Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured model reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Two-tier model reduction of viscoelastically damped finite element models

Transient simulations of linear viscoelastically damped structures necessitate critical computational resources to directly integrate the full-order finite element model with time-stepping algorithms. Traditional modal reduction techniques are not directly applicable to these systems since viscoelastic materials depend on time and frequency. A more appropriate reduction basis is obtained from the nonlinear, complex eigenvalue problem, whose eigenvectors capture the appropriate kinematics and enable frequency-based mode selection; unfortunately, the computational cost is prohibitive for computing these modes from large-scale engineering models. To address this shortcoming, this work proposes a novel two-tier reduction procedure to reduce the upfront cost of solving the complex, nonlinear eigenvalue problem. The first reduction step reduces the full-order model with real mode shapes linearized about various centering frequencies to capture the kinematics over a full range of viscoelastic material behavior (glassy, rubbery, and glass-transition zones). This tier-one reduction preserves time-temperature superposition and allows the equations to depend parametrically on operating temperature. The second-level reduction then solves the complex, nonlinear eigenmode solutions in the tier-one reduced space about a fixed temperature to further reduce the equations-of-motion. The method is demonstrated on a cantilevered sandwich plate to display its accuracy and efficiency in comparison to full-order model predictions.

97 MATHEMATICS AND COMPUTING↗
NASA NTRSDate not supplied

Fully Coupled Aeroelastic Stability Analysis of Adaptive Shape Memory Alloy Structural Technologies for Airframe Noise Reduction

The objective of this work is the development of computational models and analysis of the coupled fluid-structure response of a slat gap filler (SGF) noise treatment applied to the leading-edge-slat component of a high-lift system typical of modern transport aircraft. The representative airframe chosen for this work is NASA’s High-lift Common Research Model (CRM-HL) in a baseline high-lift configuration. Superelastic shape memory alloys (SMAs) have been identified as enabling materials for these structural treatments. Since the technology elements rely upon having a highly reconfigurable structure, designs must be assessed for static aeroelastic deflection as well as dynamic aeroelastic stability using coupled computational fluid dynamics (CFD) and nonlinear computational structural dynamics (NL CSD) tools. The technical approach consists of solving for the flow field around the entire vehicle using a global CFD model, followed by extraction of relevant local subdomain data for CFD and NL-CSD co-simulations. The SGF design is assessed using both 2D and 3D co-simulations to predict quasi-static aeroelastic deformations and to assess dynamic aeroelastic stability.

Fluid structure interaction↗
NASA NTRS1994

Dynamic analysis of Space Shuttle/RMS configuration using continuum approach

The initial assembly of Space Station Freedom involves the Space Shuttle, its Remote Manipulation System (RMS) and the evolving Space Station Freedom. The dynamics of this coupled system involves both the structural and the control system dynamics of each of these components. The modeling and analysis of such an assembly is made even more formidable by kinematic and joint nonlinearities. The current practice of modeling such flexible structures is to use finite element modeling in which the mass and interior dynamics is ignored between thousands of nodes, for each major component. The model characteristics of only tens of modes are kept out of thousands which are calculated. The components are then connected by approximating the boundary conditions and inserting the control system dynamics. In this paper continuum models are used instead of finite element models because of the improved accuracy, reduced number of model parameters, the avoidance of model order reduction, and the ability to represent the structural and control system dynamics in the same system of equations. Dynamic analysis of linear versions of the model is performed and compared with finite element model results. Additionally, the transfer matrix to continuum modeling is presented.

Ramakrishnan, Jayant↗
NASA NTRS1995

Effect of turbulence models on criticality conditions in swirling flows

The critical state of vortex cores downstream of vortex breakdown has been studied. Base vortical flows were computed using the Reynolds-averaged, axisymmetric Navier-Stokes equations. Standard K - epsilon, RNG and second-order Reynolds stress models were employed. Results indicate that the return to supercriticality is highly dependent on the turbulence model. The K - epsilon model predicted a rapid return of the vortex to supercritical conditions, the location of which showed little sensitivity to changes in the swirl ratio. The Reynolds stress model predicted that the vortex remains subcritical to the end of the domain for each of the swirl ratios employed, and provided results in qualitative agreement with experimental work. The RNG model produced intermediate results, with a downstream movement in the critical location with increasing swirl. Calculations for which area reductions were introduced at the exit in a subcritical flow were also performed using the Reynolds stress model. The structure of the resulting recirculation zone was altered significantly. However, when area reductions were employed within supercritical flows as predicted using the two-equation models, no significant influence on the recirculation zone was noted.

Gatski, Thomas B.↗
NASA NTRS1992

Collapse analysis of a waffle plate strongback for Space Station Freedom

The structural integrity was studied of the Integrated Equipment Assembly (IEA) Strongback of the SSF for the launch environment. The strongback structure supports the electrical power system for SSF. To achieve minimum launch mass, it is essential that flight structures are designed as light as possible. A nonlinear structural analysis was conducted to determine the collapse load of the structure and the associated factor of safety against the service loads. A modeling technique is provided for simulating the load conditions and the buckling and post buckling (collapse) load is evaluated of the IEA Strongback structure, using the finite element computer code MARC. Two of four strongback panels were modeled and analyzed. The effects were examined of the following factors on the global behavior of the strongback panels: (1) load simplification and simulation; (2) type of support boundary conditions; and (3) the possibility of weight reduction of the original structure. For this purpose, several models of the two panels of the strongback were considered. The stress level and distribution in the panels for launch condition, the Eigenvalue critical buckling load and/or the collapse load were determined.

Monasa, Frank F.↗
DOE OSTI2025

Observations and modeling reveal that heatwaves reduce photosynthesis, plant carbon reserves, and net carbon uptake

Heatwaves threaten ecosystem carbon balances, yet the mechanisms driving short-term carbon flux responses remain poorly understood. Here, integrating high-frequency eddy covariance (EC) data from 140 global flux tower sites (872 site-years) with detailed process-based modeling, we examine ecosystem responses during and immediately after heatwaves. We show that heatwaves caused a −40% (range [−29%, −128%]) reduction in net ecosystem productivity (NEP) compared to pre-heatwave values, with this reduction persisting over the following two weeks (−38% range [+3%, −154%]). We attributed NEP decreases to photosynthesis decreases more than to ecosystem respiration (RE) increases. Forest sites had greater NEP decreases during heatwaves than non-forest sites, but remained carbon sinks afterwards, indicating resilience. Our modeling analysis of extreme heatwaves at selected EC sites shows that decreased photosynthesis, increased maintenance respiration, and decreased plant non-structural carbon reserves during heatwaves drive carbon cycle changes that persist for weeks. Consistent with phenocam observations, we modeled a reduction in leaf area index caused by reduced non-structural carbon reserves, leading to early leaf senescence and longer-term impacts. Ongoing increases in heatwaves are therefore likely to reduce NEP across a range of ecosystems, exacerbating carbon cycle feedback.

carbon cycle↗
NASA NTRS1995

Aeroelasticity and structural optimization of composite helicopter rotor blades with swept tips

This report describes the development of an aeroelastic analysis capability for composite helicopter rotor blades with straight and swept tips, and its application to the simulation of helicopter vibration reduction through structural optimization. A new aeroelastic model is developed in this study which is suitable for composite rotor blades with swept tips in hover and in forward flight. The hingeless blade is modeled by beam type finite elements. A single finite element is used to model the swept tip. Arbitrary cross-sectional shape, generally anisotropic material behavior, transverse shears and out-of-plane warping are included in the blade model. The nonlinear equations of motion, derived using Hamilton's principle, are based on a moderate deflection theory. Composite blade cross-sectbnal properties are calculated by a separate linear, two-dimensional cross section analysis. The aerodynamic loads are obtained from quasi-steady, incompressible aerodynamics, based on an implicit formulation. The trim and steady state blade aeroelastic response are solved in a fully coupled manner. In forward flight, where the blade equations of motion are periodic, the coupled trim-aeroelastic response solution is obtained from the harmonic balance method. Subsequently, the periodic system is linearized about the steady state response, and its stability is determined from Floquet theory.

Yuan, K. A.↗
NASA NTRS2007

Structural Design and Analysis of Un-pressurized Cargo Delivery Vehicle

As part of the Exploration Systems Architecture Study, NASA has defined a family of vehicles to support lunar exploration and International Space Station (ISS) re-supply missions after the Shuttle s retirement. The Un-pressurized Cargo Delivery Vehicle (UCDV) has been envisioned to be an expendable logistics delivery vehicle that would be used to deliver external cargo to the ISS. It would be launched on the Crew Launch Vehicle and would replace the Crew Exploration Vehicle. The estimated cargo would be the weight of external logistics to the ISS. Determining the minimum weight design of the UCDV during conceptual design is the major issue addressed in this paper. This task was accomplished using a procedure for rapid weight estimation that was based on Finite Element Analysis and sizing of the vehicle by the use of commercially available codes. Three design concepts were analyzed and their respective weights were compared. The analytical structural weight was increased by a factor to account for structural elements that were not modeled. Significant reduction in weight of a composite design over metallic was achieved for similar panel concepts.

Martinovic, Zoran N.↗
NASA NTRS1992

Discrete and continuous dynamics modeling of a mass moving on a flexible structure

A general discrete methodology for modeling the dynamics of a mass that moves on the surface of a flexible structure is developed. This problem was motivated by the Space Station/Mobile Transporter system. A model reduction approach is developed to make the methodology applicable to large structural systems. To validate the discrete methodology, continuous formulations are also developed. Three different systems are examined: (1) simply-supported beam, (2) free-free beam, and (3) free-free beam with two points of contact between the mass and the flexible beam. In addition to validating the methodology, parametric studies were performed to examine how the system's physical properties affect its dynamics.

Herman, Deborah Ann↗
DOE OSTI2018

Interface reduction for Hurty/Craig-Bampton substructured models: Review and improvements

The Hurty/Craig-Bampton method in structural dynamics represents the interior dynamics of each subcomponent in a substructured system with a truncated set of normal modes and retains all of the physical degrees of freedom at the substructure interfaces. This makes the assembly of substructures into a reduced-order system model relatively simple, but means that the reduced-order assembly will have as many interface degrees of freedom as the full model. When the full-model mesh is highly refined, and/or when the system is divided into many subcomponents, this can lead to an unacceptably large system of equations of motion. To overcome this, interface reduction methods aim to reduce the size of the Hurty/Craig-Bampton model by reducing the number of interface degrees of freedom. This research presents a survey of interface reduction methods for Hurty/Craig-Bampton models, and proposes improvements and generalizations to some of the methods. Some of these interface reductions operate on the assembled system-level matrices while others perform reduction locally by considering the uncoupled substructures. The advantages and disadvantages of these methods are highlighted and assessed through comparisons of results obtained from a variety of representative linear FE models.

42 ENGINEERING↗
NASA NTRS1977

Transpose of finite-element data

TRANSPOSE computer program examines single point of structural-analysis model under many loads. Program helps in data reduction and analysis, saves output for subsequent postprocessing, and reduces time required for structure analysis. Essentially, program transposes finite-element data from one loading condition for all element and node data to one-node-point data for all loading conditions.

Furuike, T.↗
NASA NTRS1987

Nonlinear dynamic analysis of quasi-symmetric anisotropic structures

An efficient computational method for the nonlinear dynamic analysis of quasi-symmetric anisotropic structures is proposed. The application of mixed models simplifies the analytical development and improves the accuracy of the response predictions, and operator splitting allows the reduction of the analysis model of the quasi-symmetric structure to that of the corresponding symmetric structure. The preconditoned conjugate gradient provides a stable and effective technique for generating the unsymmetric response of the structure as the sum of a symmetrized response plus correction modes. The effectiveness of the strategy is demonstrated with the example of a laminated anisotropic shallow shell of quadrilateral planform subjected to uniform normal loading.

Noor, Ahmed K.↗
NASA NTRS2023

Fully Coupled Aeroelastic Stability Analysis of Adaptive Shape Memory Alloy Structural Technologies for Airframe Noise Reduction

This final report documents work performed by ATA Engineering, Inc., (ATA) to develop computational models and analyze the coupled fluid-structure response of two types of noise treatments applied to the leading-edge-slat component of a high-lift system typical of modern transport aircraft. The first treatment is a slat-gap filler (SGF), which closes the gap between the suction surfaces of a deployed slat and an aircraft main wing, and the second treatment is a slat-cove filler (SCF), which replaces the recirculating flow on the slat cove with a surface that promotes flow attachment. The representative airframe chosen for this work was NASA’s High-Lift Common Research Model (CRM-HL) in a baseline high-lift configuration. Superelastic shape memory alloys (SMAs) have been identified as enabling materials for these structural treatments. Since the technology elements rely upon having a highly reconfigurable structure, designs were assessed for their static aeroelastic deflection as well as their dynamic aeroelastic stability using coupled computational fluid dynamics (CFD) and nonlinear computational structural dynamics (NL-CSD) tools. Specifically, fluid-structure interaction (FSI) problems were solved computationally using the CFD solver Loci/CHEM and the NL-CSD solver Abaqus. As a part of the overall project, a similar capability was implemented using the CFD solver FUN3D coupled to Abaqus, although that work is documented in a separate report and that FSI framework was not used to analyze any of NASA’s SGF and SCF configurations. The technical approach consisted of solving for the flow field around the entire vehicle using a global CFD model, followed by extraction of relevant local subdomain data for CFD and NL-CSD co-simulations. The SGF design was analyzed using both 2D and 3D co-simulations to predict quasi-static aeroelastic deformations and to assess dynamic aeroelastic stability, whereas the SCF was analyzed in 2D only. SGF static aeroelastic response predictions focused on characterizing the deformed shape, with maximum displacements predicted to be on the order of magnitude of the technology element panel thickness. SGF dynamic aeroelastic response predictions used Partial Floquet analysis of the temporal evolution of selected nodal displacements to quantify the sign and magnitude of aeroelastic damping. Results suggest that the CRM-HL operating conditions would result in a dynamically stable response. The simulated dynamic pressure was also increased up to a factor of about four, and resulting responses suggest that predicted dynamic stability would be achieved with some margin.

Fluid Structure Interaction↗
NASA NTRS1991

PDEMOD: Software for control/structures optimization

Because of the possibility of adverse interaction between the control system and the structural dynamics of large, flexible spacecraft, great care must be taken to ensure stability and system performance. Because of the high cost of insertion of mass into low earth orbit, it is prudent to optimize the roles of structure and control systems simultaneously. Because of the difficulty and the computational burden in modeling and analyzing the control structure system dynamics, the total problem is often split and treated iteratively. It would aid design if the control structure system dynamics could be represented in a single system of equations. With the use of the software PDEMOD (Partial Differential Equation Model), it is now possible to optimize structure and control systems simultaneously. The distributed parameter modeling approach enables embedding the control system dynamics into the same equations for the structural dynamics model. By doing this, the current difficulties involved in model order reduction are avoided. The NASA Mini-MAST truss is used an an example for studying integrated control structure design.

Taylor, Lawrence W., Jr.↗
NASA NTRS1990

Recent literature on structural modeling, identification, and analysis

The literature on the mathematical modeling of large space structures is first reviewed, with attention given to continuum models, model order reduction, substructuring, and computational techniques. System identification and mode verification are then discussed with reference to the verification of mathematical models of large space structures. In connection with analysis, the paper surveys recent research on eigensolvers and dynamic response solvers for large-order finite-element-based models.

Craig, Roy R., Jr.↗
DOE OSTI2026

A Structure-Preserving Decorated Particle Method for the Vlasov-Poisson System

We revisit the Scovel-Weinstein framework (Scovel & Weinstein, CPAM 1994) for reducing the Vlasov-Poisson system while preserving its Hamiltonian structure. Standard particle-in-cell (PIC) algorithms approximate the distribution function by macro-particles with position and velocity. In contrast, Scovel-Weinstein decorated particles involve additional shape degrees of freedom, while maintaining a finite-dimensional reduction with Hamiltonian structure inherited from the continuum model. Although the original work established this structure three decades ago, its computational potential has remained largely unexplored. We present a practical implementation of the Scovel-Weinstein model and compare it with a standard PIC algorithm. Numerical experiments demonstrate that macro-particles in standard PIC can be replaced by far fewer decorated particles while retaining comparable accuracy. This decorated particle approach offers a new structure-preserving paradigm for kinetic plasma simulation.

65M75, 70H05, 70G65↗
NASA NTRS2001

Reduction of Tunnel Dynamics at the National Transonic Facility (Invited)

This paper describes the results of recent efforts to reduce the tunnel dynamics at the National Transonic Facility. The results presented describe the findings of an extensive data analysis, the proposed solutions to reduce dynamics and the results of implementing these solutions. These results show a 90% reduction in the dynamics around the model support structure and a small impact on reducing model dynamics. Also presented are several continuing efforts to further reduce dynamics.

Kilgore, W. A.↗