Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Evidence of liquid phase during laser-induced periodic surface structures formation induced by accumulative ultraviolet picosecond laser beam

Laser-induced periodic surface structures (LIPSS) were formed on Cu/Si or Cu/glass thin films using Nd:YAG laser beam (40 ps, 10 Hz, and 30 mJ/cm{sup 2}). The study of ablation threshold is always achieved over melting when the variation of the number of pulses increases from 1 to 1000. But the incubation effect is leading to reduce the threshold of melting as increasing the number of laser pulse. Also, real time reflectivity signals exhibit typical behavior to stress the formation of a liquid phase during the laser-processing regime and helps to determine the threshold of soft ablation. Atomic Force Microscopy (AFM) analyses have shown the topology of the micro-crater containing regular spikes with different height. Transmission Electron Microscopy (TEM) allows finally to show three distinguished zones in the close region of isolated protrusions. The central zone is a typical crystallized area of few nanometers surrounded by a mixed poly-crystalline and amorphous area. Finally, in the region far from the protrusion zone, Cu film shows an amorphous structure. The real time reflectivity, AFM, and HR-TEM analyses evidence the formation of a liquid phase during the LIPSS formation in the picosecond regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lateral Structure Formation in Polyelectrolyte Brushes Induced by Multivalent Ions

We provide a theoretical model for the collapse of polyelectrolyte brushes in the presence of multivalent ions, focusing on the formation of lateral inhomogeneties in the collapsed state. Polyelectrolyte brushes are important in a variety of applications, including stabilizing colloidal particles and lubricating surfaces. Many uses rely on the extension of the densely grafted polymer chains from the surface in the extended brush morphology. In the presence Extended Brush of multivalent ions, brushes are significantly shorter than in monovalent ionic solutions, which greatly affects their properties. We base our theoretical analysis on an analogous collapse of polyelectrolyte brushes in a poor solvent, providing an energy balance representation for pinned micelles and cylindrical bundles. The equilibrium brush heights predicted for these structures are of a similar magnitude to those measured experimentally. The formation of lateral structures can open new avenues for stimuli-responsive applications that rely on nanoscale pattern formation on surfaces.

Brettmann, Blair↗

In situ synthesis of WC–Co nanocomposite powder via core–shell structure formation

Highlights: ► The hydrothermal method was firstly used to synthesize core–shell structured precursor to prepare WC–Co powder. ► WC–Co nanocomposite powder was obtained through in situ reduction and carbonization of the precursor in vacuum at 950 °C for 1 h. ► Particles of WC–Co composite indicated to have a crystallite size of 30–50 nm. -- Abstract: Cemented carbide WC–Co nanocomposite powders were synthesized through in situ reduction and carbonization of a core/shell precursor in vacuum. Samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). The results revealed that WC–Co composite powders can be obtained at 950 °C for 1 h and the particle size is in the range from 30 to 50 nm with good dispersion. The formation mechanism of the WC–Co composite by in situ reduction and carbonization reactions was proposed. The preparation process could be divided into three steps: first, the reagents were dissolved and mixed to an aqueous solution; second step is to synthesize a carbon encapsulated core/shell nanostructure precursor using hydrothermal route, and finally, in situ reduction and carbonization of the precursor to the desired nanocomposite powders in vacuum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

L1 0 structure formation in slow-cooled Fe-Au nanoclusters

An ordered L1 0 structure has been formed in near-stoichiometric Fe-Au alloy nanoparticles. The L1 0 structure with a = 0.367 nm and c = 0.360 nm was observed in nanoclusters with diameters below 10 nm after slow cooling from 600 °C. The stable L1 0 structure formed from a parent fcc solid solution phase observed in the as-formed clusters. The fcc phase has a lattice parameter of 0.417 nm, significantly expanded compared to both Au and γ-Fe. The saturation magnetization and coercivity of both fcc and L1 0 structures were much lower than expected considering Fe dilution effects suggesting competing ferromagnetic and anti-ferromagnetic ordering.

36 MATERIALS SCIENCE↗

An Initial Microstructurally Informed Model of High Burnup Structure Formation in UO 2 Fuel

The microstructure of a UO 2 fuel pellet changes as burnup increases, impacting fuel performance. Predicting and characterizing high burnup structure (HBS) and dark zone formation is a key part of supporting burnup limit extensions for light water reactors. This paper describes a model developed through fitting radially resolved pellet data obtained from recently published microstructural characterization data. The model predicts grain size and grain character, in addition to pore density and size, with fitting dependencies on power history variables. Separately fitting power history variables to microstructural parameters allows for insight into the underlying physical phenomena for future model development. Additionally, experimental data have been correlated to an HBS fraction to facilitate the development of a model capable of predicting a total fuel restructured fraction at the engineering scale. In conclusion, this two-step approach provides a coupling from reactor power history to microstructural data to fractional HBS and creates a basis to model HBS-dependent parameters in a fuel performance code.

High burnup structure↗

Structure formation constraints on Sommerfeld-enhanced dark matter annihilation

We study the growth of cosmic structure in a ΛCDM universe under the assumption that dark matter self-annihilates with an averaged cross section times relative velocity that grows with the scale factor, an increase known as Sommerfeld-enhancement. Such an evolution is expected in models in which a light force carrier in the dark sector enhances the annihilation cross section of dark matter particles, and has been invoked, for instance, to explain anomalies in cosmic ray spectra reported in the past. In order to make our results as general as possible, we assume that dark matter annihilates into a relativistic species that only interacts gravitationally with the standard model. This assumption also allows us to test whether the additional relativistic species mildly favored by cosmic-microwave background data could originate from dark matter annihilation. We do not find evidence for Sommerfeld-enhanced dark matter annihilation and derive the corresponding upper limits on the annihilation cross-section.

79 ASTRONOMY AND ASTROPHYSICS↗

Gallium beam lithography for superconductive structure formation

The present invention relates to the use of gallium beam lithography to form superconductive structures. Generally, the method includes exposing a surface to gallium to form an implanted region and then removing material adjacent to and/or below that implanted region. In particular embodiments, the methods herein provide microstructures and nanostructures in any useful substrate, such as those including niobium, tantalum, tungsten, or titanium.

36 MATERIALS SCIENCE↗

Titanium embedded cage structure formation in Al{sub n}Ti{sup +} clusters and their interaction with Ar

Recently, Ar physisorption was used as a structural probe for the location of the Ti dopant atom in aluminium cluster cations, Al{sub n}Ti{sup +} [Lang et al., J. Am. Soc. Mass Spectrom. 22, 1508 (2011)]. As an experiment result, the lack of Ar complexes for n > n{sub c} determines the cluster size for which the Ti atom is located inside of an Al cage. To elucidate the decisive factors for the formation of endohedrally Al{sub n}Ti{sup +}, experimentalists proposed detailed computational studies as indispensable. In this work, we investigated, using the density functional theory, the structural and electronic properties of singly titanium doped cationic clusters, Al{sub n}Ti{sup +} (n = 16–21) as well as the adsorption of an Ar atom on them. The first endohedral doped cluster, with Ti encapsulated in a fcc-like cage skeleton, appears at n{sub c} = 21, which is the critical number consistent with the exohedral-endohedral transition experimentally observed. At this critical size the non-crystalline icosahedral growth pattern, related to the pure aluminium clusters, with the Ti atom in the surface, changes into a endohedral fcc-like pattern. The map of structural isomers, relative energy differences, second energy differences, and structural parameters were determined and analyzed. Moreover, we show the critical size depends on the net charge of the cluster, being different for the cationic clusters (n{sub c} = 21) and their neutral counterparts (n{sub c} = 20). For the Al {sub n} Ti {sup +} · Ar complexes, and for n < 21, the preferred Ar adsorption site is on top of the exohedral Ti atom, with adsorption energy in very good agreement with the experimental value. Instead, for n = 21, the Ar adsorption occurs on the top an Al atom with very low absorption energy. For all sizes the geometry of the Al{sub n}Ti{sup +} clusters keeps unaltered in the Ar-cluster complexes. This fact indicates that Ar adsorption does not influence the cluster structure, providing support to the experimental technique used. For n{sub c} = 21, the smallest size of endohedral Ti doped cationic clusters, the Ar binding energy decreases drastically, whereas the Ar-cluster distance increases substantially, point to Ar physisorption, as assumed by the experimentalists. Calculated Ar adsorption energies agree well with available experimental binding energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear structure formation in the cubic Galileon gravity model

We model the linear and nonlinear growth of large scale structure in the Cubic Galileon gravity model, by running a suite of N-body cosmological simulations using the ECOSMOG code. Our simulations include the Vainshtein screening effect, which reconciles the Cubic Galileon model with local tests of gravity. In the linear regime, the amplitude of the matter power spectrum increases by ∼ 20% with respect to the standard ΛCDM model today. The modified expansion rate accounts for ∼ 15% of this enhancement, while the fifth force is responsible for only ∼ 5%. This is because the effective unscreened gravitational strength deviates from standard gravity only at late times, even though it can be twice as large today. In the nonlinear regime (k∼>0.1h Mpc{sup −1}), the fifth force leads to only a modest increase (∼<8%) in the clustering power on all scales due to the very efficient operation of the Vainshtein mechanism. Such a strong effect is typically not seen in other models with the same screening mechanism. The screening also results in the fifth force increasing the number density of halos by less than 10%, on all mass scales. Our results show that the screening does not ruin the validity of linear theory on large scales which anticipates very strong constraints from galaxy clustering data. We also show that, whilst the model gives an excellent match to CMB data on small angular scales (l∼>50), the predicted integrated Sachs-Wolfe effect is in tension with Planck/WMAP results.

79 ASTRONOMY AND ASTROPHYSICS↗

Large-scale structure formation with massive neutrinos and dynamical dark energy

Over the next decade, cosmological measurements of the large-scale structure of the Universe will be sensitive to the combined effects of dynamical dark energy and massive neutrinos. The matter power spectrum is a key repository of this information. We extend higher-order perturbative methods for computing the power spectrum to investigate these effects over quasilinear scales. Through comparison with N-body simulations, we establish the regime of validity of a time-renormalization group perturbative treatment that includes dynamical dark energy and massive neutrinos. We also quantify the accuracy of standard, renormalized and Lagrangian resummation (LPT) perturbation theories without massive neutrinos. We find that an approximation that neglects neutrino clustering as a source for nonlinear matter clustering predicts the baryon acoustic oscillation (BAO) peak position to 0.25% accuracy for redshifts 1 ≤ z ≤ 3, justifying the use of LPT for BAO reconstruction in upcoming surveys. Here, we release a modified version of the public Copter code which includes the additional physics discussed in the paper.

79 ASTRONOMY AND ASTROPHYSICS↗

The effect of the sputtering gas (Ar, Xe) on FePt clusters formation: structural and magnetic properties

It will be reported about the effect of the sputtering gases, Ar and Xe, on FePt clusters formation by magnetron sputtering deposition at high working pressures. All layers, with bulk equivalent thicknesses between 3 to 5 nm, were realized at RT by a sequential layer by layer deposition or a co-deposition of Fe and Pt. After rapid thermal annealing at 500 deg. C, the highest L1{sub 0} fraction was found using Xe as sputtering gas: Xe decreases the transformation activation energy and therefore, reduces the critical thickness necessary to obtain the high anistropic ferromagnetic phase. Ar assisted growths lead to FePt clusters in the L1{sub 0} phase only if the sequential layer deposition is used, whereas for Xe no differences in the deposition techniques were observed.

36 MATERIALS SCIENCE↗

Equilibrium Cu-Ag nanoalloy structure formation revealed by in situ scanning transmission electron microscopy heating experiments

Using in situ scanning transmission electron microscopy heating experiments, we observed the formation of a 3-dimensional (3D) epitaxial Cu-core and Ag-shell equilibrium structure of a Cu-Ag nanoalloy. The structure was formed during the thermal interaction of Cu(∼12 nm) and Ag NPs(∼6 nm) at elevated temperatures (150–300 °C) by the Ag NPs initially wetting the Cu NP along its (111) surfaces at one or multiple locations forming epitaxial Ag/Cu (111) interfaces, followed by Ag atoms diffusing along the Cu surface. This phenomenon was confirmed through Monte Carlo simulations to be a nanoscale effect related to the large surface-to-volume ratio of the NPs.

36 MATERIALS SCIENCE↗

Origin of amphiphilic molecules and their role in primary structure formation

Attempts to solve two fundamental questions are described: the first concerns which mechanisms were responsible for the self-assembly of membrane structures on the prebiotic Earth, and the second concerns the routes by which considerable amounts of membrane amphiphiles formed from simpler hydrocarbons. The physicochemical properties of several amphiphilic compounds extracted from the Murchison carbonaceous chondrite were studied, using infra-red and fluorescent spectroscopy, measurements of surface activity, chromato-mass spectrometry, and polarization and electron microscopy. The results supported previous observations that amphiphilic and aromatic hydrocarbons were present in significant quantities, and the first demonstration of surface activity among a number of acidic derivatives of hydrocarbons is reported. In addition, one fraction of the surface-active compounds can form bilayer structures, showing that membranes could have self-assembled on the prebiotic Earth. Photochemical oxidation of hydrocarbons is shown to be a likely source of the amphiphilic molecules required for the self-assembly of primary membrane structures.

NASA Discipline Number 52-20↗

Magnetogenesis from early structure formation due to Yukawa forces

Yukawa interactions can mediate relatively long-range attractive forces between fermions in the early universe. Such a globally attractive interaction creates an instability that can result in the growth of structure in the affected species even during the radiation dominated era. The formation and collapse of fermionic microhalos can create hot fireballs at the sites of the collapsing halos which inject energy into the cosmic plasma. In this paper we study a new phenomena which can take place in such models. We show that the injected energy can be partially converted into primordial magnetic fields and we estimate the correlation scale and the power spectrum of these fields. We show that they may be the seeds of the observed astrophysical magnetic fields.

79 ASTRONOMY AND ASTROPHYSICS↗

Belowground plant carbon and nitrogen exchange: plant-derived carbon inputs and pore structure formation

Belowground plant transfer of carbon (C) and nitrogen (N) can benefit soil ecosystems, increasing soil C gains and plant N availability, while improving soil pore structure. We explored such transfers among three plant species of North American prairie, where C and N were transferred from a grass (Panicum virgatum L., switchgrass (Sgrass)) to either a legume (Lespedeza capitata Michx., bush clover (Bclover)), a forb (Rudbeckia hirta L., black-eyed Susan (BSforb)), or a mixture of the two. The plants were grown either with/out direct root contact, thus allowing assessment of the relative contributions of fungal- and root-based transfer pathways. The Sgrass was labeled with 13 C and 15 N, and C and N transfers were assessed by measuring isotope enrichment of roots and aboveground biomass of neighboring plants. Soil inputs of plant-derived C and N were assessed by isotope analyses of the rhizosphere soil. X-ray computed tomography was used for pore structure analyses. Carbon transfer was much higher in the presence of direct/close root contact between source and recipient plants, yet N transfers appeared to be mainly fungal driven. Here, while C and N were readily transferred from Sgrass to other Sgrass and Bclover neighbors, transfers to BSforb were negligible. However, in a three species system, the presence of the legume enhanced C and N transfers to BSforb, suggesting non-additive influences of diverse plant community composition. The more plant-derived C and N was found in the rhizosphere of recipient plants, the greater C and N transfers through roots. Greater C and N transfers were associated with increases in 8–30 μm diameter pores and decreases in >150 μm pores. Summarily, diverse plant communities, especially those with legumes, increase C and N transfers, which then benefit soil C inputs and its protection via changes in pore structure.

13 CO 2 pulse labeling↗