveys, and other data from aerial and satellite photographs are reduced by diazo processing. Process can be controlled to enhance features such as vegetation, land boundaries, and bodies of water.

Mount, S.↗
NASA NTRS1979

Evaluation of the spatial and temporal measurement requirements of remote sensors for monitoring regional air pollution episodes

The spatial and temporal measurement requirements of satellite sensors for monitoring regional air pollution episodes were evaluated. Use was made of two sets of data from the Sulfate Regional Experiment (SURE), which provided the first ground-based aerosol measurements from a regional-scale station network. The sulfate data were analyzed for two air pollution episode cases. The results of the analysis indicate that the key considerations required for episode mapping from satellite sensors are the following: (1) detection of sulfate levels exceeding 20 micron-g/cu m; (2) capability to view a broad area (of the order of 1500 km swath) because of regional extent of pollution episodes; (3) spatial resolution sufficient to detect variations in sulfate levels of greater than 10 micron-g/cu m over distances of the order of 50 to 75 km; (4) repeat coverage at least on a daily basis; and (5) satellite observations during the mid to late morning local time, when the sulfate levels have begun to increase after the early morning minimum levels, and convective-type cloud cover has not yet increased to the amount reached later in the afternoon. Analysis of the satellite imagery shows that convective clouds can obscure haze patterns. Additional parameters based on spectral analysis include wavelength and bandwidth requirements.

Burke, H. H. K.↗
NASA NTRS1981

Data reduction analysis and application technique development for atmospheric trace gas constituents derived from remote sensors on satellite or airborne platforms

The applicability of the gas filter correlation radiometer (GFCR) to the measurement of tropospheric carbon monoxide gas was investigated. An assessment of the GFRC measurement system to a regional measurement program was conducted through extensive aircraft flight-testing of several versions of the GFRC. Investigative work in the following areas is described: flight test planning and coordination, acquisition of verifying CO measurements, determination and acquisition of supporting meteorological data requirements, and development of supporting computational software.

Casas, J. C.↗
NASA NTRS1982

Atmospheric Correction for Remote Sensor Data

Mathematical model based on radiative transfer theory as applied to plane parallel, horizontally spatially homogeneous, isotropic atmosphere. Model includes effects of multiple scattering by gases and aerosols, and effects of absorption by ozone in near ultraviolet and visible parts of spectrum.

Turner, R. E.↗
NASA NTRS1982

Inversion of data from diffraction-limited multiwavelength remote sensors. II - Nonlinear dependence of observables on the geophysical parameters

Linear shift-invariant spatial filtering is applied to inversion of radiometric measurements of the earth in both polarizations at the following frequencies: 6.6, 10.7, 18, 21, and 37 GHz. For purposes of radiative transfer calculations at these frequencies, the state of the ocean-atmosphere system is described by a seven-parameter model. The parameters are near-surface wind speed, sea surface temperature, integrated water vapor mass, scale height of water vapor in an exponential distribution, integrated liquid water mass, height of the liquid water, and characteristic drop radius in a Best (1950) drop size distribution. Also described is a spatial filtering algorithm by means of which geophysical parameters are retrieved from measurements made over the ocean by the scanning multichannel microwave radiometer on the Nimbus 7 satellite. The parameters here are near-surface wind speed, sea surface temperature, rain rate, integrated atmospheric water vapor content, and integrated liquid water content (including rain).

Rosenkranz, P. W.↗
NASA NTRS1986

Middle and upper tropospheric carbon monoxide mixing ratios as measured by a satellite-borne remote sensor during November 1981

Mixing ratios of tropospheric carbon monoxide measured by a gas filter radiometer carried aboard the Space Shuttle during November 1981 are reported. The data represent average mixing ratios in the middle and upper troposphere between 38 deg N and 38 deg S latitude. Approximately 10,000 individual measurements were obtained in each of the two channels of the instrument. The data are presented in the form of plots that show the individual carbon monoxide mixing ratio measurements as a function of latitude and longitude and in the form of maps that show the data averaged over 5 deg latitude by 5 deg longitude squares. The data show relatively little variation in the mixing ratio in the Southern Hemisphere; however, the data from both the tropics and the Northern Hemisphere show strong gradients with both latitude and longitude.

Reichle, H. G., Jr.↗
NASA NTRS1987

Calibration requirements and methodology for remote sensors viewing the ocean in the visible

The calibration requirements for ocean-viewing sensors are outlined, and the present methods of effecting such calibration are described in detail. For future instruments it is suggested that provision be made for the sensor to view solar irradiance in diffuse reflection and that the moon be used as a source of diffuse light for monitoring the sensor stability.

Gordon, Howard R.↗
NASA NTRS1989

Evaluation of the ability of various remote sensors to map distributions of suspended sediments in the Gulf of Alaska

In the present investigation of the ability of various satellite-borne imaging systems to detect surface-suspended sediments, which tracked mushroom-shaped dipole eddies in a near shore current during April 22, 1985, it was found that the radiometric resolutions of the NOAA and DMSP satellites are insufficient to distinguish such eddies in low concentrations of suspended sediments. The Landsat TM can, however, detect the spiral structure of the dipole eddies in all three of its visible bands; the Landsat MSS can detect such details in Band 1, and the overall shape in Band 2.

Ahlnas, Kristina↗
NASA NTRS1990

Radiometric considerations for ocean color remote sensors

A methodology for determination of the effects of radiometric noise on the performance of ocean color sensors is developed and applied to the Coastal Zone Color Scanner on Nimbus 7 and the Moderate Resolution Imaging Spectrometer planned for the Earth Observing System.

Gordon, Howard R.↗
NASA NTRS1991

Calibrated intercepts for solar radiometers used in remote sensor calibration

Calibrated solar radiometer intercepts allow spectral optical depths to be determined for days with intermittently clear skies. This is of particular importance on satellite sensor calibration days that are cloudy except at the time of image acquisition. This paper describes the calibration of four solar radiometers using the Langley-Bouguer technique for data collected on days with a clear, stable atmosphere. Intercepts are determined with an uncertainty of less than six percent, corresponding to a maximum uncertainty of 0.06 in optical depth. The spread of voltage intercepts calculated in this process is carried through three methods of radiometric calibration of satellite sensors to yield an uncertainty in radiance at the top of the atmosphere of less than one percent associated with the uncertainty in solar radiometer intercepts for a range of ground reflectances.

Gellman, David I.↗
NASA NTRS1994

Characterizing the wake vortex signature for an active line of sight remote sensor

A recurring phenomenon, described as a wake vortex, develops as an aircraft approaches the runway to land. As the aircraft moves along the runway, each of the wing tips generates a spiraling and expanding cone of air. During the lifetime of this turbulent event, conditions exist over the runway which can be hazardous to following aircraft, particularly when a small aircraft is following a large aircraft. Left to themselves, these twin vortex patterns will converge toward each other near the center of the runway, harmlessly dissipating through interaction with each other or by contact with the ground. Unfortunately, the time necessary to disperse the vortex is often not predictable, and at busy airports can severely impact terminal area productivity. Rudimentary methods of avoidance are in place. Generally, time delays between landing aircraft are based on what is required to protect a small aircraft. Existing ambient wind conditions can complicate the situation. Reliable detection and tracking of a wake vortex hazard is a major technical problem which can significantly impact runway productivity. Landing minimums could be determined on the basis of the actual hazard rather than imposed on the basis of a worst case scenario. This work focuses on using a windfield description of a wake vortex to generate line-of-sight Doppler velocity truth data appropriate to an arbitrarily located active sensor such as a high resolution radar or lidar. The goal is to isolate a range Doppler signature of the vortex phenomenon that can be used to improve detection. Results are presented based on use of a simplified model of a wake vortex pattern. However, it is important to note that the method of analysis can easily be applied to any vortex model used to generate a windfield snapshot. Results involving several scan strategies are shown for a point sensor with a range resolution of 1 to 4 meters. Vortex signatures presented appear to offer potential for detection and tracking.

Heil, Robert Milton↗