Wrinkles Riding Waves in Soft Layered Materials
Explore the source record for details and available documents.
Maroun Abi Ghanem↗
SEARCH · Search NASA
Results for “ride”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ride comfort control in large flexible aircraft
The problem of ameliorating the discomfort of passengers on a large air transport subject to flight disturbances is examined. The longitudinal dynamics of the aircraft, including effects of body flexing, are developed in terms of linear, constant coefficient differential equations in state variables. A cost functional, penalizing the rigid body displacements and flexure accelerations over the surface of the aircraft is formulated as a quadratic form. The resulting control problem, to minimize the cost subject to the state equation constraints, is of a class whose solutions are well known. The feedback gains for the optimal controller are calculated digitally, and the resulting autopilot is simulated on an analog computer and its performance evaluated.
Warren, M. E.↗
Tests and analyses applicable to passenger ride quality of large transport aircraft
A test program was undertaken to determine airline passenger reaction to vibration environments that might be encountered in a supersonic transport or other large commercial jet aircraft. The principal problem addressed was to determine accelerations of vertical and lateral vibration that people find objectionable. Further questions experimentally posed were: (1) what is the relationship between human reactions to vertical and lateral vibration, (2) to single- and combined-frequency vibration, and (3) to single- and combined-axis vibration? Interest was confined to reactions to vibration in the frequency range of 0.20 to 7.0 Hz, a range typical of the vibration environment of a large airplane. Results indicated an increasing sensitivity to vertical vibration as frequency was increased from 1.0 to 7.0 Hz. Subjects were found most sensitive to lateral vibration in the 1.0 to 3.0 Hz range. There was a nearly linear decrease in sensitivity as frequency of lateral vibration was increased from 3.0 to 7.0 Hz.
Holloway, R. B.↗
Effect of vertical active vibration isolation on tracking performance and on ride qualities
An investigation to determine the effect on pilot performance and comfort of an active vibration isolation system for a commercial transport pilot seat is reported. The test setup consisted of: a hydraulic shaker which produced random vertical vibration inputs; the active vibration isolation system; the pilot seat; the pilot control wheel and column; the side-arm controller; and a two-axis compensatory tracking task. The effects of various degrees of pilot isolation on short-term (two-minute) tracking performance and comfort were determined.
Dimasi, F. P.↗
Ride quality evaluation 1: Questionnaire studies of airline passenger comfort
As part of a larger effort to assess passenger comfort in aircraft, two questionnaires were administered: one to ground-based respondents; the other to passengers in flight. Respondents indicated the importance of various factors influencing their satisfaction with a trip, the perceived importance of various physical factors in determining their level of comfort, and the ease of time spent performing activities in flight. The in-flight sample also provided a rating of their level of comfort and of their willingness to fly again. Comfort ratings were examined in relation to (1) type of respondent, (2) type of aircraft, (3) characteristics of the passengers, (4) ease of performing activities, and (5) willingness to fly again.
Richards, L. G.↗
Flight research experiments to determine ride quality and passenger acceptance
Explore the source record for details and available documents.
Jacobson, I. D.↗
Gust alleviation system to improve ride comfort of light airplanes
System consists of movable auxiliary aerodynamic sensors mounted on fuselage and connected to trailing-edge flaps by rigid mechanical linkages. System achieves alleviation by reducing lift-curve slope of airplane to such a small value that gust-induced angles of attack will result in small changes in lift.
Stewart, E. C.↗
Preliminary ride-quality evaluation of the HM.2 Hoverferry
The results of a forty-minute exposure of the HM.2 Hoverferry are presented. Quantitative evaluations were made from aft seats on the starboard side for a sea state considered calm and visually estimated at one-half to one foot. Since this type of craft is sensitive to sea state, the conclusions are based on ideal conditions. Some drawings are included.
Mcclurken, E. W., Jr.↗
Ride quality evaluation. I
As part of a larger effort to assess passenger comfort in aircraft, two questionnaires were administered: one to ground-based respondents, the other to passengers in flight. Respondents indicated the importance of various factors influencing their satisfaction with a trip, the perceived importance of various physical factors in determining their level of comfort, and the ease of time spent performing activities in flight. The in-flight sample also provided a rating of their level of comfort and of their willingness to fly again. Comfort ratings were examined in relation to (1) type of respondent, (2) type of aircraft, (3) characteristics of the passengers, (4) ease of performing activities, and (5) willingness to fly again.
Richards, L. G.↗
Development of ride comfort criteria for mass transient systems
Explore the source record for details and available documents.
Kirby, R. H.↗
University of Virginia acquisition of passenger ride quality data aboard the Total In-Flight Simulator (TIFS)
The subjective response of passengers to vehicle motions was investigated on the Total In-Flight Simulator (TIFS) aircraft. Prerecorded signals were converted into controlled aircraft motion for evaluation by ten subjects on a seven-point rating scale. Eighteen test flights were flown on August and September 1974, the results of which are to be used in validation studies on ground based simulators at NASA/Langley Research Center and to extend passenger response models.
Mcclurken, E. W., Jr.↗
Integration of visual and motion cues for simulator requirements and ride quality investigation
Preliminary tests and evaluation are presented of pilot performance during landing (flight paths) using computer generated images (video tapes). Psychophysiological factors affecting pilot visual perception were measured. A turning flight maneuver (pitch and roll) was specifically studied using a training device, and the scaling laws involved were determined. Also presented are medical studies (abstracts) on human response to gravity variations without visual cues, acceleration stimuli effects on the semicircular canals, and neurons affecting eye movements, and vestibular tests.
Young, L. R.↗
Vehicle for civil helicopter ride quality research
A research aircraft for investigating the factors involved in civil helicopter operations was developed for NASA Langley Research Center. The aircraft is a reconfigured 17000 kg (36000 lb) military transport helicopter. The basic aircraft was reconfigured with advanced acoustic treatment, air-conditioning, and a 16-seat airline cabin. During the spring of 1975, the aircraft was flight tested to measure interior environment characteristics - noise and vibration - and was flown on 60 subjective flight missions with over 600 different subjects. Data flights established noise levels somewhat higher than expected, with a pure tone at 1400 Hz and vertical vibration levels between 0.07g and 0.17g. The noise and vibration levels were documented during subjective flight evaluations as being the primary source of discomfort. The aircraft will be utilized to document in detail the impact of various noise and vibration levels on passenger comfort during typical short-haul missions.
Snyder, W. J.↗
Effect of vibration in combined axes on subjective evaluation of ride quality
The effects of simultaneous sinusoidal vibration in the vertical and lateral axes on ratings of discomfort were investigated. The first experiment concentrated on the effects of variation of frequency in the two axes, and the second study concentrated on the effects of amplitude variation in the two axes.
Kirby, R. H.↗
Passenger ride quality response to an airborne simulator environment
The present study was done aboard a special aircraft able to effect translations through the center of gravity with a minimum of pitch and roll. The aircraft was driven through controlled motions by an on-board analog computer. The input signal was selectively filtered Gaussian noise whose power spectra approximated that of natural turbulence. This input, combined with the maneuvering capabilities of this aircraft, resulted in an extremely realistic simulation of turbulent flight. The test flights also included varying bank angles during turns. Subjects were chosen from among NASA Flight Research Center personnel. They were all volunteers, were given physical examinations, and were queried about their attitudes toward flying before final selection. In profile, they were representative of the general flying public. Data from this study include (1) a basis for comparison with previous commercial flights, that is, motion dominated by vertical acceleration, (2) extension to motion dominated by lateral acceleration, and (3) evaluation of various bank angles.
Wolf, T. D.↗
Reaction of passengers to public service vehicle ride
A series of questionnaire studies is described, which was carried out on passengers in public service vehicles in the United Kingdom particularly cross-channel hovercraft, helicopter and train. The effectiveness of the different rating techniques employed is examined and it is demonstrated that useful and reliable information can be obtained on the effects of such physical parameters as vibration, vehicle motion and noise using rating methods which involve no external standards. Some results obtained from analysis of the survey returns are presented.
Clarke, M. J.↗
Vibration simulator studies for the development of passenger ride comfort criteria
A test program to determine the total discomfort associated with vehicle vibration is described. The program utilizes a three-degree-of-freedom vibration simulator to determine the effects of multifrequency and multiaxis vibration inputs. The approach to multifrequency vibration includes a separate consideration of the discomfort associated with each frequency component or band of the total spectrum and a subsequent empirical weighting of the discomfort components of these frequency bands when in various random combinations. The results are in the form of equal discomfort curves that specify the discomfort associated with discrete frequencies between 1 and 30 Hz and different acceleration levels. These results provide detailed information of the human discomfort response to increases in acceleration level for each frequency investigated. More importantly, the results provide a method for adding the discomfort associated with separate frequencies to give a total typification of the discomfort of a random spectrum of vibration.
Dempsey, T. K.↗
Development of ride comfort criteria for mass transit systems
Two studies were conducted on the effects of simultaneous sinusoidal vibration in the vertical and lateral axes on ratings of discomfort in human subjects in a simulated passenger aircraft. In the first experiment each of 24 subjects experienced each of ten levels of vertical frequency in combination with each of ten levels of lateral frequency vibration and rated the discomfort produced on a nine-point, unipolar scale. In the second experiment 72 subjects experienced one of four levels of vertical frequency at each of four levels of vertical amplitude combined with 16 (or 4 x 4) lateral frequency and amplitude conditions. The results of these two studies strongly suggest that there are effects on discomfort that occur when subjects are vibrated in several axes at once that cannot be assessed with research using vibration in only one axis.
Kirby, R. H.↗