Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Surface pressure data on a series of analytic forebodies at Mach numbers from 1.70 to 4.50 and combined angles of attack and sideslip

Tabulated surface pressure data for a series of four forebodies which have analytically defined cross sections and which are based on a parabolic arc profile having a 20 deg half angle at the nose are presented without analysis. The first forebody has a circular cross section, and the second has a cross section which is an ellipse with an axis ratio of 2/1. The third has a cross section defined by a lobed analytic curve. The fourth forebody has cross sections which develop smoothly from circular at the pointed nose through the lobed analytic curve and back to circular at the aft end. The data generally cover angles of attack from -5 deg to 20 deg at angles of sideslip from 0 deg to 5 deg for Mach numbers of 1.70, 2.50, 3.95, and 4.50 at a constant Reynolds number.

Townsend, J. C.↗
NASA NTRS1978

Low surface pressure models for Titan's atmosphere

The inversion model for the atmosphere of Titan is reviewed. The basic features of the model are: a cold surface (80 K), a warm stratosphere (160 K) and a low surface pressure (20 mbar). The model is consistent with all existing thermal infrared spectrophotometry, but it cannot preclude the existence of an opaque, cloud, thick atmosphere. The model excludes other gases than methane as bulk constituents. Radio wavelengths observations, including recent data from the very large array, are discussed. These long wavelength observations may be the only direct means of sampling the surface environment before an entry probe or flyby.

Caldwell, J.↗
NASA NTRS1976

Surface pressure measurements on a series of two-dimensional yawmeter bodies

It is shown that certain two dimensional bodies exist having a sensitivity of surface pressure to flow direction which is much higher than for currently used two dimensional yawmeters. A body having a simple cross sectional shape was selected for experimental evaluation at low Mach number, but at a typical Reynolds number for such instruments.

Goodyer, M. J.↗
NASA NTRS1979

Technique for remotely measuring surface pressure from a satellite using a multicolor laser ranging system

The optical path length from a satellite to the earth's surface is strongly dependent on the atmospheric pressure along the propagation path. It is shown that surface pressures can be measured by the use of a multicolor laser ranging system to observe the change with wavelength in the optical path length from the satellite to a ground target. Equations are derived which relate surface pressure to the differential path lengths. In addition, the accuracy of the pressure measurement is evaluated in terms of the ranging system parameters. It is concluded that the results indicate that pressure accuracies of a few millibars appear feasible.

Gardner, C. S.↗
NASA NTRS2015

Liquid Hydrogen Propellant Tank Sub-Surface Pressurization with Gaseous Helium

A series of tests were conducted to evaluate the performance of a propellant tank pressurization system with the pressurant diffuser intentionally submerged beneath the surface of the liquid. Propellant tanks and pressurization systems are typically designed with the diffuser positioned to apply pressurant gas directly into the tank ullage space when the liquid propellant is settled. Space vehicles, and potentially propellant depots, may need to conduct tank pressurization operations in micro‐gravity environments where the exact location of the liquid relative to the diffuser is not well understood. If the diffuser is positioned to supply pressurant gas directly to the tank ullage space when the propellant is settled, then it may become partially or completely submerged when the liquid becomes unsettled in a microgravity environment. In such case, the pressurization system performance will be adversely affected requiring additional pressurant mass and longer pressurization times. This series of tests compares and evaluates pressurization system performance using the conventional method of supplying pressurant gas directly to the propellant tank ullage, and then supplying pressurant gas beneath the liquid surface. The pressurization tests were conducted on the Engineering Development Unit (EDU) located at Test Stand 300 at NASA Marshall Space Flight Center (MSFC). EDU is a ground based Cryogenic Fluid Management (CFM) test article supported by Glenn Research Center (GRC) and MSFC. A 150 ft3 propellant tank was filled with liquid hydrogen (LH2). The pressurization system used regulated ambient helium (GHe) as a pressurant, a variable position valve to maintain flow rate, and two identical independent pressurant diffusers. The ullage diffuser was located in the forward end of the tank and was completely exposed to the tank ullage. The submerged diffuser was located in the aft end of the tank and was completely submerged when the tank liquid level was 10% or greater. The ullage diffuser tests were conducted as a baseline to evaluate the performance of the pressurization system, and the submerged diffuser tests showed how the performance of the pressurization system was compromised when the diffuser was submerged in LH2. The test results are evaluated and compared, and included in this report for various propellant tank fill levels.

Stephens, J. R.↗
NASA NTRS1988

Measurement of Unsteady Blade Surface Pressure on a Single Rotation Large Scale Advanced Prop-fan with Angular and Wake Inflow at Mach Numbers from 0.02 to 0.70

Unsteady blade surface pressure data for the Large-Scale Advanced Prop-Fan (LAP) blade operation with angular inflow, wake inflow and uniform flow over a range of inflow Mach numbers of 0.02 to 0.70 is provided. The data are presented as Fourier coefficients for the first 35 harmonics of shaft rotational frequency. Also presented is a brief discussion of the unsteady blade response observed at takeoff and cruise conditions with angular and wake inflow.

Bushnell, P.↗
NASA NTRS1986

Ocean surface pressure fields from satellite-sensed winds

The University of Washington's planetary boundary layer model is inverted to use remotely sensed satellite scatterometer-derived surface winds as input to calculate maritime surface pressure fields. The analysis of three different synoptic storm situations is performed using the model and is then compared to conventional National Weather Service analyses. Agreement is good. Isolation of the PBL secondary flow, stratification and thermal wind effects in the model revealed that each may be significant under certain conditions. However, the model shows sensitivity to the thermodynamic features only in a general sense and even a neutral stratification solution gives a good approximation. The high density of the scatterometer data produces mesoscale (hundreds of kilometers) dynamic details, which cannot be confirmed by conventional data at this stage.

Brown, Robert A.↗
NASA NTRS1989

Prediction of unsteady blade surface pressures on an advanced propeller at an angle of attack

The paper considers the numerical solution of the unsteady, three-dimensional, Euler equations to obtain the blade surface pressures of an advanced propeller at an angle of attack. The specific configuration considered is the SR7L propeller at cruise conditions with a 4.6 deg inflow angle corresponding to the +2 deg nacelle tilt of the Propeller Test Assessment (PTA) flight test condition. The results indicate nearly sinusoidal response of the blade loading, with angle of attack. For the first time, detailed variations of the chordwise loading as a function of azimuthal angle are presented. It is observed that the blade is lightly loaded for part of the revolution and shocks appear from hub to about 80 percent radial station for the highly loaded portion of the revolution.

Nallasamy, M.↗
NASA NTRS1989

Prediction of Unsteady Blade Surface Pressures on an Advanced Propeller at an Angle of Attack

The numerical solution of the unsteady, three-dimensional, Euler equations is considered in order to obtain the blade surface pressures of an advanced propeller at an angle of attack. The specific configuration considered is the SR7L propeller at cruise conditions with a 4.6 deg inflow angle corresponding to the plus 2 deg nacelle tilt of the Propeller Test Assessment (PTA) flight test condition. The results indicate nearly sinusoidal response of the blade loading, with angle of attack. For the first time, detailed variations of the chordwise loading as a function of azimuthal angle are presented. It is observed that the blade is lightly loaded for part of the revolution and shocks appear from hub to about 80 percent radial station for the highly loaded portion of the revolution.

Nallasamy, M.↗
NASA NTRS2005

Special cases of AIRS v4.0.x retrievals: missing forecast surface pressure and regression-only retrieval

This memo examines the differences that can be expected when performing two special cases of retrievals with the v.4.0.x PGE: (1) retrivals without the surface pressure from the NOAA Global Forecast System (GFS) and (2) regression only retrievals. An understanding of these differences is important for users who may want to give up some accuracy in the retrieval in exchange for a rapid solution.

AIRS↗
NASA NTRS1975

Surface pressure and wake flow fluctuations in a supercritical airfoil flowfield

Nonsteady features of a Whitcomb-type supercritical airfoil flowfield were studied in a series of transonic wind tunnel experiments. Data consisted of mean and fluctuating pressures on the airfoil and in the free stream, velocity fluctuations in the wake region, and airfoil vibrations. Fluctuation data were analyzed statistically for intensity, frequency content, and spatial coherence; variations in these parameters were correlated with changes in the mean airfoil flowfield. Surface pressure fluctuation intensity was influenced primarily by the location and motion of the upper-surface shock, the existence of separation, and (downstream of the shock) the development and upstream propagation of 'shocklets'. Power spectra of pressure fluctuations showed characteristics differences up- and downstream of the shock. Chordwise and spanwise coherences were considerably reduced in the presence of separation. Downwash fluctuations at the edge of the wake were noticeably affected only by the development of trailing-edge flow separation.

Roos, F. W.↗
NASA NTRS1972

Surface pressure and inviscid flow field properties of the McDonnell-Douglas delta-wing orbiter for nominal Mach number of 8, Volume 1

The results of a wind tunnel test program to determine the surface pressures and flow distribution on the McDonnell Douglas Orbiter configuration are presented. Tests were conducted in hypersonic wind tunnel at Mach 8. The freestream unit Reynolds number was 3.7 time one million per foot. Angle of attack was varied from 10 degrees to 60 degrees in 10 degree increments.

Warmbrod, J. D.↗
NASA NTRS1976

Surface-pressure fluctuations associated with aerodynamic noise on the space shuttle launch configuration at transonic and supersonic speeds

A 0.035-scale space shuttle model was recently tested at Ames Research Center to define the fluctuating surface pressures during the launch phase of the full-scale vehicle. A 120-channel data acquisition and reduction system was employed to obtain fluctuating pressure measurements from 240 pressure transducers in two separate data passes. Time histories from all transducers were recorded on four 32-track FM tape recorders. A minicomputer was used to compute and record on-line rms values, the fluctuating pressure coefficient, and full-scale dB levels. The minicomputer also partially controlled the test conditions and fully controlled all data acquisition sequences, thus greatly improving the efficiency of test operations. This paper presents details of the tests and illustrates the fluctuating pressures that will occur on the space shuttle and launch vehicle.

Hanly, R. D.↗
NASA NTRS2002

Simple Fabry-Perot based Instrument for Surface Pressure Sensing from Space

Mitchel and O'Brien observed in 1989 that a passive satellite measurement using the oxygen A band could exhibit a precision of better than 1% when used to make a surface pressure measurement. I will present a design and performance simulation for a Fabry-Perot interferometer based instrument which should exceed this level of performance. The design is small, inexpensive, and rugged. Preliminary results from a laboratory prototype of the instrument will be presented.

Heaps, William S.↗
NASA NTRS1972

Surface pressure and inviscid flow field properties of the North American Rockwell delta-wing orbiter for nominal Mach number of 8, volume 2

The results are presented of a wind tunnel test program to determine surface pressures and flow field properties on the space shuttle orbiter configuration. The tests were conducted in September 1971. Data were obtained at a nominal Mach number of 8 and a free stream unit Reynolds number of 3.7 million per foot. Angle of attack was varied from 10 to 50 deg in 10-deg increments.

Matthews, R. K.↗
NASA NTRS1992

Flight testing of a luminescent surface pressure sensor

NASA ARC has conducted flight tests of a new type of aerodynamic pressure sensor based on a luminescent surface coating. Flights were conducted at the NASA ARC-Dryden Flight Research Facility. The luminescent pressure sensor is based on a surface coating which, when illuminated with ultraviolet light, emits visible light with an intensity dependent on the local air pressure on the surface. This technique makes it possible to obtain pressure data over the entire surface of an aircraft, as opposed to conventional instrumentation, which can only make measurements at pre-selected points. The objective of the flight tests was to evaluate the effectiveness and practicality of a luminescent pressure sensor in the actual flight environment. A luminescent pressure sensor was installed on a fin, the Flight Test Fixture (FTF), that is attached to the underside of an F-104 aircraft. The response of one particular surface coating was evaluated at low supersonic Mach numbers (M = 1.0-1.6) in order to provide an initial estimate of the sensor's capabilities. This memo describes the test approach, the techniques used, and the pressure sensor's behavior under flight conditions. A direct comparison between data provided by the luminescent pressure sensor and that produced by conventional pressure instrumentation shows that the luminescent sensor can provide quantitative data under flight conditions. However, the test results also show that the sensor has a number of limitations which must be addressed if this technique is to prove useful in the flight environment.

Mclachlan, B. G.↗