Search NASA⌕ Search

SEARCH · Search NASA

Results for “solvent structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The 1.3 Å resolution structure of the truncated group Ia type IV pilin from Pseudomonas aeruginosa strain P1

The type IV pilus is a diverse molecular machine capable of conferring a variety of functions and is produced by a wide range of bacterial species. The ability of the pilus to perform host-cell adherence makes it a viable target for the development of vaccines against infection by human pathogens such as Pseudomonas aeruginosa . Here, the 1.3 Å resolution crystal structure of the N-terminally truncated type IV pilin from P. aeruginosa strain P1 (ΔP1) is reported, the first structure of its phylogenetically linked group (group I) to be discussed in the literature. The structure was solved from X-ray diffraction data that were collected 20 years ago with a molecular-replacement search model generated using AlphaFold ; the effectiveness of other search models was analyzed. Examination of the high-resolution ΔP1 structure revealed a solvent network that aids in maintaining the fold of the protein. On comparing the sequence and structure of P1 with a variety of type IV pilins, it was observed that there are cases of higher structural similarities between the phylogenetic groups of P. aeruginosa than there are between the same phylogenetic group, indicating that a structural grouping of pilins may be necessary in developing antivirulence drugs and vaccines. These analyses also identified the α–β loop as the most structurally diverse domain of the pilins, which could allow it to serve a role in pilus recognition. Studies of ΔP1 in vitro polymerization demonstrate that the optimal hydrophobic catalyst for the oligomerization of the pilus from strain K122 is not conducive for pilus formation of ΔP1; a model of a three-start helical assembly using the ΔP1 structure indicates that the α–β loop and the D-loop prevent in vitro polymerization.

Bragagnolo, Nicholas↗
DOE OSTI2025

Non-solvents as physical blowing agents in printable silicone foams

Silicone foams were produced by dispersing an incompatible liquid phase (i.e. a non-solvent) into an uncured, liquid silicone. The formulation and processing parameters were varied to see the effect on porosity and pore morphology. Specifically, two fluorosilanes were added to stabilize the inclusion of fluorinated solvents as blowing agents. As the floruosilane content increased, the void content increased up to about 44 vol. % when the fluorosilane comprised 18 wt. % of the initial formulation. Fumed silica that was treated with a fluorinated silane was also used to try to stabilize the dispersed liquid. While the fumed silica content did not have a strong effect on the total void content, the morphology changed when silica content changed. Various fluorinated solvents with distinct chemical structures were used as the non-solvent and then removed after curing of the silicone. The interaction of the internal non-solvent phase and the silicone phase was expected to influence the porosity. These insights highlight how the manipulation of formulation and processing parameters, focusing on the inclusion of fluorosilanes and fluorinated solvents, contributes to the understanding of how incompatible liquid phases interact with silicone matrices to control porosity and pore morphology. Additionally, these interactions also influenced processability, leading to formulations that could be printed. Higher content of non-solvent inclusions could increase the yield stress and storage modulus of an uncured formulation, leading to the ability to tune intrastrand porosity while a 3D printed architecture could be modified to introduce porosity between the strands. Furthermore, in addition to fluorinated solvents, we also considered non-fluorinated solvents since these may be more industrially relevant in the future. Overall, this approach provides an alternative route to producing porous foams that can be 3D printed, which could be useful for applications like cushioning and protective gear.

physical blowing agent↗
DOE OSTI2021

Self-Assembled Vesicles from Mixed Brush Nanoparticles in Solution

The self-assembly of binary polymer-grafted nanoparticles (NPs) in a selective solvent is investigated using coarse-grained simulations. Simulations are performed using theoretically informed Langevin dynamics (TILD), a particle-based method that employs a particle-to-mesh scheme to efficiently calculate the nonbonded interactions. Here, the particles are densely grafted with two immiscible polymers, A and B, that are permanently bound to the NP either at random grafting sites (random-grafted) or with all the A chains on one hemisphere of the NP and all the B chains on the other hemisphere (Janus-grafted). For NPs with random grafting, the polymers phase-separate on the surface of the NP to form Janus-type structures in dilute solution, even though some of the chains have to stretch around the particle to form the Janus structure. When the solvent quality is sufficiently poor for the solvophobic chains, the binary grafted NPs assemble into various structures, including double-walled vesicles. In particular, vesicles are formed when the solvophilic volume fraction is between 0.2 and 0.3, in a similar range to that required for vesicle formation in diblock copolymers in a selective solvent. For mixed-grafted NPs, there is considerable variation in the structure of each individual NP, but nevertheless, these NPs form ordered vesicles, similar to those formed by Janus-grafted NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Weakly solvating electrolytes: a solvation-centric paradigm for rechargeable metal batteries

Electrolyte design has long followed a solvation-first paradigm that prioritizes solvents capable of maximizing salt dissociation and ionic conductivity, while treating interfacial degradation and rheological limitations as secondary constraints. Although this approach has enabled significant progress in lithium-ion and sodium-ion batteries, it inherently favors solvent-dominated solvation structures that destabilize reactive metal interfaces. Weakly solvating electrolytes (WSEs) offer a fundamentally different strategy. By using solvents with intrinsically low donor strength and minimal electrostatic affinity for cations, WSEs suppress cation–solvent coordination and promote anion-rich solvation shells without relying on salt superconcentration. This shift lowers desolvation barriers, redirects interfacial decomposition pathways, and supports the formation of inorganic-rich, stable interphases. In this review, we discuss the molecular and solvation criteria that distinguish WSEs from conventional and concentrated or locally concentrated electrolyte systems, examine their implementation across different chemistries, and identify unresolved design challenges. WSEs are presented not as a niche formulation, but as a solvation-centric framework for rethinking electrolyte function in metal battery technologies.

Karbak, Mehdi [Pacific Northwest National Laborato↗
DOE OSTI2026

Discerning Influences from Enthalpy and Entropy at Aqueous Interfaces Involved in Biomass Conversions in Porous Catalysts

Project Summary: The goal in this proposal is to learn how solvent influences the enthalpies and entropies of catalytic species in zeolite pores. Specifically, the physical, chemical, and structural features of solvent, catalytic species, and zeolite pores that determine enthalpies and entropies of solvation in solution phase biomass conversions will be interrogated using multiscale simulations and machine learning. Multiscale simulations are based off of existing strategies and employ quantum mechanics and classical molecular dynamics, providing an excellent balance between chemical accuracy and computational expense. They are capable of calculating enthalpies and entropies of solvation separately and have been validated in prior work to achieve high accuracy compared to their parent methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Self-Patterning Tetrathiafulvalene Crystalline Films

Tetrathiafulvalene (TTF) crystals grown from the melt are organized as spherulites in which helicoidal fibrils growing radially from the nucleation center twist in concert with one another. Alternating bright and dark concentric bands are apparent when films are viewed between crossed polarizers, indicating an alternating pattern of crystallographic faces exposed at the film surface. Band-dependent reorganization of the TTF crystals was observed during exposure to methanol vapor. Crystalline growth appears on bright bands at the expense of the dark bands. After a 24 h period of exposure to methanol vapor, the original spherulites were completely restructured, and the films comprise isolated, concentric circles of crystallites whose orientations are determined by the initial TTF crystal fibril orientation. While the surface of these outgrowths appears faceted and smooth, cross-sectional SEM images revealed a semiporous inner structure, suggesting solvent-vapor-induced recrystallization. Collectively, these results show that crystal twisting can be used to rhythmically redistribute material. Crystal twisting is a common and often controllable phenomenon independent of molecular or crystal structure and therefore offers a generalizable path to spontaneous pattern formation in a wide range of materials.

36 MATERIALS SCIENCE↗
NASA NTRS2000

Fluid Physics and Macromolecular Crystal Growth in Microgravity

The first protein crystallization experiment in microgravity was launched in April, 1981 and used Germany's Technologische Experimente unter Schwerelosigkeit (TEXUS 3) sounding rocket. The protein P-galactosidase (molecular weight 465Kda) was chosen as the sample with a liquid-liquid diffusion growth method. A sliding device brought the protein, buffer and salt solution into contact when microgravity was reached. The sounding rocket gave six minutes of microgravity time with a cine camera and schlieren optics used to monitor the experiment, a single growth cell. In microgravity a strictly laminar diffusion process was observed in contrast to the turbulent convection seen on the ground. Several single crystals, approx 100micron in length, were formed in the flight which were of inferior but of comparable visual quality to those grown on the ground over several days. A second experiment using the same protocol but with solutions cooled to -8C (kept liquid with glycerol antifreeze) again showed laminar diffusion. The science of macromolecular structural crystallography involves crystallization of the macromolecule followed by use of the crystal for X-ray diffraction experiments to determine the three dimensional structure of the macromolecule. Neutron protein crystallography is employed for elucidation of H/D exchange and for improved definition of the bound solvent (D20). The structural information enables an understanding of how the molecule functions with important potential for rational drug design, improved efficiency of industrial enzymes and agricultural chemical development. The removal of turbulent convection and sedimentation in microgravity, and the assumption that higher quality crystals will be produced, has given rise to the growing number of crystallization experiments now flown. Many experiments can be flown in a small volume with simple, largely automated, equipment - an ideal combination for a microgravity experiment. The term "protein crystal growth" is often historically used to describe these microgravity experiments. This is somewhat inaccurate as the field involves the study of many varied biological molecules including viruses, proteins, DNA, RNA and complexes of those structures. For this reason we use the term macromolecular crystal growth. In this chapter we review a series of diagnostic microgravity crystal growth experiments carried out principally using the European Space Agency (ESA) Advanced Protein Crystallization Facility (APCF). We also review related research, both experimental and theoretical, on the aspects of microgravity fluid physics that affect microgravity protein crystal growth. Our experiments have revealed some surprises that were not initially expected. We discuss them here in the context of practical lessons learnt and how to maximize the limited microgravity opportunities available.

Helliwell, John R.↗
DOE OSTI2022

Molecular simulation of glycerol-derived triether podands for lithium ion solvation

Solvate ionic liquids (ILs) are promising candidates for several applications due to their stability, high coulombic efficiency, and low volatility. In this work, we investigate the solvation of lithium-bistriflimide by different glycerol-derived triether solvents, using molecular dynamics simulations. Very strong interactions between Li + and the solvent oxygen sites are found, leading to significant conformational changes in the solvent. Here, by comparing the conformation of the neat solvents with their IL mixtures at different concentrations and temperatures, we find that the presence of Li + induces a distinct crown-like structure in the solvent molecules. The Li + cations and the surrounding solvent form a podand complex, which is stable even at elevated temperatures. These glycerol-derived solvents exhibit distinct interactions with Li + cations which may be exploited in electrolytic applications or lithium recovery processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Control of solvent adsorption in porous liquids through solvent-solvent interactions

Type 3 Porous Liquids (PLs) are a new class of materials that offer transformative potential for gas capture and utilization. These PLs are comprised of a bulky solvent with a suspended empty nanoporous material that enables selective and high-capacity capture from dilute and complex gas steams. The relationship between the nanoporous material, the structure of the solvent molecules, and the time dependence of solvent adsorption into the nanoporous material governs long term adsorption properties. Herein, molecular dynamics (MD) calculations evaluated the solvent dynamics of nine neat solvents with a broad range of chemical identities and experimental density measurements probed the time-dependent adsorption of these solvents into the ZIF-8 metal-organic frameworks (MOFs) to form PL dispersions over three weeks. Two of the nine dispersion, using glyceryl triacetate and 2’-hydroxyacetopheneone as solvents, presented sufficiently low solvent infiltration—characterized by solvent adsorption less than 40% of the ZIF-8 pore volume—to be viable as PLs. The experimental solvent adsorption data for ZIF-8 dispersed in the four aromatic solvents (acetophenone, methylbenzoate, 2-isopropylphenol, and 2’-hydroxyacetophenone) was fit to a kinetic model to quantify rate of solvent adsorption into ZIF-8. The rates of adsorption of these four similar-sized solvents demonstrated that solvent adsorption is slowed and limited by solvent clustering dynamics that are, in turn, driven by intermolecular hydrogen bonding. Ultimately, experimental solvent sorption measurements indicated that glyceryl triacetate and 2’-hydroxyacetophenone with ZIF-8 formed PLs with the most stable porosity and the greatest potential for gas capture. In conclusion, the combined experimental-computational materials exploration framework used here reveals a novel relationship between molecular scale solvent dynamics and macroscale solvent adsorption kinetics critical for the discovery and rapid evaluation of Type 3 PL compositions.

Hydrogen bonding↗
NASA NTRS2005

Improved Charge-Transfer Fluorescent Dyes

Improved charge-transfer fluorescent dyes have been developed for use as molecular probes. These dyes are based on benzofuran nuclei with attached phenyl groups substituted with, variously, electron donors, electron acceptors, or combinations of donors and acceptors. Optionally, these dyes could be incorporated as parts of polymer backbones or as pendant groups or attached to certain surfaces via self-assembly-based methods. These dyes exhibit high fluorescence quantum yields -- ranging from 0.2 to 0.98, depending upon solvents and chemical structures. The wavelengths, quantum yields, intensities, and lifetimes of the fluorescence emitted by these dyes vary with (and, hence, can be used as indicators of) the polarities of solvents in which they are dissolved: In solvents of increasing polarity, fluorescence spectra shift to longer wavelengths, fluorescence quantum yields decrease, and fluorescence lifetimes increase. The wavelengths, quantum yields, intensities, and lifetimes are also expected to be sensitive to viscosities and/or glass-transition temperatures. Some chemical species -- especially amines, amino acids, and metal ions -- quench the fluorescence of these dyes, with consequent reductions in intensities, quantum yields, and lifetimes. As a result, the dyes can be used to detect these species. Another useful characteristic of these dyes is a capability for both two-photon and one-photon absorption. Typically, these dyes absorb single photons in the ultraviolet region of the spectrum (wavelengths < 400 nm) and emit photons in the long-wavelength ultraviolet, visible, and, when dissolved in some solvents, near-infrared regions. In addition, these dyes can be excited by two-photon absorption at near-infrared wavelengths (600 to 800 nm) to produce fluorescence spectra identical to those obtained in response to excitation by single photons at half the corresponding wavelengths (300 to 400 nm). While many prior fluorescent dyes exhibit high quantum yields, solvent-polarity- dependent fluorescence behavior, susceptibility to quenching by certain chemical species, and/or two-photon fluorescence, none of them has the combination of all of these attributes. Because the present dyes do have all of these attributes, they have potential utility as molecular probes in a variety of applications. Examples include (1) monitoring curing and deterioration of polymers; (2) monitoring protein expression; (3) high-throughput screening of drugs; (4) monitoring such chemical species as glucose, amines, amino acids, and metal ions; and (5) photodynamic therapy of cancers and other diseases.

Meador, Michael↗
DOE OSTI2023

Highly tunable structure-by-design polymer brush membranes for organic solvent nanofiltration

Synthetic polymeric nanofiltration membrane processes offer an alternate low-energy option to energy-intensive distillation to fractionate similar size organic solvents for chemical, petroleum, food and biotechnology industries. Here, in this study, we synthesize and test a new class of structure-by-design hydrophilic polymeric brush membranes, that address the limitations of commercial polymer membranes, are tunable and exhibit commercially relevant filtration performance. Because these brush membranes are grafted by Single Electron Transfer-Living Radical Polymerization (SET-LRP) and replace statistically random phase inversion or interfacial polymerization used for synthesizing commercial polymer membranes, their porous structure can be remodeled by varying their morphology and chemistry. We graft hydroxyethyl methacrylate (HEMA) brush structures with short and long crosslinkers, demonstrate two competing phenomena - pore stiffening and opening - and obtain high selectivity at reasonable permeability for commercially relevant methanol/toluene separation. This new class of stable, tunable, and scalable membranes offers exciting opportunities to reduce energy for separation of organic solvents.

42 ENGINEERING↗
DOE OSTI2020

Insights into lithium ion deposition on lithium metal surfaces

Lithium metal is among the most promising anodes for the next generation of batteries due to its high theoretical energy density and high capacity. Challenges such as extreme reactivity and lithium dendrite formation have kept lithium metal anodes away from practical applications. However, the underlying mechanisms of Li ion deposition from the electrolyte solution onto the anode surface are still poorly understood due to their inherent complexity. In this work, density functional theory calculations and thermodynamic integration via constrained molecular dynamics simulations are conducted to study the electron and ion transfer between lithium metal slab and the electrolyte in absence of an external field. Here, we explore the effect of the solvent chemistry and structure, distance of the solvated complex from the surface, anion–cation separation, and concentration of Li-salts on the deposition of lithium ions from the electrolyte phase onto the surface. Ethylene carbonate (EC), 1,2-dimethoxyethane (DME), 1,3-dioxolane (DOL), and mixtures of them are used as solvents. These species compete with the salt anion and the Li cation for electron transfer from the surface. It is found that the structure and properties of the solvation shell around the lithium cation has a great influence on the ability of the cation to diffuse as well as on its surrounding electron environment. DME molecules allow easier motion of the lithium ion compared with EC and DOL molecules. The slow growth approach allows the study of energy barriers for the ion diffusion and desolvation during the deposition pathway. This method helps elucidating the underlying mechanisms on lithium-ion deposition and provides a better understanding of the early stages of Li nucleation.

25 ENERGY STORAGE↗
DOE OSTI2022

Electronic Structure Calculations of the Fundamental Interactions in Solvent Extraction Desalination

Solvent extraction desalination (SED) is a promising membrane-free desalination technology, but new solvents are still needed that can improve the molecular-level water selectivity, while minimizing solvent contamination in the aqueous phase. Improvements in solvent design for SED require a fundamental understanding of the molecular interactions governing solvation behavior. Herein, quantum chemical calculations are used to delineate different fundamental interactions in water-solvent systems involving 38 different solvents, with a particular focus on the role of the electrostatic potential characteristics. Furthermore, these interactions are rigorously analyzed using the independent gradient model based on Hirshfeld partition (IGMH), Symmetry-Adapted Perturbation Theory (SAPT), as well as the energy decomposition analysis based on force field (EDA-FF) to compare against a standard force field model. The solvation free energies and partition coefficients are also calculated to estimate water extraction performance in a bulk solvent system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

PPI DataHub Project Data Package: S. elongatus PCC 7942 Limited Proteolysis and Thermal Proteome Profiling Structural Proteomics (JM-PB-DP3)

The purpose of this experiment was to investigate structural alterations in proteins involved in central carbon metabolism and photosynthetic electron transfer pathways in Synechococcus elongatus PCC 7942. Sample data was obtained from S. elongatus cell lysates using three complementary mass spectrometry (MS) techniques using limited proteolysis (LiP-MS), thermal proteome profiling (TPP-MS), and redox enrichment (Redox-MS) in evaluating alterations solvent accessibility and structural stability caused by light perturbation at the molecular level. Experimentally processed sample data for LiP and TPP proteomic datasets were derived from the same cell culture stock, prepared simultaneously in parallel, and acquired by mass spectrometry. Processed datasets are openly accessible from the download button and contain secondary processed proteomic results files, computed outputs, and supporting metadata materials. Experimental samples processed for LiP-MS label-free quantification (LFQ) or TPP-MS tandem mass tag (TMT) 10-plex were acquired using a Q-Exactive HF-X mass spectrometer and processed/compiled using either MSGF+ (v2024.03.26) or ​​​​PlexedPiper for proteome evaluation. Additional software supporting downstream proteomic analysis include FragPipe (v.4.0), MSFragger (v.22.1), and an adapted Microbial Isolate LiP Analysis Workflow (located at Zenodo). Processed proteomic data downloads include a sample naming key, normalized quantification results files, and processed protein annotated abundance files.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Beta-Amino Carboxylate (BAC) non-aqueous physical solvents for enhanced CO2 separations in pre-combustion carbon capture, industrial CO 2 capture, and biogas upgrading processes

Novel beta-amino carboxylate (BAC) solvents have been synthesized and tested to efficiently capture carbon dioxide (CO 2 ) from process gas streams with CO 2 partial pressure intermediate between pre-combustion and post-combustion capture. The BAC solvents have molecular structures characterized by alkyl-substituted amides or esters containing a secondary amine functional group on the second carbon from the carbonyl carbon (referred to as the beta “β” carbon). The ester or amide functional group combined with optimal steric crowding around the amine nitrogen by proximate alkyl groups are tailored to modify the strength of CO 2 binding in the solvent. The solvents possess high CO 2 solubilities and high gas selectivity including good CO 2 /H 2 O selectivity and can be utilized for CO 2 absorption over a range of partial pressures. Due to low volatility, many of the solvents can be operated at or above ambient temperature which eliminates solvent chilling and allows regeneration using low grade waste heat. These novel solvents offer an opportunity for efficient carbon capture for a range of applications including biogas upgrading, hydrogen production, and pre-combustion carbon capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Passivating Nucleobases Bring Charge Transfer Character to Optically Active Transitions in Small Silver Nanoclusters

DNA-wrapped silver nanoclusters (DNA–AgNCs) are known for their efficient luminescence. However, their emission is highly sensitive to the DNA sequence, the cluster size, and its charge state. To get better insights into photophysics of these hybrid systems, simulations based on density functional theory (DFT) are performed. Our calculations elucidate the effect of the structural conformations, charges, solvent polarity, and passivating bases on optical spectra of DNA–AgNCs containing five and six Ag atoms. It is found that inclusion of water in calculations as a polar solvent media results in stabilization of nonplanar conformations of base-passivated clusters, while their planar conformations are more stable in vacuum, similar to the bare Ag5 and Ag6 clusters. Cytosines and guanines interact with the cluster twice stronger than thymines, due to their larger dipole moments. In addition to the base–cluster interactions, hydrogen bonds between bases notably contribute to the structure stabilization. While the relative intensity, line width, and the energy of absorption peaks are slightly changing depending on the cluster charge, conformations, and base types, the overall spectral shape with five well-resolved bands at 2.5–5.5 eV is consistent for all structures. Independent of the passivating bases and the cluster size and charge, the low energy optical transitions at 2.5–3.5 eV exhibit a metal to ligand charge transfer (MLCT) character with the main contribution emerging from Ag-core to the bases. Cytosines facilitate the MLCT character to a larger degree comparing to the other bases. However, the doublet transitions in clusters with the open shell electronic structure (Ag5 and Ag6 + ) result in appearance of additional red-shifted (<2.5 eV) and optically weak band with negligible MLCT character. The passivated clusters with the closed shell electronic structure (Ag5 + and Ag6) exhibit higher optical intensity of their lowest transitions with much higher MLCT contribution, thus having better potential for emission, than their open shell counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗