Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

First-principles study of structural stability, electronic, optical and elastic properties of binary intermetallic: PtZr

Structural, electronic, optical and elastic properties of PtZr have been studied using the full-potential linearized augmented plane wave (FP-LAPW) method within density functional theory (DFT). The energy against volume and enthalpy vs. pressure variation in three different structures i.e. B{sub 1}, B{sub 2} and B{sub 3} for PtZr has been presented. The equilibrium lattice parameter, bulk modulus and its pressure derivative have been obtained using optimization method for all the three phases. Furthermore, electronic structure was discussed to reveal the metallic character of the present compound. The linear optical properties are also studied under zero pressure for the first time. Results on elastic properties are obtained using generalized gradient approximation (GGA) for exchange correlation potentials. Ductile nature of PtZr compound is predicted in accordance with Pugh’s criteria.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural Stability of Graphene-Supported Pt Layers: Diffusion Monte Carlo and Density Functional Theory Calculations

In this study, we used a combination of diffusion Monte Carlo and density functional theory calculations to investigate the stability and interlayer binding of various layered structures of Pt atoms adsorbed on graphene. Our findings show that vertically buckled Pt monolayer and bilayer with (111)-packing order are more energetically favorable than the corresponding buckled (100) or flat (100)-packing structures. This can be attributed to the significant lattice mismatch (>10%) between pristine graphene and a free-standing (100)-packing Pt layer. Additionally, our calculations reveal that among the (100)-packing Pt layers, an incommensurate structure with a Pt/C atomic ratio less than 1/2 may be more stable than the commensurate structures registered at the bridge sites, which aligns with recent experimental findings of incommensurate (100)-packing Pt layers on graphene. The interlayer binding between the Pt layer and graphene is found to be primarily driven by van der Waals interaction, except for the AA-stacked buckled-(100) Pt bilayer where the bottom Pt atoms show chemisorption to the graphene surface. In conclusion, this research offers a comprehensive examination of the stability and interlayer binding of metallic Pt layers, providing valuable insights for potential applications as a next-generation catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural stability and artificial buckling modes in topology optimization

Abstract This paper demonstrates how a strain energy transition approach can be used to remove artificial buckling modes that often occur in stability constrained topology optimization problems. To simulate the structural response, a nonlinear large deformation hyperelastic simulation is performed, wherein the fundamental load path is traversed using Newton’s method and the critical buckling load levels are estimated by an eigenvalue analysis. The goal of the optimization is to minimize displacement, subject to constraints on the lowest critical buckling loads and maximum volume. The topology optimization problem is regularized via the Helmholtz PDE-filter and the method of moving asymptotes is used to update the design. The stability and sensitivity analyses are outlined in detail. The effectiveness of the energy transition scheme is demonstrated in numerical examples.

Dalklint, Anna (ORCID:0000000346195205)↗

Reinforcement Learning of Structured Stabilizing Control for Linear Systems With Unknown State Matrix

This paper delves into designing feedback control gains for a continuous-time linear quadratic regulator (LQR) problem that is constrained to certain predefined structure with unknown state matrix. We bring forth the ideas from reinforcement learning (RL) in conjunction with sufficient stability and performance guarantees in order to design these structured gains using the trajectory measurements of states and controls. Here we first formulate a model-based framework using dynamic programming (DP) to embed the structural constraint to the LQR gain computation in the continuous-time setting, and then subsequently, formulate a policy iteration RL algorithm that can alleviate the requirement of known state matrix in conjunction with maintaining the feedback gain structure. The design enables a distributed learning control design which is necessary for many large-scale cyber-physical systems. Theoretical guarantees are provided for stability and convergence of the structured reinforcement learning (SRL) algorithm. We validate our theoretical results with numerical simulations on a multi-agent networked linear time-invariant (LTI) dynamic system.

42 ENGINEERING↗

Role of Histone Tails in Structural Stability of the Nucleosome

Histone tails play an important role in nucleosome structure and dynamics. Here we investigate the effect of truncation of histone tails H3, H4, H2A and H2B on nucleosome structure with 100 ns all-atom molecular dynamics simulations. Tail domains of H3 and H2B show propensity of α-helics formation during the intact nucleosome simulation. On truncation of H4 or H2B tails no structural change occurs in histones. However, H3 or H2A tail truncation results in structural alterations in the histone core domain, and in both the cases the structural change occurs in the H2Aα3 domain. We also find that the contacts between the histone H2A C terminal docking domain and surrounding residues are destabilized upon H3 tail truncation. The relation between the present observations and corresponding experiments is discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Interplay Between Membrane Composition and Structural Stability of Membrane-Bound hIAPP

Amyloid aggregates are characteristic of many serious diseases such as Alzheimer’s disease, Parkinson’s, and type 2 diabetes and commonly involve intrinsically disordered proteins (IDPs), those that populate an ensemble of conformations rather than a single folded structure. Human islet amyloid polypeptide (hIAPP or amylin) is an amyloidogenic IDP implicated in pancreatic β-cell death during the pathogenesis of type 2 diabetes. The target of amylin’s toxic activity is thought to be the cell’s lipid membrane, which may also act as a catalyst for aggregation. Since amylin is intrinsically disordered, differing environments can have a large impact on its equilibrium conformational ensemble. We apply atomistic molecular dynamics simulations on multiple systems containing a full-length amylin monomer and a lipid bilayer to study the changes induced by the membrane. Here, we observe stabilized helical conformations structurally similar to those determined by NMR experiments conducted in similar environments. We also find that bilayers of different compositions result in greatly different equilibrium ensembles of amylin. Finally, we discuss how a mixed bilayer containing zwitterionic and anionic lipid headgroups can allow for greater preference toward conformations which are adsorbed below the membrane surface through rearrangement of lipids for more favorable protein–lipid interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Charge Sequence Pattern and Lysine-to-Arginine Substitution on the Structural Stability of Bioinspired Polyampholytes

A comprehensive study focusing on the combined influence of the charge sequence pattern and the type of positively charged amino acids on the formation of secondary structures in sequence-specific polyampholytes is presented. The sequences of interest consisting exclusively of ionizable amino acids (lysine, K; arginine, R; and glutamic acid, E) are (EKEK) 5 , (EKKE) 5 , (ERER) 5 , (ERRE) 5 , and (EKER) 5 . The stability of the secondary structure was examined at three pH values in the presence of urea and NaCl. The results presented here underscore the combined prominent effects of the charge sequence pattern and the type of positively charged monomers on secondary structure formation. Additionally, (ERRE) 5 readily aggregated across a wide range of pH. In contrast, sequences with the same charge pattern, (EKKE) 5 , as well as the sequences with the equivalent amino acid content, (ERER) 5 , exhibited no aggregate formation under equivalent pH and concentration conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of pressure and temperature on structural stability of potential hydrogen storage compound Li[subscript 3]AlH[subscript 6]

The crystal structure of Li{sub 3}AlH{sub 6} was investigated at high pressures upto 27 GPa using a diamond anvil cell with synchrotron radiation in addition to high temperature X-ray diffraction. Density functional theoretical (DFT) calculations were performed simultaneously. While the structure of Li{sub 3}AlH{sub 6} is stable on increasing temperature, the results of high pressure experiments show a pressure induced phase transition from the ambient R {bar 3} phase to a high pressure cubic Ia{bar 3} phase around 10.6 GPa. The transition pressure of 10.6 GPa and the bulk modulus value B{sub 0} = 32(2) GPa for the R{bar 3} phase obtained are in good agreement with the theoretical results.

08 HYDROGEN↗

Monte Carlo analysis of critical phenomenon of the Ising model on memory stabilizer structures

We calculate the critical temperature of the Ising model on a set of graphs representing a concatenated three-bit error-correction code. The graphs are derived from the stabilizer formalism used in quantum error correction. The stabilizer for a subspace is defined as the group of Pauli operators whose eigenvalues are +1 on the subspace. The group can be generated by a subset of operators in the stabilizer, and the choice of generators determines the structure of the graph. The Wolff algorithm, together with the histogram method and finite-size scaling, is used to calculate both the critical temperature and the critical exponents of each structure. The simulations show that the choice of stabilizer generators, both the number and the geometry, has a large effect on the critical temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure, stability, and superconductivity of N-doped lutetium hydrides at kbar pressures

Here, the structure of the material responsible for the room temperature and near ambient pressure superconductivity reported in an N-doped lutetium hydride has not been conclusively determined. Herein, density functional theory calculations are performed in an attempt to uncover what it might be. Guided by a range of strategies including crystal structure prediction and modifications of existing structure types, we present an array of Lu-N-H phases that are dynamically stable at experimentally relevant pressures. Although none of the structures found are thermodynamically stable, and none are expected to remain superconducting above ~17 K at 10 kbar, a number of metallic compounds with fcc Lu lattices – as suggested by the experimental X-ray diffraction measurements of the majority phase – are identified. The system whose calculated equation of states matches best with that measured for the majority phase is fluorite-type LuH 2 , whose 10 kbar superconducting critical temperature was estimated to be 0.1 K using the Allen-Dynes modified McMillan equation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stability, structural and electronic properties of benzene molecule adsorbed on free standing Au layer

We report stability and electronic properties of benzene molecule adsorbed on the Au atomic layer within the framework of density function theory (DFT). Horizontal configuration of benzene on the top site of Au monolayer prefers energetically over other studied configurations. On the adsorption of benzene, the ballistic conductance of Au monolayer is found to decrease from 4G{sub 0} to 2G{sub 0} suggesting its applications for the fabrications of organic sensor devices based on the Au atomic layers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of structural stability and elastic properties of Zrh and Zrh{sub 2}: A first principles study

The electronic, structural and mechanical properties of ZrH and ZrH{sub 2} are investigated by means of first principles calculation based on density functional theory as implemented in VASP code with generalized gradient approximation. The calculated ground state properties are in good agreement with previous experimental and other theoretical results. Among the six crystallographic structures considered for ZrH, ZB phase is found to be the most stable phase, whereas ZrH{sub 2} is energetically stable in tetragonal structure at ambient condition. A structural phase transition from ZB→NaCl at a pressure 10 GPa is predicted for ZrH.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and structural stability of blue SrO:Eu{sup 2+} phosphor

Chemical stability of 6-coodinated SrO is a fundamental problem when this is used for various applications. In this study, optical and chemical stabilities of 8-coordinated SrO:Eu{sup 2+} phosphor were investigated. SrO:Eu{sup 2+} phosphor was synthesized from thermal treatment of SrO:Eu powder located on a single crystalline MgO at 1500° C under reduction atmosphere. Obtained 8-coordinated SrO:Eu{sup 2+} phosphor exhibit strong blue luminescence and chemical stability in distilled water for 3 days. Our findings prove that obtained 8-coordinated SrO:Eu{sup 2+} possesses relative optical and chemical stabilities in water. - Graphical abstract: Obtained 8-coordinated SrO:Eu{sup 2+} phosphor exhibit strong blue luminescence in distilled water. Highlights: • We investigated optical and chemical stabilities of 8-coordinated SrO:Eu{sup 2+} phosphor in water. • Obtained 8-coordinated SrO:Eu{sup 2+} phosphor exhibit strong blue luminescence and chemical stability in distilled water for 3 days. • We found that the 8-coodrodinated SrO crystal structure changed to SrCO{sub 3} crystal structure after the 5 days immersion. • The obtained SrO:Eu{sup 2+} phosphor possesses high chemical stability under water, compared with commercial (6-coordinated) SrO.

36 MATERIALS SCIENCE↗

Chemical and Structural Stability of Lithium-Ion Battery Electrode Materials under Electron Beam

Our investigation of chemical and structural dynamics in battery materials is essential to elucidation of structure-property relationships for rational design of advanced battery materials. Spatially resolved techniques, such as scanning/transmission electron microscopy (S/TEM), are widely applied to address this challenge. But, battery materials are susceptible to electron beam damage, complicating the data interpretation. In this study, we demonstrate that, under electron beam irradiation, the surface and bulk of battery materials undergo chemical and structural evolution equivalent to that observed during charge-discharge cycling. In a lithiated NiO nanosheet, a Li2CO3-containing surface reaction layer (SRL) was gradually decomposed during electron energy loss spectroscopy (EELS) acquisition. For cycled LiNi 0.4 Mn 0.4 Co 0.18 Ti 0.02 O 2 particles, repeated electron beam irradiation induced a phase transition from an R$\bar{3}$m layered structure to an rock-salt structure, which is attributed to the stoichiometric lithium and oxygen removal from R$\bar{3}$m 3a and 6c sites, respectively. Nevertheless, it is still feasible to preserve pristine chemical environments by minimizing electron beam damage, for example, in using fast electron imaging and spectroscopy. Finally, the present study provides examples of electron beam damage on lithium-ion battery materials and suggests that special attention is necessary to prevent misinterpretation of experimental results.

25 ENERGY STORAGE↗

First-principles calculation of the structural stability of 6d transition metals

The phase stability of the 6d transition metals (elements 103-111) is investigated using first-principles electronic-structure calculations. Comparison with the lighter transition metals reveals that the structural sequence trend is broken at the end of the 6d series. To account for this anomalous behavior, the effect of relativity on the lattice stability is scrutinized, taking different approximations into consideration. It is found that the mass-velocity and Darwin terms give important contributions to the electronic structure, leading to changes in the interstitial charge density and, thus, in the structural energy difference.

74 ATOMIC AND MOLECULAR PHYSICS↗

Phase stability, structures and properties of the (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} natural superlattices

The phase stability of the (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} natural superlattices has been investigated through the low temperature solid state synthesis of a number of new binary Bi{sub x}Te{sub 1-x} compositions. Powder X-ray diffraction revealed that an infinitely adaptive series forms for 0.44{<=}x{<=}0.70, while an unusual 2-phase region with continuously changing compositions is observed for 0.41{<=}x{<=}0.43. For x>0.70, mixtures of elemental Bi and an almost constant composition (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} phase are observed. Rietveld analysis of synchrotron X-ray powder diffraction data collected on Bi{sub 2}Te (m=2, n=1) revealed substantial interchange of Bi and Te between Bi{sub 2} and Bi{sub 2}Te{sub 3} blocks, demonstrating that the block compositions are variable. All investigated phase pure compositions are degenerate semiconductors with low residual resistivity ratios and moderate positive magnetoresistances (R/R{sub 0}=1.05 in 9 T). The maximum Seebeck coefficient is +80 {mu}V K{sup -1} for x=0.63, leading to an estimated thermoelectric figure of merit, zT=0.2 at 250 K. - Graphical abstract: An infinite number of possible (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} structures exist for Bi{sub x}Te{sub 1-x} compositions between x=0.44 and x=0.70. Compositions near x=2/3 are promising p-type thermoelectrics. Highlights: Black-Right-Pointing-Pointer Phase Stability of the (Bi{sub 2}){sub m}{center_dot}(Bi{sub 2}Te{sub 3}){sub n} Natural Superlattices. Black-Right-Pointing-Pointer Thermoelectric Properties in the Bi{sub x}Te{sub 1-x} Phase Diagram. Black-Right-Pointing-Pointer Crystal Structure of Bi{sub 2}Te from Synchrotron X-ray Powder Diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab Initio Investigation of Structural Stability and Electronic and Magnetic Properties of the Half-Heusler Alloys: MTiSb (M = Fe, Co, and Ni)

The structural, electronic, and magnetic properties of the half-Heusler MTiSb (M = Fe, Co, Ni) compounds have been examined using the first-principles calculations with the full-potential linear augmented plane wave (FP-LAPW) method within the density functional theory. The electronic structures and magnetic properties of MTiSb (M = Fe, Co, Ni) are studied. It is found that the calculated lattice parameter is in good agreement with the theoretical values. Using the general gradient approximation (GGA), we observe that for the three compounds, the α phase is more stable than β and γ phases. CoTiSb is a semiconductor, NiTiSb is a metal, while the FeTiSb compound is a half-metallic, and the total magnetic moments are 0.00085, − 0.26074, and 0.99353 μ B, respectively, which is in agreement with the Slater–Pauling rule, Furthermore, the origin for the appearance of the half-metallic band gap in the FeTiSb compound was also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of iron structure stability in high temperature molten lead-bismuth eutectic with oxygen injection using molecular dynamics simulation

Corrosion of structural materials in high temperature molten lead-bismuth eutectic is a major problem for design of PbBi cooled reactor. One technique to inhibit corrosion process is to inject oxygen into coolant. In this paper we study and focus on a way of inhibiting the corrosion of iron using molecular dynamics method. For the simulation results we concluded that effective corrosion inhibition of iron may be achieved by injection 0.0532 wt% to 0.1156 wt% oxygen into liquid lead-bismuth. At this oxygen concentration the structure of iron material will be maintained at about 70% in bcc crystal structure during interaction with liquid metal.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗