Search NASA⌕ Search

SEARCH · Search NASA

Results for “sea surface winds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Modeling the small-scale deposition of snow onto structured Arctic sea ice during a MOSAiC storm using snowBedFoam 1.0.

The remoteness and extreme conditions of the Arctic make it a very difficult environment to investigate. In these polar regions covered by sea ice, the wind is relatively strong due to the absence of obstructions and redistributes a large part of the deposited snow mass, which complicates estimates for precipitation hardly distinguishable from blowing or drifting snow. Moreover, the snow mass balance in the sea ice system is still poorly understood, notably due to the complex structure of its surface. Quantitatively assessing the snow distribution on sea ice and its connection to the sea ice surface features is an important step to remove the snow mass balance uncertainties (i.e., snow transport contribution) in the Arctic environment. In this work we introduce snowBedFoam 1.0., a physics-based snow transport model implemented in the open-source fluid dynamics software OpenFOAM. We combine the numerical simulations with terrestrial laser scan observations of surface dynamics to simulate snow deposition in a MOSAiC (Multidisciplinary Drifting Observatory for the Study of Arctic Climate) sea ice domain with a complicated structure typical for pressure ridges. The results demonstrate that a large fraction of snow accumulates in their vicinity, which compares favorably against scanner measurements. However, the approximations imposed by the numerical framework, together with potential measurement errors (precipitation), give rise to quantitative inaccuracies, which should be addressed in future work. The modeling of snow distribution on sea ice should help to better constrain precipitation estimates and more generally assess and predict snow and ice dynamics in the Arctic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Doppler-Lidar Evaluation of HRRR-Model Skill at Simulating Summertime Wind Regimes in the Columbia River Basin during WFIP2

Complex-terrain locations often have repeatable near-surface wind patterns, such as synoptic gap flows and local thermally forced flows. An example is the Columbia River Valley in east-central Oregon-Washington, a significant wind-energy-generation region and the site of the Second Wind-Forecast Improvement Project (WFIP2). Data from three Doppler lidars deployed during WFIP2 define and characterize summertime wind regimes and their large-scale contexts, and provide insight into NWP model errors by examining differences in the ability of a model [NOAA’s High-Resolution Rapid-Refresh (HRRR-version1)] to forecast wind-speed profiles for different regimes. Seven regimes were identified based on daily time series of the lidar-measured rotor-layer winds, which then suggested two broad categories. First, in three regimes the primary dynamic forcing was the large-scale pressure gradient. Second, in two regimes the dominant forcing was the diurnal heating-cooling cycle (regional sea-breeze-type dynamics), including the marine intrusion previously described, which generates strong nocturnal winds over the region. The other two included a hybrid regime and a non-conforming regime. For the large-scale pressure-gradient regimes, HRRR had wind-speed biases of ~1 m s -1 and RMSEs of 2-3 m s -1 . Errors were much larger for the thermally forced regimes, owing to the premature demise of the strong nocturnal flow in HRRR. Thus, the more dominant the role of surface heating in generating the flow, the larger the errors. Major errors could result from surface heating of the atmosphere, boundary-layer responses to that heating, and associated terrain interactions. Finally, measurement/modeling research programs should be aimed at determining which modeled processes produce the largest errors, so those processes can be improved and errors reduced.

17 WIND ENERGY↗
DOE OSTI2023

Observations of Offshore Internal Boundary Layers

The growth of the marine internal boundary layer (MIBL, height h i ) with the shore-normal distance x, is a topic of continuing interest because of its applications in coastal dispersion, offshore wind farm siting, coastal air-sea fluxes and in evaporative ducting. Available data on MIBL are only scarce, given its difficult to measure the variability of coastal winds. During Coupled Air-Sea Processes and Electromagnetic Research (CASPER) campaigns an array of instrumentation was deployed to measure offshore spatial variability and its effect on electromagnetic wave propagation. Meteorological sensors (flux towers and remote sensing) were deployed along the coast of Point Mugu, California, on a research vessel and FLoating Instrument Platform (FLIP) provided surface layer and boundary layer observations. In this article, measurements from multiple remote sensing instruments, such as synchronized triple Doppler lidars, small boat operations with tethered lifting system, and radiosondes provide a holistic view of the MIBL growth and its spatial variability from the coast. A convective and stable MIBL observed during two intensive operating period days showed distinct growth characteristics off the coast of Point-Mugu. During stable stratified atmospheric conditions, an MIBL was observed at least up to 47 km from the coast. The growth of the MIBL within the nearshore adjustment zone was influenced by surrounding atmospheric, oceanographic, and topographic conditions. A new parameterization scheme is developed based on advection-diffusion balance equations accounting for upstream turbulence and compared with h i observations from Doppler lidar and profiles from small boat. An evaluation of existing IBL theories was also conducted.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Profile observations of the Arctic atmospheric boundary layer with the BELUGA tethered balloon during MOSAiC

During the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition, the Balloon-bornE moduLar Utility for profilinG the lower Atmosphere (BELUGA) was deployed from an ice floe drifting in the Fram Strait from 29 June to 27 July 2020. The BELUGA observations aimed to characterize the cloudy Arctic atmospheric boundary layer above the sea ice using a modular setup of five instrument packages. The in situ measurements included atmospheric thermodynamic and dynamic state parameters (air temperature, humidity, pressure, and three-dimensional wind), broadband solar and terrestrial irradiance, aerosol particle microphysical properties, and cloud particle images. In total, 66 profile observations were collected during 33 balloon flights from the surface to maximum altitudes of 0.3 to 1.5 km. The profiles feature a high vertical resolution of 0.01 m to 1 m, including measurements below, inside, and above frequently occurring low-level clouds. This publication describes the balloon operations, instruments, and the obtained data set. We invite the scientific community for joint analysis and model application of the freely available data on PANGAEA.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Gulf of Mexico Turbulence Intensity Model Data

The dataset is a subset of simulations carried out for the Gulf of Mexico region using the revised Weather Research and Forecasting (WRF) model version 4.2 that incorporates the implementation of online turbulence intensity (TI) calculations (Tai et al. 2023). The simulated atmospheric profiles near the Shell Exploration and Production Corporation's Tension Leg Platforms Ursa and Mars are archived. Physics parameterizations chosen for the simulations include the Thompson microphysics parameterization, Mellor-Yamada-Nakanishi Niino (MYNN) boundary layer parameterization, Mellor-Yamada-Janjic surface layer parameterization, Unified Noah land-surface parameterization, and the RRTMG longwave and shortwave radiation parameterization. Initial and boundary conditions are taken from NOAA’s High-Resolution Rapid Refresh (HRRR) product. The JPL 0.01-degree Level 4 Multiscale Ultrahigh Resolution (MUR) Global Foundation Sea Surface Temperature (SST) Analysis (V4.1) data are used as the model’s SST forcing. Simulations are performed from January through June in 2020 and output every 10 minutes, which permits comparison with corresponding lidar observations.

17 WIND ENERGY↗
DOE OSTI2024

Gulf of Mexico Turbulence Intensity Model Data

The dataset is a subset of simulations carried out for the Gulf of Mexico region using the revised Weather Research and Forecasting (WRF) model version 4.2 that incorporates the implementation of online turbulence intensity (TI) calculations (Tai et al. 2023). The simulated atmospheric profiles near the Shell Exploration and Production Corporation's Tension Leg Platforms Ursa and Mars are archived. Physics parameterizations chosen for the simulations include the Thompson microphysics parameterization, Mellor-Yamada-Nakanishi Niino (MYNN) boundary layer parameterization, Mellor-Yamada-Janjic surface layer parameterization, Unified Noah land-surface parameterization, and the RRTMG longwave and shortwave radiation parameterization. Initial and boundary conditions are taken from the NOAA’s High-Resolution Rapid Refresh (HRRR) product. The JPL 0.01-degree Level 4 Multiscale Ultrahigh Resolution (MUR) Global Foundation Sea Surface Temperature (SST) Analysis (V4.1) data are used as the model’s SST forcing. Simulations are performed from January through June in 2020 and output every 10 minutes, which permits comparison with corresponding lidar observations.

17 WIND ENERGY↗
DOE OSTI2024

Mid-Atlantic Turbulence Intensity Model Data

The dataset is a subset of simulations carried out for the mid-Atlantic region using the revised Weather Research and Forecasting (WRF) model version 4.2 that incorporates the implementation of online turbulence intensity (TI) calculations (Tai et al. 2023). The simulated atmospheric profiles near the Air-Sea Interaction Tower (ASIT) of Woods Hole Oceanographic Institution’s Martha's Vineyard Coastal Observatory are archived. Physics parameterizations chosen for the simulations include the Thompson microphysics parameterization, Mellor-Yamada-Nakanishi Niino (MYNN) boundary layer parameterization, Mellor-Yamada-Janjic surface layer parameterization, Unified Noah land-surface parameterization, and the RRTMG longwave and shortwave radiation parameterization. Initial and boundary conditions are taken from NOAA’s High-Resolution Rapid Refresh (HRRR) product. The JPL 0.01-degree Level 4 Multiscale Ultrahigh Resolution (MUR) Global Foundation Sea Surface Temperature (SST) Analysis (V4.1) data are used as the model’s SST forcing. Simulations are performed from February through June in 2020 and output every 10 minutes, which permits comparison with corresponding lidar observations.

17 WIND ENERGY↗
DOE OSTI2025

Sea spray aerosol production flux retrieval based on Doppler lidar measurements

Supermicron sea spray aerosols (SSA) play a crucial role in stratocumulus cloud microphysics and drizzle formation. However, our understanding of SSA's spatiotemporal distribution, production mechanisms, and fluxes in the marine boundary layer remains limited. This study introduces a novel approach to determine supermicron SSA production flux and number concentration at various heights above the ocean surface. Our method leverages Doppler lidar data, specifically attenuated backscatter and vertical velocity, collected at a 105 m range gate during the Eastern Pacific Clouds and Aerosols for Precipitation Experiment (EPCAPE) at Scripps Pier, La Jolla, California. To focus on nascent SSA, we analyzed data from periods with wind directions between 225° and 315° and wind speeds exceeding 4 m s −1 . Cloud and precipitation events were excluded using relative humidity, backscatter thresholds, and 2D Video Disdrometer observations. Results show that calculated supermicron SSA number concentrations at 105 m ranged from 0.26 to 2.93 cm −3 for surface wind speeds between 4 and 6 ms −1 . When exceeding the method's Limit of Detection, estimated production fluxes ranged from 0.20 to 1.53 cm −2 s −1 . This methodology has potential for application in various oceanic locations, likely enhancing our understanding of SSA's role in atmospheric processes and climate interactions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Contrasting characteristics of open- and closed-cellular stratocumulus cloud in the eastern North Atlantic

Abstract. Extensive regions of marine boundary layer cloud impact the radiative balance through their significant shortwave albedo while having little impact on outgoing longwave radiation. Despite this importance, these cloud systems remain poorly represented in large-scale models due to difficulty in representing the processes that drive their life cycle and coverage. In particular, the mesoscale organization and cellular structure of marine boundary clouds have important implications for the subsequent cloud feedbacks. In this study, we use long-term (2013–2018) observations from the Atmospheric Radiation Measurement (ARM) Facility's Eastern North Atlantic (ENA) site on Graciosa Island, Azores, Portugal, to identify cloud cases with open- or closed-cellular organization. More than 500 h of each organization type are identified. The ARM observations are combined with reanalysis and satellite products to quantify the cloud, precipitation, aerosol, thermodynamic, and large-scale synoptic characteristics associated with these cloud types. Our analysis shows that both cloud organization populations occur during similar sea surface temperature conditions, but the open-cell cases are distinguished by stronger cold-air advection and large-scale subsidence compared to the closed-cell cases, consistent with their formation during cold-air outbreaks. We also find that the open-cell cases were associated with deeper boundary layers, stronger low-level winds, and higher rain rates compared to their closed-cell counterparts. Finally, raindrops with diameters larger than 1 mm were routinely recorded at the surface during both populations, with a higher number of large drops during the open-cellular cases. The similarities and differences noted herein provide important insights into the environmental and cloud characteristics during varying marine boundary layer cloud mesoscale organization and will be useful for the evaluation of model simulations for ENA marine clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Post-processed surface meteorological, air-sea flux, SST, wave, and ship navigation/position merged data from NOAA Ship Pisces

These are post-processed surface data from the NOAA Ship Pisces, merged from several instruments. They consist of meteorological, ocean, ship navigation/position, and surface air-sea flux quantities calculated at three different time frequencies. Because the averaging of directions can be complex, they are provided as a courtesy. R1 in the filename indicates "revision 1" or version 1. R2 will include surface waves (TBD).

17 WIND ENERGY↗
DOE OSTI2021

Aerosol responses to precipitation along North American air trajectories arriving at Bermuda

North American pollution outflow is ubiquitous over the western North Atlantic Ocean, especially in winter, making this location a suitable natural laboratory for investigating the impact of precipitation on aerosol particles along air mass trajectories. We take advantage of observational data collected at Bermuda to seasonally assess the sensitivity of aerosol mass concentrations and volume size distributions to accumulated precipitation along trajectories (APT). The mass concentration of particulate matter with aerodynamic diameter less than 2.5 µm normalized by the enhancement of carbon monoxide above background (PM 2.5 /ΔCO) at Bermuda was used to estimate the degree of aerosol loss during transport to Bermuda. Results for December–February (DJF) show that most trajectories come from North America and have the highest APTs, resulting in a significant reduction (by 53 %) in PM 2.5 /ΔCO under high-APT conditions (> 13.5 mm) relative to low-APT conditions (< 0.9 mm). Moreover, PM 2.5 /ΔCO was most sensitive to increases in APT up to 5 mm (–0.044 µg m –3 ppbv –1 mm –1 ) and less sensitive to increases in APT over 5 mm. While anthropogenic PM 2.5 constituents (e.g., black carbon, sulfate, organic carbon) decrease with high APT, sea salt, in contrast, was comparable between high- and low-APT conditions owing to enhanced local wind and sea salt emissions in high-APT conditions. The greater sensitivity of the fine-mode volume concentrations (versus coarse mode) to wet scavenging is evident from AErosol RObotic NETwork (AERONET) volume size distribution data. A combination of GEOS-Chem model simulations of the 210 Pb submicron aerosol tracer and its gaseous precursor 222 Rn reveals that (i) surface aerosol particles at Bermuda are most impacted by wet scavenging in winter and spring (due to large-scale precipitation) with a maximum in March, whereas convective scavenging plays a substantial role in summer; and (ii) North American 222 Rn tracer emissions contribute most to surface 210 Pb concentrations at Bermuda in winter (~75 %–80 %), indicating that air masses arriving at Bermuda experience large-scale precipitation scavenging while traveling from North America. A case study flight from the ACTIVATE field campaign on 22 February 2020 reveals a significant reduction in aerosol number and volume concentrations during air mass transport off the US East Coast associated with increased cloud fraction and precipitation. These results highlight the sensitivity of remote marine boundary layer aerosol characteristics to precipitation along trajectories, especially when the air mass source is continental outflow from polluted regions like the US East Coast.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Northern Pacific Turbulence Intensity Model Data

The dataset is a subset of simulations carried out for the northern Pacific region using the revised Weather Research and Forecasting (WRF) model version 4.2 that incorporates the implementation of online turbulence intensity (TI) calculations (Tai et al. 2023). The simulated atmospheric profiles near the lidar buoys deployed off the coast of California (Humbolt and Morro Bay) are archived. Physics parameterizations chosen for the simulations include the Thompson microphysics parameterization, Mellor-Yamada-Nakanishi Niino (MYNN) boundary layer parameterization, Mellor-Yamada-Janjic surface layer parameterization, Unified Noah land-surface parameterization, and the RRTMG longwave and shortwave radiation parameterization. Initial and boundary conditions are taken from NOAA’s High-Resolution Rapid Refresh (HRRR) product. The JPL 0.01-degree Level 4 Multiscale Ultrahigh Resolution (MUR) Global Foundation Sea Surface Temperature (SST) Analysis (V4.1) data are used as the model’s SST forcing. Simulations are performed from November to December in 2020 and May through June in 2021. Model outputs every 10 minutes, permitting comparison with corresponding lidar observations.

17 WIND ENERGY↗
DOE OSTI2024

Decadal Thermal Variability of the Upper Southern Ocean: Zonal Asymmetry

Abstract As the major sink of anthropogenic heat, the Southern Ocean has shown quasi-symmetric, deep-reaching warming since the mid-twentieth century. In comparison, the shorter-term heat storage pattern of the Southern Ocean is more complex and has notable impacts on regional climate and marine ecosystems. By analyzing observational datasets and climate model simulations, this study reveals that the Southern Ocean exhibits prominent decadal (>8 years) variability extending to ∼700-m depth and is characterized by out-of-phase changes in the Pacific and Atlantic–Indian Ocean sectors. Changes in the Pacific sector are larger in magnitude than those in the Atlantic–Indian Ocean sectors and dominate the total heat storage of the Southern Ocean on decadal time scales. Instead of heat uptake through surface heat fluxes, these asymmetric variations arise primarily from wind-driven heat redistribution. Pacemaker and preindustrial simulations of the Community Earth System Model version 1 (CESM1) suggest that these variations in Southern Ocean winds arise primarily from natural variability of the tropical Pacific, as represented by the interdecadal Pacific oscillation (IPO). Through atmospheric teleconnection, the positive phase of the IPO gives rise to higher-than-normal sea level pressure and anticyclonic wind anomalies in the 50°–70°S band of the Pacific sector. These winds lead to warming of 0–700 m by driving the convergence of warm water. The opposite processes, involving cyclonic winds and upper-layer divergence, occur in the Atlantic–Indian Ocean sector. These findings aid our understanding of the time-varying heat storage of the Southern Ocean and provide useful implications on initialized decadal climate prediction.

Meteorology & Atmospheric Sciences↗
DOE OSTI2026

Seasonal variation of the surface cross-shelf exchange in the northern South China Sea: a Lagrangian perspective

Previous studies on cross-shelf exchange, predominantly adopted an Eulerian perspective, struggled to identify water sources and pathways. Using a high-resolution regional ocean modeling system (ROMS) and Lagrangian particle tracking, this study systematically investigates the seasonal variation and dynamics of surface cross-shelf exchange in the northern South China Sea (NSCS) from a Lagrangian perspective. Based on daily released 30-day drifter trajectories we identify the key pathways, source regions for surface cross-shelf exchange, revealing pronounced seasonal variability. Results show the surface cross-shelf exchange generally following monsoon-driven Ekman transport. However, local dynamics, especially topographic modulation, can outweigh the expected Ekman-driven transport, producing surface exchange patterns opposite to that predicted from the prevailing winds. Topographic effects vary across different scales. In the coastal waters of western Guangdong during winter, despite downwelling-favorable winds, the modulation of alongshore currents by island topography induces an eastward pressure gradient. This gradient, through geostrophic balance, drives offshore flows opposite to wind-driven Ekman onshore transport. Furthermore, the eastern widened shelf exhibits a distinct seasonal variation of cross-shelf exchange, with strong offshore transport (opposite to the direction of Ekman transport) in winter and exceedingly weak exchange in summer. Analysis of the underlying mechanisms reveals that this winter offshore transport is primarily attributed to geostrophic flows driven by surface pressure gradient that is jointly modulated by the Kuroshio intrusion and local widened shelf topography, and enhanced by cumulative submesoscale processes. In summer, a persistent and strong along-isobath jet acts as a dynamic barrier, effectively suppressing the exchange. These findings highlight the important role of topography in regulating surface material transport, and have important implications for predicting the advection and dispersion of plankton or oil spills over the continental shelf influenced by monsoon.

Hao, Dongliang↗
DOE OSTI2020

Relating CMIP5 Model Biases to Seasonal Forecast Skill in the Tropical Pacific

Abstract We examine links between tropical Pacific mean state biases and El Niño/Southern Oscillation forecast skill, using model‐analog hindcasts of sea surface temperature (SST; 1961–2015) and precipitation (1979–2015) at leads of 0–12 months, generated by 28 different models from the fifth phase of the Coupled Model Intercomparison Project (CMIP5). Model‐analog forecast skill has been demonstrated to match or even exceed traditional assimilation‐initialized forecast skill in a given model. Models with the most realistic mean states and interannual variability for SST, precipitation, and 10‐m zonal winds in the equatorial Pacific also generate the most skillful precipitation forecasts in the central equatorial Pacific and the best SST forecasts at 6‐month or longer leads. These results show direct links between model climatological biases and seasonal forecast errors, demonstrating that model‐analog hindcast skill—that is, how well a model can capture the observed evolution of tropical Pacific anomalies—is an informative El Niño/Southern Oscillation metric for climate simulations.

Ding, Hui↗
DOE OSTI2020

Forced Patterns of Sea Level Rise in the Community Earth System Model Large Ensemble From 1920 to 2100

To provide context for observed sea level rise, the forced response (FR) in dynamic sea level (DSL) during the 20th and 21st centuries is examined in the Community Earth System Model Large Ensemble (LE). After accounting for simulation drift, which in the LE is sizable, the DSL FR is found to be complex, both in space and time. Its evolving character is suggested to arise from both the diversity and transient evolution of climate forcing agents and the slow adjustment timescales of the intermediate and deep oceans. Nonetheless, various intervals of spatially coherent change simulated for the recent past and near future are identified, and their characteristics and associated driving mechanisms are identified and discussed. The mid- to late-20th century DSL FR is characterized by an hemispherically asymmetric pattern of change, with depressed rates of rise in the northern oceans. There is also a dipole of change in the Southern Ocean caused by changes in near-surface zonal winds. Through the late 20th and early 21st centuries, a different pattern of rise emerges with elevated rates in the tropics and depressed rates at high latitudes. Zonal and interbasin variations characterize both intervals and involve the pattern and depth of anomalous ocean heat content storage and spatial contrasts in the expansion coefficient tied mainly to base state temperature, with greater rates of rise in warm regions per unit warming. Finally, the relative roles of surface flux and ocean convergence anomalies are examined.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Future Changes in Active and Inactive Atlantic Hurricane Seasons in the Energy Exascale Earth System Model

Abstract North Atlantic tropical cyclones (TCs) have considerable interannual variability, with La Niña and the positive phase of the Atlantic Meridional Mode (AMM) tending to drive active hurricane seasons, and El Niño and the negative AMM often driving inactive seasons. Here, we analyze how active and inactive Atlantic hurricane seasons may change in the future using the high resolution Energy Exascale Earth System Model (E3SM). We performed atmosphere‐only simulations forced by sea‐surface temperature patterns characteristic of La Niña and the positive AMM jointly, and El Niño and the negative AMM jointly, in historical and future climates. Projected Atlantic TCs become more frequent in the future by approximately 34% during El Niño and negative AMM and by 66% during La Niña and positive AMM, with a significant increase in the portion of intense TCs. Warmer SSTs increase TC potential intensity, with reduced wind shear and increased mid‐tropospheric humidity further supporting TC activity.

54 ENVIRONMENTAL SCIENCES↗