Search NASA⌕ Search

SEARCH · Search NASA

Results for “state extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Aerodynamic parameters of the Navion airplane extracted from flight

An iterative method, which is characterized as a maximum-likelihood minimum-variance technique, was used to extract the aerodynamic parameters of a Navion airplane from flight data. The purposes were to compare the results with parameters obtained from wind-tunnel tests and with results obtained by analog matching the same data, and to develop techniques for application of the parameter extraction program. Results from the study showed that the parameter-extraction program can produce aerodynamic parameters which will permit close estimation of the aircraft time histories used in the extraction process. The program determined an estimate of the standard deviations of the states and parameters. These estimates were used to indicate how well the calculated states fit the flight data and the confidence in the values of the estimated parameters. The study also showed that the values of the parameters were affected by the data and mathematical model used during the extraction process. Because of the lack of confidence in the parameters extracted by use of some of the sets of data, several parameters were estimated by other methods. By using a combination of methods, a set of parameters which gave a fit to the data was obtained.

Suit, W. T.↗
NASA NTRS2009

Non-ambipolar radio-frequency plasma electron source and systems and methods for generating electron beams

An electron generating device extracts electrons, through an electron sheath, from plasma produced using RF fields. The electron sheath is located near a grounded ring at one end of a negatively biased conducting surface, which is normally a cylinder. Extracted electrons pass through the grounded ring in the presence of a steady state axial magnetic field. Sufficiently large magnetic fields and/or RF power into the plasma allow for helicon plasma generation. The ion loss area is sufficiently large compared to the electron loss area to allow for total non-ambipolar extraction of all electrons leaving the plasma. Voids in the negatively-biased conducting surface allow the time-varying magnetic fields provided by the antenna to inductively couple to the plasma within the conducting surface. The conducting surface acts as a Faraday shield, which reduces any time-varying electric fields from entering the conductive surface, i.e. blocks capacitive coupling between the antenna and the plasma.

Hershkowitz, Noah↗
NASA NTRS2011

Non-ambipolar radio-frequency plasma electron source and systems and methods for generating electron beams

An electron generating device extracts electrons, through an electron sheath, from plasma produced using RF fields. The electron sheath is located near a grounded ring at one end of a negatively biased conducting surface, which is normally a cylinder. Extracted electrons pass through the grounded ring in the presence of a steady state axial magnetic field. Sufficiently large magnetic fields and/or RF power into the plasma allow for helicon plasma generation. The ion loss area is sufficiently large compared to the electron loss area to allow for total non-ambipolar extraction of all electrons leaving the plasma. Voids in the negatively-biased conducting surface allow the time-varying magnetic fields provided by the antenna to inductively couple to the plasma within the conducting surface. The conducting surface acts as a Faraday shield, which reduces any time-varying electric fields from entering the conductive surface, i.e. blocks capacitive coupling between the antenna and the plasma.

Hershkowitz, Noah↗
NASA NTRS1975

Orbit and attitude state recoveries from Landmark data

The navigation of earth-referenced satellites with imaging data rather than, or in addition to, conventional radio tracking and attitude sensor telemetry is gaining increased popularity. Driving forces include a trend towards spacecraft autonomy, a need for timely and highly accurate griding information, and a growing awareness of the presence of high quality navigation information contained in such data. This paper describes the techniques used and the results obtained in an experiment to determine the orbit and attitude state of the geosynchronous SMS-1 spacecraft from Landmark observations extracted from earth images generated by the on-board Visible and Infrared Spin-Scan Radiometer (VISSR).

Fuchs, A. F.↗
NASA NTRS1975

Orbit and attitude state recoveries from Landmark data

The navigation of earth-referenced satellites with imaging data rather than, or in addition to, conventional radio tracking and attitude sensor telemetry is gaining increased popularity. Driving forces include a trend towards spacecraft autonomy, a need for timely and highly accurate gridding information, and a growing awareness of the presence of high quality navigation information contained in such data. This paper describes the techniques used and the results obtained in an experiment to determine the orbit and attitude state of the geosynchronous SMS-1 spacecraft from Landmark observations extracted from earth images generated by the on-board Visible and Infrared Spin-Scan Radiometer (VISSR).

Fuchs, A. F.↗
NASA NTRS1983

Advanced LOX/H sub 2 engine technologies for future OTVs

The optimization methods and trade studies which were used to define a 1980 state-of-the-art design of orbital transfer vehicles are summarized. The advanced thrust chamber, turbomachinery, and engine power cycle technologies recommended for development and verification during the 1980's are discussed. The state-of-the-art design serves as one of the reference points for evaluation of the advanced technology concepts. A second reference point is provided by the 1960 state-of-the-art RL-10 engine. Advanced heat energy extraction concepts in the combustor and injector are presented that will permit the high chamber pressures expected of the advanced expander cycle engine concept. Advanced turbomachinery concepts are selected that will help utilize efficiently the heat energy extracted in the thrust chamber and aid in uprating chamber pressures to values five times those realized with 1960 to 1980 technologies. The higher chamber pressure benefits are maximized with nozzle concepts that will package within a short retracted length and extend to the very high expansion area ratios required for specific impulse values significantly higher than those now realized by operational systems. Control system component concepts studied will allow utilization of the high turbine drive energy levels in a reliable repeatable manner that will reduce program risk and enhance overall space transportation system mission life cycle cost.

Glass, J.↗
NASA NTRS1982

Atomic collisions in the presence of laser radiation - Time dependence and the asymptotic wave function

A time-dependent, wave-packet description of atomic collisions in the presence of laser radiation is extracted from the more conventional time-independent, stationary-state description. This approach resolves certain difficulties of interpretation in the time-independent approach which arise in the case of asymptotic near resonance. In the two-state model investigated, the approach predicts the existence of three spherically scattered waves in this asymptotically near-resonant case.

Devries, P. L.↗
NASA NTRS1984

Utilization of LANDSAT orbital imagery in the soil survey processes at Rio Grande do Norte state

Pedologic photointerpretative criteria adapted to LANDSAT orbital imagery were used: drainage (pattern, integration degree, density and uniformity degree); relief (pattern, dissection degree and crest lines); photographic texture, photographic tonnality, and the land use (type, glebas size and intensity of use). The performance of the imagery as an auxiliar tool in the soil survey processes, at Rio Grande do Norte State was evaluated. The drainage and relief elements were easily extracted from the imagery and also ones that provided the greatest deductive possibility about pedologic boundaries. Other analyzed criteria were considered only auxiliaries, corroborating some soil limits in the evidences convergence phase. The principal pedologic dominions of the 30,000 sq km are covered by the same LANDSAT image (WRS 359/16) were delimited with good precision: (1) fluvial plains, beaches, dunes and coastal mangroves; (2) North Coast line Plateau; (3) Acu Sandstone Zone; (4) residual plateaus of the Tertiary; and (6) plains of the embasement.

Formaggio, A. R.↗
NASA NTRS1990

A modeling technique for STOVL ejector and volume dynamics

New models for thrust augmenting ejector performance prediction and feeder duct dynamic analysis are presented and applied to a proposed Short Take Off and Vertical Landing (STOVL) aircraft configuration. Central to the analysis is the nontraditional treatment of the time-dependent volume integrals in the otherwise conventional control-volume approach. In the case of the thrust augmenting ejector, the analysis required a new relationship for transfer of kinetic energy from the primary flow to the secondary flow. Extraction of the required empirical corrections from current steady-state experimental data is discussed; a possible approach for modeling insight through Computational Fluid Dynamics (CFD) is presented.

Drummond, C. K.↗
NASA NTRS1990

A modeling technique for STOVL ejector and volume dynamics

New models for thrust augmenting ejector performance prediction and feeder duct dynamic analysis are presented and applied to a proposed Short Take Off and Vertical Landing (STOVL) aircraft configuration. Central to the analysis is the nontraditional treatment of the time-dependent volume integrals in the otherwise conventional control-volume approach. In the case of the thrust augmenting ejector, the analysis required a new relationship for transfer of kinetic energy from the primary flow to the secondary flow. Extraction of the required empirical corrections from current steady-state experimental data is discussed; a possible approach for modeling insight through Computational Fluid Dynamics (CFD) is presented.

Drummond, C. K.↗
NASA NTRS1993

A preliminary study on ice shape tracing with a laser light sheet

Preliminary work towards the development of an automated method of measuring the shape of ice forming on an airfoil during wind tunnel tests has been completed. A thin sheet of light illuminated the front surfaces of rime, glaze, and mixed ice shapes and a solid-state camera recorded images of each. A maximum intensity algorithm extracted the profiles of the ice shapes and the results were compared to hand tracings. Very good general agreement was found in each case.

Mercer, Carolyn R.↗
NASA NTRS2013

Analyzing Carbon Dioxide and Methane Emissions in California Using Airborne Measurements and Model Simulations

Greenhouse gas (GHG) concentrations have increased over the past decades and are linked to global temperature increases and climate change. These changes in climate have been suggested to have varying effects, and uncertain consequences, on agriculture, water supply, weather, sea-level rise, the economy, and energy. To counteract the trend of increasing atmospheric concentrations of GHGs, the state of California has passed the California Global Warming Act of 2006 (AB-32). This requires that by the year 2020, GHG (e.g., carbon dioxide (CO2) and methane (CH4)) emissions will be reduced to 1990 levels. To quantify GHG fluxes, emission inventories are routinely compiled for the State of California (e.g., CH4 emissions from the California Greenhouse Gas Emissions Measurement (CALGEM) Project). The major sources of CO2 and CH4 in the state of California are: transportation, electricity production, oil and gas extraction, cement plants, agriculture, landfills/waste, livestock, and wetlands. However, uncertainties remain in these emission inventories because many factors contributing to these processes are poorly quantified. To alleviate these uncertainties, a synergistic approach of applying air-borne measurements and chemical transport modeling (CTM) efforts to provide a method of quantifying local and regional GHG emissions will be performed during this study. Additionally, in order to further understand the temporal and spatial distributions of GHG fluxes in California and the impact these species have on regional climate, CTM simulations of daily variations and seasonality of total column CO2 and CH4 will be analyzed. To assess the magnitude and spatial variation of GHG emissions and to identify local “hot spots”, airborne measurements of CH4 and CO2 were made by the Alpha Jet Atmospheric eXperiment (AJAX) over the San Francisco Bay Area (SFBA) and San Joaquin Valley (SJV) in January and February 2013 during the Discover-AQ-CA study. High mixing ratios of GHGs were observed in-flight with a high degree of spatial variability. To provide an additional method to quantify GHG emissions, and analyze AJAX measurement data, the GEOS-Chem CTM is used to simulate SFBA/SJV GHG measurements. A nested-grid version of GEOS-Chem will be applied and utilizes varying emission inventories and model parameterizations to simulate GHG fluxes/emissions. The model considers CO2 fluxes from fossil fuel use, biomass/biofuel burning, terrestrial and oceanic biosphere exchanges, shipping and aviation, and production from the oxidation of carbon monoxide, CH4, and non-methane volatile organic carbons. The major sources of CH4 simulated in GEOS-Chem are domesticated animals, rice fields, natural gas leakage, natural gas venting/flaring (oil production), coal mining, wetlands, and biomass burning. Preliminary results from the comparison between available observations (e.g., AJAX and CALGEM CH4 emission maps) and GEOS-Chem results will be presented, along with a discussion of CO2 and CH4 source apportionment and the use of the GEOS-Chem-adjoint to perform inverse GHG modeling.

Johnson, Matthew S.↗
NASA NTRS1979

Shuttle entry trajectory reconstruction using inflight accelerometer and gyro measurements

An error analysis has been made of a Shuttle postflight entry trajectory reconstruction process to obtain trajectory state estimation errors and to assess the impact of these errors on Shuttle aerodynamic force coefficient extraction. In this analysis, the entry trajectory is assumed to be reconstructed via numerical integration of onboard accelerometer and gyro measurements and constrained to satisfy ground-based radio tracking. The trajectory state estimation errors are calculated using a Kalman-Schmidt sequential filter assuming various measurement error models and combinations of ground-based tracking. The resultant trajectory estimation errors are analyzed in a simplified perturbation process to establish the accuracy to which postflight aerodynamic force coefficients can be determined. Results are presented which show that the principal error sources affecting the trajectory reconstruction and thus the force coefficient extraction, assuming perfect atmospheric density knowledge, are the accelerometer and gyro resolution, acceleration-sensitive gyro drifts, and the alignment uncertainties associated with integration on the Shuttle.

Compton, H. R.↗
NASA NTRS2011

Recent Rates of Forest Harvest and Conversion in North America

Incorporating ecological disturbance into biogeochemical models is critical for estimating current and future carbon stocks and fluxes. In particular, anthropogenic disturbances, such as forest conversion and wood harvest, strongly affect forest carbon dynamics within North America. This paper summarizes recent (2000.2008) rates of extraction, including both conversion and harvest, derived from national forest inventories for North America (the United States, Canada, and Mexico). During the 2000s, 6.1 million ha/yr were affected by harvest, another 1.0 million ha/yr were converted to other land uses through gross deforestation, and 0.4 million ha/yr were degraded. Thus about 1.0% of North America fs forests experienced some form of anthropogenic disturbance each year. However, due to harvest recovery, afforestation, and reforestation, the total forest area on the continent has been roughly stable during the decade. On average, about 110 m3 of roundwood volume was extracted per hectare harvested across the continent. Patterns of extraction vary among the three countries, with U.S. and Canadian activity dominated by partial and clear ]cut harvest, respectively, and activity in Mexico dominated by conversion (deforestation) for agriculture. Temporal trends in harvest and clearing may be affected by economic variables, technology, and forest policy decisions. While overall rates of extraction appear fairly stable in all three countries since the 1980s, harvest within the United States has shifted toward the southern United States and away from the Pacific Northwest.

Masek, Jeffrey G.↗
NASA NTRS1981

Status and outlook for NASA's Land Remote Sensing Program

Both LANDSAT 2 and LANDSAT 3 are currently in operational status following recovery from technical problems. The LANDSAT D program continues NASA's R&D with the dual objectives of assessing the capabilities of the thematic mapper sensor and evaluating the requirements for an operational land observing system. LANDSAT D' will not be launched until LANDSAT D ceases operation, to provide data continuity through 1988. Future NASA remote sensing programs will continue to emphasize research, technology development, cooperative projects with end users of data and cooperation with the National Oceanic and Atmospheric Administration (NOAA) on transition to an operational land observing system. Technology development should extend the results of research to practical applications through improved ground data processing and information extraction techniques and development of new sensors such as the solid state multi-spectral linear array.

Weinstein, R. H.↗
NASA NTRS1984

Evaluation of entropy and JM-distance criterions as features selection methods using spectral and spatial features derived from LANDSAT images

A study area near Ribeirao Preto in Sao Paulo state was selected, with predominance in sugar cane. Eight features were extracted from the 4 original bands of LANDSAT image, using low-pass and high-pass filtering to obtain spatial features. There were 5 training sites in order to acquire the necessary parameters. Two groups of four channels were selected from 12 channels using JM-distance and entropy criterions. The number of selected channels was defined by physical restrictions of the image analyzer and computacional costs. The evaluation was performed by extracting the confusion matrix for training and tests areas, with a maximum likelihood classifier, and by defining performance indexes based on those matrixes for each group of channels. Results show that in spatial features and supervised classification, the entropy criterion is better in the sense that allows a more accurate and generalized definition of class signature. On the other hand, JM-distance criterion strongly reduces the misclassification within training areas.

Parada, N. D. J.↗
NASA NTRS1989

Time and frequency-domain identification and verification of BO-105 dynamic models

Mathematical models for the dynamics of the DLR BO 105 helicopter are extracted from flight test data using two different approaches: frequency-domain and time-domain identification. Both approaches are reviewed. Results from an extensive data consistency analysis are given. Identifications for 6 degrees of freedom (DOF) rigid body models are presented and compared in detail. The extracted models compare favorably and their prediction capability is demonstrated in verification results. Approaches to extend the 6 DOF models are addressed and first results are presented. System identification is broadly defined as the deduction of system characteristics from measured data. It provides the only possibility to extract both non-parametric (e.g., frequency responses) and parametric (e.g., state space matrices) aircraft models from flight test data and therefore gives a reliable characterization of the dynamics of the actually existing aircraft. Main applications of system identification are seen in areas where higher accuracies of the mathematical models are required: Simulation validation, control system design (in particular model-following control system design for in-flight simulation), and handling qualities.

Kaletka, Juergen↗
NASA NTRS1990

Formulation and validation of high-order linearized models of helicopter flight mechanics

A high-order linearized model of helicopter flight dynamics is extracted from a nonlinear time domain simulation. The model has 29 states that describe the fuselage rigid body degrees of freedom, the flap and lag dynamics in a nonrotating coordinate system, the inflow dynamics, the delayed entry of the horizontal tail into the main rotor wake, and, approximately, the blade torsion dynamics. The nonlinear simulation is obtained by extensively modifying the GENHEL computer program. The results indicate that the agreement between the linearized and the nonlinear model is good for small perturbations, and deteriorates for large amplitude maneuvers.

Kim, Frederick D.↗