Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermal catalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

In Situ Identification of Reaction Intermediates and Mechanistic Understandings of Methane Oxidation over Hematite: A Combined Experimental and Theoretical Study

Effective methane utilization for either clean power generation or value-added chemical production has been a subject of growing attention worldwide for decades, yet challenges persist mostly in relation to methane activation under mild conditions. Here, we report hematite, an earth-abundant material, to be highly effective and thermally stable to catalyze methane combustion at low temperatures (<500 °C) with a low light-off temperature of 230 °C and 100% selectivity to CO 2 . The reported performance is impressive and comparable to those of precious-metal-based catalysts, with a low apparent activation energy of 17.60 kcal·mol –1 . Our theoretical analysis shows that the excellent performance stems from a tetra-iron center with an antiferromagnetically coupled iron dimer on the hematite (110) surface, analogous to that of the methanotroph enzyme methane monooxygenase that activates methane at ambient conditions in nature. Isotopic oxygen tracer experiments support a Mars van Krevelen redox mechanism where CH 4 is activated by reaction with a hematite surface oxygen first, followed by a catalytic cycle through a molecular-dioxygen-assisted pathway. Surface studies with in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and density functional theory (DFT) calculations reveal the evolution of reaction intermediates from a methoxy CH 3 –O–Fe, to a bridging bidentate formate b-HCOO–Fe, to a monodentate formate m-HCOO–Fe, before CO 2 is eventually formed via a combination of thermal hydrogen-atom transfer (HAT) and proton-coupled electron transfer (PCET) processes. Finally, the elucidation of the reaction mechanism and the intermediate evolutionary profile may allow future development of catalytic syntheses of oxygenated products from CH 4 in gas-phase heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Fabrication of Large-Area Metal-on-Carbon Catalytic Condensers for Programmable Catalysis

Catalytic condensers stabilize charge on either side of a high-k dielectric film to modulate the electronic states of a catalytic layer for the electronic control of surface reactions. Here, carbon sputtering provided for fast, large-scale fabrication of metal–carbon catalytic condensers required for industrial application. Carbon films were sputtered on HfO 2 dielectric/p-type Si with different thicknesses (1, 3, 6, and 10 nm), and the enhancement of conductance and capacitance of carbon films was observed upon increasing the carbon thickness following thermal treatment at 400 °C. After Pt deposition on the carbon films, the Pt catalytic condenser exhibited a high capacitance of ∼210 nF/cm 2 that was maintained at a frequency ∼1000 Hz, satisfying the requirement for a dynamic catalyst to implement catalytic resonance. Temperature-programmed desorption of carbon monoxide yielded CO desorption peaks that shifted in temperature with the varying potential applied to the condenser (−6 or +6 V), indicating a shift in the binding energy of carbon monoxide on the Pt condenser surface. A substantial increase in capacitance (∼2000 nF/cm 2 ) of the Pt-on-carbon devices was observed at elevated temperatures of 400 °C that can modulate ∼10% of charge per metal atom when 10 V potential was applied. A large catalytic condenser of 42 cm 2 area Pt/C/HfO 2 /Si exhibited a high capacitance of 9393 nF with a low leakage current/capacitive current ratio (<0.1), demonstrating the practicality and versatility of the facile, large-scale fabrication method for metal–carbon catalytic condensers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Sustainable Valorization of CO2 through Nuclear Power-to-X Pathways

Some of the issues concerning energy security and climate change can be addressed by employing nuclear power (NP) to supply the energy required for the conversion of carbon dioxide (CO2) into chemicals, products, and materials. Nuclear energy represents a neutral carbon source that can be generated sustainably, reliably, and consistently. Nuclear power plants (NPPs) could supply energy in the form of heat, electricity, and ionizing radiation to drive CO2 chemical reactions underpinning NP-to-X type of pathways. CO2 conversion processes are either commercially available or emerging technologies at different developmental maturity stages. This work reviews the published literature (articles and patents) that reports R&D results and the understanding and development of chemical reactions and processes, as well as the efforts in integrating NPPs and chemical processes (CPs). As will be made evident, a new industrial era for the manufacturing of decarbonized chemicals, products, and materials will be possible by developing and implementing new (more energy- and carbon-efficient) processes responding to the NP-to-X pathways. This new decarbonizing platform not only contributes to achieving net zero goals but also broadens the NPP product beyond electricity.

08 HYDROGEN↗
DOE OSTI2023

Sustainable ammonia synthesis from nitrogen wet with sea water by single-step plasma catalysis

Ammonia synthesis at ambient conditions employing intermittent distributed green sources of energy and feedstocks is globally sought to replace the centralized Haber-Bosch (H-B) process operating at high temperature and pressure. We report herein for the first time an effective and sustainable ammonia synthesis pathway from N 2 wet with seawater vapor over spherical SiO 2 and M/SiO 2 (M: Ag, Cu, and Co) catalysts driven by non-thermal plasma (NTP). Experimental results indicate that the presence of a catalyst is required for ammonia production from seawater vapor and N 2 . The Co/SiO 2 catalyst delivered the highest ammonia synthesis rate (r NH 3 ) of 3.7 mmol g cat -1 h -1 and energy yield of 3.2 g NH 3 ∙kW -1 ∙h -1 at a relatively low input power of 2 W. The extraction of H atoms from H 2 O molecules plays an important role in the ammonia synthesis from seawater vapor. Finally, this work unfolds a novel platform for the subsequent optimization of sustainable ammonia production from endless resources such as seawater and N 2 through catalytic non-thermal plasma potentially powered by renewable sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

In Situ Analysis of Manganese Antimonate Oxygen Evolution Electrocatalysts via Ambient Pressure X-ray Photoelectron Spectroscopy

Here, manganese antimonates are earth-abundant potential alternatives to precious metal catalysts for the oxygen-evolution reaction (OER). Herein, X-ray photoelectron spectroscopy was used to determine the surface chemistry of a manganese antimonate catalyst for the OER under ultra-high vacuum, ambient pressure, and in situ reaction conditions. Ex situ and in situ analysis revealed the oxidation states of surficial species as a function of material stoichiometry, water content, and applied potential. In situ XPS measurements in 1.0 M KOH(aq) indicated that relative to the rest state, the surface Mn(III) partially oxidized while effecting the OER, with approximately 15% of the Mn signal attributable to Mn(IV) and the remainder attributable to Mn(III).

36 MATERIALS SCIENCE↗
DOE OSTI2020

Plasma-Catalytic Ammonia Synthesis beyond the Equilibrium Limit

In this work, we explore the consequences of nonthermal plasma-activation on product yields in catalytic ammonia synthesis, a reaction that is equilibrium-limited at elevated temperatures. We employ a minimal microkinetic model that incorporates the influence of plasma-activation on N 2 dissociation rates to predict NH 3 yields into and across the equilibrium-limited regime. NH 3 yields are predicted to exceed bulk thermodynamic equilibrium limits on materials that are thermal-rate-limited by N 2 dissociation. In all cases, yields revert to bulk equilibrium at temperatures at which thermal reaction rates exceed plasma-activated ones. Beyond-equilibrium NH 3 yields are observed in a packed bed dielectric barrier discharge reactor and exhibit sensitivity to catalytic material choice in a way consistent with model predictions. The approach and results highlight the opportunity to exploit synergies between nonthermal plasmas and catalysts to affect transformations at conditions inaccessible through thermal routes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Disordered TiO x –SiO x Nanocatalysts Using Bioinspired Synthetic Routes

Metal oxide nanomaterials have increasing significance and broad applications in catalysis, ranging from support materials to active catalysts. Here, we have demonstrated a facile synthetic strategy to create disordered, high-surface-area metal oxide nanomaterials using biomineralization-inspired methods. Using protamine as a protein template, a range of TiO x –SiO x nanomaterials were synthesized and implemented for catalytic CO 2 thermal reduction reactions. The modularity of synthetic options afforded via biomineralization enables increases in surface area, which are ideally suited for subsequent modification to regulate catalytic performance. All materials were thoroughly characterized using a suite of synchrotron scattering and spectroscopic methods. Through these techniques, we have demonstrated that protamine-induced biomineralization results in largely disordered materials with changes in the local atomic structure dependent on the applied synthetic conditions. Protamine removal with treatment under acidic conditions greatly increased material surface area while causing measurable changes in the structure as revealed by X-ray absorption spectroscopy. Upon subsequent hydrogenation, Ti- and Si-based defects were induced in the materials while the disordered nature of the material was still largely retained. Furthermore, we found that the incorporation of Si into TiO x was able to mitigate the known anatase to rutile phase change during the reaction while stabilizing the defect sites. The synthetic strategies described in this work are expected to be translatable to other metal oxide nanomaterial chemical structures, providing a means to control catalytic properties using benign synthetic strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Covalent Functionalization of Silicon with Plasma-Grown “Fuzzy” Graphene: Robust Aqueous Photoelectrodes for CO 2 Reduction by Molecular Catalysts

Carbon electrodes are ideal for electrochemistry with molecular catalysts, exhibiting facile charge transfer and good stability. Yet for solar-driven catalysis with semiconductor light absorbers, stable semiconductor/carbon interfaces can be difficult to achieve, and carbon’s high optical extinction means it can only be used in ultrathin layers. Here, we demonstrate a plasma-enhanced chemical vapor deposition process that achieves well-controlled deposition of out-of-plane “fuzzy” graphene (FG) on thermally oxidized Si substrates. The resulting Si|FG interfaces possess a silicon oxycarbide (SiOC) interfacial layer, implying covalent bonding between Si and the FG film that is consistent with the mechanical robustness observed from the films. The FG layer is uniform and tunable in thickness and optical transparency by deposition time. Using p-type Si|FG substrates, noncovalent immobilization of cobalt phthalocyanine (CoPc) molecular catalysts was employed for the photoelectrochemical reduction of CO 2 in aqueous solution. The Si|FG|CoPc photocathodes exhibited good catalytic activity, yielding a current density of ∼1 mA/cm 2 , Faradaic efficiency for CO of ∼70% (balance H 2 ), and stable photocurrent for at least 30 h at −1.5 V vs Ag/AgCl under 1-sun illumination. Furthermore, the results suggest that plasma-deposited FG is a robust carbon electrode for molecular catalysts and suitable for further development of aqueous-stable Si photocathodes for CO 2 reduction.

CO2 reduction↗
DOE OSTI2026

Catalytic resonance theory for the kinetics of photon-promoted catalysis

The illumination of catalytic surfaces with a continuous or pulsed stream of photons dynamically modulates surface chemistry for faster rates, non-equilibrium conversion, or product selectivity control. To establish fundamental principles of dynamic photon-modulated catalysis, the photocatalytic conversion of a generic surface reaction was simulated using the kinetic Monte Carlo method to understand the kinetic implications of an independent stream of photons that promotes surface product desorption. The time-averaged photocatalytic rate at differential conditions for varying photon flux and temperatures indicated three kinetic regimes described by product thermal desorption control, surface reaction control, and an intermediate kinetic regime with a zero slope Arrhenius plot, consistent with a degree of rate control dominated by the photon arrival frequency (i.e., per-site photon flux). Here, the maximum photocatalytic rate occurred orders of magnitude above the Sabatier limit at the resonance frequency, identified as the photon arrival frequency matching the surface reaction rate constant.

Canavan, Jesse R. [University of Minnesota, Minnea↗
DOE OSTI2021

Creating self-assembled arrays of mono-oxo (MoO 3 ) 1 species on TiO 2 (101) via deposition and decomposition of (MoO 3 ) n oligomers

Significance The design and synthesis of hierarchically ordered oxides remains a critical challenge in material science and catalysis. Here, we demonstrate that well-ordered homotopic arrays of mono-oxo (MoO 3 ) 1 can be easily prepared on anatase TiO 2 (101) via the deposition of (MoO 3 ) n oligomers. As revealed by our combined experiential and theoretical studies, the oligomers spontaneously decompose and self-assemble into chemically identical and thermally stable monomers. The oligomer decomposition is permitted at room temperature due to the dynamic coupling of decomposition steps to the lattice phonons of TiO 2 . We identify transient mobility of the oligomers as key to the self-assembly of the complete overlayer. The ease of preparation and thermal stability of this atomically precise system makes it highly suitable for a broad range of applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Molecular Recognition with Resolution Below 0.2 Angstroms Through Thermoregulatory Oscillations in Covalent Organic Frameworks

Crystalline materials with uniform molecular-sized pores are desirable for a broad range of applications, such as sensors, catalysis, and separations. However, it is challenging to tune the pore size of a single material continuously and to reversibly distinguish small molecules (below 4 angstroms). We synthesized a series of ionic covalent organic frameworks using a tetraphenoxyborate linkage that maintains meticulous synergy between structural rigidity and local flexibility to achieve continuous and reversible (100 thermal cycles) tunability of “dynamic pores” between 2.9 and 4.0 angstroms, with resolution below 0.2 angstroms. This results from temperature-regulated, gradual amplitude change of high-frequency linker oscillations. These thermoelastic apertures selectively block larger molecules over marginally smaller ones, demonstrating size-based molecular recognition and the potential for separating challenging gas mixtures such as oxygen/nitrogen and nitrogen/methane.

crystalline materials↗
DOE OSTI2021

Economizing on Precious Metals in Three-Way Catalysts: Thermally Stable and Highly Active Single-Atom Rhodium on Cera for NO Abatement under Dry and Industrially Relevant Conditions

We show for the first time that atomically dispersed Rh cations on ceria, prepared via high-temperature atom trapping synthesis, are the active species for (CO+NO) reaction. This provides a direct link with the organometallic homogeneous Rh(I) complexes capable of catalyzing dry (CO+NO) reaction but without the stability concern. In particular, thermally stable Rh cations in 0.1wt% Rh1/CeO2 achieve full NO conversion with a TOF of ~ 330 hr-1 per Rh atom at 120 °C. Under dry conditions, the main product above 100 °C is N2 with N2O being the minor product. The presence of water promotes low-temperature activity of 0.1wt% Rh1/CeO2 starting at 50 °C with full NO conversion at ~120 °C. In the case with the wet stream, however, ammonia and nitrogen are the main products with only minor N2O amounts. NH3 formation at such low temperatures is attractive because of the potential to use this as a passive SCR system. Because of the uniformity of Rh ions on the support, we are able to observe the intermediates of (CO+NO) reaction via infrared measurements on Rh cations on zeolite and ceria. Furthermore, we show that ammonia formation correlates with the WGS activity of the material and thus, rhodium hydride Rh-H species are involved in this reaction: we detect Rh(CO)Hx species on ceria using isotopic IR measurements. These findings provide new mechanistic understanding for the catalytically active species in TWC catalysis and open up a new avenue for the synthesis of novel emissions control catalysts with 100% atom economy of ultra-expensive precious metals such as Rh.

Khivantsev, Konstantin↗
DOE OSTI2022

The Dependence of Olefin Hydrogenation and Isomerization Rates on Zirconium Metal–Organic Framework Structure

Zirconium metal–organic frameworks (Zr-MOFs) are a structurally diverse and well-defined class of materials studied in heterogeneous catalysis. Previously, we showed that partial dehydration of the Zr 6 O 8 node in NU-1000 results in heterolytic H 2 cleavage over adjacent Lewis acid and base sites, leading to catalytic conversion of 1-butene. In this work, given the ubiquity of the Zr 6 O 8 node as a secondary building unit (SBU) in Zr-MOFs, with many different potential MOF topologies and capping ligands surrounding the cluster, we study the influence of thermal pretreatments and MOF topology (MOF-808, NU-1000, UiO-66, and NU-1000-NDC) on the activity of the Zr 6 O 8 cluster for H 2 activation and 1-butene hydrogenation and isomerization. Diffuse reflectance IR in the presence of H 2 and pyridine shows that both thermal pretreatment and MOF topology affect the Brønsted acidity of protons generated from H 2 activation and their resulting activity for olefin conversion. High isomerization activity of dehydrated NU-1000 is correlated with the formation of μ 3 OH species after H 2 activation. Additionally, catalytic studies show that the geometry of open coordination sites on individual Zr 6 O 8 nodes influences butene hydrogenation. For this reason, MOF-808 gives anomalously low hydrogenation activity, despite its relatively high total number of open coordination sites, as calculated either from its crystal structure or from NH 3 adsorption. Furthermore, these results reiterate the importance of pretreatment in defining MOF catalytic activity and demonstrate that MOF topology, outside of simply affecting node accessibility, influences reactivity at individual nodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Annealing-Driven Phase Control Enables Plasmonic Tunability in Alloy Nanoparticles

A critical aspect of designing and realizing useful solid state materials is controlling phase and structure to tailor physical properties. While common for semiconductor and quantum materials, plasmonic materials have inhabited a narrow phase space typically comprising one or two elements, e.g., face-centered cubic metals. While this simplicity has enabled robust use and understanding of Au and Ag nanoparticles, it has also limited the design and manipulation of solid state properties. Here, we show that by tuning the phase and elemental composition of binary Au−Sn nanoparticles, the steady-state absorbance and ultrafast thermalization properties of plasmonic nanoparticles can be controlled. Solid state characterization suggests this is due to the dealloying of Sn and destabilization of the AuSn phase, leading to higher quality Au 5 Sn intermetallic phases alongside Au. Consequently, this work shows that phase control can profoundly influence the properties of plasmonic nanoparticles, providing important tunability for applications in catalysis, photothermal heating, and sensing.

Gold↗
DOE OSTI2024

Structure sensitivity in adsorbate-induced adatom formation on FCC transition-metal surfaces

Recent surface science discoveries reveal that adsorbates may induce in situ sub-nanometer cluster formation on transition-metal surfaces. To elucidate the structure sensitivity behind this phenomenon, we performed density functional theory calculations to construct an adatom formation energy database for eight fcc metals and 26 adsorbates commonly involved in catalytic reactions. We show that the adatom formation on (100) surfaces is generally easier than that on (111) surfaces. Many adsorbate/metal pairs exist, mostly on Pd, Ni, Rh, Pt, and Ir, for which adsorbates might induce adatom formation under near-ambient conditions on the (100) facet, but not on (111), highlighting the role of more open facets in adatom formation on metals intrinsically harder than Ag, Au, and Cu. Furthermore, our study offers a new perspective towards understanding structure sensitivity in heterogeneous thermal- and electro-catalytic systems such as methane steam reforming, Fischer-Tropsch synthesis, and ammonia decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Surface Chemistry and Reactions for Bimetallic Au Catalysis (Final Report)

Gold-based catalysts offer tremendous opportunities for developing new technologies for selective oxidation reactions that directly use gas-phase oxygen as a benign reagent and produce either no byproducts or water as the only byproduct. These processes are urgently needed and critical for achieving the sustainable production of chemicals. While recent studies demonstrate that the catalytic properties of gold can be significantly enhanced by addition of other metals, the development of these catalysts with sufficient performance for commercialization is hindered by a lack of fundamental understanding of how the catalytic properties of gold can be controlled and tailored. This project addressed this need by synergistically combining experimental and computational studies to establish fundamental composition-structure-activity relationships for gold-based catalysts for several industrially important reactions. Results from surface spectroscopy, atomic imaging and thermal desorption experiments were combined with molecular models and reaction mechanisms from quantum chemical calculations to link observable reaction rates to the structure and composition of surfaces at the molecular level. The results were used to develop improved catalyst formulations and identify optimized reaction conditions for gold-based catalysts. For broader impacts, the developed methodology was extended to other metallic catalysts, such as silver, platinum-molybdenum and nickel-tin, for improved catalytic efficiency and sustainable production of specialty and commodity chemicals.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effect of Anisotropic Confinement on Electronic Structure and Dynamics of Band Edge Excitons in Inorganic Perovskite Nanowires

Inorganic lead halide perovskite nanostructures show promise as the active layers in photovoltaics, light emitting diodes, and other optoelectronic devices. They are robust in the presence of oxygen and water, and the electronic structure and dynamics of these nanostructures can be tuned through quantum confinement. Here we create aligned bundles of CsPbBr3 nanowires with widths resulting in quantum confinement of the electronic wave functions and subject them to ultrafast microscopy. We directly image rapid one-dimensional exciton diffusion along the nanowires, and we measure an exciton trap density of roughly one per nanowire. Using transient absorption microscopy, we observe a polarization-dependent splitting of the band edge exciton line, and from the polarized fluorescence of nanowires in solution, we determine that the exciton transition dipole moments are anisotropic in strength. Furthermore, our observations are consistent with a model in which splitting is driven by shape anisotropy in conjunction with long-range exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗