A Drop Test for the Evaluation of the Impact Strength of Cermets
Explore the source record for details and available documents.
Pinkel, B↗
SEARCH · Search NASA
Results for “strength (B)”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
B 4 C-Al Metal Matrix Composites for Extreme Space Environments
Extreme space environments such as space vacuum, radiation, thermal extremes and cycles, jagged lunar dust, microgravity, micrometeoroids and orbit debris (MMOD), thrust plume ejecta, and their synergistically-adverse effects are difficult challenges for safe and sustainable space exploration to outer planets and satellites. Prolonged space radiation exposure embrittles materials and structures and abrasive jagged dust particles aggressively wear and erode moving parts leading to premature failure. To counter or even alleviate such potential failures, robust and exceptional materials are needed to make NASA missions including Artemis program sustainable with minimum service and repair needs. This study reports that boron-containing inclusion, B 4 C, can improve wear resistance and radiation shielding/resistance of aluminum alloy (Al6061) significantly to extend the service life in extreme space environments. With increasing B 4 C inclusions, the tensile strength increased up to 20 vol% at both room temperature and an elevated temperature (200˚C) while thermal conductivity decreased gradually as a function of B 4 C concentration. The neutron shielding effectiveness increased more than 110 times when 50 vol% B 4 C is incorporated in Al6061 when compared with the pristine Al6061. The shielding effectiveness under galactic cosmic rays (GCR) and solar particle events (SPE) was also studied computationally using on-line tool for the assessment of radiation in space (OLTARIS). By adding B 4 C, the adverse effect caused by secondary radiation through the Al6061 matrix was effectively suppressed to improve the shielding effectiveness against GCR and SPE. The presence of boron in B 4 C was the main reason for the enhanced radiation shielding capability against neutron, GCR, and SPE environments.
Sang-Hyon Chu↗
Ultraviolet observations of interstellar extinction near the Cepheus OB3 molecular cloud
New IUE observations and available data for O and B stars new Cep OB3 are presented, and extinction curves for the stars are derived. The differences in those curves are examined in detail, showing that while the level of the far-UV extinction differs greatly throughout the region, the shape of the 2175 A bump does not. The different curves form a family which can be parametrized by the strength of the bump per E(B-V). This suggests that some single physical process dominates the modification of the grains in the region. Evidence is presented which indicates that this process is related to the evolution of the grains once they emerge from the Cep OB3 molecular cloud. The practicality of using the strength of the bump per E(B-V) for dereddening stars in a region where the form of the UV extinction differs from place to place is demonstrated.
Massa, D.↗
Ion heating mechanism in a modified Penning discharge
Ions with Maxwellian energy distributions and kinetic temperatures ranging from 20 eV to 7 keV have been observed in a modified Penning discharge operating in the steady state. Investigation of the plasma revealed two distinct spoke-like concentrations of charge rotating with different velocities in the sheath between the plasma and the anode ring. The faster spoke consists of electrons rotating with the E/B drift velocity, where E is the electric field and B is the magnetic field strength. The slow spoke consists of ions, the thermal velocity of which is observed to be proportional to the spoke velocity. The experimental data are consistent with a model whereby the ion drift velocity in this spoke, corresponding to kilovolt ion energies, is Maxwellianized by strong electrostatic turbulence in the sheath. Theoretical expressions are derived for the frequency of the electron and ion spoke rotation, for the ion kinetic temperature, and for the ion heating efficiency as functions of the discharge parameters. These expressions are shown to be consistent with extensive experimental data.
Roth, J. R.↗
A study of optically contacted quartz at cryogenic temperatures
Optical contacting as a method of joining the quartz components of the instruments for the Gravity Probe-B experiment is evaluated. The strength of the bond between optically contacted fused quartz surfaces at liquid helium temperature was investigated. A test apparatus which can be used for making measurements of the tensile strength of these bonds was designed. Results of the tensile pull tests are given and the reliability of such bonds analyzed.
Payne, L. L.↗
The diffuse interstellar feature at 4430 A and interstellar extinction in the far-ultraviolet
IUE measurements have been obtained for the UV extinction characteristics of 20 reddened stars previously reported to have anomalously high or low A(4430)/E(B-V) ratios, in order to conduct a first statistical study of the correlations between these ratios and interstellar extinction features in the UV. A marginally significant positive correlation is noted between A(4430)/E(B-V) and the normalized strength of the 2175 A extinction jump, but no correlation is found with the total extinction at the wavelength and a marginally negative correlation is found with the extinction rise at 1250 A. The hypothesis that 4430 A diffuse absorption is produced by very small interstellar grains is not supported by the present observations.
Witt, A. N.↗
The stars with H-alpha missing
During the course of a survey for ultraviolet-excess objects, a group of objects were found that spectroscopically resemble the subdwarf B stars, except for variable strength H-alpha absorption. The H-alpha line can have the nominal strength predicted from the other Balmer lines, or it can be completely absent. Observations reveal significant changes in the H-alpha profile on both a night-to-night and month-to-month basis. IUE observations of three stars reveal few features in the ultraviolet region and, when combined with optical data, allow a rough determination of photospheric temperatures. A binary model is proposed for these systems, and the ramifications of the objects found here and in the Palomar-Green survey are discussed.
Downes, Ronald A.↗
Large-scale fluctuations in the solar wind at 1 AU - 1978-1982
The large-scale fluctuations in the strength of the magnetic field B and the bulk speed V at 1 AU were investigated on the basis of hourly averages of IMP 8 and ISEE 3 data compiled by Couzens and King (1986). The power spectra of the intermediate frequency fluctuations in B at 1 AU had the form of a power law with exponent 1.92 + or - 0.06 during the 1978-1982 interval. The contributions of jumps to the spectra of the large-scale fluctuations in B and V were studied for the interval from days 226 to 365, 1978, which is representative of other such intervals. Of the jumps in B, 22 percent have the signature of a forward or reverse shock.
Burlaga, L. F.↗
Nanomechanics of Carbon and CxByNz Nanotubes: Via a Quantum Molecular Dynamics Method
Nanomechanics of single-wall C, BN and BC$_3$ and B doped C nanotubes under axial compression and tension are investigated through a generalized tight-binding molecular dynamics (GTBMD) and {\it ab-initio} electronic structure methods. The dynamic strength of BN, BC$_3$ and B doped C nanotubes for small axial strain are comparable to each other. The main difference is in the critical strain at which structural collapse occurs. For example, even a shallow doping with B lowers the value of critical strain for C nanotubes. The critical strain for BN nanotube is found to be more than that for the similar C nanotube. Once the structural collapse starts to occur we find that carbon nanotubes irreversibly go into plastic deformation regime via the formation of tetrahedral (four-fold coordinated) bonds at the location of sharp pinches or kinks. This finding is considerably different from the classical MD (molecular dynamics) simulation results known so far. The energetics and electronic densities of states of the collapsed structures, investigated with {\it ab-initio) methods, will also be discussed.
Srivastava, Deepak↗
Meteoroid Bulk Density and Ceplecha Types
Determination of asteroid bulk density is an important aspect of NEO characterization, yet difficult to measure. As a fraction of meteoroids originate from asteroids (including some NEOs), a study of meteoroid bulk densities can potentially provide useful insights into the densities of NEOs and PHOs in lieu of mutual perturbations, satellite, or expensive spacecraft missions. NASA's Meteoroid Environment Office characterizes the meteoroid environment for the purpose of spacecraft risk and operations. To accurately determine the risk, a distribution of meteoroid bulk densities are needed. This is not trivial to determine. If the particle survives to the ground the bulk density can be directly measured, however only the most dense particles land on the Earth. The next best approach is to model the meteor's ablation, which is not straightforward. Clear deceleration is necessary to do this and there are discrepancies in results between models. One approach to a distribution of bulk density is to use a measured proxy for the densities, then calibrate the proxy with known densities from meteorite falls, ablation modelling, and other sources. An obvious proxy choice is the Ceplecha type, K(sub B), thought to indicate the strength of a meteoroid. KB is frequented cited as a good proxy for meteoroid densities, but we find it is poorly correlated with density. However, a distinct split by dynamical type was seen with Jovian Tisserand parameter, T(sub J), with meteoroids from Halley Type comets (T(sub J less than 2 ) exhibiting much lower densities than those originating from Jupiter and asteroids (T(sub J greater than 2).
Blaauw, R. C.↗
Processing and Properties of Fiber Reinforced Polymeric Matrix Composites: Processing Robustness of IM7/PETI Polyimide Composites - Part 2
The processability of a phenylethynyl terminated imide (PETI) resin matrix composite was investigated. Unidirectional prepregs were made by coating an N-methylpyrrolidone solution of the amide acid oligomer onto unsized IM7. Two batches of prepregs were used: one was made by NASA in-house, and the other was from an industrial source. The composite processing robustness was investigated with respect to the effect of B-staging conditions, the prepreg shelf life, and the optimal processing window. Rheological measurements indicated that PETI's processability was only slightly affected over a wide range of B-staging temperatures (from 250 C to 300 C). The open hole compression (OHC) strength values were statistically indistinguishable among specimens consolidated using various B-staging conditions. Prepreg rheology and OHC strengths were also found not to be affected by prolonged (i.e., up to 60 days) ambient storage. An optimal processing window was established using response surface methodology. It was found that IM7/PETI composite is more sensitive to the consolidation temperature than to the consolidation pressure. A good consolidation was achievable at 371 C/100 Psi, which yielded an OHC strength of 62 Ksi at room temperature. However, processability declined dramatically at temperatures below 350 C.
Hou, Tan-Hung↗
Studies of Trace Gas Chemical Cycles Using Inverse Methods and Global Chemical Transport Models
We report progress in the first year, and summarize proposed work for the second year of the three-year dynamical-chemical modeling project devoted to: (a) development, testing, and refining of inverse methods for determining regional and global transient source and sink strengths for long lived gases important in ozone depletion and climate forcing, (b) utilization of inverse methods to determine these source/sink strengths using either MATCH (Model for Atmospheric Transport and Chemistry) which is based on analyzed observed wind fields or back-trajectories computed from these wind fields, (c) determination of global (and perhaps regional) average hydroxyl radical concentrations using inverse methods with multiple titrating gases, and (d) computation of the lifetimes and spatially resolved destruction rates of trace gases using 3D models. Important goals include determination of regional source strengths of methane, nitrous oxide, methyl bromide, and other climatically and chemically important biogenic/anthropogenic trace gases and also of halocarbons restricted by the Montreal protocol and its follow-on agreements and hydrohalocarbons now used as alternatives to the restricted halocarbons.
Prinn, Ronald G.↗
Microstructural and Creep Properties of Boron- and Zirconium-Containing Cobalt-Based Superalloys
The effects of micro-additions of boron and zirconium on grain-boundary (GB) structure and strength inpolycrystalline γ(f.c.c.) plus γ’(L12) strengthened Co-9.5Al-7.5W-X at. % alloys (X=0-Ternary, 0.05B, 0.01B,0.05Zr, and 0.005B-0.05Zr at. %) are studied. Creep tests performed at 850 °C demonstrate that GB strength and cohesion limit the creep resistance and ductility of the ternary B- and Zr-free alloy due to intergranular fracture. Alloys with 0.05B and 0.005B-0.05Zr both exhibit improved creep strength due to enhanced GB cohesion,compared to the baseline ternary Co-9.5Al-7.5W alloy, but alloys containing 0.01B or 0.05Zr additions displayed no benefit. Atom-probe tomography (APT) is utilized to measure GB segregation, where B and Zr are demonstrated to segregate at GBs. A Gibbsian interfacial excess of 5.57 ± 1.04 atoms nm(exp) -2 was found for B at aGB in the 0.01B alloy and 2.88 ± 0.81 and 2.40 ± 0.84 atoms nm2 for B and Zr, respectively, for the 0.005B-0.05Zr alloy. The GBs in the highest B-containing (0.05B) alloy exhibit micrometer-sized boride precipitates with adjacent precipitate denuded-zones (PDZs), whereas secondary precipitation at the GBs is absent in theother four alloys. The 0.05B alloy has the smallest room temperature yield strength, by 6%, which is attributedto the PDZs, but it exhibits the largest increase in creep strength (with an ~2.5 order of magnitude decrease inthe minimum strain rate for a given stress at 850 °C) over the baseline Co-9.5Al-7.5W alloy.
Creep↗
Optical region elemental abundance analyses of B and A stars. IV - Re-evaluation with new critically compiled Fe II oscillator strengths and improved estimates of the damping constants
A new critical compilation of Fe II f-values has recently been completed by Martin et al. To see how these values affect the derived stellar abundances both directly in changing the values of log Fe/H for individual lines and through the determination of the microturbulent velocities, the data for 11 (six normal and five slightly peculiar) sharp-lined B and A stars have been reanalyzed. At the same time, the choice of line damping constants has been investigated, especially for Fe I and Fe II lines.
Adelman, S. J.↗
An oxide dispersion strengthened alloy for gas turbine blades
The strength of the newly developed alloy MA-6000E is derived from a nickel alloy base, an elongated grain structure, naturally occurring precipitates of gamma prime, and an artificial distribution of extremely fine, stable oxide particles. Its composition is Ni-15Cr-2Mo-2Ta-4W-4.5Al-2.5Ti-0.15Zr 0.05C-0.01B-1.1Y2O3. It exhibits the strength of a conventional nickel-base alloy at 1400 F but is quite superior at 2000 F. Its shear strength is relatively low, necessitating consideration of special joining procedures. Its high cycle, low cycle, and thermal fatigue properties are excellent. The relationship between alloy microstructure and properties is discussed.
Glasgow, T. K.↗
Ultraviolet interstellar extinction toward stars in the Orion Nebula and toward HD 147889
The International Ultraviolet Explorer (IUE) was used to obtain low resolution absolute ultraviolet energy distributions for the four Trapezium stars Theta(1) Orionis A, B, C, and D, Theta(2) Orionis A and B, HD 147889, and several unreddened standard stars. The observations for Theta(1) Orionis B reveal a peculiar extended object. The measurements for the rest of the stars were used to derive UV extinction curves. The derived curves are very different from the average galactic curve. The curves for the Orion stars all exhibit smaller than normal middle and far-UV extinctions. Although a 2175 A feature is present, its strength, when normalized to E(B-V), is smaller than in the average galactic curve. In contrast, the curve for HD 147889 has a pronounced 2175 A feature followed by smaller than normal extinction for an inverse wavelength between 5 and 7 per micron.
Bohlin, R. C.↗
Astronautic Structures Manual, Volume 3
This document (Volumes I, II, and III) presents a compilation of industry-wide methods in aerospace strength analysis that can be carried out by hand, that are general enough in scope to cover most structures encountered, and that are sophisticated enough to give accurate estimates of the actual strength expected. It provides analysis techniques for the elastic and inelastic stress ranges. It serves not only as a catalog of methods not usually available, but also as a reference source for the background of the methods themselves. An overview of the manual is as follows: Section A is a general introduction of methods used and includes sections on loads, combined stresses, and interaction curves; Section B is devoted to methods of strength analysis; Section C is devoted to the topic of structural stability; Section D is on thermal stresses; Section E is on fatigue and fracture mechanics; Section F is on composites; Section G is on rotating machinery; and Section H is on statistics. These three volumes supersede Volumes I and II, NASA TM X-60041 and NASA TM X-60042, respectively.
Source record↗
An unusual absorption feature in the far ultraviolet spectrum of early type supergiants
The OAO-2 satellite has been used to obtain far ultraviolet scans of six early-type supergiants. The data reveal the presence of a distinct, broad absorption feature centered near 1720 A. This feature is unique in that it remains essentially constant in strength, breadth and central position over the spectral type range B0 I to A2 I. The feature also appears in the spectrum of the B-type shell star beta Tauri, with a strength comparable to that observed for the supergiants. It appears weakly, or not at all, in the B and A main sequence spectra we have examined. The hypothesis that the feature is due to a fortuitous blend of intrinsically strong lines arising primarily from the ground configurations of abundant metallic ions is discussed in detail.
Underhill, A. B.↗