SEARCH · Search NASA

Results for “single-mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Fiber-linked telescope arrays on the ground and in space

The use of single-mode optical fibers in telescope arrays, first proposed for a set of free-flying spacecraft, is developed and applied to more modest, shorter range projects. The basic advantage remains a considerable simplification in the control system; the main limitation is spectral range. Two proposals are described: a ground-based array of small optical telescopes supported on a radio dish, and a similar space array. The control system is almost the same in both cases, hence the ground-based array can be considered a test-bench for the space device.

Connes, P.↗

NASA NTRS1988

Low-loss, high-isolation, fiber-optic isolator

A low-loss, high-isolation, fiber-optic isolator for use in single-mode fiber systems utilizes a Faraday rotator and two polarizers, one at each end angularly oriented from each other at the angle of rotation for isolation, and two aspheric lens connectors to couple optical fibers to the Faraday isolator to reduce forward loss to about 2.5 dB and improve isolation to greater than 70 dB.

Lutes, George F.↗

NASA NTRS1986

Overview of advanced components for fiber optic systems

The basic operating principles and potential performance of several state-of-the-art fiber-optic devices are illustrated with diagrams and briefly characterized. Technologies examined include high-birefringence polarization-maintaining fibers and directional couplers, single-mode fiber polarizers and cut-off polarizers, optical-fiber modulators with radially poled piezoactive polymer (PVF2) jackets, and piezoelectric-squeezer polarization modulators. The need for improved manufacturing techniques to make such fiber-optic devices cost-competitive with their thin-film integrated-optics analogs is indicated.

Depaula, Ramon P.↗

NASA NTRS1986

1.3-micron all-fiber passive optical rotation sensor

An all-fiber, 1.3-micron passive optical rotation sensor utilizing 4.2 km of single-mode fiber and synchronous detection has been constructed and tested in the laboratory. rms noise-equivalent rotation rates of 0.005 deg/hr have been measured. Drift and scale-factor variations resulted in a change in the indicated rotation rate of 0.4 deg/hr over a 1-hr time period.

Youmans, Bruce R.↗

NASA NTRS1987

Deformation of the core-mantle boundary induced by spherical-shell, compressible convection

Single-mode, mean-field equations, for spherical-shell convection are derived, with variable viscosity and compressibility included. Core-mantle boundary (CMB) topography produced by whole mantle convection is computed for various rheologies and different thermal boundary conditions at CMB. Results for long-wavelength undulations show the extreme sensitivity of these signatures to rheological and equation of state parameters. In order to obtain excess ellipticity of about 1 km, the activation energy and volume in the lower mantle should be low, and the temperatures at CMB should be around 4500 K, in accord with recent experimental findings.

Zhang, Shuxia↗

NASA NTRS1987

A finite element large deflection random response analysis of beams and plates subjected to acoustic loading

A finite element formulation is presented for the analysis of beams and rectangular plates undergoing large deflections subjected to Gaussian white noise excitations. Single-mode response is assumed in the present formulation. Root-mean-square (RMS) maximum deflections for simply supported and clamped beams and plates at various sound spectrum levels are obtained and compared with solutions using the Fokker-Planck-Kolmogorov equation and the equivalent linearization methods. RMS maximum stains and equivalent linear frequencies are compared with the equivalent linearization results for assessment of the accuracy of the finite element method.

Mei, Chuh↗

NASA NTRS1987

Optical bistability in self-pumped phase-conjugate ring resonators

Bistable oscillations have been observed in BaTiO3 pumped by a single-mode 30-mW (488-nm) argon-ion laser, which is used simultaneously as a ring passive phase conjugator (RPPC) and as a unidirectional ring resonator (UDRR). Strong oscillations in the UDRR increase the threshold coupling strength required for oscillation in the RPPC. The oscillations in the RPPC reduce the fanning in the crystal necessary for the startup of oscillation in the UDRR. Auxiliary resonators pumped by the RPPC are also bistable with the UDRR. Similar bistable oscillations have been observed when the crystal is used simultaneously as a RPPC and as a linear passive phase conjugator.

Jagannath, H.↗

NASA NTRS1987

Fiber optic and laser sensors IV; Proceedings of the Meeting, Cambridge, MA, Sept. 22-24, 1986

The conference presents papers on industrial uses of fiber optic sensors, point and distributed polarimetric optical fiber sensors, fiber optic electric field sensor technology, micromachined resonant structures, single-mode fibers for sensing applications, and measurement techniques for magnetic field gradient detection. Consideration is also given to electric field meter and temperature measurement techniques for the power industry, the calibration of high-temperature fiber-optic microbend pressure transducers, and interferometric sensors for dc measurands. Other topics include the recognition of colors and collision avoidance in robotics using optical fiber sensors, the loss compensation of intensity-modulating fiber-optic sensors, and an embedded optical fiber strain tensor for composite structure applications.

De Paula, Ramon P.↗

NASA NTRS1988

Nonlinear evolution of longitudinal plasma waves

Long-time nonlinear behavior of single-mode longitudinal plasma waves is studied on the basis of the Vlasov equation with Fokker-Planck collision terms. The resonant layer, trapped island, collisional sublayers, and X-point neighborhoods are analyzed. A nonlinear evolution equation is obtained and the wave-generated current is also evaluated.

Pao, Young-Ping↗

NASA NTRS1987

Standard, multipurpose fiber optic transceivers (MFOX)

The MFOX family of standardized fiber-optic communications modules developed for the USAF is described. The MFOX transceivers are designed to operate at wavelength 1.3 microns under severe environmental conditions; their compact subhybrid construction and flexible electronic interfaces permit multiple applications and mountings. The family comprises five performance levels: (1) 1-10,000-kb/s digital and (2) 0.2-50 Mb/s digital using LEDs, (3) up to 10-MHz-bandwidth analog using modulator/demodulators with level (2) transceivers, (4) 0.2-400-Mb/s digital and 70-MHz IF analog using multimode lasers, and (5) 200-1000-Mb/s digital using a single-mode laser; levels (4) and (5) are currently in the experimental stage. Drawings, diagrams, graphs, and tables of physical and optical specifications are provided.

Hunter, James R.↗

NASA NTRS1988

Bistable direction switching in an off-axis pumped continuous wave ruby laser

A report is presented of the observation of hysteretic bistable direction switching in a single-mode CW ruby laser system. This effect is only observed when the pump beam which is focused into the ruby rod is misaligned with respect to the rod end faces. At low pump powers, the ruby lases in a mode nearly collinear with the pump axis. At a higher pump power the ruby switches to a mode that is collinear with the rod end faces and preserves the original polarization. The effect is large enough to switch the beam by an angle equal to twice the diffraction angle. The observations show that under steady-state pumping, a CW ruby laser can exhibit bistable operation in its output direction and power. A calculation using the heat equation with two concentric cylinders with one as a heat source (pump laser) and the outer wall of the other held at 77 K, gives an increase in core temperature of about 0.01 K. Therefore, the increase in temperature is not large enough to change the index of refraction to account for such large macroscopic effects.

Afzal, R. Sohrab↗

NASA NTRS1988

High-power 0.87-micron channel substrate planar lasers for spaceborne communications

High-power single-mode channeled-substrate planar AlGaAs diode lasers are being developed for reliable high-power operation for use as sources in spaceborne optical communication systems. The CSP laser structure has been optimized for operation at an emission wavelength of 870 nm. Such devices have exhibited output powers in excess of 80 mW CW at an operating temperature of 80 C.

Connolly, J. C.↗

NASA NTRS1988

Gaussian approximation versus nearly exact performance analysis of optical communication systems with PPM signaling and APD receivers

A 25-Mb/s direct-detection optical communication system that used Q = 4 PPM (pulse-position modulation) signaling was constructed and its performance measured under laboratory conditions. The system used a single-mode AlGaAs laser diode (lambda = 834 nm) and low-noise silicon avalanche photodiode (APD). A procedure for numerically computing system performance is given that uses the nearly exact Webb approximation of the true Conradi distribution for the APD output and does not require excessive amounts of computer time. Comparison revealed that modeling the APD ouptut as a Gaussian process under conditions of negligible background radiation and low (less than 10 to the -12 A) APD bulk leakage currents leads to substantial underestimates of optimal APD gain and overestimates of system bit error probability. Examples illustrate the breakdown of the Gaussian approximation in assessing system performance. The measured performance was in excellent agreement with that predicted by the computational procedure. The system achieved a bit error probability of 10 to the -6 at a received signal energy, corresponding to an average of 60 absorbed photons/bit and optimal APD gain of 700.

Davidson, Frederic M.↗

NASA NTRS1988

Efficient monolithic MgO:LiNbO3 singly resonant optical parametric oscillator

A monolithic MgO:LiNbO3 singly resonant optical parametric oscillator (OPO) was operated as both a standing-wave and a ring-geometry resonator. The OPO was pumped by the second harmonic of an amplified single-mode diode-laser-pumped Nd:YAG laser. Pump depletions of greater than 60 percent were observed when pumping four times greater than the 35-W threshold. The OPO output at the resonant signal tuned with temperature from 834 to 958 nm, while the corresponding idler tuned from 1.47 to 1.2 microns. The spectral characteristics of the OPO signal output and the relative merits of a standing wave versus a ring geometry are discussed.

Kozlovsky, W. J.↗

NASA NTRS1988

OPO performance with a long pulse length, single frequency Nd:YAG laser pump

With the advent of new nonlinear materials and single-frequency pump sources, there is renewed interest in optical parametric oscillators (OPOs). A single-mode diode-laser-pumped monolithic Nd:YAG nonplanar ring laser that is both amplified and frequency doubled is used to pump a monolithic MgO:LiNbO3 pulsed singly resonant OPO. The OPO signal output was temperature tuned from 834 to 958 nm, producing an idler tuning from 1.47 to 1.2 microns. Efforts toward a CW all-solid-state doubly resonant OPO are also described.

Kozlovsky, W. J.↗

NASA NTRS1985

The effects of wavelength on coherent Doppler lidar performance

Hitherto, long-range wind-sensing coherent (heterodyne) lidars have utilized CO2 lasers (operating at a 10-micrometer wavelength) since these were the only high-power single-mode (spatial and axial) pulsed sources available. This property ensures temporal coherence over the required spatial resolution, e.g., the pulse length. Recent developments in Nd:YAG lasers makes possible the consideration of a 1.06-micrometer source (Kane et al., 1984). The relative merit of operation at various wavelengths is a function of system parameter, backscattering cross section, signal processing, beam propagation, and practical and eye safety considerations. These factors are discussed in the context of a global wind-sensing coherent lidar.

Lawrence, T. R.↗

DOE OSTI2026

Embedding Fiber Optic Sensors in Stainless Steel using Spark Plasma Sintering for Structural Health Monitoring in Harsh Environments

Embedded fiber optic sensors such as fiber Bragg gratings (FBGs) offer a unique route for distributed real-time in-situ imaging of various engineering parameters for numerous purposes. This study advanced the current sensor embedding approaches by exploring a spark plasma sintering (SPS)-assisted technology to embed FBGs in high-temperature structural materials and demonstrated the capability of temperature measurement. In this approach, single-mode FBGs were integrated into stainless steel (SS) 316L components using SPS, followed by the evaluation of the bonding quality between the FBGs and matrix, the optical attenuation of the fibers induced by embedding, and the sensing characters of the FBGs under temperature stimuli. The results demonstrated that superior bonding was achieved between the FBGs and highly-densified SS316L. Examination of the behavior of Bragg gratings validated signal fidelity after embedding. Real-time thermal imaging under temperature cycling using the FBGs demonstrated the effectiveness of the technique for smart materials manufacturing.

36 - MATERIALS SCIENCE↗

DOE OSTI2026

Entanglement Requirements for Coherent Enhancement in Detectors

Coherent enhancement is a powerful mechanism for improving the sensitivity of a wide range of detectors, but its practical use is often limited by the difficulty of preparing the required quantum states. We show that this difficulty has a fundamental origin: coherent enhancement of a signal interacting with a detector is quantitatively constrained by entanglement. We prove general bounds on how the strength of coherent effects can scale with system size, as a function of the single-mode entanglement entropy of the detector. These bounds smoothly interpolate between the incoherent and fully coherent regimes, and apply both to parameter-estimation problems and to scattering processes. We discuss these results from two complementary perspectives: First, they appear as bounds on the quantum Fisher information of many-body states, which translate directly into limits on parameter sensitivity via the quantum Cramér-Rao bound. Second, they can be interpreted as limits on a class of scattering cross sections, leading to predictions for how minimum detectable interaction strengths scale with target size. Together, these results provide a unified view of coherent enhancement in metrology and scattering experiments, and motivate the development of new techniques for generating entangled detector states.

Bogorad, Zachary [Fermilab] (ORCID:000000019913647↗