Search NASASearch

SEARCH · Search NASA

Results for “subsurface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Remote sensing of subsurface water temperature by Raman scattering

The application of Raman scattering to remote sensing of subsurface water temperature and salinity is considered, and both theoretical and experimental aspects of the technique are discussed. Recent experimental field measurements obtained in coastal waters and on a trans-Atlantic/Mediterranean research cruise are correlated with theoretical expectations. It is concluded that the Raman technique for remote sensing of subsurface water temperature has been brought from theoretical and laboratory stages to the point where practical utilization can now be developed.

Leonard, D. A.

Remote sensing of subsurface water temperature by laser Raman spectroscopy

This paper describes experimental remote sensing of subsurface water temperature using the Raman spectroscopic technique. By the use of a pulsed laser and range gating detection techniques, Raman scattering is analyzed as a function of depth in a radar-like echo mode, and thus subsurface profiles of temperature and transmission are obtained. Experiments are described in which Raman data using polarization spectroscopy has been obtained from a ship as a function of depth in ocean water near Grand Bahama Island. A spectral temperature accuracy of + or - 1 C has been obtained from this data in the first two optical attenuation lengths. Raman data obtained from ocean water using the NASA airborne oceanographic lidar is also presented.

Leonard, D. A.

High-Resolution Subsurface-Interface Radar

Homomorphic deconvolution signal processing enhances information obtained in high-resolution soil-depth measurements by radar. Proposed technique is expected to increase accuracy with which soil-layer depths are gaged. Intended use with subsurface-interface radar sounding, in which subsurface features of soils are mapped.

Steinway, W. J.

Mars - Subsurface properties from observed longitudinal variation of the 3.5-mm brightness temperature

Extensive 3.5-mm measurements are reported which show a variation in the brightness temperature of Mars, with the Central Meridian Longitude that is generally in phase with the variation at 2.8 cm and is opposite in sign from the variations at 20 microns. It is pointed out that the phase result is not unexpected, since 3.5 mm is longer than the wavelength at which the phase behavior is expected to change. The result that the 3.5-mm rotation curve amplitude is larger than the amplitudes at both 20 microns and 2.8 cm, however, is unexpected. This result, it is noted, can be explained as a consequence of subsurface scattering from rocks smaller than 1.5 cm in radius. A correlation of subsurface scatterers with the location of the high-thermal inertial regions would be consistent with the hypothesis that rock abundance predominates in determining the thermal inertia.

Epstein, E. E.

Subsurface stress evaluations under rolling/sliding contacts

A computer model has been developed for evaluating the subsurface stresses incurred within rolling/sliding (elastic) contacts. The model involves first defining the stress tensor at any point (x, y, or z) beneath the surface in terms of the surface stresses. The stress tensors are analyzed to determine the maximum shear stresses and stress reversals. As a result of computations with the model, several observations were made. For example, the maximum reversing shear stresses are on the plane of the orthogonal shear stress. Further, the magnitude of these stresses is not altered by friction. However, under very high friction (typical of dry contact) surface stresses can dominate over subsurface stresses.

Kannel, J. W.

Global distribution and migration of subsurface ice on Mars

An analytical model is developed for the factors which changed the initial distribution and state of H2O, mainly trapped as subsurface ice, on Mars. A uniform initial ice distribution is assumed, and changes in ice layer thickness are calculated at discrete latitudes of Mars. The thermal/diffusive model used for the calculations accounts for variations in the solar luminosity, the planetary obliquity and eccentricity, with obliquity starting 3.5 Gyr ago, and insolation at various latitudes. Attention is given to variations in the albedo due to seasonal CO2 variations, in the regolith temperature, and in atmospheric pressure. Migration of H2O into and out of the regolith is a function of the H2O vapor temperature at the subsurface ice boundary and the annual average H2O at the base of the atmosphere. Projections of the ice thickness over 100 obliquity periods indicate that the intensity of the obliquity effects are latitudinally dependent. H2O atmospheric concentrations are projected to vary up to six orders of magnitude over an obliquity cycle.

Fanale, F. P.

Continuous monitoring of the lunar or Martian subsurface using on-board pattern recognition and neural processing of Rover geophysical data

The ultimate goal is to create an extraterrestrial unmanned system for subsurface mapping and exploration. Neural networks are to be used to recognize anomalies in the profiles that correspond to potentially exploitable subsurface features. The ground penetrating radar (GPR) techniques are likewise identical. Hence, the preliminary research focus on GPR systems will be directly applicable to seismic systems once such systems can be designed for continuous operation. The original GPR profile may be very complex due to electrical behavior of the background, targets, and antennas, much as the seismic record is made complex by multiple reflections, ghosting, and ringing. Because the format of the GPR data is similar to the format of seismic data, seismic processing software may be applied to GPR data to help enhance the data. A neural network may then be trained to more accurately identify anomalies from the processed record than from the original record.

Mcgill, J. W.

Subsurface energy storage and transport for solar-powered geysers on Triton

The location of active geyser-like eruptions and related features close to the current subsolar latitude on Triton suggests a solar energy source for these phenomena. Solid-state greenhouse calculations have shown that sunlight can generate substantially elevated subsurface temperatures. A variety of models for the storage of solar energy in a subgreenhouse layer and for the supply of gas and energy to a geyser are examined. 'Leaky greenhouse' models with only vertical gas transport are inconsistent with the observed upper limit on geyser radius of about 1.5 km. However, lateral transport of energy by gas flow in a porous N2 layer with a block size on the order of a meter can supply the required amount of gas to a source region about 1 km in radius. The decline of gas output to steady state may occur over a period comparable with the inferred active geyser lifetime of 5 earth years. The required subsurface permeability may be maintained by thermal fracturing of the residual N2 polar cap. A lower limit on geyser source radius of about 50 to 100 m predicted by a theory of negatively buoyant jets is not readily attained.

Kirk, Randolph L.

The subsurface character of Meteor Crater, Arizona, as determined by ground-probing radar

The first results are presented from a ground-probing-radar survey of the subsurface structure of the Meteor Crater (Arizona) and the surrounding ejecta blanket. Five ground-probing radar transects were conducted, including three complete north-south transects of the interior floor of the crater and a partial east-west transect, connecting the three north-south surveys; the fifth transect was exterior to the crater. A number of subsurface dielectric reflectors were identified in both the interior and exterior transects of the Meteor Crater. The depths of most of these reflectors in the interior transects corresponds to lithological boundaries known from previous data from drilling and shaft excavations. However, some of the reflectors, e.g., the horizontal reflectors within the allochthonous breccia lens, were not known from previous work.

Pilon, J. A.

On the possibility of chemosynthetic ecosystems in subsurface habitats on Mars

Recent discoveries of nonphotosynthetic microbial ecosystems on earth have prompted the present reexamination of the prospects for microbial life on Mars, where well-protected subsurface niches associated with hydrothermal activity could have furnished a refuge after surface conditions became inhospitable. It is noted that extensive geological features attest to widespread ground ice-volcanism interactions. Attention is given to the possibility of anaerobic systems employing CO2 as the primary source of carbon, and liquid water furnished by melted subsurface permafrost. Gases from deep volcanic activity could effect reduction, thereby establishing a chemolithoautotrophic basis for a methanogenic or acetogenic and sulfur-based ecology microbial community.

Boston, Penelope J.

A study of subsurface crack initiation produced by rolling contact fatigue

Results of subsurface crack initiation studies produced by pure rolling contact fatigue in 7075-T6 aluminum alloy are presented in this article. Microstructural changes and subsequent crack initiation below the contacting surface in cylindrical test specimens subjected to repeated rolling contact are illustrated. The rolling conditions are simulated in a three-dimensional elastic-plastic finite element model in order to estimate the plastic strains and residual stresses in the test material. The numerically estimated distribution of plastic strains in the model correlate well with the extent of microstructural changes observed in the test specimen. Results also indicate that a combination of plastic strains and low values of residual stresses is conducive to subsurface crack initiation and growth.

Kumar, Arun M.

Columnar and subsurface silicide growth with novel molecular beam epitaxy techniques

We have found novel growth modes for epitaxial CoSi2 at high temperatures coupled with Si-rich flux ratios or low deposition rates. In the first of these modes, codeposition of metal and Si at 600-800 C with excess Si leads to the formation of epitaxial silicide columns surrounded by single-crystal Si. During the initial stages of the deposition, the excess Si grows homoepitaxially in between the silicide, which forms islands, so that the lateral growth of the islands is confined. Once a template layer is established by this process, columns of silicide form as a result of selective epitaxy of silicide on silicide and Si on Si. This growth process allows nanometer control over silicide particles in three dimensions. In the second of these modes, a columnar silicide seed layer is used as a template to nucleate subsurface growth of CoSi2. With a 100 nm Si layer covering CoSi2 seeds, Co deposited at 800C and 0.01 nm/s diffuses down to grow on the buried seeds rather than nucleating surface silicide islands. For thicker Si caps or higher deposition rates, the surface concentration of Co exceeds the critical concentration for nucleation of islands, preventing this subsurface growth mode from occurring. Using this technique, single-crystal layers of CoSi2 buried under single-crystal Si caps have been grown.

Fathauer, R. W.

Young Impact Craters as Potential Sites for the Exploration of the Martian Subsurface

Orbiter and lander data indicate that a global, oxidizing regolith may blanket the surface of Mars. New sub-km crater counts by Hartmann indicate that an impact-gardened regolith may exist to a depth of at least 15 m (assuming a mean surface age of 2 Gyr), although the original meter-scale geology may still persist at certain locations such as the outflow channel of the Pathfinder landing site. The pervasive regolith appears to have an aeolian-mobilized component which may frustrate attempts to find key minerals such as carbonates or nitrates. It may also stymie searches for physical and chemical signs of past or present life. Various mechanical (penetrators, drills) means of obtaining access to the subsurface have been proposed: Here I propose to let Nature do the work by using a young impact crater. Both the nearby ejecta blanket and the crater rim may provide freshly exposed subsurface material. The crater must be large enough to penetrate the regolith but still young enough that chemical and physical weathering of exposed material is minor. A high latitude site may be preferable since organics may oxidize much more slowly at low temperatures. The tradeoffs in crater and site selection are presented, and possible crater exploration strategies are suggested.

Gaidos, E. J.

Possibilities of Using MARSES Instrument for Long-Term Monitoring and Subsurface Studies in Arctic and Arid Lands

The Mars Electromagnetic Sounding Experiment (MARSES) is the sounding instrument developed of searching for groundwater, water-ice or permafrost layers existing in some depth under the visible surface in the dry lands of Mars. One of the more important challenges facing natural resource managers today is how to identify, measure and monitoring the cumulative impacts of land use decisions across space and time. The secondary task is to measure the soil properties of Martian subsurface, which includes porosity, electrical resistance of the liquid phase, thermal conductivity, temperature dependence. A main task of the MARSES monitoring system is to examine changes in the subsurface properties of local areas regolith on the Martian surface on the base of the database of various soil slices in terrestrial conditions. Additional information is contained in the original extended abstract.

Ozorovich, Y. R.

Water-Searchers: A Reconfigurable and Self Sustaining Army of Subsurface Exploration Robots Searching for Water/Ice Using Multiple Sensors

Perhaps the most promising site for extant life on Mars today is where subsurface water has been maintained. Therefore, searching for underground water will provide a good chance to find evidence of life on Mars. The following are scientific/engineering questions that we want to answer using our approach: (1) Is there subsurface water/ice? How deep is it? How much is there? Is it frozen? (2) What kinds of underground layers exist in the Martian crust? (3) What is the density of Martian soil or regolith? Can we dig into it? Should we drill into it? (4) Can a sudden release of underground water occur if a big asteroid hits Mars? Our approach provides essential information to answer these questions. Moreover, dependence on the water content and depth in soil, not only resultant scientific conclusions but also proper digging/drilling methods, are suggested. 'How much water is in the Martian soil?' There can be several possibilities: (1) high water content that is enough to form permafrost; (2) low water content that is not enough to form permafrost; or (3) different layers with different moisture contents. 'How deep should a rover dig into soil to find water/ice?' The exact size-frequency distribution has not been measured for the soil particles. On-board sensors can provide not only the water content but also the density (or porosity) of Martian soil as a function of depth.

Youk, G. U.

Effects of Potassium Permanganate Oxidation on Subsurface Microbial Activity

In situ chemical oxidation has the potential for degrading large quantities of organic contaminants and can be more effective and timely than traditional ex situ treatment methods. However, there is a need to better characterize the potential effects of this treatment on natural processes. This study focuses on potential inhibition to anaerobic dechlorination of trichloroethene (TCE) in soils from a large manufacturing facility as a result of in situ oxidation using potassium permanganate (KMn04)Previous microcosm studies established that natural attenuation occurs on-site and that it is enhanced by the addition of ethanol to the system. A potential remediation scheme for the site involves the use of potassium permanganate to reduce levels of TCE in heavily contaminated areas, then to inject ethanol into the system to "neutralize" excess oxidant and enhance microbial degradation. However, it is currently unknown whether the exposure of indigenous microbial populations to potassium permanganate may adversely affect biological reductive dechlorination by these microorganisms. Consequently, additional microcosm studies were conducted to evaluate this remediation scheme and assess the effect of potassium permanganate addition on biological reductive dechlorination of TCE. Samples of subsurface soil and groundwater were collected from a TCE-impacted area of the site. A portion of the soil was pretreated with nutrients and ethanol to stimulate microbial activity, while the remainder of the soil was left unamended. Soil/groundwater microcosms were prepared in sealed vials using the nutrient-amended and unamended soils, and the effects of potassium permanganate addition were evaluated using two permanganate concentrations (0.8 and 2.4 percent) and two contact times (1 and 3 weeks). TCE was then re-added to each microcosm and TCE and dichloroethene (DCE) concentrations were monitored to determine the degree to which microbial dechlorination occurred following chemical oxidation. Evidence of microbial degradation was generally detected within four weeks after TCE addition. Increases in DCE concentrations were consistent with decreases in TCE. The concentration of TCE in the nutrient-amended samples exposed to 2.4% KMnO4 for one week degraded somewhat more slowly than the samples exposed to the 0.8% KMnO4. The rates of degradation did not correlate with the length of KMn04 exposure for the nutrient-amended microcosms. Microbial degradation of TCE in the unamended microcosms was generally similar to that observed in the nutrient-amended microcosms. One treatment condition (unamended, one week exposure, 2.4% KMnO4) was exposed to elevated levels of ethanol and showed little evidence of degradation. It is suspected that the high levels of ethanol were toxic to the microorganisms. The results of the study indicate that exposure of indigenous soil and groundwater microbial populations to KMnO4 at concentrations of 0.8 to 2.4% do not impair the ability of the microbial populations to dechlorinate TCE. Consequently, the combination of chemical oxidation followed by enhanced biological reductive dechlorination appears to be a viable remedial strategy for highly-impacted subsurface areas of the site.

Rowland, Martin A.

Possibilities of Using MARSES Instrument for Long-Term Monitoring and Subsurface Studies in Arctic and Arid Lands

The MARSES is the sounding instrument developed of searching for groundwater, water-ice or permafrost layers existing in some depth under the visible surface in the dry lands of Mars. One of the more important challenges facing natural resource managers today is how to identify, measure and monitoring the cumulative impacts of land use decisions across space and time. The secondary task is to measure the soil properties of Martian subsurface, which includes porosity, electrical resistance of the liquid phase, thermal conductivity, temperature dependence. A main task of the MARSES monitoring system is to examine changes in the subsurface properties of local areas regolith on the Martian surface on the base of the database of various soil slices in terrestrial conditions

Ozorovich, Y. R.

Microbial Fossils from Terrestrial Subsurface Hydrothermal Environments: Examples and Implications for Mars

The recognition of biological signatures in ancient epithermal deposits has special relevance for studies of early blaspheme evolution and in exploring for past life on Mars. Recently, proposals for the existence of an extensive subsurface blaspheme on Earth, dominated by chemoautotrophic microbial life, has gained prominence. However, reports of fossilized microbial remains, or biosedimentary structures (e.g. stromatolites) from the deposits of ancient subsurface systems, are rare. Microbial preservation is favoured where high population densities co-exist with rapid mineral precipitation. Near-surface epithetical systems with strong gradients in temperature and redox are good candidates for the abundant growth and fossilization of microorganisms, and are also favorable environments for the precipitation of ore minerals. Therefore, we might expect microbial remain, to be particularly well preserved in various kinds of hydrothermal and diagenetic mineral precipitates that formed below the upper temperature limit for life (approx. 120 C).

Hofmann, Beda A.