SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Tall structures play and important role in development of winter time lightning flashes.To what extent still needs to be assessed. Tower initiated flashes typically occur as banded structures pass near/overhead. Hi resolution RHI s from polarimetric radar show that the lightning has a tendency to propagate through layered structures within these snowstorms.
Preliminary designs of advanced lightweight permanent magnet direct drive generators for offshore and “tall wind” onshore applications utilizing funding from DOE/EERE/WETO were developed by WEG, RTX, NREL and supporting partners. This work significantly reduces tower head mass, increases efficiency, reduces the rare earth content of the generator, and leads to additional turbine system benefits that improve competitiveness, such as the use of taller towers onshore and less expensive foundations (“hull”) for floating offshore. The end result is an approximately 10% reduction of LCOE in both cases, which could significantly improve competitiveness and support the EERE/DOE goal of promoting US manufacturing.
The ambulance antenna shown is a specially designed system that allows satellite-relayed two-way communications between a moving emergency vehicle and a hospital emergency room. It is a key component of a demonstration program aimed at showing how emergency medical service can be provided to people in remote rural areas. Satellite communication permits immediate, hospital- guided treatment of heart attacks or other emergencies by ambulance personnel, saving vital time when the scene of the emergency is remote from the hospital. If widely adopted, the system could save tens of thousands of lives annually in the U.S. alone, medical experts say. The problem in conventional communication with rural areas is the fact that radio signals travel in line of sight. They may be blocked by tall buildings, hills and mountains, or even by the curvature of the Earth, so signal range is sharply limited. Microwave relay towers could solve the problem, but a complete network of repeater towers would be extremely expensive. The satellite provides an obstruction-free relay station in space.
FLUXNET comprises globally distributed eddy-covariance-based estimates of carbon fluxes between the biosphere and the atmosphere. Since eddy covariance flux towers have a relatively small footprint and are distributed unevenly across the world, upscaling the observations is necessary to obtain global-scale estimates of biosphere–atmosphere exchange. Based on cross-consistency checks with atmospheric inversions, sun-induced fluorescence (SIF) and dynamic global vegetation models (DGVMs), here we provide a systematic assessment of the latest upscaling efforts for gross primary production (GPP) and net ecosystem exchange (NEE) of the FLUXCOM initiative, where different machine learning methods, forcing data sets and sets of predictor variables were employed. Spatial patterns of mean GPP are consistent across FLUXCOM and DGVM ensembles (R 2 >0.94 at 1° spatial resolution) while the majority of DGVMs show, for 70 % of the land surface, values outside the FLUXCOM range. Global mean GPP magnitudes for 2008–2010 from FLUXCOM members vary within 106 and 130 PgC yr -1 with the largest uncertainty in the tropics. Seasonal variations in independent SIF estimates agree better with FLUXCOM GPP (mean global pixel-wise R 2 ~0.75) than with GPP from DGVMs (mean global pixel-wise R 2 ~0.6). Seasonal variations in FLUXCOM NEE show good consistency with atmospheric inversion-based net land carbon fluxes, particularly for temperate and boreal regions (R 2 >0.92). Interannual variability of global NEE in FLUXCOM is underestimated compared to inversions and DGVMs. The FLUXCOM version which also uses meteorological inputs shows a strong co-variation in interannual patterns with inversions (R 2 =0.87 for 2001–2010). Mean regional NEE from FLUXCOM shows larger uptake than inversion and DGVM-based estimates, particularly in the tropics with discrepancies of up to several hundred grammes of carbon per square metre per year. These discrepancies can only partly be reconciled by carbon loss pathways that are implicit in inversions but not captured by the flux tower measurements such as carbon emissions from fires and water bodies. We hypothesize that a combination of systematic biases in the underlying eddy covariance data, in particular in tall tropical forests, and a lack of site history effects on NEE in FLUXCOM are likely responsible for the too strong tropical carbon sink estimated by FLUXCOM. Furthermore, as FLUXCOM does not account for CO 2 fertilization effects, carbon flux trends are not realistic. Overall, current FLUXCOM estimates of mean annual and seasonal cycles of GPP as well as seasonal NEE variations provide useful constraints of global carbon cycling, while interannual variability patterns from FLUXCOM are valuable but require cautious interpretation. Exploring the diversity of Earth observation data and of machine learning concepts along with improved quality and quantity of flux tower measurements will facilitate further improvements of the FLUXCOM approach overall.
This is the AmeriFlux version of the carbon flux data for the site US-PFc NW2 Aspen-1 CHEESEHEAD 2019. Site Description - This tower (12m Rohn) is located in the northwestern quadrant of the 10 x 10km study domain. It is located in a forest of short aspen (3m tall). Several older aspen and conifers are interspersed within the regrowing aspen forest (15-20m tall).
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-PFc NW2 Aspen-1 CHEESEHEAD 2019. This is the FLUXNET version of the carbon flux data for the site US-PFc NW2 Aspen-1 CHEESEHEAD 2019 produced by applying the standard ONEFlux (1F) software. Site Description - This tower (12m Rohn) is located in the northwestern quadrant of the 10 x 10km study domain. It is located in a forest of short aspen (3m tall). Several older aspen and conifers are interspersed within the regrowing aspen forest (15-20m tall).
A system was developed to measure the sway of the Vehicle Assembly Building (VAB) at Kennedy Space Center. This system was installed in the VAB and gathered more than one total year of data. The building movement was correlated with measurements provided by three wind towers in order to determine the maximum deflection of the building during high-wind events. The VAB owners were in the process of obtaining new platforms for use in assembling very tall rockets when analysis of the VAB showed that a high wind could move the building sufficiently that an upper platform might impact a rocket. The problem arises because safety requires a relatively small gap between the platform and the rocket, while a large enough gap is needed to ensure that stacking tolerances prevent contact between the rocket and the platform. This only leaves an inch or two (approximately 2 to 5 cm) of total clearance, so when the analysis showed that more than a couple of inches of motion could occur in a high wind, there was a potential for damaging the rocket. The KSC Applied Physics Laboratory was asked to install a system in the VAB that could measure the motion of the building in high winds to determine the actual building sway. The motion of the VAB roof under wind load was measured optically, and under analysis, it was determined that a relatively large-aperture optical system would be required to reduce diffraction effects to less than a small fraction of an inch (approximately mm) at a distance of 500 ft (≈150 m). A 10-in. (approximately 250 mm) telescope was placed on the floor of the building, looking at the ceiling. On the ceiling, a flat plate with three white LEDs was mounted in an "L" shape, such that the telescope was essentially looking at three stars. Software was written to track the motion of these three points using an image processing system. This provided a better than 1/10-in. (approximately 2.5-mm) 2D measurement faster than once a second. Data was downloaded once a month for comparison with the wind tower data. The system was fully operational and provided enough data to show that the VAB will only move 1 in. (approximately 2.5 cm) at the ceiling under 70-knot winds. Adjustable platforms are not required.
NASA continues to explore new launch vehicle concepts that will carry astronauts to low- Earth orbit to replace the soon-to-be retired Space Transportation System (STS) shuttle. A tall vertically stacked launch vehicle (> or =300 ft) is exposed to the natural environment while positioned on the launch pad. Varying directional winds and vortex shedding cause the vehicle to sway in an oscillating motion. Ground crews working high on the tower and inside the vehicle during launch preparations will be subjected to this motion while conducting critical closeout tasks such as mating fluid and electrical connectors and carrying heavy objects. NASA has not experienced performing these tasks in such environments since the Saturn V, which was serviced from a movable (but rigid) service structure; commercial launchers are likewise attended by a service structure that moves away from the vehicle for launch. There is concern that vehicle displacement may hinder ground crew operations, impact the ground system designs, and ultimately affect launch availability. The vehicle sway assessment objective is to replicate predicted frequencies and displacements of these tall vehicles, examine typical ground crew tasks, and provide insight into potential vehicle design considerations and ground crew performance guidelines. This paper outlines the methodology, configurations, and motion testing performed while conducting the vehicle displacement assessment that will be used as a Technical Memorandum for future vertically stacked vehicle designs.
An new type of electric field instrumentation was developed for lighting prediction at KSC. Currently, it is being installed at several government laboratories and is being made available to the public. It has important advantages over the previous method for measuring electric fields with motor driven field mills: (1) it has no moving parts and requires little maintenance compared to rotating machinery; (2) it is unaffected by rain, snow, sand, or insects, all of which can influence field mills; and (3) the lightweight sensor can be mounted easily on a tall mast. By mounting the instrumentation on a tall mast the instrumentation is placed above much of the blanket of point discharge ions that are emitted from objects on the ground during thunderstorms. This space charge limits the ability of any ground based electric field sensor to accurately measure cloud electric fields which produce lightning. The elevated mounting was demonstrated to significantly improve monitoring of thunderstorm electric fields. This instrumentation measures the atmospheric potential relative to earth at a corona needle sensor on top of a mast which normally is mounted on a tower or roof. The needle is kept in corona at all times by a low power high voltage power supply. This produces a small cloud of ions around the needle allowing a current to flow. Measurement of the current provides the atmospheric potential. The potential divided by the height of the needle above the ground is proportional to the average electric field between the needle and earth. The potential on top of a tall pole or above a rooftop is more representative of the intensity of cloud electrification than electric field measurements made at ground level. Photographs that depict the computer terminal, video display of a two sensor system, and the individual components installed on a tower are presented.
The effects of gravity on the bubble formation in an annular jet were studied. The experiments were conducted in the 2.2-second drop tower at the NASA Glenn Research Center. Terrestrial gravity experiments were conducted at the Fluid Dynamics Research Laboratory at the University of Oklahoma. Stainless steel tubing with inner diameters of 1/8" (gas inner annulus) and 5/16" (liquid outer annulus) served as the injector. A rectangular test section, 6" x 6" x 14" tall, made out of half-inch thick Lexan was used. Images of the annular jet were acquired using a high-speed camera. The effects of gravity and varying liquid and gas flow rates on bubble size, wavelength, and breakup length were documented. In general, the bubble diameter was found to be larger in terrestrial gravity than in microgravity for varying Weber numbers (0.05 - 0.16 and 5 - 11) and liquid flow rates (1.5 ft/s - 3.0 ft/s). The wavelength was found to be larger in terrestrial gravity than in microgravity, but remained constant for varying Weber numbers. For low Weber numbers (0.05 - 0.16), the breakup length in microgravity was significantly higher than in terrestrial gravity. Comparison with linear stability analysis showed estimated bubble sizes within 9% of experimental bubble sizes. Bubble size compared to other terrestrial gravity experiments with same flow conditions showed distinct differences in bubble size, which displayed the importance of injector geometry on bubble formation.
The BOREAS TGB-8 team collected data to investigate the controls over NMHC fluxes from boreal forest tree species. This data set includes measurements of photosynthetic rates at mature jack pine and black spruce sites. The data were collected at the OJP and OBS tower flux locations in the BOREAS SSA. These areas contained mature stands of jack pine and black spruce and were the focal sites in the BOREAS program for studies of biosphere/atmosphere exchange from these two habitat types. The OBS site is situated in a black spruce/sphagnum bog with the largest trees 155 years old and 10-15 m tall. The OJP site is in a jack pine forest, 80 to 120 years old, which lies on a sandy bench of glacial outwash with the largest tree standing 15 m tall. Temporally, the data cover the period of 24-May-1994 to 19-Sep-1994. The data are stored in tabular ASCII files.
The BOREAS TGB-8 team collected data to investigate the controls over NMHC fluxes from boreal forest tree species. This data set includes measurements of starch concentrations in foliar samples at mature jack pine and black spruce sites. The data were collected at the OJP and OBS tower flux locations in the BOREAS SSA. These areas contained mature stands of jack pine and black spruce and were the focal sites in the BOREAS program for studies of biosphere/atmosphere exchange from these two habitat types. The OBS site is situated in a black spruce/sphagnum bog with the largest trees 155 years old and 10-15 m tall. The OJP site is in a jack pine forest, 80 to 120 years old, which lies on a sandy bench of glacial outwash with the largest tree standing 15 m tall. Temporally, the data cover the period of 24-May-1994 to 19-Sep-1994. The data are stored in tabular ASCII files.
The BOREAS TGB-8 team collected data to investigate the controls over NMHC fluxes from boreal forest tree species. This data set contains measurements of monoterpene concentrations in collected foliar gas emissions and foliar samples. The data were collected at the OJP and OBS tower flux sites in the SSA and were the locus for the monoterpene emission measurements. These areas contained mature stands of jack pine and black spruce and were the focal sites in the BOREAS program for studies of biosphere/atmosphere exchange from these two habitat types. The OBS site is situated in a black spruce/sphagnum bog with the largest trees 155 years old and 10-15 m tall. The OJP site is in a jack pine forest, 80 to 120 years old, which lies on a sandy bench of glacial outwash with the largest tree standing 15 m tall. Temporally, the data cover the period of 24-May-1994 to 19-Sep-1994. The data are stored in tabular ASCII files.
Arctic warming is altering vegetation and carbon dynamics with global implications, yet Earth System Model (ESM) predictions in the Arctic remain highly uncertain, in part due to historically limited data for model parameterization and validation. As such, ESMs typically represent Arctic ecosystems in an oversimplified manner. Recently, nine plant functional types (PFTs) designed to realistically represent tundra vegetation were integrated into the Energy Exascale Earth System Model (E3SM) Land Model (ELM) and parameterized using plot-scale observations from a single site. Additional evaluation was needed to determine their transferability across the Arctic. Here, in this study, we evaluated whether refined representation of tundra vegetation improved model accuracy by conducting spatially explicit 100 × 100 m resolution ELM simulations on Alaska's Seward Peninsula. Simulations with the default two-PFT configuration and with the nine Arctic-specific PFTs were benchmarked against observations of net ecosystem exchange, gross primary production, and aboveground biomass from multiple data streams including an eddy covariance flux tower, flux chambers, and aircraft and unoccupied aerial system hyperspectral remote sensing. Evaluation revealed that Arctic-specific PFT simulations produced more realistic landscape-level carbon exchanges, and better captured observed heterogeneity in biomass and productivity, explaining 60%–70% of spatial variance (R 2 = 0.6–0.7) compared to just 12%–18% (R 2 = 0.12–0.18) with the default configuration. However, the refined model failed to reproduce observed aboveground biomass for highly productive alder-willow communities, requiring further evaluation of carbon allocation parameterizations for tall shrubs that are increasingly expanding across tundra landscapes. Our results demonstrate that enhanced representation of vegetation heterogeneity boosts predictive understanding of tundra carbon dynamics, facilitating regional to pan-Arctic model and remote-sensing scaling.