Search NASA⌕ Search

SEARCH · Search NASA

Results for “selenium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

A field-shaping multi-well avalanche detector for direct conversion amorphous selenium

Purpose: A practical detector structure is proposed to achieve stable avalanche multiplication gain in direct-conversion amorphous selenium radiation detectors. Methods: The detector structure is referred to as a field-shaping multi-well avalanche detector. Stable avalanche multiplication gain is achieved by eliminating field hot spots using high-density avalanche wells with insulated walls and field-shaping inside each well. Results: The authors demonstrate the impact of high-density insulated wells and field-shaping to eliminate the formation of both field hot spots in the avalanche region and high fields at the metal-semiconductor interface. Results show a semi-Gaussian field distribution inside each well using the field-shaping electrodes, and the electric field at the metal-semiconductor interface can be one order-of-magnitude lower than the peak value where avalanche occurs. Conclusions: This is the first attempt to design a practical direct-conversion amorphous selenium detector with avalanche gain.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Enhancing the Circular Polarization of Spin Light-Emitting Diodes by Processing in Selenium Vapor

Spin light-emitting diodes based on InGaAs/GaAs heterostructures with a CoPt ferromagnetic injector were fabricated. It was demonstrated that the processing of these structures in selenium vapor prior to the deposition of a CoPt contact provides an opportunity to enhance the circular polarization degree of diode emission. The observed increase in the polarization degree is attributed to the suppression of spin relaxation at the metal/semiconductor interface due to surface passivation and a reduction in the density of surface electron states as a result of processing in selenium vapor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Developing Cost Effective Biological Removal Technology for Selenium and Nitrate from Flue Gas Desulfurization Wastewater from an Existing Power Facility

Funding from this project supported new research in environmental biotechnology at WVSU Energy and Environmental Science Institute (WVSUEESI) to develop biological treatment techniques for FGD wastewater using photosynthetic organisms algae and plants. We tested the possibility of using algae and plants in treating FGD wastewater. Results suggested that algae and plants could able to perform normal photosynthesis under low concentrations of selenium. However, higher concentrations of selenium are lethal on photosynthesis. The total protein data indicated that FGD wastewater induced the accumulation of complete proteins in the duckweeds compared to control plants. It appears that nitrate, nitrates, and other compounds in FGD wastewater promote total protein accumulation. The FGD wastewater treatment has triggered Triacylglycerols (TAG) and carbohydrate accumulation in duckweed. We studied the differential gene expression using RNA-Sequencing data. Gene expression analysis revealed that glycolysis, fatty acid, triacylglycerol biosynthesis, and starch degradation were up-regulated; on the contrary, gluconeogenesis, photosynthesis, and starch biosynthesis genes were down-regulated by FGD wastewater treatment. We confirmed the expression of some of these genes using q-RT PCR analysis. We demonstrated that when FGD gypsum was blended with the coal mine soil to grow the bioenergy crop, Camelina, it could grow and produce seed. Moreover, Camelina is a non-edible oilseed crop and has heavy metal sequestering properties, making it the right reclamation choice. Besides, this project provided the opportunity for WVSU undergraduates to integrate hands-on research and education. Funding from this grant helped us to enhance student hands-on experience in water quality and environmental science and participation in STEM research and education.

09 BIOMASS FUELS↗

Impact of Selenium and Vitamin E Deficiency on Zika Virus Pathogenesis and Immune Response in Mice

Micronutrient status is recognized to influence host susceptibility to viral infections, yet its impact on Zika virus (ZIKV) pathogenesis remains incompletely understood. We investigated the effects of dietary selenium and combined selenium plus vitamin E deficiency on ZIKV infection outcomes in a type I interferon α/β receptor knockout (Ifnar1 −/− ) murine model. Mice maintained on deficient diets exhibited significantly lower neutralizing antibody titers and reduced levels of key antiviral cytokines (IFN-γ, TNF-α, IFN-α, IFN-β, IL-12p70, CCL5) compared to controls. Correspondingly, higher viral RNA loads were detected in the brains of double-deficient mice, which also experienced greater weight loss and increased mortality. Deep sequencing revealed no major differences in overall viral genome diversity across diet groups; however, specific mutations, including V330L and D67E in the E gene, and V360I in the NS3 gene, were enriched or detected in nutritionally deficient animals. These findings suggest that antioxidant micronutrient deficiency impairs both humoral and cellular immune responses to ZIKV, potentially facilitating enhanced neuroinvasion. While the functional consequences of the identified mutations warrant further investigation, our results underscore the importance of adequate micronutrient intake for optimal antiviral defense. Further studies are needed to clarify the epidemiological significance of these observations.

Biological and medical sciences↗

Selenium-Assisted Nucleic Acid Crystallography: Use of DNA Phosphoroselenoates for MAD Phasing

The combination of synchrotron radiation and a variety of atoms or ions (either covalently attached to the biomolecule prior to crystallization or soaked into crystals) that serve as anomalous scatterers constitutes a powerful tool in the X-ray crystallographer's repertoire of structure determination techniques. Phosphoroselenoates in which one of the nonbridging phosphate oxygens in the backbone is replaced by selenium offer a simplified means for introducing an anomalous scatterer into oligonucleotides by conventional solid-phase synthesis. Unlike other methods that are used to derivatize DNA or RNA by covalent attachment of a heavy atom (i.e., bromine at the C5 position of pyrimidines), tedious synthesis of specialized nucleosides is not required. Introduction of selenium is readily accomplished in solid-phase oligonucleotide synthesis by replacing the standard oxidation agent with a solution of potassium selenocyanide. This results in a diastereomeric mixture of phosphoroselenoates that can be separated by strong anion-exchange HPLC. As a test case, all 10 DNA hexamers of the sequence CGCGCG containing a single phosphoroselenoate linkage (PSe) were prepared. Crystals were grown for a subset of them, and the structure of [d(C{sub PSe}GCGCG)]{sub 2} was determined by the multiwavelength anomalous dispersion technique and refined to 1.1 {angstrom} resolution.

43 PARTICLE ACCELERATORS↗

The Influence of C(sp 3 )H–Selenium Interactions on the 77 Se NMR Quantification of the π‐Accepting Properties of Carbenes

Abstract Selenium NMR has become a standard tool for scaling the π‐accepting character of carbenes. Herein, we highlight that non‐classical hydrogen bonding (NCHB), likely resulting from hyperconjugation, can play a significant role in the carbene–selenium 77 Se NMR chemical shift, thus triggering a non‐linear behavior of the Se‐Scale.

Junor, Glen P.↗

The Influence of C(sp 3 )H–Selenium Interactions on the 77 Se NMR Quantification of the π-Accepting Properties of Carbenes

Selenium NMR has become a standard tool for scaling the p-accepting character of carbenes. Herein, we highlight that non-classical hydrogen bonding (NCHB), likely resulting from hyperconjugation, can play a significant role in the carbene–selenium 77 Se NMR chemical shift, thus triggering a non-linear behavior of the Se-Scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilization and transformation of selenium during the Fe(II)-induced transformation of Se(IV)-adsorbed ferrihydrite under anaerobic conditions

Selenium (Se) is an essential nutrient for human beings at trace concentrations, but also a hazardous contaminant at high concentrations. As an important geological adsorbent, the transformation of 2-line ferrihydrite (Fh) strongly influences the geochemical behavior of selenium. However, little is known about the effect of the recrystallization of Fh on the fate of adsorbed Se(IV) in the reducing environments. We investigated the redistribution and transformation of Se(IV) during the recrystallization of Se(IV)-adsorbed Fh accelerated by Fe(II) under anaerobic conditions. Synchrotron based X-ray absorption near edge structure (XANES) spectroscopy was utilized to characterize oxidation state of Se. Results revealed that the adsorbed Se(IV) inhibited the Fe(II)-catalyzed recrystallization of ferrihydrite to goethite. Transmission electron microscopy (TEM) images showed that pH and the presence of Se(IV) had significant impacts on the morphology of the produced goethite. Approximately 30–75% adsorbed Se(IV) transformed to phosphate-unextractable form, indicating that the adsorbed Se transformed to more stable phase during the recrystallization of Fh. The XANES results indicated that a small fraction of Se(IV) was reduced to elemental Se. Our study demonstrated that the stability of adsorbed Se(IV) on ferrihydrite could be enhanced during Fe(II)-catalytic transformation of Fh under anoxic environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comprehensive material study of CdSeTe films deposited with differing selenium compositions

The addition of selenium into CdTe to create the ternary alloy CdSeTe has been one of the most impactful advancements to CdTe-based photovoltaics in the last decade. CdSeTe/CdTe bilayer device structures have enabled a gain in short-circuit current due to the narrower bandgap of the alloy, with minimal to no loss in voltage. Intensity of photoluminescence and time-resolved photoluminescence measurements suggest this is due to an increase in carrier lifetime and concomitant greater fraction of radiative vs non-radiative recombination events which allows for a reduction in the voltage deficit. Here, in this work, we study the properties of as-deposited and CdCl 2 -treated CdSeTe films deposited by close-space sublimation under varying conditions from CdSeTe source charges with both 20 and 40 mol% CdSe. We find that the selenium content in the deposited films are substantially reduced from that of the source material. Additionally, deposition temperature, particularly that of the substrate, considerably affects the grain size, crystallinity, and photoluminescence of the material, illustrating the importance of source material selection and process optimization. Finally, we present evidence that the source material, and therefore the properties of the deposited films, change over time as the source material is used.

36 MATERIALS SCIENCE↗

Review of Multifunctional Separators: Stabilizing the Cathode and the Anode for Alkali (Li, Na, and K) Metal–Sulfur and Selenium Batteries

Alkali metal batteries based on lithium, sodium, and potassium anodes and sulfur-based cathodes are regarded as key for next-generation energy storage due to their high theoretical energy and potential cost effectiveness. However, metal–sulfur batteries remain challenged by several factors, including polysulfides’ (PSs) dissolution, sluggish sulfur redox kinetics at the cathode, and metallic dendrite growth at the anode. Functional separators and interlayers are an innovative approach to remedying these drawbacks. Here we critically review the state-of-the-art in separators/interlayers for cathode and anode protection, covering the Li–S and the emerging Na–S and K–S systems. The approaches for improving electrochemical performance may be categorized as one or a combination of the following: Immobilization of polysulfides (cathode); catalyzing sulfur redox kinetics (cathode); introduction of protective layers to serve as an artificial solid electrolyte interphase (SEI) (anode); and combined improvement in electrolyte wetting and homogenization of ion flux (anode and cathode). It is demonstrated that while the advances in Li–S are relatively mature, less progress has been made with Na–S and K–S due to the more challenging redox chemistry at the cathode and increased electrochemical instability at the anode. Throughout these sections there is a complementary discussion of functional separators for emerging alkali metal systems based on metal–selenium and the metal–selenium sulfide. The focus then shifts to interlayers and artificial SEI/cathode electrolyte interphase (CEI) layers employed to stabilize solid-state electrolytes (SSEs) in metal–sulfur solid-state batteries (SSBs). The discussion of SSEs focuses on inorganic electrolytes based on Li- and Na-based oxides and sulfides but also touches on some hybrid systems with an inorganic matrix and a minority polymer phase. The review then moves to practical considerations for functional separators, including scaleup issues and Li–S technoeconomics. The review concludes with an outlook section, where we discuss emerging mechanics, spectroscopy, and advanced electron microscopy (e.g. cryo-transmission electron microscopy (cryo-TEM) and cryo-focused ion beam (cryo-FIB))-based approaches for analysis of functional separator structure–battery electrochemical performance interrelations. Finally, throughout the review we identify the outstanding open scientific and technological questions while providing recommendations for future research topics.

25 ENERGY STORAGE↗

Controlled Synthesis of Sulfur-Rich Polymeric Selenium Sulfides as Promising Electrode Materials for Long-Life, High-Rate Lithium Metal Batteries

High-energy lithium/sulfur (Li/S) batteries still suffer from unsatisfactory cycle life and poor rate capability caused by the polysulfides shuttle and insulating nature of S cathodes. Here, we report our findings in the controlled synthesis of selenium (Se)-containing S-rich co-polymers of various compositions as novel cathode materials through a facile inverse vulcanization of S with selenium disulfide (SeS2) and 1,3- diisopropenylbenzene (DIB) as co-monomers. Nuclear magnetic resonance and X-ray photoelectron spectroscopy results show that divinyl functional groups of DIB were chemically cross-linked with S/SeS2 chain radicals through a ring-opening polymerization. The newly formed bonds of C-S, C-Se, and S-Se in novel S-SeS2-DIB copolymers effectively alleviate the shuttle effects of polysulfides/polyselenides. Furthermore, various electrochemical techniques confirm the positive roles of Secontaining co-polymers in enhancing the electrode reaction kinetics and the formation of stable solid electrolyte interphase layer with low charge-transfer resistance, leading to improved high-rate performances. The as-synthesized co-polymer was then infiltrated into well-interconnected, porous nanocarbon networks (Ketjenblack EC600JD, KB600) to provide effective paths for the fast electron transport. Due to the synergistic combination of chemical and physical confinement of the reaction intermediates during cycling, good reversibility for 500 cycles with a low decay rate of 0.0549% per cycle was achieved at 1000 mA g-1. These encouraging results suggest that the combination of chemical incorporation of SeS2 into S-rich co-polymer and the physical confinement of carbon networks is a promising strategy for advancing Li/S batteries and their viability for practical applications.

Dong, Panpan↗

Band Gap Engineering and Layer-by-Layer Band Gap Mapping of Selenium-doped Molybdenum Disulfide

Ternary two-dimensional dichalcogenide alloys exhibit compositionally modulated electronic structure and hence, control of dopant concentration within each layer of these layered compounds provides a powerful way to modify their properties. The challenge then becomes quantifying and locating the dopant atoms within each layer in order to better understand and fine-tune the desired properties. Here we report the synthesis of selenium substitutionally doped molybdenum disulfide atomic layers, with a broad range of selenium concentrations, resulting in band gap modulations of over 0.2 eV. Atomic scale chemical analysis using Z-contrast imaging provides direct maps of the dopant atom distribution in individual MoS2 layers and hence a measure of the local band gaps. Furthermore, in a bilayer structure, the dopant distribution of each layer is imaged independently. We demonstrate that each layer in the bilayer contains similar doping levels, randomly distributed, providing new insights into the growth mechanism and alloying behavior in two-dimensional dichalcogenide atomic layers. The results show that growth of uniform, ternary, two-dimensional dichalcogenide alloy films with tunable electronic properties is feasible.

Gong, Yongji↗

Reversible electrochemical conversion from selenium to cuprous selenide

Using elemental selenium as an electrode, the redox-active Cu 2+ /Cu + ion is reversibly hosted via the sequential conversion reactions of Se → CuSe → Cu 3 Se 2 → Cu 2 Se. Here, the four-electron redox process from Se to Cu 2 Se produces a high initial specific capacity of 1233 mA h g –1 based on the mass of selenium alone or 472 mA h g –1 based on the mass of Cu 2 Se, the fully discharged product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Triaxiality in selenium-76

Background: Selenium and germanium nuclei are associated with both triaxiality and shape coexistence. The relative influence of these deformation effects on the low-lying nuclear structure remains the subject of much discussion with additional attention drawn to 76 Se and 76 Ge due to the potential for the observation of neutrinoless double- β decay. Purpose: Experimental observables related to the deformation of 76 Se are lacking in precision. The purpose of the present paper is to provide electric quadrupole matrix elements with improved precision in order to determine the deformation of low-lying states in a model-independent manner. Methods: Sub-barrier Coulomb excitation was employed at the reaccelerated beam facility of the National Superconducting Cyclotron Laboratory using the JANUS setup. Using this method nineteen E2 matrix elements were extracted. Results: Extracted matrix elements agree within uncertainties with those in the literature but with improved precision. Through both a comparison with geometric models and a model-independent evaluation of E2 matrix elements using rotational invariants, the ground state of 76 Se is best described as having a significant triaxial component, but is not maximally triaxially deformed. Conclusions: Selenium-76 exhibits a significant degree of triaxiality in its ground state. Finally, a detailed comparison with configuration-interaction calculations indicates that this can be well reproduced theoretically.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Localizing the Shape Transition in Neutron-Deficient Selenium

Neutron-deficient selenium isotopes are thought to undergo a rapid shape change from a prolate deformation near the line of beta stability towards oblate deformation around the line of $N=Z$. The point at which this shape change occurs is unknown, with inconsistent predictions from available theoretical models. A common feature in the models is the delicate nature of the point of transition, with the introduction of even a modest spin to the system sufficient to change the ordering of the prolate and oblate configurations. In this paper, we present a measurement of the quadrupole moment of the first-excited state in radioactive $^{72}\mathrm{Se}$—a potential point of transition—by safe Coulomb excitation. This is the first low-energy Coulomb excitation to be performed with a rare-isotope beam at the reaccelerated beam facility at the National Superconducting Cyclotron Laboratory. Finally, by demonstrating a negative spectroscopic quadrupole moment for the first-excited ${2}^{+}$ state, it is found that any low-spin shape change in neutron-deficient selenium does not occur until $^{70}\mathrm{Se}$.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Genome-Wide Effects of Selenium and Translational Uncoupling on Transcription in the Termite Gut Symbiont Treponema primitia

When prokaryotic cells acquire mutations, encounter translation-inhibiting substances, or experience adverse environmental conditions that limit their ability to synthesize proteins, transcription can become uncoupled from translation. Such uncoupling is known to suppress transcription of protein-encoding genes in bacteria. Here we show that the trace element selenium controls transcription of the gene for the selenocysteine-utilizing enzyme formate dehydrogenase (fdhF Sec ) through a translation-coupled mechanism in the termite gut symbiont Treponema primitia, a member of the bacterial phylum Spirochaetes. We also evaluated changes in genome-wide transcriptional patterns caused by selenium limitation and by generally uncoupling translation from transcription via antibiotic-mediated inhibition of protein synthesis. We observed that inhibiting protein synthesis in T. primitia influences transcriptional patterns in unexpected ways. In addition to suppressing transcription of certain genes, the expected consequence of inhibiting protein synthesis, we found numerous examples in which transcription of genes and operons is truncated far downstream from putative promoters, is unchanged, or is even stimulated overall. These results indicate that gene regulation in bacteria allows for specific post-initiation transcriptional responses during periods of limited protein synthesis, which may depend both on translational coupling and on unclassified intrinsic elements of protein-encoding genes.

59 BASIC BIOLOGICAL SCIENCES↗