Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

First-principles calculation of the structural stability of 6d transition metals

The phase stability of the 6d transition metals (elements 103-111) is investigated using first-principles electronic-structure calculations. Comparison with the lighter transition metals reveals that the structural sequence trend is broken at the end of the 6d series. To account for this anomalous behavior, the effect of relativity on the lattice stability is scrutinized, taking different approximations into consideration. It is found that the mass-velocity and Darwin terms give important contributions to the electronic structure, leading to changes in the interstitial charge density and, thus, in the structural energy difference.

74 ATOMIC AND MOLECULAR PHYSICS↗

Phase stability, structures and properties of the (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} natural superlattices

The phase stability of the (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} natural superlattices has been investigated through the low temperature solid state synthesis of a number of new binary Bi{sub x}Te{sub 1-x} compositions. Powder X-ray diffraction revealed that an infinitely adaptive series forms for 0.44{<=}x{<=}0.70, while an unusual 2-phase region with continuously changing compositions is observed for 0.41{<=}x{<=}0.43. For x>0.70, mixtures of elemental Bi and an almost constant composition (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} phase are observed. Rietveld analysis of synchrotron X-ray powder diffraction data collected on Bi{sub 2}Te (m=2, n=1) revealed substantial interchange of Bi and Te between Bi{sub 2} and Bi{sub 2}Te{sub 3} blocks, demonstrating that the block compositions are variable. All investigated phase pure compositions are degenerate semiconductors with low residual resistivity ratios and moderate positive magnetoresistances (R/R{sub 0}=1.05 in 9 T). The maximum Seebeck coefficient is +80 {mu}V K{sup -1} for x=0.63, leading to an estimated thermoelectric figure of merit, zT=0.2 at 250 K. - Graphical abstract: An infinite number of possible (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} structures exist for Bi{sub x}Te{sub 1-x} compositions between x=0.44 and x=0.70. Compositions near x=2/3 are promising p-type thermoelectrics. Highlights: Black-Right-Pointing-Pointer Phase Stability of the (Bi{sub 2}){sub m}{center_dot}(Bi{sub 2}Te{sub 3}){sub n} Natural Superlattices. Black-Right-Pointing-Pointer Thermoelectric Properties in the Bi{sub x}Te{sub 1-x} Phase Diagram. Black-Right-Pointing-Pointer Crystal Structure of Bi{sub 2}Te from Synchrotron X-ray Powder Diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab Initio Investigation of Structural Stability and Electronic and Magnetic Properties of the Half-Heusler Alloys: MTiSb (M = Fe, Co, and Ni)

The structural, electronic, and magnetic properties of the half-Heusler MTiSb (M = Fe, Co, Ni) compounds have been examined using the first-principles calculations with the full-potential linear augmented plane wave (FP-LAPW) method within the density functional theory. The electronic structures and magnetic properties of MTiSb (M = Fe, Co, Ni) are studied. It is found that the calculated lattice parameter is in good agreement with the theoretical values. Using the general gradient approximation (GGA), we observe that for the three compounds, the α phase is more stable than β and γ phases. CoTiSb is a semiconductor, NiTiSb is a metal, while the FeTiSb compound is a half-metallic, and the total magnetic moments are 0.00085, − 0.26074, and 0.99353 μ B, respectively, which is in agreement with the Slater–Pauling rule, Furthermore, the origin for the appearance of the half-metallic band gap in the FeTiSb compound was also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of iron structure stability in high temperature molten lead-bismuth eutectic with oxygen injection using molecular dynamics simulation

Corrosion of structural materials in high temperature molten lead-bismuth eutectic is a major problem for design of PbBi cooled reactor. One technique to inhibit corrosion process is to inject oxygen into coolant. In this paper we study and focus on a way of inhibiting the corrosion of iron using molecular dynamics method. For the simulation results we concluded that effective corrosion inhibition of iron may be achieved by injection 0.0532 wt% to 0.1156 wt% oxygen into liquid lead-bismuth. At this oxygen concentration the structure of iron material will be maintained at about 70% in bcc crystal structure during interaction with liquid metal.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Enhanced structural stability of nanoporous zirconia under irradiation of He

This work reports a greatly enhanced tolerance for He irradiation-induced swelling in nanocrystalline zirconia film with interconnected nanoporous structure (hereinafter referred as to NC-C). Compared to bulk yttria-stabilized zirconia (YSZ) and another nanocrystalline zirconia film only with discrete nano voids (hereinafter referred as to NC-V), the NC-C film reveals good tolerance for irradiation of high-fluence He. No appreciable surface blistering can be found even at the highest fluence of 6 1017 cm2 in NCC film. From TEM analysis of as-irradiated samples, the enhanced tolerance for volume swelling in NCC film is attributed to the enhanced diffusion mechanism of deposited He via widely distributed nano channels. Furthermore, the growth of grain size is quite small for both nanocrystalline zirconia films after irradiation, which is ascribed to the decreasing of area of grain boundary due to loose structure and low energy of primary knock-on atoms for He ions.

Yang, Tengfei↗

Structure, Stability, and Mobility of Small Pd Clusters on the Stoichiometric and Defective TiO2 (110) Surfaces

We report on the structure and adsorption properties of Pdn (n = 1–4) clusters supported on the rutile TiO2 (110) surfaces with the possible presence of a surface oxygen vacancy or a subsurface Ti-interstitial atom. As predicted by the density functional theory, small Pd clusters prefer to bind to the stoichiometric titania surface or at sites near subsurface Ti-interstitial atoms. The adsorption of Pd clusters changes the electronic structure of the underlying surface. For the surface with an oxygen vacancy, the charge localization and ferromagnetic spin states are found to be largely attenuated owing to the adsorption of Pd clusters. The potential energy surfaces of the Pd monomer on different types of surfaces are also reported. The process of sintering is then simulated via the Metropolis Monte Carlo method. The presence of oxygen vacancy likely leads to the dissociation of Pd clusters. On the stoichiometric surface or surface with Ti-interstitial atom, the Pd monomers tend to sinter into larger clusters, whereas the Pd dimer, trimer, and tetramer appear to be relatively stable below 600 K. This result agrees with the standard sintering model of transition metal clusters and experimental observations.

Environmental Molecular Sciences Laboratory↗

Few-Layer to Multilayer Germanium(II) Sulfide: Synthesis, Structure, Stability, and Optoelectronics

Among 2D/layered semiconductors, group IV monochalcogenides such as SnS(e) and GeS(e) have attracted attention as phosphorene/black phosphorus analogues with anisotropic structures and predicted unusual properties. In contrast to SnS, for which bottom-up synthesis has been reported, few-layer GeS has been realized primarily via exfoliation from bulk crystals. Here, we report the synthesis of large (up to >20 μm), faceted single crystalline GeS flakes with anisotropic properties using a vapor transport process. In situ electron microscopy is used to identify the thermal stability and sublimation pathways, and demonstrates that the GeS flakes are self-encapsulated in a thin, sulfur-rich amorphous GeS x shell during growth. Here, the shell provides exceptional chemical stability to the layered GeS core. In contrast to exfoliated GeS, which rapidly degrades during exposure to air, the synthesized GeS–GeS x core–shell structures show no signs of chemical attack and remain unchanged in air for extended time periods. Measurements of the optoelectronic properties by photoluminescence spectroscopy show a tunable bandgap due to out-of-plane quantum confinement in flakes with thickness below 100 nm. Cathodoluminescence (CL) spectroscopy with nanoscale excitation provides evidence for interfacial charge transfer due to a type II heterojunction between the crystalline core and amorphous shell. Measurements by locally excited CL yield a minority carrier (electron) diffusion length in the p-type GeS core l diff = 0.27 μm, on par with diffusion lengths in the highest-quality layered chalcogenide semiconductors.

42 ENGINEERING↗

Structure, stability, and dissociation of small ionic silicon oxide clusters [SiO{sub n}{sup +}(n = 3, 4)]: Insight from density functional and topological exploration

The structures, energies, isomerization, and decomposition pathways of small ionic silicon oxide clusters, SiO{sub n}{sup +} (n = 3, 4), on doublet and quartet energy surfaces are investigated by density functional theory. New structural isomers of these ionic clusters have been obtained with this systematic study. The energy ordering of the isomeric cluster ions on doublet spin surface is found to follow the same general trend as that of the neutral ones, while it differs on the quartet surface. Our computational results reveal the energetically most preferred decomposition pathways of the ionic clusters on both spin surfaces. To comprehend the reaction mechanism, bonding evolution theory has also been employed using atoms in molecules formalism. The possible reasons behind the structural deformation of some isomers on quartet surface have also been addressed. Our results are expected to provide important insight into the decomposition mechanism and relative stability of the SiO{sub n}{sup +} clusters on both the energy surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Weak ferromagnetism and nanodimensional ferroelectric domain structure stabilized in the polar phase of Bi{sub 1−x}Nd{sub x}FeO{sub 3} multiferroics via Ti doping

Crystal structure, microstructure, local ferroelectric, and magnetic properties of the Bi{sub 0.9}Nd{sub 0.1}Fe{sub 1−x}Ti{sub x}O{sub 3} samples have been investigated at room temperature to reveal the effect of Ti{sup 4+} doping on the multiferroic behavior of the lanthanide-modified compound representing a polar (space group R3c) antiferromagnetic phase of the Bi{sub 1−x}Ln{sub x}FeO{sub 3} perovskites. Ti doping results in a gradual suppression of the rhombohedral distortions, however, symmetry of the crystal structure remains the same in the entire concentration range allowing the single-phase perovskites to be obtained (x ≤ 0.08). The doping tends to reduce existing lone-pair cation-driven polar displacements, thus giving rise to a decrease of the ferroelectric polarization in the Bi{sub 0.9}Nd{sub 0.1}Fe{sub 1−x}Ti{sub x}O{sub 3} (x→0.08) series. A drastic (from ∼10 μm for x = 0 to ∼1 μm for 0.02 ≤ x ≤ 0.08) decrease of the average grain size induced by the doping is accompanied by the formation of a ferroelectric domain structure with the average domain width of ∼40 nm. Finally, the doping was shown to induce an antiferromagnetic to weak ferromagnetic transformation. The maximum remanent magnetization observed in the Bi{sub 0.9}Nd{sub 0.1}Fe{sub 1−x}Ti{sub x}O{sub 3} series at x ∼ 0.05 coincides with the locked magnetization releasing upon the magnetic field-induced suppression of the magnetic cycloid in pure BiFeO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural stability and electronic properties of β-tetragonal boron: A first-principles study

It is known that elemental boron has five polymorphs: α- and β-rhombohedral, α- and β-tetragonal, and the high-pressure γ phase. β-tetragonal (β-t) boron was first discovered in 1960, but there have been only a few studies since then. We have thoroughly investigated, using first-principles calculations, the atomic and electronic structures of β-t boron, the details of which were not known previously. The difficulty of calculation arises from the fact that β-t boron has a large unit cell that contains between 184 and 196 atoms, with 12 partially-occupied interstitial sites. This makes the number of configurations of interstitial atoms too great to calculate them all. By introducing assumptions based on symmetry and preliminary calculations, the number of configurations to calculate can be greatly reduced. It was eventually found that β-t boron has the lowest total energy, with 192 atoms (8 interstitial atoms) in an orthorhombic lattice. The total energy per atom was between those of α- and β-rhombohedral boron. Another tetragonal structure with 192 atoms was found to have a very close energy. The valence bands were fully filled and the gaps were about 1.16 to 1.54 eV, making it comparable to that of β-rhombohedral boron. - Graphical abstract: Electronic density distribution for the lowest-energy configuration (N=192) viewed from the 〈1 0 0〉 direction. Left: isosurface (yellow) at d=0.09 electrons/a.u.{sup 3} Right: isosurface (orange) at d=0.12 electrons/a.u.{sup 3}. - Highlights: • β-tetragonal boron was thoroughly investigated using first-principles calculations. • The lowest energy structure contains 192 atoms in an orthorhombic lattice. • Another tetragonal structure with 192 atoms has a very close energy. • The total energy per atom is between those of α- and β-rhombohedral boron. • The band gap of the lowest energy structure is about 1.16 to 1.54 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure, stability, and superconductivity of new Xe–H compounds under high pressure

Application of high pressure can substantially enhance the chemical reactivity of xenon and has recently extended the Xe-compounds to unexpected elements such as Fe and H. Using unbiased structure searching techniques combined with first-principles calculations, we predict novel compounds of stable XeH{sub 2} and XeH{sub 4}, and metastable XeH, XeH{sub 3}, XeH{sub 5}, XeH{sub 6}, XeH{sub 7}, and XeH{sub 8} under high pressure. Rather than van der Waals complexes, these are weakly covalent or ionic compounds stabilized by a pressure-induced increase in charge transfer from Xe to H atoms. The calculated electronic structures with hybrid exchange-correlation functionals reveal that only XeH and XeH{sub 2} are metalized under 300 GPa. For the metallic XeH and XeH{sub 2} at certain pressures, the superconducting critical temperatures are finally studied, by using Allen-Dynes modified McMillan equation combined with the calculated electron-phonon coupling parameter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal and structural stability of medium energy target carrier assembly for NOvA at Fermilab

The NOvA project will upgrade the existing Neutrino at Main Injector (NuMI) project beamline at Fermilab to accommodate beam power of 700 kW. The Medium Energy (ME) graphite target assembly is provided through an accord with the State Research Center of Russia Institute for High Energy Physics (IHEP) at Protvino, Russia. The effects of proton beam energy deposition within beamline components are considered as thermal stability of the target carrier assembly and alignment budget are critical operational issues. Results of finite element thermal and structural analysis involving the target carrier assembly is provided with detail regarding the target's beryllium windows.

43 PARTICLE ACCELERATORS↗

Surface and Structural Stabilities of Carbon Additives in High Voltage Lithium Ion Batteries

Several different carbons have been systematically investigated in high voltage lithium ion batteries. It was founded that the higher surface area, the more parasitic reactions initiating from different onset voltages. A closer inspection reveals that for the low surface area carbon such as Super P, PF6- ions intercalate into carbon structure above 4.7 V contributing partial capacity. For high surface area carbon, in addition to the electrolyte decomposition, the oxidation of functional groups at high voltage further increases the irreversible capacities and Li+ ion consumption. Coulombic efficiency, reversible capacity and cycling stability observed by using different carbon additives are successfully correlated with their structure and surface chemistry providing information for predictive selection of carbons in different energy storage systems.

25 ENERGY STORAGE↗

Structural stability of the Li-ion conductor Li7La3Zr2O12 investigated by high-pressure in-situ X-ray diffraction and Raman spectroscopy

Highlights: • Lithium ion conductor of Garnet-related-type structure Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}. • Conversion(M.E.) • High-pressure behavior of Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} is investigated up to 70 GPa. • High pressure in-situ X-ray diffraction measurements and Raman spectroscopy. • Tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} transforms to high-pressure cubic one under high pressure. - Abstract: The high-pressure behavior of Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} (LLZO) with a garnet-related structure has been investigated for the first time by high pressure in situ X-ray diffraction measurements and Raman spectroscopy using a diamond anvil cell. It was found that the tetragonal LLZO transforms to the high-pressure cubic phase (HP-c-LLZO) at 71.8 GPa in a N{sub 2} medium and at 25.8 GPa in the absence of pressure mediums. Uniaxial compression in the absence of pressure mediums induced the phase transition at much lower pressures than in the hydrostatic case when N{sub 2} was used as the pressure medium. High pressure in situ Raman spectroscopy suggested that the Li coordination in HP-c-LLZO was different from that reported in cubic LLZO, which had been stabilized by doping Al at ambient pressure and room temperature.

36 MATERIALS SCIENCE↗

Structural stability of single-layer MoS 2 under large strain

Out-of-plane relaxation can introduce MoS 2 in flexible electronic/optoelectronic devices, while under larger strain it is possible to frustrate the structure of MoS 2 . On the basis of first-principle calculations, we investigated the ideal tensile stress strain relations and failure mechanism of single-layer MoS 2 structure under large strain. Moreover, the instability of phonon modes near the K point results in the decrease of tensile stress under large strain. The relative out-of-plane movement of Mo atoms is found to contribute to the mechanism of the soft phonon mode.

36 MATERIALS SCIENCE↗

Structural stability and electronic properties of low-index surfaces of SnS

Thin film photovoltaic cells are increasingly important for cost-effective solar energy harvesting. Layered SnS is a promising absorber material due to its high optical absorption in the visible and good doping characteristics. We use first-principles calculations based on density functional theory to study structures of low-index surfaces of SnS using stoichiometric and oxygen-containing structural models, in order to elucidate their possible effect on the efficiency of the photovoltaic device. We find that the surface energy is minimized for the surface with orientation parallel to the layer stacking direction. Compared to stoichiometric surfaces, the oxygen-containing surfaces exhibit fewer electronic states near the band gap. This reduction of near-gap surface states by oxygen should reduce recombination losses at grain boundaries and interfaces of the SnS absorber, and should be beneficial to the efficiency of the solar cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the structural stability of crystalline ceria phases in undoped and acceptor-doped ceria materials under in situ reduction conditions

The reduction of pure and Sm-doped ceria in hydrogen has been studied by synchrotron-based in situ X-ray diffraction to eventually prove or disprove the presence of crystalline cerium hydride (CeH x ) phases and the succession of potential structural phase (trans)formations of reduced cerium oxide phases during heating-cooling cycles up to 1273 K. Despite a recent report on the existence of bulk and surface CeH x phases during reductive treatment of pure CeO 2 in H 2 , structural analysis by Rietveld refinement as well as additional 1 H-NMR spectroscopy did not reveal the presence of any crystalline CeH x phase. Rather, a sequence of phase transformations during the re-cooling process in H 2 has been observed. In both samples, the reduced/defective fluorite lattice undergoes at first a transformation into a bixbyite-type lattice with a formal stoichiometry Ce 0.58 3+ Ce 0.42 4+ O 1.71 and Sm 0.15 3+ Ce 0.39 3+ Ce 0.46 4+ O 1.73 , before a transformation into rhombohedral Ce 7 O 12 takes place in pure CeO 2 . This phase is clearly absent for the Sm-doped material. Finally, a triclinic Ce 11 O 20 phase appears for both materials, which can be recovered to room temperature, and on which a phase mixture of bixbyite Ce 0.66 3+ Ce 0.34 4+ O 1.67 , rh-Ce 0.60 3+ Ce 0.40 4+ O 1.70 and tri-Ce 0.48 3+ Ce 0.52 4+ O 1.76 (for pure CeO 2 ) or bixbyite Sm 0.15 3+ Ce 0.47 3+ Ce 0.38 4+ O 1.69 and tri-Sm 0.15 3+ Ce 0.31 3+ Ce 0.54 4+ O 1.77 (for Sm-doped CeO 2 ) prevails. The absence of the rhombohedral phase indicates that Sm doping leads to the stabilization of the bixbyite phase over the rhombohedral one at this particular oxygen vacancy concentration. It is worth noting that recent work proves that hydrogen is indeed incorporated within the structures during the heat treatments, but under the chosen experimental conditions it has apparently no effect on the salient structural principles during reduction.

36 MATERIALS SCIENCE↗