SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The author has identified the following significant results. The spring small grain proportion accuracy in 15 Saskatchewan test sites was found to be comparable to that of the Large Area Crop Inventory Experiment Phase 3 and Transition Year results in the U.S. spring wheat states. Spring small grain labeling accuracy was 94%, and the direct wheat labeling accuracy was 89%, despite the low barley separation accuracy of 30%.
The purpose is to investigate and demonstrate equipment and techniques proposed for minor surgery on Space Station Freedom (SSF). The objectives are: (1) to test and evaluate methods of surgical instrument packaging and deployment; (2) to test and evaluate methods of surgical site preparation and draping; (3) to evaluate techniques of sterile procedure and maintaining sterile field; (4) to evaluate methods of trash management during medical/surgical procedures; and (4) to gain experience in techniques for performing surgery in microgravity. A KC-135 parabolic flight test was performed on March 30, 1990 with the goal of investigating and demonstrating surgical equipment and techniques under consideration for use on SSF. The flight followed the standard 40 parabola profile with 20 to 25 seconds of near-zero gravity in each parabola.
One of the greatest unresolved issues concerns the evolution of Mars early in its history; during the time period that accretion was winding down but the frequency of impacting debris was still heavy. Ancient cratered terrain that has only been moderately modified since the period of heavy bombardment covers about a quarter of the planet's surface but the environment during its formation is still uncertain. This terrain was dominantly formed by cratering. But unlike on the airless Moon, the impacting craters were strongly modified by other contemporary surface processes that have produced distinctive features such as 1) dendritic channel networks, 2) rimless, flatfloored craters, 3) obliteration of most craters smaller than a few kilometers in diameter (except for post heavy-bombardment impacts), and 4) smooth intercrater plains. The involvement of water in these modification processes seems unavoidable, but interpretations of the surface conditions on early Mars range from the extremes of 1) the "cold" model which envisions a thin atmosphere and surface temperatures below freezing except for local hydrothermal springs; and 2) the "warm" model, which invokes a thick atmosphere, seasonal temperatures above freezing in temperate and equatorial regions, and at least occasional precipitation as part of an active hydrological cycle. The nature of hydrologic cycles, if they occurred on Mars, would have been critically dependent on the environment. The resolution of where along this spectrum the actual environment of early Mars occurred is clearly a major issue, particularly because the alternate scenarios have much different implications about the possibility that life might have evolved on Mars.
Explore the source record for details and available documents.
Sea-salt aerosol global models are typically evaluated against concentration observations at coastal stations that are unaffected by local surf conditions and thus considered representative of open ocean conditions. Despite recent improvements in sea-salt source functions, studies still show significant model errors in specific regions. Using a multiscale model, we investigated the effect of high model resolution (0.1deg x 0.1deg vs. 1deg x 1.4deg) upon sea-salt patterns in four stations from the University of Miami Network: Baring Head, Chatam Island, and Invercargill in New Zealand, and Marion Island in the sub-antarctic Indian Ocean. Normalized biases improved from +63.7% to +3.3% and correlation increased from 0.52 to 0.84. The representation of sea/land interfaces, mesoscale circulations, and precipitation with the higher resolution model played a major role in the simulation of annual concentration trends. Our results recommend caution when comparing or constraining global models using surface concentration observations from coastal stations.
Landsat-4 image data quality was evaluated for test sites in Iowa and Illinois. Radiometric and geometric quality was tested and an applications evaluation was carried out using a cooling-pond thermal-mapping example. Geometric quality was found to be generally very good. Small errors were found in registration of the middle IR bands of the TM and the thermal IR band was found to be misregistered by one 120-meter pixel. Radiometric quality of the TM is excellent with only minor striping effects.
Remote sensing-based evapotranspiration (ET) products have been evaluated primarily using data from northern middle latitudes; therefore, little is known about their performance at low latitudes. To address this bias, an evaluation dataset was compiled using eddy covariance data from 40 sites between latitudes 30° S and 30° N. The flux data were obtained from the emerging network in Mexico (MexFlux) and from openly available databases of FLUXNET, AsiaFlux, and OzFlux. This unique reference dataset was then used to evaluate remote sensing-based ET products in environments that have been underrepresented in earlier studies. The evaluated products were: MODIS ET (MOD16, both the discontinued collection 5 (C5) and the latest collection (C6)), Global Land Evaporation Amsterdam Model (GLEAM) ET, and Atmosphere-Land Exchange Inverse (ALEXI) ET. Products were compared with unadjusted fluxes (ETorig) and with fluxes corrected for the lack of energy balance closure (ETebc). Three common statistical metrics were used: coefficient of determination (R2), root mean square error (RMSE), and percent bias (PBIAS). The effect of a vegetation mismatch between pixel and site on product evaluation results was investigated by examining the relationship between the statistical metrics and product-specific vegetation match indexes. Evaluation results of this study and those published in the literature were used to examine the performance of the products across latitudes. Differences between the MOD16 collection 5 and 6 datasets were generally smaller than differences with the other products. Performance and ranking of the evaluated products depended on whether ETorig or ETebc was used. When using ETorig, GLEAM generally had the highest R2, smallest PBIAS, and best RMSE values across the studied land cover types and climate zones. Neither MOD16 nor ALEXI performed consistently better than the other. When using ETebc, none of the products stood out in terms of both low bias and strong correlations. The use of ETebc instead of ETorig affected the biases more than the correlations. The product evaluation results showed no significant relationship with the degree of match between the vegetation at the pixel and site scale. The latitudinal comparison showed tendencies of lower R2 (all products) but better PBIAS and normalized RMSE values (MOD16 and GLEAM) for forests at low latitudes than for forests at northern middle latitudes. For non-forest vegetation, the products showed no clear latitudinal differences in performance.
The Raman shifted return of a lidar, or optical radar, system has been utilized to make atmospheric temperature measurements. These measurements were made along a horizontal path at temperatures between -20 C and +30 C and at ranges of about 100 meters. The temperature data were acquired by recording the intensity ratio of two portions of the Raman spectrum which were simultaneously sampled from a preset range. The lidar unit employed in this testing consisted of a 4 joule-10ppm laser operating at 694.3 nm, a 10-inch Schmidt-Cassegrain telescope, and a system of time-gated detection and signal processing electronics. The detection system processed three return signal wavelength intervals - two intervals along the rotational Raman scattered spectrum and one interval centered at the Rayleigh-Mie scattered wavelength. The wavelength intervals were resolved by using a pellicle beam splitter and three optical interference filters. Raman return samples were taken from one discrete range segment during each test shot and the signal intensities were displayed in digital format. The Rayleigh-Mie techniques. The test site utilized to evaluate this measurement technique encompassed a total path length of 200 meters. Major components of the test site included a trailer-van housing the lidar unit, a controlled environment test zone, and a beam terminator. The control zone which was located about 100 meters from the trailer was 12 meters in length, 2.4 meters in diameter, and was equipped with hinged doors at each end. The temperature of the air inside the zone could be either raised or lowered with respect to ambient air through the use of infrared heaters or a liquid-nitrogen cooling system. Conditions inside the zone were continuously monitored with a thermocouple rake assembly. The test path length was terminated by a 1.2 meter square array of energy absorbing cones and a flat black screen. Tests were initially conducted at strictly ambient conditions utilizing the normal outside air temperatures as a test parameter. These tests provided a calibration of the Raman intensity ratio as a function of' temperature for the particular optical-filter arrangement used in this system while also providing a test of' the theoretical prediction formulated in the design of the system. Later tests utilized zone temperatures above and below ambient to provide temperature gradient data. These tests indicate that ten shots, or one minute of' data acquisition, from a 100 meter range can provide absolute temperature measurements with an accuracy of + 30 C and a range resolution of about 5 meters. Because this measurement accuracy compares well with that predicted for this particular unit, it is suggested that a field-application system could be built with signif'icant improvements in both absolute accuracy and range.
The Soil Moisture Active/Passive satellite was launched in 2015 to provide global and continuous maps of land surface soil moisture and freeze-thaw using L-Band microwave radiometry. Even though the 1400-1427 MHz frequency used by SMAP is a protected portion of the spectrum, Radio Frequency Interference (RFI) is still observed that can corrupt the radiometer’s measurements. Nine distinct algorithms are implemented as part of SMAP’s level 1 processing to detect and filter out RFI contributions. However, any remaining undetected RFI are major concern especially at the locations of cal/val sites used for evaluating soil moisture retrieval performance. This paper presents an analysis of the RFI environment at SMAP cal/val site locations and assesses the impact of RFI on soil moisture retrievals at those locations.
Imagery of the Atlantic shoreline zone of the Central Atlantic Regional Ecological Test Site (CARETS) was evaluated for classifying land use and land cover, employing the USGS Geographic Application Program's land use classification system. ERTS data can provide a basis for land cover and land use mapping within the shoreline zone, however because of the dynamic nature of this environment, two additional terms are considered: vulnerability of classes to storms and progressive erosion, and sensitivity of the classes to man's activities.
The author has identified the following significant results. S192 data collected on 5 August 1973 were processed by computer to produce a classification map of a part of the Gratiot-Saginaw State Game Area in south central Michigan. A 10-category map was prepared of an area consisting of diverse terrain types, including forests, wetlands, brush, and herbaceous vegetation. An accuracy check indicated that 54% of the pixels were correctly recognized. When these ten scene classes were consolidated to a 5-category map, the accuracy increased to 72%. S190 A, S190 B, and S192 data can be used for regional surveys of existing and potential recreation sites, for delineation of open space, and for preliminary evaluation of geographically extensive sites.
The planning process for a statewide reclamation plan of Ohio abandoned minelands in response to the Federal Surface Mining Control and Reclamation Act of 1977 included: (1) the development of a screening and ranking methodology; (2) the establishment of a statewide review of major watersheds affected by mining; (3) the development of an immediate action process; and (4) a prototypical study of a priority watershed demonstrating the data collection, analysis, display and evaluation to be used for the remaining state watersheds. Historical methods for satisfying map information analysis and evaluation, as well as current methodologies being used were discussed. Various computer mapping and analysis programs were examined for their usability in evaluating the priority reclamation sites. Hand methods were chosen over automated procedures; intuitive evaluation was the primary reason.
In August, 1991, needle and branch samples of Siberian fir were collected from undisturbed forest stands along an elevation gradient ranging from 2300 ft to 4450 ft. Four study sites were selected on west-facing slopes, and a standard set of measurements and collections was made. First-, second-, and third-year needles were collected for anatomical assessment. A visual assessment of the forest stand conditions at each site included an evaluation of canopy morphology needle, coloration, increment growth, and the state of health of a specific type of lichen. The heaviest damage to forest stands (extensive foliar loss, needle discoloration, dieback of terminal growth) occurs at an intermediate elevation site (3400 ft/1037 m). The least amount of damage was recorded at the lowest elevation site (2300 ft/701 m). Only slight damage occurs at the highest elevation site (4450 ft/1357 m). Some degree of flagging occurs at all sites. Several lines of evidence suggest that the damage occurring in this area is recent in origin (incipient).
Explore the source record for details and available documents.
Detailed measurements of the mean flow and turbulence were made with the use of a micrometeorological facility consisting of an instrumented 76-m tall tower located within a 100-m distance from the Atlantic Ocean at Wallops Island, Virginia. Under moderately strong wind conditions, the popular neutral boundary layer flow model fails to provide an adequate description of the actual flow. In addition to detailed flow information for all wind directions, averages of the important flow parameters used for design such as vertical distribution of mean velocity, turbulence intensities and turbulence integral scales were presented for wind direction sectors with near uniform upstream terrain. Power spectra of the three velocity components for the prevailing northwesterly and southerly winds are discussed.
During the 1995 Mars opposition, Earth-based radars had a favorable angle for viewing many of the possible landing sites for Mars Pathfinder. The Goldstone 70-m antenna was used at X-band (3.5 cm) to get a measure of roughness to nearly that size.
For two test sites in Pennsylvania the interpretability of commercially acquired low-altitude and existing high-altitude aerial photography are documented in terms of time, costs, and accuracy for Anderson Level II land use/land cover mapping. Information extracted from the imagery is to be used in the evaluation process for siting energy facilities. Land use/land cover maps were drawn at 1:24,000 scale using commercially flown color infrared photography obtained from the United States Geological Surveys' EROS Data Center. Detailed accuracy assessment of the maps generated by manual image analysis was accomplished employing a stratified unaligned adequate class representation. Both 'area-weighted' and 'by-class' accuracies were documented and field-verified. A discrepancy map was also drawn to illustrate differences in classifications between the two map scales. Results show that the 1:24,000 scale map set was more accurate (99% to 94% area-weighted) than the 1:62,500 scale set, especially when sampled by class (96% to 66%). The 1:24,000 scale maps were also more time-consuming and costly to produce, due mainly to higher image acquisition costs.
A method of field registration verification for 20 SEA/AR sites for the 1979 crop year is evaluated. Field delineations for the sites were entered into the data base, and their registration verified using single channel gray scale computer printout maps of LANDSAT data taken over the site.