Search NASA⌕ Search

SEARCH · Search NASA

Results for “solar thermochemical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Design Evaluation of a Next-Generation High-Temperature Particle Receiver for Concentrating Solar Thermal Applications

High-temperature particle receivers are being developed to achieve temperatures in excess of 700 °C for advanced power cycles and solar thermochemical processes. This paper describes designs and features of a falling particle receiver system that has been evaluated and tested at the National Solar Thermal Test Facility at Sandia National Laboratories. These advanced designs are intended to reduce heat losses and increase the thermal efficiency. Novel features include aperture covers, active air flow, particle flow obstructions, and optimized receiver shapes that minimize advective heat losses, increase particle curtain opacity and uniformity, and reduce cavity wall temperatures. Control systems are implemented in recent on-sun tests to maintain a desired particle outlet temperature using an automated closed-loop proportional–integral–derivative controller. These tests demonstrate the ability to achieve and maintain particle outlet temperatures approaching 800 °C with efficiencies between 60 and 90%, depending on incident power, mass flow, and environmental conditions. Lessons learned regarding the testing of design features and overall receiver operation are also presented.

Mills, Brantley H.↗
DOE OSTI2022

A thermochemical study of iron aluminate-based materials: a preferred class for isothermal water splitting

The use of hydrogen as a renewable fuel has been stymied by our inability to produce it cleanly and economically. The conventional solar thermochemical approach considers a two-step redox cycle with benchmark ceria or a perovskite in a temperature swing configuration, where reduction occurs at a temperature much higher than oxidation. Isothermal redox cycling is feasible and avoids the solid–solid heat recuperation and material stability challenges associated with temperature swing; yet, it has long been thought to be inefficient due to the thermodynamic unfavorability of operating the exothermic oxidation reaction at higher temperatures. Here, in this work, we show that this setback can be overcome with iron aluminate-based spinel solid solutions that preferentially exhibit large changes in oxygen content within the range of oxygen partial pressures expected in large-scale systems. We explain the experimental results with a defect model that assigns cation – not oxygen – vacancies as the predominant point defect responsible for their superior water-splitting ability. When operated isothermally at 1400 °C, the iron aluminate-based materials demonstrate a capacity for hydrogen production greater than 500 μmol g–1 and, as a result, remain viable even under high conversion conditions (i.e., pO 2 < 500 : 1 H 2 O : H 2 ), exceeding the hydrogen yields of ceria and two attractive perovskite candidates following a 400 °C (or less) temperature swing. Isothermal water splitting using iron aluminate-based materials opens the door for more simple, robust, and efficient production of renewable hydrogen.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Two-Step Chemical Looping Cycle for Renewable NH 3 Production Based on Non-Catalytic Co 3 Mo 3 N/Co 6 Mo 6 N Reactions

A two-step solar thermochemical looping cycle based on Co 3 Mo 3 N/Co 6 Mo 6 N reduction/nitridation reactions offers a pathway for green NH 3 production that utilizes concentrated solar irradiation, H 2 O, and air as feedstocks. The NH 3 production cycle steps both derive process heat from concentrated solar irradiation and encompass 1) the reduction of Co 3 Mo 3 N in H 2 to Co 6 Mo 6 N and NH 3 ; and 2) nitridation of Co 6 Mo 6 N to Co 3 Mo 3 N with N 2 . Co 3 Mo 3 N reduction/nitridation reactions are examined at different H 2 and/or N 2 partial pressures and temperatures. NH 3 production is quantified in situ using liquid conductivity measurements coupled with mass spectrometry (MS). Solid-state characterization is performed to identify a surface oxygen layer that necessitates the addition of H 2 during cycling to prevent surface oxidation by trace amounts of O 2 . H 2 concentrations of > 5% H 2 /Ar and temperatures >500 °C are required to reduce Co 3 Mo 3 N to Co 6 Mo 6 N and form NH 3 at 1 bar. Complete regeneration of Co 3 Mo 3 N from Co 6 Mo 6 N is achieved at conditions of 700 °C under 25–75% H 2 /N 2 . H 2 pressure-swings are observed to increase NH 3 production during Co 3 Mo 3 N reduction. In conclusion, the results represent the first comprehensive characterization of and definitive non-catalytic production of NH 3 via chemical looping with metal nitrides and provide insights for technology development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

DISH-STARS™ Commercialization (Abstract)

The goal of this project is to aggressively support the near-term commercialization of a new technology platform – based on the integration of solar concentrators and micro- and meso-channel process technology (MMPT) – that was evaluated and identified as a strong candidate for near-term commercialization at EERE’s inaugural Lab-Corps program during early FY2016. Known as STARS, for Solar Thermochemical Advanced Reactor System, or Dish-STARS™ when paired with parabolic dish concentrators, STARS is a promising energy-related technology developed at the Pacific Northwest National Laboratory (PNNL) that efficiently converts solar energy into chemical energy. Combined with economies through hardware mass production, the efficiency of Dish-STARS™ provides a near-term opportunity for the production of renewable electricity, fuels and chemicals. This proposed CRADA project supports the commercialization of Dish-STARS™ in these important ways: The project will support the cooperative development of Dish-STARS™ by the DOE national laboratory and private partners, including the startup company, STARS Corporation, that is being established by the PNNL Lab-Corps team that evaluated STARS on behalf of EERE. The project will provide important transition funding at the time that the previous DOE SunShot project, which has supported Dish-STARS™ development from Technology Readiness Level 3 (TRL 3) to TRL 6, is scheduled to end.

14 SOLAR ENERGY↗
DOE OSTI2022

Formation of 6H-Ba 3 Ce 0.75 Mn 2.25 O 9 during Thermochemical Reduction of 12R-Ba 4 CeMn 3 O 12 : Identification of a Polytype in the Ba(Ce,Mn)O 3 Family

The resurgence of interest in a hydrogen economy and the development of hydrogen-related technologies has initiated numerous research and development efforts aimed at making the generation, storage, and transportation of hydrogen more efficient and affordable. Solar thermochemical hydrogen production (STCH) is a process that potentially exhibits numerous benefits such as high reaction efficiencies, tunable thermodynamics, and continued performance over extended cycling. Although CeO 2 has been the de facto standard STCH material for many years, more recently 12R-Ba 4 CeMn 3 O 12 (BCM) has demonstrated enhanced hydrogen production at intermediate H 2 /H 2 O conditions compared to CeO 2 , making it a contender for large-scale hydrogen production. However, the thermo-reduction stability of 12R-BCM dictates the oxygen partial pressure (pO 2 ) and temperature conditions optimal for cycling. In this study, we identify the formation of a 6H-BCM polytype at high temperature and reducing conditions, experimentally and computationally, as a mechanism and pathway for 12R-BCM decomposition. 12R-BCM was synthesized with high purity and then controllably reduced using thermogravimetric analysis (TGA). Synchrotron X-ray diffraction (XRD) data is used to identify the formation of a 6H-Ba 3 Ce 0.75 Mn 2.25 O 9 (6H-BCM) polytype that is formed at 1350 degrees C under strongly reducing pO 2 . Density functional theory (DFT) total energy and defect calculations show a window of thermodynamic stability for the 6H-polytype consistent with the XRD results. These data provide the first evidence of the 6H-BCM polytype and could provide a mechanistic explanation for the superior water-splitting behaviors of 12R-BCM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Pairing Directional Solar Inputs From Ray Tracing to Solar Receiver/Reactor Heat Transfer Models on Unstructured Meshes: Development and Case Studies

A novel method for pairing surface irradiation and volumetric absorption from Monte Carlo ray tracing to computational heat transfer models is presented. The method is well-suited to directionally and spatially complex concentrated radiative inputs (e.g., solar receivers and reactors). The method employs a generalized algorithm for directly mapping absorbed rays from a Monte Carlo ray tracing model to boundary or volumetric source terms in the computational mesh. The algorithm is compatible with unstructured, two and three-dimensional meshes with varying element shapes. Four case studies were performed on a directly irradiated, windowed solar thermochemical reactor model to validate the method. The method was shown to conserve energy and preserve spatial variation when mapping rays from a Monte Carlo ray tracing model to a computational heat transfer model in ansys fluent.

14 SOLAR ENERGY↗
DOE OSTI2022

Techno-Economic Analysis of Solar-Thermal Ammonia Production [Slides]

CO 2 -neutral ammonia production with concentrated solar technology is theoretically possible based on advanced solar thermochemical looping technology. STAP offers price stability achieving a target price <250 $/tonne NH 3 without including the H 2 . The nitride cost is the most significant expense, accounting for more than the 50% of the total CapEx.

14 SOLAR ENERGY↗
DOE OSTI2023

Assessment of Bulk Oxygen Capacity and Transient Redox Behavior of Foamed Lanthanum Strontium Manganese Perovskites

Synthesis of solar thermochemical hydrogen (STCH) production redox materials with engineered structures, for example, replica foams, can enable efficient heat and mass transport and are critical for scaled-up systems. Prior work has motivated the use of lanthanum strontium manganese (LSM)-type perovskites as foamed STCH materials, but the effect of their morphology on bulk and kinetic behavior has not been reported. In this work, replica and direct foamed samples of La 0.65 Sr 0.35 MnO 3-δ (LSM35) were fabricated and compared to synthesized powders and dense monoliths, and similarly synthesized CeO 2-δ (ceria) foams, regarding their specific reaction rates and bulk oxygen capacity/H 2 yields. Changes in oxygen capacity (Δδ) and reaction rates were measured between 1200 °C and 1400 °C by using fixed ratios of steam and hydrogen during both reduction and oxidation steps, allowing for analysis under practical high conversion conditions. Results suggest bulk behavior and reaction rates of the foamed LSM materials are comparable to their powder analogues. Differences in reaction rates were observed only when replica foamed samples were subjected to rapid laser heating (emulating conditions expected in solar furnaces), which is expected but has not been demonstrated at such a small scale. Here, foamed samples were further subjected to 50 redox cycles at 1400 °C to evaluate their stability. Results show no statistically significant decrease in hydrogen production for any of the foamed samples, but the direct foamed samples became brittle with time. Together, these results demonstrate the viability of replica foamed LSM perovskites for integration in scaled-up STCH systems.

08 HYDROGEN↗
DOE OSTI2023

Toward a tunable fabrication of multifunctional iron-aluminum spinels via solution combustion synthesis: The effects of fuel, heating mode, and Fe:Al precursor ratio

The solid solutions of iron and aluminum spinels (hercynite, maghemite, magnetite, and γ-alumina) are promising materials for emerging technologies such as solar thermochemical fuel production and clean dehydrogenation of fossil fuels. Solution combustion synthesis (SCS) is an attractive technique for the fabrication of these materials as it has been used for synthesis of many nanoscale oxides. However, the design space of SCS is large with many synthesis parameters affecting the properties of the combustion products. To optimize the SCS of these materials, it is important to determine which parameters yield the best properties. In the present work, FeAlO x nanocomposites were obtained by SCS using iron nitrate and aluminum nitrate as precursors and oxidizers. Two fuels (citric acid and glycine), three Fe:Al molar ratios (1:2, 1:1, and 2:1) in the precursors, and three heating modes (hotplate, muffle furnace, and microwave oven) were compared. The products were characterized by X-ray diffraction analysis, scanning electron microscopy, Brunauer-Emmett-Teller surface area analysis, and laser diffraction particle size analysis. The fuel used had the largest impact on the combustion behavior and hence the material properties. The high combustion temperature of glycine allowed for the formation of an FeAl 2 O 4 /Fe 3 O 4 solid solution, while the lower-temperature combustion of citric acid yielded Al-substituted γ-Fe 2 O 3 with high amorphous content. With citric acid, the specific surface area as high as 200 m 2 /g was achieved. The effect of Fe:Al precursor ratio was clearly seen in variations of the lattice parameter, which demonstrated the ability to tune the phase composition. The heating mode had minor effects on material properties, but some differences were observed. As a result, all products obtained by SCS in a microwave oven had low specific surface areas compared to those obtained with a hotplate and a muffle furnace.

Alumina↗
DOE OSTI2022

Redox Defect Thermochemistry of FeAl 2 O 4 Hercynite in Water Splitting from First-Principles Methods

Solar thermochemical hydrogen (STCH) production is a promising route to produce fuels from sunlight via high-temperature water splitting. However, efficient and technologically viable implementations of this process only allow a narrow window of thermodynamic boundary conditions that can be used to cycle the system, thus limiting the design space for suitable metal oxide redox mediators. An oxygen defect redox mechanism can contribute a favorable reduction entropy to expand this window, and computational evaluation of materials with high oxygen defect entropies could play a pivotal role in guiding the discovery and design of suitable oxides. This study employs first-principles calculations to investigate the redox mediating defect mechanism of the STCH candidate material, hercynite (FeAl 2 O 4 ). We compare the results of total energy calculations from density functional theory (DFT) with beyond-DFT approaches, including hybrid functionals and the random phase approximation, which are among the most advanced methods currently feasible for supercell defect calculations. Using the predicted formation energies, we perform thermodynamic modeling of FeAl2O4 reduction and oxidation via free energy minimization that incorporates ideal gas, configurational, and vibrational entropy contributions evaluated within the quasi-harmonic approximation. Special attention is devoted to understanding interactions among co-existing defects, such as the association of pairs and complexes of O vacancies and cation antisite defects, and the effect of mutually compensating defect charges. Our results corroborate the notion that the details of defect interactions can be decisive for the viability of hydrogen production within the desirable STCH process window.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Probing Electronic and Structural Transformations during Thermal Reduction of the Promising Water Splitting Perovskite BaCe 0.25 Mn 0.75 O 3

Here, in this report, we investigate the thermal reduction of the octahedral perovskite BaCe 0.25 Mn 0.75 O 3 (BCM) using in situ electron energy loss spectroscopy (EELS) in an aberration-corrected transmission electron microscope (TEM). The 12R-polytype of BCM is known to demonstrate high solar thermochemical hydrogen production capacity. In situ EELS measurements show that Mn is the active redox cation in BCM, undergoing thermal reduction from Mn 4+ to Mn 3+ during heating to 700 °C inside the TEM under a high vacuum. The progressive reduction of Mn 4+ during oxygen vacancy (O v ) formation was monitored as a function of temperature. Additionally, atomic-resolution scanning transmission electron microscopy identified two different types of twin boundaries present in the oxidized and reduced form of 12R-BCM, respectively. These two types of twin boundaries were shown, via computational modeling, to modulate the site-specific O v formation energies in 12R-BCM. It is concluded that these types of atomic defects provide sites more energetically favorable for O v formation during thermal reduction.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Assessment of exchange-correlation functionals on oxygen vacancy formation energies of metal oxides

Oxygen vacancies are a common defect in oxides and play vital roles in many technological applications such as oxygen separation, catalytic reactors, solid oxide fuel cells, and solar thermochemical water splitting. The oxygen vacancy formation energy is directly related to the oxide reduction enthalpy and the vacancy concentration and, therefore, is a key quantity underlying these applications. The complexity of measuring oxygen vacancy formation energies experimentally suggests the utility of calculations based on density functional theory (DFT). However, the calculated results are strongly dependent on the exchange-correlation functionals and other parameters such as the Hubbard U . In this work, we compare the performance of the meta-GGA strongly constrained and appropriately normed (SCAN) functional and the commonly used semilocal generalized gradient approximation (GGA) functionals with experimental values of structural parameters, band gaps, magnetic structures, and oxygen vacancy formation energies for six representative oxides, i.e., CaMnO 3 , SrMnO 3 , LaMnO 3 , YMnO 3 , LaFeO 3 , and CeO 2 . Further, our results show that SCAN usually has better agreement with the experimental lattice constants and band gaps and larger magnetic moments than the commonly used GGA functionals. Although SCAN overestimates the oxygen vacancy formation energies of transition metal oxides and therefore requires unusually large Hubbard U values to reproduce the experimental reduction enthalpies, it does predict the correct oxygen vacancy formation energy of CeO 2 , which challenges the commonly used GGA and hybrid functionals. Our results underscore the challenges that exist in describing these complex oxides by DFT and may shed light on developing more accurate exchange-correlation functionals for oxygen vacancy formation energy calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Wide-ranging predictions of new stable compounds powered by recommendation engines

The computational search for new stable inorganic compounds is faster than ever, thanks to high-throughput density functional theory (DFT). However, stable compound searches remain highly expensive because of the enormous search space and the cost of DFT calculations. To aid these searches, recommendation engines have been developed. We conduct a systematic comparison of the performance of previously developed recommendation engines, specifically ones based on elemental substitution, data mining, and neural network prediction of formation enthalpy. After identifying ways to improve the recommendation engines, we find the neural network to be superior at recommending stable Heusler compounds. Armed with improved recommendation engines, we identify tens of thousands of compounds that are stable at zero temperature and pressure, now available in the Open Quantum Materials Database. We summarize this diverse pool of compounds, including the elusive mixed anion compounds, and two of their many applications: thermoelectricity and solar thermochemical fuel production.

Science & Technology - Other Topics↗
DOE OSTI2021

Solar-Thermal Ammonia Production: System Design and Technoeconomic Analysis [Slides]

CO 2 -neutral ammonia production with concentrated solar technology is theoretically possible based on advanced solar thermochemical looping technology. The parametric analysis points to the re-oxidation temperature and the H 3 yield as the most influential parameters in the energy balance. The cycle time and the nitride cost are the most influential parameters on the CAPEX. The techno-economics analysis shows the potential of the plant to achieve a target price <125 $\$$/tonne.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Benchmarking Advanced Water Splitting Technologies: Best Practices in Materials Characterization

The high-level project goal is to create a comprehensive Best Practices benchmarking framework at the materials, component, device and systems levels for advanced water splitting technologies. All advanced water splitting pathways covered under the HydroGEN Energy Materials Network (EMN) Consortium, which include advanced high and low temperature electrolysis of water, photoelectrochemical (PEC) water splitting and solar thermochemical hydrogen (STCH) need these best practices to advance materials discovery. These practices will also aid the H2@Scale DOE initiative to accomplish their goals of large-scale H2 production.

08 HYDROGEN↗
DOE OSTI2022

Synchrotron-based techniques for characterizing STCH water-splitting materials

Understanding the role of oxygen vacancy–induced atomic and electronic structural changes to complex metal oxides during water-splitting processes is paramount to advancing the field of solar thermochemical hydrogen production (STCH). The formulation and confirmation of a mechanism for these types of chemical reactions necessitate a multifaceted experimental approach, featuring advanced structural characterization methods. Synchrotron X-ray techniques are essential to the rapidly advancing field of STCH in part due to properties such as high brilliance, high coherence, and variable energy that provide sensitivity, resolution, and rapid data acquisition times required for the characterization of complex metal oxides during water-splitting cycles. X-ray diffraction (XRD) is commonly used for determining the structures and phase purity of new materials synthesized by solid-state techniques and monitoring the structural integrity of oxides during water-splitting processes (e.g., oxygen vacancy–induced lattice expansion). X-ray absorption spectroscopy (XAS) is an element-specific technique and is sensitive to local atomic and electronic changes encountered around metal coordination centers during redox. While in operando measurements are desirable, the experimental conditions required for such measurements (high temperatures, controlled oxygen partial pressures, and H 2 O) practically necessitate in situ measurements that do not meet all operating conditions or ex situ measurements. Here, we highlight the application of synchrotron X-ray scattering and spectroscopic techniques using both in situ and ex situ measurements, emphasizing the advantages and limitations of each method as they relate to water-splitting processes. The best practices are discussed for preparing quenched states of reduction and performing synchrotron measurements, which focus on XRD and XAS at soft (e.g., oxygen K-edge, transition metal L-edges, and lanthanide M-edges) and hard (e.g., transition metal K-edges and lanthanide L-edges) X-ray energies. The X-ray absorption spectra of these complex oxides are a convolution of multiple contributions with accurate interpretation being contingent on computational methods. The state-of-the-art methods are discussed that enable peak positions and intensities to be related to material electronic and structural properties. Through careful experimental design, these studies can elucidate complex structure–property relationships as they pertain to nonstoichiometric water splitting. A survey of modern approaches for the evaluation of water-splitting materials at synchrotron sources under various experimental conditions is provided, and available software for data analysis is discussed.

08 HYDROGEN↗
NASA NTRS1990

Energy storage for a lunar base by the reversible chemical reaction: CaO+H2O reversible reaction Ca(OH)2

A thermochemical solar energy storage concept involving the reversible reaction CaO + H2O yields Ca(OH)2 is proposed as a power system element for a lunar base. The operation and components of such a system are described. The CaO/H2O system is capable of generating electric power during both the day and night. The specific energy (energy to mass ratio) of the system was estimated to be 155 W-hr/kg. Mass of the required amount of CaO is neglected since it is obtained from lunar soil. Potential technical problems, such as reactor design and lunar soil processing, are reviewed.

Perez-Davis, Marla E.↗
NASA NTRS1992

Thermochemical energy storage for a lunar base

A thermochemical solar energy storage concept involving the reversible reaction CaO + H2O yields Ca(OH)2 is proposed as a power system element for a lunar base. The operation and components of such a system are described. The CaO/H2O system is capable of generating electric power during both the day and night. Mass of the required amount of CaO is neglected since it is obtained from lunar soil. Potential technical problems, such as reactor design and lunar soil processing, are reviewed.

Perez-Davis, Marla E.↗