SEARCH · Search NASA

Results for “tides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Hydrokinetic Energy Conversion by Flow-Induced Oscillation of Two Tandem Cylinders of Different Stiffness

Abstract The vortex-induced vibration for aquatic clean energy (VIVACE) converter harnesses hydrokinetic energy by enhancing flow-induced oscillations (FIOs) of elastically supported rigid cylinders in a river, tide, or ocean current. The harnessing power depends on the intensity of the oscillation, which is a consequence of the flow–structure interaction. The inflow condition for the downstream (second) cylinder is slowed down and perturbed by the upstream (first) cylinder, due to the shielding effect. Therefore, the optimal structural parameters, i.e., stiffness and damping ratio, for the second cylinder may be different from the first cylinder, in terms of energy harnessing. To improve the performance of the VIVACE converter, a series of experiments are conducted in a recirculating water channel, with various stiffness combinations of two cylinders in tandem. Results show that the stiffness of the second cylinder, K2, does not affect the energy harnessing power in vortex-induced vibration (VIV) occurring at low speeds, because the oscillation of the downstream cylinder in this velocity range is completely dominated by the wake of the upstream cylinder. K2 has a great influence on the harnessing power at higher velocities in the transition region from VIV to galloping and in galloping. Changing K2 onsets and enhances galloping at lower flow velocity and harnesses up to 110% more energy than the case of K1 = K2.

Engineering↗

DOE OSTI2020

Sea Level Rise in the CESM Large Ensemble: The Role of Individual Climate Forcings and Consequences for the Coming Decades

The emergence of a spatial pattern in the externally forced response (FR) of dynamic sea level (DSL) during the altimeter era has recently been demonstrated using climate models but our understanding of its initial emergence, drivers, and implications for the future is poor. Here the anthropogenic forcings of the DSL pattern are explored using the Community Earth System Model Large Ensemble (CESM-LE) and Single-Forcing Large Ensemble, a newly available set of simulations where values of individual forcing agents remain fixed at 1920 levels, allowing for an estimation of their effects. Statistically significant contributions to the DSL FR are identified for greenhouse gases (GHGs) and industrial aerosols (AERs), with particularly strong contributions resulting from AERs in the mid-twentieth century and GHGs in the late twentieth and twenty-first century. Secondary, but important, contributions are identified for biomass burning aerosols in the equatorial Atlantic Ocean in the mid-twentieth century, and for stratospheric ozone in the Southern Ocean during the late twentieth century. Key to understanding regional DSL patterns are ocean heat content and salinity anomalies, which are driven by surface heat and freshwater fluxes, ocean dynamics, and the spatial structure of seawater thermal expansivity. Finally, potential implications for the interpretation of DSL during the satellite era and the longer records from tide gauges are suggested as a topic for future research.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Mixing Driven by Critical Reflection of Near-Inertial Waves over the Texas–Louisiana Shelf

Studies of internal wave-driven mixing in the coastal ocean have been focused on internal tides, while wind-driven near-inertial waves (NIWs) have received less attention in this regard. Here, this study demonstrates a scenario of NIW-driven mixing over the Texas–Louisiana shelf. Supported by a high-resolution simulation over the shelf, the NIWs driven by land–sea breeze radiate downward at a sharp front and enhance the mixing in the bottom boundary layer where the NIWs are focused because of slantwise critical reflection. The criterion for slantwise critical reflection of NIWs is ω=$\sqrt{f{^2}+s^{2}_{bot}N{^2}(1-s_{ρ}/s_{bot})}$ (where ω is the wave frequency, s bot is the bottom slope, and s ρ is the isopycnal slope), under the assumption that the mean flow is in a thermal wind balance and only varies in the slope-normal direction. The mechanism driving the enhanced mixing is explored in an idealized simulation. During slantwise critical reflection, NIWs are amplified with enhanced shear and periodically destratify a bottom boundary layer via differential buoyancy advection, leading to periodically enhanced mixing. Turbulent transport of tracers is also enhanced during slantwise critical reflection of NIWs, which has implications for bottom hypoxia over the Texas–Louisiana shelf.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Microbial community dynamics and coexistence in a sulfide-driven phototrophic bloom

Background: Lagoons are common along coastlines worldwide and are important for biogeochemical element cycling, coastal biodiversity, coastal erosion protection and blue carbon sequestration. These ecosystems are frequently disturbed by weather, tides, and human activities. Here, we investigated a shallow lagoon in New England. The brackish ecosystem releases hydrogen sulfide particularly upon physical disturbance, causing blooms of anoxygenic sulfur-oxidizing phototrophs. To study the habitat, microbial community structure, assembly and function we carried out in situ experiments investigating the bloom dynamics over time. Results: Phototrophic microbial mats and permanently or seasonally stratified water columns commonly contain multiple phototrophic lineages that coexist based on their light, oxygen and nutrient preferences. We describe similar coexistence patterns and ecological niches in estuarine planktonic blooms of phototrophs. The water column showed steep gradients of oxygen, pH, sulfate, sulfide, and salinity. The upper part of the bloom was dominated by aerobic phototrophic Cyanobacteria, the middle and lower parts by anoxygenic purple sulfur bacteria (Chromatiales) and green sulfur bacteria (Chlorobiales), respectively. We show stable coexistence of phototrophic lineages from five bacterial phyla and present metagenome-assembled genomes (MAGs) of two uncultured Chlorobaculum and Prosthecochloris species. In addition to genes involved in sulfur oxidation and photopigment biosynthesis the MAGs contained complete operons encoding for terminal oxidases. The metagenomes also contained numerous contigs affiliating with Microviridae viruses, potentially affecting Chlorobi. Our data suggest a short sulfur cycle within the bloom in which elemental sulfur produced by sulfide-oxidizing phototrophs is most likely reduced back to sulfide by Desulfuromonas sp. Conclusions: The release of sulfide creates a habitat selecting for anoxygenic sulfur-oxidizing phototrophs, which in turn create a niche for sulfur reducers. Strong syntrophism between these guilds apparently drives a short sulfur cycle that may explain the rapid development of the bloom. The fast growth and high biomass yield of Chlorobi-affiliated organisms implies that the studied lineages of green sulfur bacteria can thrive in hypoxic habitats. This oxygen tolerance is corroborated by oxidases found in MAGs of uncultured Chlorobi. The findings improve our understanding of the ecology and ecophysiology of anoxygenic phototrophs and their impact on the coupled biogeochemical cycles of sulfur and carbon.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Modeled Hourly Tidal Current Velocities, Directions, and Heights from May 1 - September 1, 2005 at Two Points Near East Forelands and Tyonek in Cook Inlet, Alaska

This dataset includes modeled tidal current velocities, direction and depth at two locations in East and North Forelands (60.716, -151.434 and 61.024, -151.157) near Nikiski and Tyonek, respectively, in Cook Inlet, Alaska. Data from two grid cells were provided by the Pacific Northwest National Laboratory based on a tidal hydrodynamic model that characterized the tidal stream resources in Cook Inlet for a period from May 1 to September 1, 2005 (Wang and Yang 2020). The model grid size had a horizontal spatial resolution of 100 m at East Forelands and 200 m at Tyonek; mean sea level (MSL) depth was 47.9 m and 23.7 m at each respective site, and there were 10 depth bins that ranged in size with the tide from 4.3-5.2 m and 1.9-2.8 m, respectively (Wang and Yang 2020).

16 TIDAL AND WAVE POWER↗

DOE OSTI2021

UNH TDP - Concurrent Measurements of Inflow, Power Performance, and Loads for a Grid-Synchronized Vertical Axis Cross-Flow Turbine Operating in a Tidal Estuary

This data was collected between October 12 and December 15 of 2021 at the University of New Hampshire (UNH) and Atlantic Marine Energy Center (AMEC) turbine deployment platform (TDP). This data set includes over 29 days of grid connected turbine operation during this 65 day time frame. The priority for this measurement campaign was to collect data while the turbine was electrically connected to the grid by means of a rectifier and inverter. The Fall_2021_UNH_Measurement_Timeline.png highlights when each instrument was functioning and the Fall_2021_UNH_Test_Log.jpg indicates the four main regions for analysis available from this measurement campaign. The TDP is a floating structure moored on the Portsmouth facing side of Memorial Bridge pier #2, which spans the Piscataqua River between Portsmouth, NH and Kittery, ME. The Piscataqua River connects the Great Bay Estuary to the Gulf of Maine and the river currents are dominated by tidal forcing with water velocities exceeding 2.5 m/s during spring ebb tides at this site which were previously characterized by Kaelin Chancey (Assessment Of The Localized Flow And Tidal Energy Conversion System At An Estuarine Bridge - UNH MS Thesis 2019). The turbine under test was a modified New Energy Corporation (Calgary, CA) model EVG-025 4-blade H-Darrius type vertical axis cross flow turbine that rotates in the clockwise direction with a rotor diameter of 3.2m and blade length of 1.7m. The hydro-foil profile was a NACA 0021 with a 10 inch chord length and a blade preset pitch angle of +4deg with a positive angle corresponding with the toe in direction. The standard EVG-025 has a rotor diameter of 3.4m and its rated power output is 25kW at 3 m/s. The rotor diameter was reduced to accommodate the size of the existing TDP moon-pool. This project was pursued to quantify device performance for cross flow turbines operating in a marine environment. Accurate physical models, to characterize cross flow turbine performance, require real operational data sets due to the complexity of blade fluid interactions. This data can help support model development which will help predict turbine performance when analyzing perspective project locations in the future. Instrumentation was deployed to measure; water speed/direction, electrical power output, turbine shaft speed, turbine thrust force, and platform motion. Concurrent measurements of these parameters allow for correlations (cause and affect) to be inferred, allowing for characterization of device performance over a range of operating conditions. Water currents were measured using Acoustic Doppler Current Profilers (ADCP's) and Acoustic Doppler Velocimeters (ADV's) directly upstream and downstream of the turbine for inflow, wake and turbulence measurements. Electrical power output was measured using the Voltsys rectifier and the Shark power meter. Shaft speed was calculated based on the Voltsys measurements of the permanent magnet three phase generator AC generation frequency, coupled directly to the cross flow turbine under test (i.e., no gear box). Platform motions were captured using a Yost IMU (inertial measurement unit). Turbine thrust loading was measured using a reaction arm about the turbine deployment platform spanning beam, where two bi-directional load cells were connected to the system via a pinned connection. This submission includes zipped folders for each instrument containing quality controlled (QC'd) data in daily .csv files for the relevant duration specific to each instrument, along with separate .csv file that contains the units for each variable. Some instrument daily files are quite large and can pose a challenge for a visual spreadsheet editor to open. A processing software like MATLAB or Python is recommended. Note the degree of QC varied between each instrument due to time constraints. Particular time and attention was given to perform quality control tests on the acoustic based instruments that are particularly suscep...

16 TIDAL AND WAVE POWER↗

DOE OSTI2022

In-Situ Blade Strain Measurements of a Crossflow Turbine Operating in a Tidal Flow

This data was collected between October 25 and December 12 of 2022 at the University of New Hampshire (UNH) and Atlantic Marine Energy Center (AMEC) turbine deployment platform (TDP). The goal was to collect blade strain data from a crossflow turbine operating in a tidal flow. A table in ('Deployment Schedule.PNG') outlines the various dates when each instrument was operational, and more details can be found via literature listed in 'Related Publications'.txt. This dataset includes zipped folders for each instrument containing data in .csv files for the relevant duration specific to each instrument, along with separate README file for each measurement. Some instrument files are quite large and can pose a challenge for a visual spreadsheet editor to open. A processing software like MATLAB or Python is recommended. All data contained in this submission is unfiltered/unprocessed data unless otherwise noted in the README file. Blade strain was measured using 8 foil-based strain gauges along the span of a single turbine blade. Water currents were measured using Acoustic Doppler Current Profilers (ADCP's) and Acoustic Doppler Velocimeters (ADV's) both upstream and downstream of the turbine for inflow, wake and turbulence measurements. Electrical power output was measured using the Voltsys rectifier. Shaft speed was calculated based on the Voltsys measurements of the permanent magnet three phase generator AC generation frequency, coupled directly to the cross flow turbine under test (i.e., no gear box). Platform motions were captured using a Yost IMU (inertial measurement unit). Turbine thrust loading was measured using a reaction arm about the turbine deployment platform spanning beam, where two bi-directional load cells were connected to the system via a pinned connection. The TDP is a floating structure moored on the Portsmouth facing side of Memorial Bridge pier #2, which spans the Piscataqua River between Portsmouth, NH and Kittery, ME. The Piscataqua River connects the Great Bay Estuary to the Gulf of Maine and the river currents are dominated by tidal flow with water velocities exceeding 2.5 m/s during spring ebb tides at this site which were previously characterized by Chancey 2019. The turbine under test was a modified New Energy Corporation (Calgary, CA) model EVG-025 4-blade H-Darrius type vertical axis cross flow turbine that rotates in the clockwise direction with a rotor diameter of 3.2m and blade length of 1.7m. The hydro-foil profile was a NACA 0021 with a 10 inch chord length and a blade preset pitch angle of +4deg with a positive angle corresponding with the toe in direction. The standard EVG-025 has a rotor diameter of 3.4m and its rated power output is 25kW at 3 m/s. The rotor diameter was reduced to accommodate the size of the existing TDP moon-pool. A single blade of this turbine was further modified to accommodate 8 full-bridge strain gauges (Bharath et al 2023, Bichanich et al 2024). For power performance and other relevant details on the turbine and its characteristics, see O'Byrne 2022.

16 TIDAL AND WAVE POWER↗

DOE OSTI2023

Stable water isotopes and tritium data from porewater at Elkhorn Slough

Salt marshes are dynamic hydrologic systems where terrestrial groundwater, terrestrial surface water, and seawater mix due to bi-directional flows and pressure gradients. Due to the counteracting terrestrial and marine forcings that control these environments, we do not comprehensively understand water fluxes in these complex coastal systems. To understand the water sources, flow directions, and velocities in salt marsh porewater, we collected geochemical tracers across a hillslope-to-salt marsh continuum in a salt marsh experiencing daily inundation of estuarine surface water (SW) from tides and mixing of fresh seasonal groundwater. The experimental transect is located at the Elkhorn Slough National Estuarine Research Reserve.Here we present a data table (.csv) with the results of electrical conductivity, stable water isotopes, and tritium in porewater across several elevations in the hillslope-to-salt marsh continuum (information in the data set). We analyzed the stable water isotope samples by cavity ring-down spectroscopy in a Picarro L2130-i at the University of California Santa Cruz (accuracy of 0.025‰ and 0.1‰ for δ18O and δ2H, respectively). We measured the electric conductivity of the samples with an Orion Star™ A329 multiparameter meter (0.5% accuracy, Thermo Fisher Scientific, Massachusetts, USA). We analyzed 3H samples at Lawrence Livermore National Laboratory by helium-3 accumulation (Clarke et al., 1976; Surano et al., 1992).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Model simulations of Plum Island Ecosystems LTER low marsh site using ELM-PFLOTRAN

Model simulations using the E3SM Land Model (ELM) coupled to the PFLOTRAN reactive transport model via the Alquimia interface. The simulations were conducted for a tidal salt marsh at the Plum Island Ecosystems LTER near Rowley, Massachusetts, USA. Model simulations were forced using site-specific tidal cycles and salinity, and the simulations used a biogeochemical reaction network including aerobic decomposition, sulfate reduction, iron reduction, and methanogenesis. Model outputs include simulated carbon stocks, carbon dioxide and methane fluxes, and porewater concentrations of key solutes related to sulfur, iron, and carbon cycling. The model simulations included a saline simulation (with tidal sulfate inputs), a fresh simulation (with low salinity and low sulfate inputs), and a saline simulation with lower vegetation productivity to represent the effect of salinity on vegetation. These simulations were conducted to demonstrate that a new model framework incorporating subsurface redox and biogeochemical interactions into a land surface model could reproduce measured surface greenhouse gas fluxes and biogeochemical dynamics in tidal marsh ecosystems, and to test whether including redox interactions in a land surface model would allow the model to resolve contrasts in biogeochemical cycling and greenhouse gas production between saline and freshwater wetlands.The data package includes gzipped tar archives (which can be expanded using standard tar and gzip utilities) of model outputs from three model configurations: saline subsurface and reduced vegetation productivity related to salinity; saline subsurface with vegetation productivity not reduced; and freshwater. Also included are code for the modified E3SM model, Alquimia interface, and PFLOTRAN reactive transport simulator in gzipped tar format; plain text parameter and configuration files; python code files for visualizing model output and defining model configurations; and model output, tide and salinity forcing, and configuration files in netCDF format. See the README.md file in the data package for a detailed description of all files contained in the package. All files are in netCDF (.nc), gzipped tar archive (.tar.gz or .tgz), or text (all other files).Updated: May 13, 2024. Model output, E3SM code, PFLOTRAN input files, and python codes for visualizing results were updated to reflect changes made for the manuscript revision. The updated archive reflects the code and model output from the final accepted manuscript. Changes included updated reaction parameters reflecting improved parameterization and additional comparisons with field measurements. E3SM code changes included better support for multiple grid cells and improved flow and transport parameterization.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Biogeochemistry simulations for the Salt Marsh Accretion Response to Temperature eXperiment (SMARTX)

Coastal ecosystems have been largely ignored in Earth system models but are important zones for carbon and nutrient processing. Interactions between water, microbes, soil, sediments, and vegetation are important for mechanistic representation of coastal processes and ecosystem function. To investigate the role of these feedbacks, we used a reactive transport model (PFLOTRAN) that has the capability to be connected to the Energy Exascale Earth System Model (E3SM). PFLOTRAN was used to incorporate redox reactions and track chemical species important for coastal ecosystems as well as define simple representations of vegetation dynamics. Our goal was to incorporate oxygen flux, salinity, pH, sulfur cycling, and methane production along with plant-mediated transport of gases and tidal flux. Using porewater profile and incubation data for model calibration and evaluation, we were able to create depth-resolved biogeochemical soil profiles for saltmarsh habitat and use this updated representation to simulate direct and indirect effects of elevated CO2 and temperature on subsurface biogeochemical cycling. We found that simply changing the partial pressure of CO2 or increasing temperature in the model did not fully reproduce observed changes in the porewater profile, but the inclusion of plant or microbial responses to CO2 and temperature manipulations was more accurate in representing porewater concentrations. This indicates the importance of characterizing tightly coupled vegetation-subsurface processes for developing predictive understanding and the need for measurement of plant-soil interactions on the same time scale to understand how hotspots or moments are generated.Included in this data package are PFLOTRAN input (PFLOTRAN input files and chemical database) files for simulating single column biogeochemistry, root, and tide interactions at the Global Change Research Wetland (Kirkpatrick Marsh; Edgewater, MD). The biogeochemical network includes soil organic matter decomposition, nitrogen, iron, and sulfur cycling, and methanogenesis. Reduced species can be oxidized and plant processes include oxygen and nutrient priming, methane release, and nutrient uptake.Inputs:TAI_database.dat - geochemical database for reactions, more information on database structure and variables can be found here https://www.pflotran.org/documentation/user_guide/cards/pages/geochemical_database.htmlswamp.in - input file for biogeochemical network in PFLOTRANswamp_eCO2.in - input file for biogeochemical network in PFLOTRAN with input gas partial pressures/concentrations adjusted for elevated CO2 treatmentsOutputs:swamp_obs_0.tec - hourly porewater concentrations from from multiple depths in the soil columnswamp_eCO2_obs_0.tec - hourly porewater concentrations from multiple depths in the soil column for elevated CO2 treatmentsPFLOTRAN code access: https://github.com/fmyuan/pflotran-elm-interface.git

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Five Years of Dissolved Oxygen, Temperature, Salinity, Depth, Weather Data from a Transitioning Wetland at Beaver Creek, Washington, USA

Groundwater dissolved oxygen (DO) variability in coastal system remains poorly understood despite its importance for biogeochemical cycling and ecosystem modeling. Here we investigate the temporal variability in groundwater DO and its hydro-climatic drivers across hourly to seasonal timescales in a transitioning wetland at Beaver Creek, Washington, USA. The site is transitioning from a freshwater forest to a brackish tidal wetland following removal of a barrier in 2014 that prevented tides from accessing the freshwater creek. By utilizing novel optical dissolved oxygen instrumentation (Opti O2, LLC) we obtained continuous, high-frequency (5-minute), in-situ measurements of DO from the flood-plain from June 26th, 2019 through September 30th, 2024. This 63 month dataset is comprised of groundwater dissolved oxygen, temperature, water level and salinity timeseries from the floodplain. This dataset also includes rainfall, air pressure, air temperature, and solar radiation data collected with a co-located Campbell ClimaVUE50 weather sensor. All data is contained within a single csv (2019-06-26 to 2024-09-30 Beaver Creek DO, saln, BGS, temp, weather.csv) that can easily be viewed either using software such as Excel or using any text editor.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Data-model files associated with the manuscript "Modeling the Effects of Wetland Restoration on Coastal Hydrology: A Case Study of Elkhorn Slough Watershed, California"

This package contains the data, simulation setups, notebooks and figures used in “Modeling the Effects of Wetland Restoration on Coastal Hydrology: A Case Study of Elkhorn Slough Watershed, California” (Xu et al., 2025). In this study, we selected Elkhorn Slough, a tidal estuary, in California, to investigate the impact of wetland restoration and sea level rise on coastal hydrology using the process-based coastal hydrologic model, Advanced Terrestrial Simulator (ATS), informed by site-specific data. We designed a novel modeling workflow for incorporating wetland restoration features into land cover and soil properties for the model parameterization. The validation results demonstrate a strong agreement between modeled and observed data. We studied the characteristics of coastal watershed hydrology, then focused on the surface water dynamics at two wetland sites within Elkhorn Slough, a reference site and a restored site. Our simulation results indicate that the restored site successfully maintains surface elevation, resulting in reduced surface inundation. We also examined the impact of wetland restoration under expected sea level rise over the next few decades. The low-lying Yampah Marsh, the reference site, is likely to be inundated due to future sea level rise when highest tides arrive; while a higher percentage of Hester Marsh, the restored site, would retain marsh vegetation in coming decades, regardless of tidal conditions. Our study provides important information for examining the outcome of restoration practices that include surface elevation in tidal wetlands under climate changes.Several files can be found from this data package.1. README.md: This file describes the title, journal, co-authors, abstract, repository structure and model version.2. Simulation_Setups.zip: The file contains the model configuration files (XML format) for ATS. 3. Notebooks.zip: The file contains the Jupyter notebooks for generating the pre- and post-restoration meshes and the meshes of future scenarios. 4. Figures.zip: The file contains the figures used in the manuscript.5. Data.zip: The file contains the data used to drive the model simulations, including watershed and wetlands boundaries, mesh files and references to additional datasets (e.g., meteorological forcing, tidal dataset, DEMs, land cover, soil properties). Also, it contains water level observations at the restored wetland.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Specific conductivity and salinity of the Parker River, PIE LTER, Plum Island Sound MA, August-November 2022

This dataset contains specific conductivity and calculated salinity data of Parker River water at a tidal brackish wetland dominated by Typha angustifolia at the upper estuary of the Plum Island Sound in Newbury, Massachusetts (MA) within the Plum Island Ecosystems Long Term Ecological Research site (PIE LTER). Measurements were taken to evaluate temporal changes in surface water salinity in high frequency to characterize boundary conditions of soil and plant responses to changes in salinity. A PVC pipe was installed in a low elevation spot in the creek bank so that the bottom of the pipe sat on the sediment surface allowing flushing with water during flooding. Raw measurements were collected using an Onset HOBO U24-002 Saltwater Conductivity/Salinity data logger. The specific conductance and salinity measurements were corrected and calculated respectively using Onset’s HOBOware software and reference specific conductivity measurements taken in tandem with the first and last points recorded by the HOBO sensor. These reference measurements were taken using a HACH HQ14D Portable Conductivity Meter. Because of the installation design, only data one hour before and after high tide are used. Metadata files Typha_ctd_salinity_dd.csv and Typha_ctd_salinity_flmd.csv contain detailed information on data variables, sampling and QA/QC methods, and site location.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Specific conductivity and salinity of the Parker River, PIE LTER, Plum Island Sound MA, March-November 2023

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Compound Flooding in Halmstad: Common Causes, Interannual Variability and the Effects of Climate Change

Compound flooding was investigated in Halmstad on the Swedish west coast. The highest sea level ever recorded in Sweden was recorded by the Halmstad tide gauge. Moreover, through the city runs Nissan, one of the largest hydropower-producing rivers in southern Sweden. Together these features make the city an interesting location to study compound flooding. Co-variability between different hazards are studied using a unique set of downscaled climate scenario projections produced using state-of-the-art regional atmosphere, ocean and hydrological models. River discharge and sea level annual maxima are found to be correlated with peak strength on interannual time scales. This co-variability is found to derive from a mutual dependence that these hazards have on the North Atlantic Oscillation (NAO). Precipitation also shares this dependence in winter months and acts as a driver, building up the fluvial river hazard, while potentially adding additional pluvial hazard. Trends are also assessed, and it was found that future changes in compound flooding will most likely be driven primarily by mean sea level rise and secondarily by increases in mean river discharge.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

AmeriFlux US-Hsm Hill Slough Marsh

This is the AmeriFlux version of the carbon flux data for the site US-Hsm Hill Slough Marsh. Site Description - The site is currently a diked marsh - upland ecotone located at the northern Suisun Marsh. It will undergo tidal restoration in Fall 2021. Restoration work is done by Ducks Unlimited Inc. and will cover an area of 649 acres. After levee breaches, the site tower will be in a high marsh system. Water level at high tide is estimated to be 0.5-1 m above the soil. Ducks Unlimited, Inc. and the Berkeley Biometeorology lab are working together to evaluate the effects of the proposed tidal marsh restoration project.

Kyle_Delwiche, Kyle_Delwiche↗

DOE OSTI2024

AmeriFlux AR-Rom Romano Mar Chiquita BA

This is the AmeriFlux version of the carbon flux data for the site AR-Rom Romano Mar Chiquita BA. Site Description - The site was at Mar Chiquita coastal lagoon, located in the southeast of Buenos Aires province, Argentina, in an agricultural establishment (“Antonio Romano S. A.”), whose main activity was cattle production. A flux tower was settled within the raised high marsh approximately 6 km from the sea and 2 km from a lagoon. The water body showed two hydrographic areas with marine and inland influence regulated by the sea tides and rainfall respectively. There were sandy dunes occupied by open vegetation composed of grasses and herb species. Physiognomy surrounding the measurement site was the characteristic evergreen grassy landscape with an average canopy height of 0.7 m and little phenological variation throughout the year.

Gassmann, Maria Isabel↗

DOE OSTI2025

AmeriFlux FLUXNET-1F US-Hsm Hill Slough Marsh

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-Hsm Hill Slough Marsh. This is the FLUXNET version of the carbon flux data for the site US-Hsm Hill Slough Marsh produced by applying the standard ONEFlux (1F) software. Site Description - The site is currently a diked marsh - upland ecotone located at the northern Suisun Marsh. It will undergo tidal restoration in Fall 2021. Restoration work is done by Ducks Unlimited Inc. and will cover an area of 649 acres. After levee breaches, the site tower will be in a high marsh system. Water level at high tide is estimated to be 0.5-1 m above the soil. Ducks Unlimited, Inc. and the Berkeley Biometeorology lab are working together to evaluate the effects of the proposed tidal marsh restoration project.

Kyle_Delwiche, Kyle_Delwiche [University of Califo↗