Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermoelectric effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Quasilinear dispersion in electronic band structure and high Seebeck coefficient in CuFeS 2 -based thermoelectric materials

The earth-abundant natural mineral chalcopyrite CuFeS 2 is a potential n-type thermoelectric material because of its large Seebeck coefficient at high carrier concentrations. For a long time, the large Seebeck coefficient of CuFeS 2 has been attributed to a large electron effective mass, but the reasons for this and the unusual carrier concentration dependent behavior have rarely been discussed. Here, we systematically investigated the special transport behavior of CuFeS 2 and found the classical parabolic band model to be inadequate in explaining it. Our experimental and theoretical studies indicate that there are two flat electronic pockets at the and Z points of the Brillouin zone near the conduction band edge of CuFeS 2 that dominate the charge transport. These electronic pockets result from nonparabolic quasilinearly dispersing bands that give rise to a linear wave vector dependent energy (E ~ k) and a carrier density dependent effective mass (m* ~ m 0 n 1/3 ). Such a strong carrier concentration dependent carrier effective mass results in the high Seebeck coefficient of CuFeS 2 compound under a large carrier density. Here, the work demonstrates that quasilinearly dispersing bands can give strongly enhanced Seebeck coefficient, and could be useful in optimizing the properties of thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Topological Magnets: Functions Based on Berry Phase and Multipoles

Macroscopic responses of magnets are often governed by magnetization and, thus, have been restricted to ferromagnets. However, such responses are strikingly large in the newly developed topological magnets, breaking the conventional scaling with magnetization. Taking the recently discovered antiferromagnetic (AF) Weyl semimetals as a prime example, we highlight the two central ingredients driving the significant macroscopic responses: the Berry curvature enhanced because of nontrivial band topology in momentum space, and the cluster magnetic multipoles in real space. The combination of large Berry curvature and multipoles enables large macroscopic responses such as the anomalous Hall and Nernst effects, the magneto-optical effect, and the novel magnetic spin Hall effect in antiferromagnets with negligible net magnetization, but also allows us to manipulate these effects by electrical means. Furthermore, nodal-point and nodal-line semimetallic states in ferromagnets may provide the strongly enhanced Berry curvature near the Fermi energy, leading to large responses beyond the conventional magnetization scaling. These significant properties and functions of the topological magnets lay the foundation for future technological development such as spintronics and thermoelectric technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Mapping Thermoelectric Transport in a Multicomponent Alloy Space

Abstract Interest in high entropy alloy thermoelectric materials is predicated on achieving ultralow lattice thermal conductivity κ L through large compositional disorder. However, here it is shown that for a given mechanism, such as mass contrast phonon scattering, κ L will be minimized along the binary alloy with highest mass contrast, such that adding an intermediate mass atom to increase atomic disorder can increase thermal conductivity. Only when each component adds an independent scattering mechanism (such as adding strain fluctuation to an existing mass fluctuation) is there a benefit. In addition, both charge carriers and heat‐carrying phonons are known to experience scattering due to alloying effects, leading to a trade‐off in thermoelectric performance. Analytic transport models are applied, based on perturbation and effective medium theories, to predict how alloy scattering will affect the thermal and electronic transport across the full compositional range of several pseudo‐ternary and pseudo‐quaternary alloy systems. To do so, a multicomponent extension is demonstrated to both thermal and electronic binary alloy scattering models based on the virtual crystal approximation. Finally, it is shown that common functional forms used in computational thermodynamics can be applied to this problem to further generalize the scattering behavior that is modeled.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Iron-based binary ferromagnets for transverse thermoelectric conversion

Thermoelectric generation using the anomalous Nernst effect (ANE) has great potential for application in energy harvesting technology because the transverse geometry of the Nernst effect should enable efficient, large-area and flexible coverage of a heat source. For such applications to be viable, substantial improvements will be necessary not only for their performance but also for the associated material costs, safety and stability. In terms of the electronic structure, the anomalous Nernst effect (ANE) originates from the Berry curvature of the conduction electrons near the Fermi energy. To design a large Berry curvature, several approaches have been considered using nodal points and lines in momentum space. Here we perform a high-throughput computational search and find that 25 percent doping of aluminium and gallium in alpha iron, a naturally abundant and low-cost element, dramatically enhances the ANE by a factor of more than ten, reaching about 4 and 6 microvolts per kelvin at room temperature, respectively, close to the highest value reported so far. The comparison between experiment and theory indicates that the Fermi energy tuning to the nodal web—a flat band structure made of interconnected nodal lines—is the key for the strong enhancement in the transverse thermoelectric coefficient, reaching a value of about 5 amperes per kelvin per metre with a logarithmic temperature dependence. We have also succeeded in fabricating thin films that exhibit a large ANE at zero field, which could be suitable for designing low-cost, flexible microelectronic thermoelectric generators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Hierarchical microstructure of Yb-filled skutterudites through ultrasonically atomized spherical powders for enhanced thermoelectric performance

Hierarchical microstructures are widely explored as a strategy to reduce lattice thermal conductivity in thermoelectric materials while preserving favorable electronic transport. Here we demonstrate that ultrasonic atomization of precursor powders provides an intrinsic pathway to generate such architectures in n-type Yb0.3Co4Sb12 skutterudites. Materials were synthesized by both conventional sealed-ampoule and ultrasonic atomization routes, each yielding essentially single-phase skutterudite after densification. However, the atomized spherical powders undergo a distinct reaction-driven microstructural evolution during thermal treatment prior to densification. Electron microscopy reveals that the skutterudite phase within the particles induces swelling, cracking, and fragmentation of the droplets before consolidation. Multimodal structural and microstructural characterizations show that densification of these fragmented powders produces a hierarchical microstructure consisting of submicron grains, micrometer-scale faceted crystallites, and powder-derived domains separated by oxide-decorated boundaries. Comprehensive thermoelectric transport measurements evidence that this multiscale architecture lowers the lattice thermal conductivity while maintaining favorable electronic transport, leading to an average ~10% enhancement in the thermoelectric figure of merit. Complementary 121Sb Mössbauer spectroscopy further indicates lattice softening in the atomized material. These results demonstrate that ultrasonic atomization provides an effective route to engineer hierarchical microstructures in skutterudite thermoelectrics and offers a promising strategy for tailoring thermal transport in energy-conversion materials.

Bouteiller, Hugo [ORNL] (ORCID:0009000421322962)↗
DOE OSTI2025

ORNL Design Engineering Library: Validated Thermoelectric Digital Twins

Radioisotope thermoelectric generators (RTGs) serve a crucial role in supplying thermal and electrical energy for reliable and long-duration power in remote and extreme environments. The thermal energy is provided by the decay of radioisotopes and is converted into electrical energy using the steady-state thermoelectric process by exploiting the Seebeck effect. Maintaining a thermal gradient through the material is necessary to drive current production. Modern predictive multi-physics tools are able to effectively describe the complex and strongly coupled phenomena needed for accurate model-based system engineering efforts needed to develop higher performing RTGs. Experimental validation of model simulations is essential to confirm the accuracy, reliability, and applicability of predictive multiphysics tools. Validation fosters confidence among users, helps meet regulatory requirements, and contributes to the ongoing improvement of simulation techniques, ultimately leading to better, safer, and more efficient designs and processes. Validated models can then be used as digital twins and can be interrogated to understand and quantify the performance gaps between theoretical and physical systems. These insights can be used to build higher performing systems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Enhanced anomalous Nernst effect in disordered Dirac and Weyl materials

Here, we analyze the thermoelectric response of Dirac and Weyl semimetals using the semiclassical approach, focusing on the extrinsic contributions due to skew-scattering and side jump. Our results apply to the linear response Nernst effect in ferromagnetic Dirac materials such as Fe 3 Sn 2 and Weyl semimetals like Co 3 Sn 2 S 2 . In the case of Fe 3 Sn 2 we obtain a very good agreement with known experimental anomalous Hall effect measurements, and based on that we predict a large Nernst effect in this material.We also extend the investigation to second-order response, focusing on monolayer graphene on hBN with trigonal warping as an example. Our analysis indicates that the extrinsic contributions can be a significant component of anomalous Nernst response and may be used to explain an enhanced thermoelectric response.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Experimental Investigation on Heating Performance of a Cold Climate Thermoelectric-Assisted Heat Pump

To accelerate the electrification of air source heat pumps (ASHPs) in cold climates across the United States, various initiatives have been launched to enhance the effectiveness of ASHPs. One avenue of research involves incorporating thermoelectric (TE) technology into vapor compression refrigeration cycles. This study aims to assess the heating performance of a cold climate ASHP by employing TE modules as a liquid line subcooler. The tested system is a nominal 4.5-ton split heat pump utilizing R410A, equipped with a scroll compressor and an accumulator. An electronic expansion valve was employed for both cooling and heating modes. Two configurations of TE sub-coolers, one utilizing 2 TE bundles and the other 4 TE bundles, were integrated into the liquid line of the tested system. The heating performance of these configurations was evaluated. The results revealed that activating the TE subcooler led to a notable increase in total heat capacity, reaching 1318 W at -15.0 °C and 1164 W at -19.0 °C. The corresponding TE coefficients of performance (COPs) were 1.76 and 1.63, respectively. The activation of the TE sub-cooler resulted in a slight reduction in the overall system COP, with a decrease ranging from -2.6% to -4.2% for these two temperatures. The system COPs were measured at 2.10 and 1.86 for -15.0 °C and -19.0 °C, respectively. This prototype demonstrated a significant augmentation in heating capacity with a minimal sacrifice in COP.

Hu, Yifeng↗
DOE OSTI2023

Geometric Optimization of an Electrochemical Purification Cell to Prevent Corrosion in CSP Plants During Operation

When exposed to moisture or oxygen, molten chloride salts produce corrosive impurities which degrade containment alloys. This can significantly decrease the lifetime and increase costs of molten-salt-based systems. To overcome this barrier, we designed and modeled an electrochemical purification cell to remove the corrosive impurity MgOH+. Various reactor architectures, including continuous stirred tank reactors (CSTRs) and plug flow reactors (PFRs) were investigated. Steady-state thermoelectric properties were evaluated using analytical methods, allowing assessment of the effects of structure and design parameters such as flow rate, cell length, and cross-sectional area of molten salt. The results suggest that our design could most effectively increase reliability and decrease costs of molten-chloride-salt-based systems by protecting them during continuous operation using an annular plug flow reactor.

analytical modeling↗
DOE OSTI2020

Enhanced Low-Temperature Thermoelectric Performance in (PbSe) 1+δ (VSe 2 ) 1 Heterostructures due to Highly Correlated Electrons in Charge Density Waves

We explore the effect of charge density wave (CDW) on the in-plane thermoelectric transport properties of (PbSe) 1+δ (VSe 2 ) 1 and (PbSe) 1+δ (VSe 2 ) 2 heterostructures. In (PbSe) 1+δ (VSe 2 ) 1 we observe an abrupt 86% increase in the Seebeck coefficient, 245% increase in the power factor, and a slight decrease in resistivity over the CDW transition. This behavior is not observed in (PbSe) 1+δ (VSe 2 ) 2 and is rather unusual compared to the general trend observed in other materials. The abrupt transition causes a deviation from the Mott relationship through correlated electron states. Raman spectra of the (PbSe) 1+δ (VSe 2 ) 1 material show the emergence of additional peaks below the CDW transition temperature associated with VSe 2 material. Temperature-dependent in-plane X-ray diffraction (XRD) spectra show a change in the in-plane thermal expansion of VSe 2 in (PbSe) 1+δ (VSe 2 ) 1 due to lattice distortion. Here, the increase in the power factor and decrease in the resistivity due to CDW suggest a potential mechanism for enhancing the thermoelectric performance at the low temperature region.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Suppressing Charged Cation Antisites via Se Vapor Annealing Enables p-Type Dopability in AgBiSe 2 –SnSe Thermoelectrics

Cation disordering is commonly found in multinary cubic compounds, but its effect on electronic properties has been neglected because of difficulties in determining the ordered structure and defect energetics. An absence of rational understanding of the point defects present has led to poor reproducibility and uncontrolled conduction type. AgBiSe 2 is a representative compound that suffers from poor reproducibility of thermoelectric properties, while the origins of its intrinsic n-type conductivity remain speculative. Here, it is demonstrated that cation disordering is facilitated by Bi Ag charged antisite defects in cubic AgBiSe 2 which also act as a principal donor defect that greatly controls the electronic properties. Using density functional theory calculations and in situ Raman spectroscopy, how saturation annealing with selenium vapor can stabilize p-type conductivity in cubic AgBiSe 2 alloyed with SnSe at high temperatures is elucidated. With stable and controlled hole concentration, a peak is observed in the weighted mobility and the density-of-states effective mass in AgBiSnSe 3 , implying an increased valley degeneracy in this system. These findings corroborate the importance of considering the defect energetics for exploring the dopability of ternary thermoelectric chalcogenides and engineering electronic bands by controlling self-doping.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Emergence of asymmetric skew-scattering dominated anomalous Nernst effect in the spin gapless semiconductors Co 1+x Fe 1-x CrGa

Heusler alloy-based spin gapless semiconductors (SGSs) with very high Curie temperatures ( T C ) have recently gained enormous attention because of their unconventional electronic structures. They exhibit a nonzero band gap in one of the spin channels and a zero band gap in the other spin channel, making them an important class of materials for tunable spin transport. Here, we report the experimental observation of anomalous Nernst effect (ANE) in Co 1 + x Fe 1 - x CrGa ( x = 0 , 0.2, 0.4, and 0.5), which are the emerging quaternary Heusler alloy-based SGSs. While the electron-electron elastic scattering and the disorder-mediated weak localization effect play the major roles in electrical transport for all the samples at low temperatures, the magnon-drag effect was found to dominate the longitudinal thermoelectric transport. The ANE coefficient at room temperature increases from ≈ 0.018 μ V K - 1 for x = 0 to ≈ 0.063 μ V K - 1 for x = 0.5 , which is higher than that for Ni 81 Fe 19 and compressively strained SrRu O 3 films. Our analysis indicates that the observed ANE in these samples originates from asymmetric skew scattering of charge carriers.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electronic Topological Transition as a Route to Improve Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3

The electronic structure near the Fermi surface determines the electrical properties of the materials, which can be effectively tuned by external pressure. Bi0.5Sb1.5Te3 is a p-type thermoelectric material which holds the record high figure of merit at room temperature. Here it is examined whether the figure of merit of this model system can be further enhanced through some external parameter. With the application of pressure, it is surprisingly found that the power factor of this material exhibits λ behavior with a high value of 4.8 mW m –1 K –2 at pressure of 1.8 GPa. Such an enhancement is found to be driven by pressure-induced electronic topological transition, which is revealed by multiple techniques. Together with a low thermal conductivity of about 0.89 W m –1 K –1 at the same pressure, a figure of merit of 1.6 is achieved at room temperature. The results and findings highlight the electronic topological transition as a new route for improving the thermoelectric properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Intercalation as a versatile tool for fabrication, property tuning, and phase transitions in 2D materials

Recent advances in two-dimensional (2D) materials have led to the renewed interest in intercalation as a powerful fabrication and processing tool. Intercalation is an effective method of modifying the interlayer interactions, doping 2D materials, modifying their electronic structure or even converting them into starkly different new structures or phases. Herein, we discuss different methods of intercalation and provide a comprehensive review of various roles and applications of intercalation in next-generation energy storage, optoelectronics, thermoelectrics, catalysis, etc. The recent progress in intercalation effects on crystal structure and structural phase transitions, including the emergence of quantum phases are also reviewed.

2D materials↗
DOE OSTI2021

Thermoelectric current in a graphene Cooper pair splitter

Generation of electric voltage in a conductor by applying a temperature gradient is a fundamental phenomenon called the Seebeck effect. This effect and its inverse is widely exploited in diverse applications ranging from thermoelectric power generators to temperature sensing. Recently, a possibility of thermoelectricity arising from the interplay of the non-local Cooper pair splitting and the elastic co-tunneling in the hybrid normal metal-superconductor-normal metal structures was predicted. Here, we report the observation of the non-local Seebeck effect in a graphene-based Cooper pair splitting device comprising two quantum dots connected to an aluminum superconductor and present a theoretical description of this phenomenon. The observed non-local Seebeck effect offers an efficient tool for producing entangled electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗