Search NASA⌕ Search

SEARCH · Search NASA

Results for “test functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Rhodium‐Catalyzed Oxidative Alkenylation of Naphthalene: Factors That Influence Reaction at the β‐ versus α‐Position

The catalyst precursor [(η 2 -C 2 H 4 ) 2 Rh(μ-OAc)] 2 and in situ oxidant Cu(OPiv) 2 (OPiv = t-BuCOO – ) convert naphthalene and olefins (i.e., ethylene and propylene) to alkenylnaphthalenes. Under all reaction conditions tested, the functionalization is selective for the β-position of naphthalene with the highest observed β:α ratio >20:1. The β-selectivity is catalyst controlled, but oxidant identity, ethylene pressure, and olefin identity influence the ratio of β-alkenylation to α-alkenylation. The concentration of HOPiv and naphthalene do not have an effect on the β:α ratio under the reaction conditions tested. Arenes similar to naphthalene (i.e., o-xylene and 1,2,3,4-tetrahydronaphthalene) give quantitative selectivity for alkenylation at the position β to the substituent. Using propylene as the olefin for naphthalene alkenylation, the β:α ratio is 32(7):1. and the anti-Markovnikov to Markovnikov ratio is 16(2):1.

Alkenes↗
DOE OSTI2024

The dark matter profile of the Milky Way inferred from its circular velocity curve

ABSTRACT In this paper, we construct the circular velocity curve of the Milky Way out to ∼30 kpc, providing an updated model of the dark matter density profile. We derive precise parallaxes for 120 309 stars with a data-driven model, using APOGEE DR17 spectra combined with GaiaDR3, 2MASS, and WISE photometry. At outer galactic radii up to 30 kpc, we find a significantly faster decline in the circular velocity curve compared to the inner parts. This decline is better fit with a cored Einasto profile with a slope parameter $0.91^{+0.04}_{-0.05}$ than a generalized Navarro–Frenk–White (NFW) profile. The virial mass of the best-fitting dark matter halo profile is only $1.81^{+0.06}_{-0.05}\times 10^{11}$ M⊙, significantly lower than what a generalized NFW profile delivers. We present a study of the potential systematics, affecting mainly large radii. Such a low mass for the Galaxy is driven by the functional forms tested, given that it probes beyond our measurements. It is found to be in tension with mass measurements from globular clusters, dwarf satellites, and streams. Our best-fitting profile also lowers the expected dark matter annihilation signal flux from the galactic centre by more than an order of magnitude, compared to an NFW profile-fit. In future work, we will explore profiles with more flexible functional forms to more fully leverage the circular velocity curve and observationally constrain the properties of the Milky Way’s dark matter halo.

Ou, Xiaowei (ORCID:0000000246699967)↗
DOE OSTI2020

Aqueous solvation of the chloride ion revisited with density functional theory: impact of correlation and exchange approximations

The specificity of aqueous halide solvation is fundamental to a wide range of bulk and interfacial phenomena spanning from biology to materials science. Halide polarizability is thought to drive the ion specificity, and if so, it is essential to have an accurate description of the electronic properties of halide ions in water. To this end, the solvation of the chloride anion, Cl - has been reinvestigated with state-of-the-art density functional theory. Specifically, the PBE-D3, PBE0-D3, and SCAN functionals have been employed to probe the impact of correlation and exchange approximations. Anticipating the findings, adding exact exchange improves the electronic structure, but simultaneously significantly reduces the Cl - polarizability, resulting in an over-structured Cl–O radial distribution function (RDF) and longer water H-bond lifetimes to Cl - . SCAN does not yield as much improvement in the energetics of Cl - relative to bulk water, but does result in a smaller reduction of the polarizability and thus a less structured Cl–O RDF, which agrees better with experiment. Special consideration is therefore warranted in assessing the impact of exchange on the energy, charge density, and the charge density response when designing and testing hybrid functionals for aqueous halide solvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Modelling galaxy cluster triaxiality in stacked cluster weak lensing analyses

Counts of galaxy clusters offer a high-precision probe of cosmology, but control of systematic errors will determine the accuracy of this measurement. Using Buzzard simulations, we quantify one such systematic, the triaxiality distribution of clusters identified with the redMaPPer optical cluster finding algorithm, which was used in the Dark Energy Survey Year-1 (DES Y1) cluster cosmology analysis. We test whether redMaPPer selection biases the clusters’ shape and orientation and find that it only biases orientation, preferentially selecting clusters with their major axes oriented along the line of sight. Modelling the richness–mass relation as log-linear, we find that the log-richness amplitude ln (A) is boosted from the lowest to highest orientation bin with a significance of 14σ, while the orientation dependence of the richness-mass slope and intrinsic scatter is minimal. We also find that the weak lensing shear-profile ratios of cluster-associated dark haloes in different orientation bins resemble a ‘bottleneck’ shape that can be quantified with a Cauchy function. We test the correlation of orientation with two other leading systematics in cluster cosmology – miscentering and projection – and find a null correlation. The resulting mass bias predicted from our templates confirms the DES Y1 finding that triaxiality is a leading source of bias in cluster cosmology. However, the richness-dependence of the bias confirms that triaxiality does not fully resolve the tension at low-richness between DES Y1 cluster cosmology and other probes. Our model can be used for quantifying the impact of triaxiality bias on cosmological constraints for upcoming weak lensing surveys of galaxy clusters.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Enabling the Broader Use of MOOSE for Nuclear Energy and Other Simulation

This Final Scientific and Technical Report summarizes work performed under the Phase IIA SBIR project “Enabling the Broader Use of MOOSE for Nuclear Energy and Other Simulation” (DE-SC0020906) from August 2023 through August 2025. The objective of the Phase IIA effort was to mature and harden capabilities developed during Phase II, with the goal of enabling practical interoperability between Coreform’s isogeometric analysis (IGA) technologies and the Multiphysics Object-Oriented Simulation Environment (MOOSE), while improving robustness, performance, and scalability for complex, nuclear-relevant geometries. Over the course of Phase IIA, the project established and validated an extraction-based interoperability pathway between Coreform tools and MOOSE. A combined mesh and matrix format was defined collaboratively with MOOSE developers and integrated into the solver, enabling standard MOOSE workflows to operate on data exported from Coreform’s IGA and Flex Representation Method (FRM) pipelines. Early demonstrations validated architectural compatibility using linear solid mechanics problems, while later efforts focused on benchmark testing and external use. By the end of the project period, engineers at BWXT were able to independently set up and execute a simulation using the Coreform–MOOSE workflow and provide direct feedback that informed further refinement. In parallel, substantial effort was devoted to improving the robustness of trimmed U-spline construction for complex CAD geometries. A growing test suite of nuclear-relevant models was compiled through collaboration with multiple stakeholders and used to drive extensive bug fixing and reliability improvements. These efforts resulted in improved robustness and performance, including the addition of fallback capabilities that enhance reliability when the underlying commercial CAD kernel fails. Performance-oriented work progressed later in the project, with the development and demonstration of methods to decompose complex geometries into structured subregions and updated data representations to support more efficient solver processing. Additionally, extensive enhancements to threadsafe parallel data structures and trimming operations established a foundation for scalable processing of large assemblies. Collaboration with Sandia National Laboratories on the SGM geometric modeling kernel advanced to a functioning interface test case, positioning the workflow for future kernel integration. Overall, the Phase IIA effort successfully transitioned the project from architectural proof-of-concept to externally exercised, solver-integrated capability, while clarifying remaining technical challenges related to standardization, performance optimization, and kernel integration.

42 ENGINEERING↗
DOE OSTI2022

A fusion of the Bacteroides fragilis ferrous iron import proteins reveals a role for FeoA in stabilizing GTP-bound FeoB

Iron is an essential element for nearly all organisms, and under anoxic and/or reducing conditions, Fe 2+ is the dominant form of iron available to bacteria. The ferrous iron transport (Feo) system is the primary prokaryotic Fe 2+ import machinery, and two constituent proteins (FeoA and FeoB) are conserved across most bacterial species. However, how FeoA and FeoB function relative to one another remains enigmatic. In this work, we explored the distribution of feoAB operons encoding a fusion of FeoA tethered to the N-terminal, G-protein domain of FeoB via a connecting linker region. We hypothesized that this fusion poises FeoA to interact with FeoB to affect function. To test this hypothesis, we characterized the soluble NFeoAB fusion protein from Bacteroides fragilis, a commensal organism implicated in drug-resistant infections. Using X-ray crystallography, we determined the 1.50-Å resolution structure of BfFeoA, which adopts an SH3-like fold implicated in protein–protein interactions. Using a combination of structural modeling, small-angle X-ray scattering, and hydrogen–deuterium exchange mass spectrometry, we show that FeoA and NFeoB interact in a nucleotide-dependent manner, and we mapped the protein–protein interaction interface. Finally, using guanosine triphosphate (GTP) hydrolysis assays, we demonstrate that BfNFeoAB exhibits one of the slowest known rates of Feo-mediated GTP hydrolysis that is not potassium-stimulated. Importantly, truncation of FeoA from this fusion demonstrates that FeoA–NFeoB interactions function to stabilize the GTP-bound form of FeoB. Taken together, our work reveals a role for FeoA function in the fused FeoAB system and suggests a function for FeoA among prokaryotes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The Role of Pentaerythritol Tetranitrate (PETN) Aging in Determining Detonator Firing Characteristics

Pentaerythritol tetranitrate (PETN) is one of the most commonly used explosives for both military and mining applications. PETN is used in EBW (exploding bridge wire) and EFI (exploding foil initiator) detonator devices. Due the widespread usage of PETN, studies focusing on how the explosive changes with age, primarily its function in detonators has received particular interest. Aging studies have identified several factors that affect PETN detonator function over time, most notably the specific surface area of the explosive powder. Though small-scale studies have been performed on specific detonator systems with isolated batches of material, what is missing is a large statistically-significant study focusing on PETN aging characteristics - such as powder coarsening - and their influence on detonator performance. Herein we report the first large statistically viable PETN aging study focusing on four batches of PETN powder from the same stock of PETN using two stabilizers, polysaccharide and TriPEON. PETN was aged both as a free-flowing powder as well as in modified EBW RP-2 detonators, for one month at 75 °C. The PETN powder has been analyzed chemically using Fisher specific surface area analysis, SEM imaging and light scattering particle size analysis. Additionally the detonators were tested for performance through voltage-sweep threshold testing and function time measurements. Findings from the study indicate that aging at 75 °C for one month significantly changes the specific surface area and particle size of unstabilized PETN, leading to increases in detonator function time, but not detonator threshold values. Powders stabilized with TriPEON displayed less significant increases in function time, while powder stabilized with polysaccharide exhibited no aging effects, despite the high temperature aging.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

Compression–tension cell with sample manipulator for in situ X‐ray nanotomography experiments

In situ X-ray nanotomography experiments where tensile or compressive force is applied on the sample require specialized equipment. A compression-tension device with fluid flow-through capability has been designed for X-ray nanotomography beamlines. The compression-tension cell is equipped with a triaxial stage for sample alignment and a high sensitivity loadcell for measurement of applied force. To handle the <100 µm samples used for X-ray nanotomography imaging and for loading samples on the compression-tension cell a sample manipulator has been built. The sample manipulator is capable of selecting a single <100 µm particle for nanotomography scanning while viewing multiple samples under an optical microscope. To test the functionality of these two devices an initial compression experiment involving two glass beads was performed. To demonstrate instrument stability two spherical glass beads were compressed from a no load condition until one of the beads fractured. Nanotomography data were collected at each step of increasing compressive force. The experimentally observed contact area of the spherical glass beads was compared with the theoretical estimate using the Hertz analysis. To demonstrate the fluid flow capability, two calcite grains were compressed against each other under a calcite saturated solution. Surface topological changes were observed for the stressed grain contact area.

X-ray tomography↗
DOE OSTI2025

Elucidating grain boundary energy minimization mechanisms in textured Ca-doped alumina with inclination-dependent Monte Carlo Potts simulations

The grain growth behavior of textured Ca-doped alumina is compared to Monte Carlo Potts (MCP) simulations to investigate the effect of anisotropic grain boundary (GB) properties on local boundary migration. Experimentally, the growth of textured Ca-doped alumina results in highly elongated grains. The relative GB energy distribution is measured using the thermal groove method before and after heat treating at 1600°C, finding that high energy GBs are eliminated during grain growth. No significant difference in the GB energy distributions is found between the long and short axes of the elongated grains, suggesting that anisotropic mobility may be responsible for the grain shape. However, MCP simulations with anisotropic mobility as a function of plane inclination do not result in grains with distinct morphologies, regardless of the degree of anisotropy introduced. The final grain shape after grain growth of textured Ca-doped alumina resembles that of the MCP simulations using an anisotropic GB energy as a cosine function of plane inclination. Several energy functions are tested and only those that mathematically impose a torque (second derivative of energy with respect to the plane inclination angle) result in elongated grains. Although area reduction is the dominant energy minimization mechanism, these results suggest that local GB migration is affected by anisotropic GB energy and torque and alternative mechanisms like GB replacement and reorientation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Gradient-enhanced physics-informed neural networks for forward and inverse PDE problems

Deep learning has been shown to be an effective tool in solving partial differential equations (PDEs) through physics-informed neural networks (PINNs). PINNs embed the PDE residual into the loss function of the neural network, and have been successfully employed to solve diverse forward and inverse PDE problems. However, one disadvantage of the first generation of PINNs is that they usually have limited accuracy even with many training points. Here, we propose a new method, gradient-enhanced physics-informed neural networks (gPINNs), for improving the accuracy of PINNs. gPINNs leverage gradient information of the PDE residual and embed the gradient into the loss function. We tested gPINNs extensively and demonstrated the effectiveness of gPINNs in both forward and inverse PDE problems. Our numerical results show that gPINN performs better than PINN with fewer training points. Additionally, we combined gPINN with the method of residual-based adaptive refinement (RAR), a method for improving the distribution of training points adaptively during training, to further improve the performance of gPINN, especially in PDEs with solutions that have steep gradients.

42 ENGINEERING↗
DOE OSTI2022

Combining DPG in space with DPG time-marching scheme for the transient advection–reaction equation

In this article, we present a general methodology to combine the Discontinuous Petrov–Galerkin (DPG) method in space and time in the context of methods of lines for transient advection–reaction problems. We first introduce a semidiscretization in space with a DPG method redefining the ideas of optimal testing and practicality of the method in this context. Then, we apply the recently developed DPG-based time-marching scheme, which is of exponential-type, to the resulting system of Ordinary Differential Equations (ODEs). Further, we also discuss how to efficiently compute the action of the exponential of the matrix coming from the space semidiscretization without assembling the full matrix. Finally, we verify the proposed method for 1D+time advection–reaction problems showing optimal convergence rates for smooth solutions and more stable results for linear conservation laws comparing to the classical exponential integrators.

42 ENGINEERING↗
DOE OSTI2020

Comprehensive proteomics analysis of stressed human islets identifies GDF15 as a target for type 1 diabetes intervention

Type 1 diabetes results from the progressive loss of beta cells, a process propagated by pro-inflammatory cytokine signaling that disrupts the balance between the expression of pro- and anti-apoptotic proteins. To identify such proteins, we performed comprehensive proteomics of human pancreatic islets treated with interleukin-1ß and interferon-?, leading to the identification of 11,325 proteins, of which 387 were significantly regulated by treatment. We then tested the function of growth/differentiation factor 15 (GDF15), which was repressed by the cytokine treatment. We found that GDF15 translation was blocked during inflammation, while the addition of exogenous GDF15 inhibited interleukin-1ß/interferon-?-induced apoptosis of human islets and a human beta-cell line. Furthermore, administration of GDF15 significantly decreased insulitis in NOD mice. Our approach provides a unique resource for the identification of the human islet proteins regulated by cytokines and was effective in discovering a potential target for type 1 diabetes therapy.

Nakayasu, Ernesto S.↗
DOE OSTI2023

A deep neural network regressor for phase constitution estimation in the high entropy alloy system Al-Co-Cr-Fe-Mn-Nb-Ni

High Entropy Alloys (HEAs) are composed of more than one principal element and constitute a major paradigm in metals research. The HEA space is vast and an exhaustive exploration is improbable. Therefore, a thorough estimation of the phases present in the HEA is of paramount importance for alloy design. Machine Learning presents a feasible and non-expensive method for predicting possible new HEAs on-the-fly. A deep neural network (DNN) model for the elemental system of: Mn, Ni, Fe, Al, Cr, Nb, and Co is developed using a dataset generated by high-throughput computational thermodynamic calculations using Thermo-Calc. The features list used for the neural network is developed based on literature and freely available databases. A feature significance analysis matches the reported HEAs phase constitution trends on elemental properties and further expands it by providing so far-overlooked features. The final regressor has a coefficient of determination ( r 2 ) greater than 0.96 for identifying the most recurrent phases and the functionality is tested by running optimization tasks that simulate those required in alloy design. The DNN developed constitutes an example of an emulator that can be used in fast, real-time materials discovery/design tasks.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The electronic structure of diatomic nickel oxide

High level calculations at the MRCI+Q and CCSD(T) levels were used to predict the spectroscopic properties and bond dissociation energy of NiO. A range of DFT functionals were tested and most did not provide good agreement.

Chemistry↗
DOE OSTI2022

Exploring the deformation behavior of nanotwinned Al–Zr alloy via in situ compression

Nanotwinned metals have demonstrated the capacity for concomitant high strength and ductility. However, metals with high stacking fault energies, such as aluminum (Al), have a low propensity for twin formation. Here, we show the fabrication of supersaturated solid-solution Al–Zr alloys with a high density of growth twins. Incoherent twin boundaries (ITBs) are strong barriers to dislocation motion, while mobile partial dislocations promote plasticity. These deformable nanotwinned Al–Zr alloys reach a flow stress of ∼1 GPa, as demonstrated using in situ micropillar compression tests. Density functional theory calculations uncover the role Zr solute plays in the formation and deformation of the nanotwinned microstructure. This study features a strategy for incorporating ITBs and 9R phase into Al alloys for simultaneous benefits to strength and deformability.

Richter, N. A. (ORCID:0000000332732276)↗
DOE OSTI2024

Accuracy of kinetic equilibrium reconstruction of NSTX and NSTX-U plasmas and its impact on the transport and stability analysis

An accurate magnetohydrodynamic (MHD) equilibrium reconstruction is an essential starting point for stability and transport plasma analysis. Herein this work describes an approach for obtaining kinetic equilibrium reconstructions using the OMFIT framework, which has been applied for the first time to spherical tokamak data from NSTX and NSTX-U. The EFIT equilibrium solver is integrated with experimental data analysis procedures and subsequent TRANSP transport simulations to enhance the accuracy of the reconstruction, in particular, at the edge region, by adding constraints on the total pressure and current density profiles, based on the transport code solution. The accuracy of the equilibrium reconstruction depends on the uncertainty and number of constraints, as well as the choice of basis functions to represent the pressure and current density profiles. Improved fidelity of the equilibrium reconstruction is demonstrated by reducing the variability of the magnetic axis and boundary locations from several centimeters, for reconstructions based on magnetic and experimental pressure constraints, to only several millimeters, for kinetic reconstructions based on transport code constraints, when different representations of basis functions were tested. The variability of the safety factor on axis was reduced ten times in the same sensitivity study. The accuracy of the equilibrium reconstruction and subsequent mapping of the experimental kinetic profile data have a significant impact on the trapped gyro Landau fluid and linear CGYRO turbulence simulations, which predict different spectra of unstable modes and turbulent fluxes for cases with different numbers of constraints in the equilibrium reconstruction. Conversely, the stability analysis performed using the GATO code shows plasmas that are stable to n = 1 MHD modes in both equilibria using magnetic and experimental pressure constraints as well as the transport code constrained equilibrium. However, a scan of parameters away from these conditions shows considerable deviation in the threshold of unstable modes between these reconstructions. Therefore, for reliable plasma analysis and use in turbulence and stability calculations, a high-fidelity equilibrium reconstruction with accurate kinetic constraints based on transport code solutions is necessary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Compartmental Control of UDP-Araf Supply: Golgi Lumen UDP-Arabinopyranose Mutase Depletes Plant Cell Wall Araf Linkages

L-Arabinofuranose (Araf) is a major constituent of plant cell wall polysaccharides. UDP-Araf is generated from UDP-L-arabinopyranose (UDP-Arap) by a UDP-Arap mutase (UAM) on the cytosolic face of the Golgi and then imported into the Golgi lumen for utilization by arabinosyltransferases (AraTs). Yet, a substantial fraction of UDP-Arap is synthesized in the Golgi lumen by the UDP-xylose 4-epimerase (UXE), creating a topological paradox where luminal UDP-Arap must be exported to the cytosol for conversion to UDP-Araf by UAM and then re-imported into the Golgi lumen. To test the functional significance of this compartmentation, we mislocalized Arabidopsis (Arabidopsis thaliana) UAM1 to the Golgi lumen by fusing it to the UXE1 transmembrane domain. The fusion protein was present in the Golgi, and protease-protection assays on microsomes supported its luminal orientation. In wild-type and uam1 plants, Golgi-targeted UAM1 reduced total cell wall Arabinose without consistent changes in other monosaccharides. Linkage analyses showed that this decrease reflects selective loss of Araf residues, whereas Arap remain largely unchanged, consistent with reduced UDP-Araf availability for luminal AraTs. Under salt stress, expression of Golgi-targeted UAM1 in uam1 caused root-growth inhibition and maturation-zone swelling that exogenous L-Ara failed to rescue. These results support a hypothesis that the strong thermodynamic bias of the UAM reaction toward UDP-Arap requires spatial separation of UDP-Arap production from UDP-Araf formation to sustain UDP-Araf flux into Golgi arabinosylation and avoid futile intraluminal back-conversion.

59 BASIC BIOLOGICAL SCIENCES↗