Search NASA⌕ Search

SEARCH · Search NASA

Results for “texture characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Investigating Hydrothermally Altered Basalts in Long Valley, California: Potential Analog for Altered Basalts on Mars

The Long Valley Caldera in California is a well-studied geological site, but its potential as a Mars analog is relatively unexplored. The caldera shows evidence of hydrothermal activity and alteration of basalt units, but prior research has not focused on this. Understanding alteration trends and geochemical signatures in basalt could prove useful in our understanding of Martian geology. Research on Mars has shown alteration trends, but the exact mechanisms behind these, such as the influence of water, heat, and other environmental factors, remain enigmatic. We identified a single basalt flow in Long Valley Caldera, California, that uniquely houses both fumarolic and hydrothermal alteration regimes. By sampling throughout the basalt unit (Fig. 1), we aim to characterize the connections between types, degrees, and durations alteration mechanisms, along with the resultant mineral phases and textures, to better understand rover and orbital data of Mars basalts.

Mars↗
NASA NTRSDate not supplied

Quantitative 3D Textural and Petrofabric Analysis of the Northwest Africa 10645 Nakhlite Using X-Ray Computed Tomography

Martian meteorites are currently the only samples available from Mars to study and are critical for elucidating variability in martian igneous processes over time [e.g., 1]. Quantifying igneous textures and fabrics can help us understand how rocks are formed and emplaced [e.g., 2]. These features are innately three dimensional (3D) and are often strongly heterogeneous in cumulate rocks, like the nakhlites and poikilitic shergottites [2–3], where there can be substantial textural variations between and within individual samples. However, most quantitative textural and fabric analyses on these samples have been limited to two dimensions through measurements made on polished petrographic thin sections. Thus, 3D petrographic measurements are imperative for both representative sample characterization and accurately interpreting magmatic processes. The emplacement of martian meteorites at or near the surface of Mars (i.e., extrusive or intrusive, respectively) remains enigmatic due to the innate lack of geologic context [e.g., 1], but conducting 3D quantitative textural and fabric analyses can help elucidate emplacement mechanisms and settings on Mars.

S. Ramsey↗
NASA NTRS1982

A study of image quality for radar image processing

Methods developed for image quality metrics are reviewed with focus on basic interpretation or recognition elements including: tone or color; shape; pattern; size; shadow; texture; site; association or context; and resolution. Seven metrics are believed to show promise as a way of characterizing the quality of an image: (1) the dynamic range of intensities in the displayed image; (2) the system signal-to-noise ratio; (3) the system spatial bandwidth or bandpass; (4) the system resolution or acutance; (5) the normalized-mean-square-error as a measure of geometric fidelity; (6) the perceptual mean square error; and (7) the radar threshold quality factor. Selective levels of degradation are being applied to simulated synthetic radar images to test the validity of these metrics.

King, R. W.↗
NASA NTRS2015

Characterization of Apollo Regolith by X-Ray and Electron Microbeam Techniques: An Analog for Future Sample Return Missions

The Apollo missions collected 382 kg of rock and regolith from the Moon; approximately 1/3 of the sample mass collected was regolith. Lunar regolith consists of well mixed rocks, minerals, and glasses less than 1-centimeter n size. The majority of most surface regolith samples were sieved into less than 1, 1-2, 2-4, and 4-10- millimiter size fractions; a portion of most samples was re-served unsieved. The initial characterization and classification of most Apollo regolith particles was done primarily by binocular microscopy. Optical classification of regolith is difficult because (1) the finest fraction of the regolith coats and obscures the textures of the larger particles, and (b) not all lithologies or minerals are uniquely identifiable optically. In recent years, we have begun to use more modern x-ray beam techniques [1-3], coupled with high resolution 3D optical imaging techniques [4] to characterize Apollo and meteorite samples as part of the curation process. These techniques, particularly in concert with SEM imaging of less than 1-millimeter regolith grain mounts, allow for the rapid characterization of the components within a regolith.

Zeigler, Ryan A.↗
NASA NTRS1988

Arc-textured metal surfaces for high thermal emittance space radiators

Carbon arc electrical discharges struck across the surfaces of metals such as Nb-1 percent Zr, alter the morphology to produce a high thermal emittance surface. Metal from the surface and carbon from the arc electrode vaporize during arcing, and then condense on the metal surface to produce a microscopically rough surface having a high thermal emittance. Quantitative spectral reflectance measurements from 0.33 to 15 microns were made on metal surfaces which were carbon arc treated in an inert gas environment. The resulting spectral reflectance data were then used to calculate thermal emittance as a function of temperature for various methods of arc treatment. The results of arc treatment on various metals are presented for both ac and dc arcs. Surface characterization data, including thermal emittance as a function of temperature, scanning electron microscopy, and atomic oxygen durability, are also presented. The ac arc texturing was found to increase the thermal emittance at 800 K from 0.05 to 0.70.

Banks, Bruce A.↗
NASA NTRS2009

Geologic Mapping of the Meridiani Region of Mars

The Mars Exploration Rover Opportunity observed an upper layer of a more than 600-m-thick sequence of light toned outcrops that characterize the Meridiani region of Mars. Results from the rover analyses have shown that the bedrock contains mineral and textural characteristics that require at least the interaction of, and possibly an overall formation by, water-related mechanisms in order to be explained [1]. Additionally, remote sensing studies of the region have suggested that the rocks sampled in places by the MER rover consist of many distinct layers extending over an area of more than 3 10(exp 5) sq km spanning 20deg of longitude [2].

DiAchille, G.↗
NASA NTRS2010

Geologic Mapping of the Meridiani Region of Mars

The Mars Exploration Rover Opportunity observed an upper layer of a more than 600-m-thick sequence of light toned outcrops that characterize the Meridiani region of Mars. Results from the rover analyses have shown that the bedrock contains mineral and textural characteristics that require the interaction of, and possibly an overall formation by, water-related mechanisms in order to be explained. Additionally, remote sensing studies of the region have suggested that the rocks sampled in places by the MER rover consist of many distinct layers extending over an area of more than 3 X 10(exp 5) square km spanning 20 of longitude.

Hynek, B. M.↗
NASA NTRS2023

Characterizing Space Weathering Features in Grains From Asteroid Ryugu

Airless bodies such as asteroids are characterized by a lack of a protective atmosphere to guard against the effects of micrometeorite bombardment and solar wind irradiation. These processes, cumulatively known as space weathering, alter the microstructural and chemical properties of grains on asteroidal surfaces, signatures of which are recognized as vesiculated textures, amorphous grain rims, and fe-bearing nanoparticles. The accumulation of these features also causes changes in the optical properties of the surface regolith, complicating the interpretation of remote sensing data and the characterization of returned samples.

L. E. Melendez↗
NASA NTRS1987

The microstructure and tensile properties of extruded melt-spun ribbons of iron-rich B2 FeAl

The microstructure of extruded rods of iron-rich FeAl(B2-structure), as characterized by TEM, SEM, optical microscopy and x-ray diffractometry, consisted of elongated grains with a 111-line fibre texture containing a high dislocation density. Numerous oxide particles were found, mostly in lines which reflected the matrix flow during extrusion. In addition, some large inclusions were present. Tensile testing of annealed, relatively dislocation-free specimens as a function of increasing temperature found increasing ductility up to 900K, above which a ductility drop occurred accompanied by a change in fracture mode, from transgranular cleavage to intergranular fracture. The yield strength, which was independent of temperature up to 800K (at about 500MPa), also decreased rapidly as diffusion became more important. The predominant slip vector changed from 111-line to 100-line around 700K.

Baker, I.↗
NASA NTRS2015

Peology and Geochemistry of New Paired Martian Meteorites 12095 and LAR 12240

The meteorites LAR 12095 and LAR 12240 are believed to be paired Martian meteorites and were discovered during the Antarctic Search for Meteorites (ANSMET) 2012-2013 Season at Larkman Nunatak. The purpose of this study is to characterize these olivine-phyric shergottites by analyzing all mineral phases for major, minor and trace elements and examining their textural relationships. The goal is to constrain their crystallization history and place these shergottites among other Martian meteorites in order to better understand Martian geological history.

Funk, R. C.↗
NASA NTRS1997

Analysis of Texture Using the Fractal Model

Properties such as the fractal dimension (FD) can be used for feature extraction and classification of regions within an image. The FD measures the degree of roughness of a surface, so this number is used to characterize a particular region, in order to differentiate it from another. There are two basic approaches discussed in the literature to measure FD: the blanket method, and the box counting method. Both attempt to measure FD by estimating the change in surface area with respect to the change in resolution. We tested both methods but box counting resulted computationally faster and gave better results. Differential Box Counting (DBC) was used to segment a collage containing three textures. The FD is independent of directionality and brightness so five features were used derived from the original image to account for directionality and gray level biases. FD can not be measured on a point, so we use a window that slides across the image giving values of FD to the pixel on the center of the window. Windowing blurs the boundaries of adjacent classes, so an edge-preserving, feature-smoothing algorithm is used to improve classification within segments and to make the boundaries sharper. Segmentation using DBC was 90.8910 accurate.

Navas, William↗
NASA NTRS1974

Identification and interpretation of tectonic features from ERTS-A imagery

The author has identified the following significant results. A set of criteria characterizing known mineralized areas are: (1) occurrence at structural bends, discontinuities, complex deformations along fault zones and intersections; (2) complex terrain textures produced by fracture intersections; (3) color and tone anomalies produced by igneous intrusives, alteration effects, and oxidation. Significant fracture systems which appear to be most commonly related to mineralization in central and northeastern Nevada trend northeast-southwest, north-south, and north-northwest. In the area from Goldfield and Beatty, Nevada, to south of Las Vegas, ERTS-1 and Skylab imagery have been examined together to study an apparent correlation of mineralized areas with suspected hydrothermal alteration effects. It was observed that areas of mineralization are of complex structure, usually cut by many fractures, and sometimes have a similar mottled or variegated appearance. Although the Beatty-Rhyolite mining district is now largely inactive, several analogous areas not known to be mineralized have been identified. Identification of specific mineral prospects within general targets requires extensive field work and detailed geophysical exploration.

Abdel-Gawad, M.↗
NASA NTRS1984

Aggregating available soil water holding capacity data for crop yield models

The total amount of water available to plants that is held against gravity in a soil is usually estimated as the amount present at -0.03 MPa average water potential minus the amount present at -1.5 MPa water potential. This value, designated available water-holding capacity (AWHC), is a very important soil characteristic that is strongly and positively correlated to the inherent productivity of soils. In various applications, including assessing soil moisture status over large areas, it is necessary to group soil types or series as to their productivity. Current methods to classify AWHC of soils consider only total capacity of soil profiles and thus may group together soils which differ greatly in AWHC as a function of depth in the profile. A general approach for evaluating quantitatively the multidimensional nature of AWHC in soils is described. Data for 902 soil profiles, representing 184 soil series, in Indiana were obtained from the Soil Characterization Laboratory at Purdue University. The AWHC for each of ten 150-mm layers in each soil was established, based on soil texture and parent material. A multivariate clustering procedure was used to classify each soil profile into one of 4, 8, or 12 classes based upon ten-dimensional AWHC values. The optimum number of classes depends on the range of AWHC in the population of oil profiles analyzed and on the sensitivity of a crop to differences in distribution of water within the soil profile.

Seubert, C. E.↗
NASA NTRS1999

Pressure Effect in ZnO Films Using Off-Axis Sputtering Deposition

ZnO films are deposited on (0001) sapphire, (001) Si and quartz substrates using the off-axis reactive magnetron sputtering deposition. Based on film thickness measurements, three transport regions of sputtered particles are observed when films are deposited in the pressure regions of 5 mtorr - 150 mtorr. X-ray diffraction, scanning probes microscopy, and electrical measurements are also used to characterize these films. The full width at half maximum of theta rocking curves for epitaxial films is less than 0.5 deg. In textured films, it rises to several degrees. The epitaxial films deposited at high pressure reveal a flat surface with some hexagonal facets. The density of hexagonal facets decreases when the growth pressure is reduced. The resistivity of these epitaxial films also depends on the growth pressures. A relationship between the pressure effects and film properties are discussed.

Zhu, Shen↗
NASA NTRS2004

Lunar and Planetary Science XXXV: Carbonaceous Chondrites

The titles in this section include: 1) A Quantitative NMR Analysis of Phosphorus in Carbonaceous and Ordinary Chondrites; 2) An Infrared Study of the Matrices of CI1 and CM2 Chondrites; 3) A Study of the Morphology, Composition and Mineral Associations of Fe-Ni Sulphides in CM Carbonaceous Chondrites; 4) Aqueous Alteration Mineralogy in CM Carbonaceous Chondrites; 5) In Situ Location and Characterization of Carbon-bearing Phases in Carbonaceous; 6) Chondrites: Insights from Yamato 791198, a Weakly-altered CM2 Chondrite; 7) Unique Texture in EET 83389: Clues to Formation of Fine Grained Rims in CM Chondrites; 8) Amoeboid Olivine Aggregates in the NWA 760 CV3 Chondrite; 9) Petrologic Type of CV3 Chondrites as Revealed by Raman Spectroscopy of Organic Matter; 10) A First Look at Acfer 324: Evidence for Another CR 3 Chondrite? 11) Hydrogen Isotopic Composition of the Bencubbin Meteorite; 12) The Fountain Hills Meteorite: A New CBa Chondrite from Arizona; 13) Shock Effects in the Metal-rich Chondrites QUE 94411, Hammadah al Hamra 237 and Bencubbin; 14) Mineralogy and Petrology of Al-rich Objects in the CH Carbonaceous Chondrite North West Africa 739.

Source record↗
NASA NTRS1984

Geologic interpretation of Seasat SAR imagery near the Rio Lacantum, Mexico

A mosaic of the Seasat Synthetic Aperture Radar (SAR) optically processed images over Central America is presented. A SAR image of the Rio Lacantum area (southeastern Mexico) has been digitally processed and its interpretation is presented. The region is characterized by low relief and a dense vegetation canopy. Surface is believed to be indicative of subsurface structural features. The Seasat-SAR system had a steep imaging geometry (incidence angle 23 + or - 3 deg off-nadir) which is favorable for detection of subtle topographic variations. Subtle textural features in the image corresponding to surface topography were enhanced by image processing techniques. A structural and lithologic interpretation of the processed images is presented. Lineaments oriented NE-SW dominate and intersect broad folds trending NW-SE. Distinctive karst topography characterizes one high relief area

Rebillard, PH.↗
NASA NTRS1977

Coarse-grained basalt 71597 - A product of partial olivine accumulation

Rock 71597, a coarse-grained plagioclase-poikilitic basalt that contains 15.8% MgO and 19.3% modal olivine, is described. Olivine and ilmenite crystals occur in two size generations, and large subequant olivine crystals, small 'matrix' olivines, and large ilmenite crystals are characterized. Since large olivine and ilmenite crystals with skeletal habits suggestive of crystallization under relatively rapid cooling are found in a rock whose texture is consonant with slower cooling, it is suggested that the large skeletal crystals formed toward the more rapidly cooled margin of a flow and accumulated by gravitational crystal settling toward the flow's interior. In support of this hypothesis, calculations indicate that the observed olivine compositions are approximately 10 mol% too Fe-rich to have crystallized from a melt of composition corresponding to that of 71597.

Warner, R. D.↗
NASA NTRS1979

Geology of the lunar farside crater Necho

The ejecta morphology and distribution as well as the interior materials of the 30-km-diameter, Necho lunar crater is discussed and the effects of regional preimpact topography on the formation structure and modification of the crater are described. Three types of ejecta: hummocky, lineated, and smooth, that are concentrated in a band extending from the rim crest to a distance of less than one crater diameter are examined. The crater's interior, divided into floor units of textured, bubbled, and smooth material is analyzed and hypotheses of their origin are presented. The last area of study is the preimpact setting, characterized by a series of large, degraded, pre-Nectarian craters. Results showed that the Necho, in comparison with surrounding craters, was the freshest, insuring that the data from its excavation was preserved without a significant amount of degradation.

Gifford, A. W.↗