Search NASA⌕ Search

SEARCH · Search NASA

Results for “time invariance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Robust Stabilization of Uncertain Systems Based on Energy Dissipation Concepts

Robust stability conditions obtained through generalization of the notion of energy dissipation in physical systems are discussed in this report. Linear time-invariant (LTI) systems which dissipate energy corresponding to quadratic power functions are characterized in the time-domain and the frequency-domain, in terms of linear matrix inequalities (LMls) and algebraic Riccati equations (ARE's). A novel characterization of strictly dissipative LTI systems is introduced in this report. Sufficient conditions in terms of dissipativity and strict dissipativity are presented for (1) stability of the feedback interconnection of dissipative LTI systems, (2) stability of dissipative LTI systems with memoryless feedback nonlinearities, and (3) quadratic stability of uncertain linear systems. It is demonstrated that the framework of dissipative LTI systems investigated in this report unifies and extends small gain, passivity, and sector conditions for stability. Techniques for selecting power functions for characterization of uncertain plants and robust controller synthesis based on these stability results are introduced. A spring-mass-damper example is used to illustrate the application of these methods for robust controller synthesis.

Gupta, Sandeep↗
NASA NTRS2002

Nonlinear Dynamic Models in Advanced Life Support

To facilitate analysis, ALS systems are often assumed to be linear and time invariant, but they usually have important nonlinear and dynamic aspects. Nonlinear dynamic behavior can be caused by time varying inputs, changes in system parameters, nonlinear system functions, closed loop feedback delays, and limits on buffer storage or processing rates. Dynamic models are usually cataloged according to the number of state variables. The simplest dynamic models are linear, using only integration, multiplication, addition, and subtraction of the state variables. A general linear model with only two state variables can produce all the possible dynamic behavior of linear systems with many state variables, including stability, oscillation, or exponential growth and decay. Linear systems can be described using mathematical analysis. Nonlinear dynamics can be fully explored only by computer simulations of models. Unexpected behavior is produced by simple models having only two or three state variables with simple mathematical relations between them. Closed loop feedback delays are a major source of system instability. Exceeding limits on buffer storage or processing rates forces systems to change operating mode. Different equilibrium points may be reached from different initial conditions. Instead of one stable equilibrium point, the system may have several equilibrium points, oscillate at different frequencies, or even behave chaotically, depending on the system inputs and initial conditions. The frequency spectrum of an output oscillation may contain harmonics and the sums and differences of input frequencies, but it may also contain a stable limit cycle oscillation not related to input frequencies. We must investigate the nonlinear dynamic aspects of advanced life support systems to understand and counter undesirable behavior.

Jones, Harry↗
NASA NTRS1976

Invariants of optimal minimal-order observer-based compensators

The relations characterizing the optimal minimal-order observer-based compensators for a linear time-invariant multivariable system in a certain canonical form, with a random initial state (or equivalently, known initial state with white driving noise) have been reported by Miller and independently by others. In this note, we establish in general that the plant transfer function uniquely determines the optimal compensator transfer function, and that this characterizes precisely the degrees of freedom in the compensator design. Any two realizations of the optimal compensator dynamics yield the same performance.

Blanvillain, P.↗
NASA NTRS1978

Invariants of optimal minimal-order observer-based compensators

The relations characterizing the optimal minimal-order observer-based compensators for a linear time-invariant multivariable system with a random initial state (or, equivalently, known initial state and white plant-driving noise) have been reported by Miller (1973). In this note we establish in general that the plant transfer function uniquely determines the optimal compensator transfer function, and that this characterizes precisely the degrees of freedom in the compensator design; computational implications of this result are indicated.

Blanvillain, P. J.↗
NASA NTRS1991

Reliable fusion of control and sensing in intelligent machines

Although robotics research has produced a wealth of sophisticated control and sensing algorithms, very little research has been aimed at reliably combining these control and sensing strategies so that a specific task can be executed. To improve the reliability of robotic systems, analytic techniques are developed for calculating the probability that a particular combination of control and sensing algorithms will satisfy the required specifications. The probability can then be used to assess the reliability of the design. An entropy formulation is first used to quickly eliminate designs not capable of meeting the specifications. Next, a framework for analyzing reliability based on the first order second moment methods of structural engineering is proposed. To ensure performance over an interval of time, lower bounds on the reliability of meeting a set of quadratic specifications with a Gaussian discrete time invariant control system are derived. A case study analyzing visual positioning in robotic system is considered. The reliability of meeting timing and positioning specifications in the presence of camera pixel truncation, forward and inverse kinematic errors, and Gaussian joint measurement noise is determined. This information is used to select a visual sensing strategy, a kinematic algorithm, and a discrete compensator capable of accomplishing the desired task. Simulation results using PUMA 560 kinematic and dynamic characteristics are presented.

Mcinroy, John E.↗
NASA NTRS2013

Psychoacoustic Analysis of Synthesized Jet Noise

An aircraft noise synthesis capability is being developed so the annoyance caused by proposed aircraft can be assessed during the design stage. To make synthesized signals as realistic as possible, high fidelity simulation is required for source (e.g., engine noise, airframe noise), propagation and receiver effects. This psychoacoustic study tests whether the jet noise component of synthesized aircraft engine noise can be made more realistic using a low frequency oscillator (LFO) technique to simulate fluctuations in level observed in recordings. Jet noise predictions are commonly made in the frequency domain based on models of time-averaged empirical data. The synthesis process involves conversion of the frequency domain prediction into an audible pressure time history. However, because the predictions are time-invariant, the synthesized sound lacks fluctuations observed in recordings. Such fluctuations are hypothesized to be perceptually important. To introduce time-varying characteristics into jet noise synthesis, a method has been developed that modulates measured or predicted 1/3-octave band levels with a (<20Hz) LFO. The LFO characteristics are determined through analysis of laboratory jet noise recordings. For the aft emission angle, results indicate that signals synthesized using a generic LFO are perceived as more similar to recordings than those using no LFO, and signals synthesized with an angle-specific LFO are more similar to recordings than those synthesized with a generic LFO.

Okcu, Selen↗
NASA NTRS1972

Electric field variations during substorms: OGO-6 measurements

The OGO-6 electric field measurements make it clear that the general pattern of high latitude electric fields in magnetic time-invariant latitude coordinates is not highly variable and that when unusual variations, or field distributions, occur they are relatively isolated in time and spatial extent. Thus, electric field changes on a global scale cannot, in general, be evoked as a direct cause of substorms. Polar traverses along the 18(h) to 6(h) magnetic time meridian show that the sum of potential drops across the evening auroral belt and morning auroral belt approximately equals the potential drop across the polar cap. The integrated polar cap potential drop ranges from 20 to 100 keV and values in the center of this range are most common under conditions of moderate magnetic disturbance. Roughly near 18(h) magnetic local time, a latitudinally narrow strip at the transition between auroral belt and polar cap fields exhibits unusually large field fluctuations immediately following the sudden onset of a negative bay at later magnetic local times. It appears likely that this spatially isolated correlation is related to an effect rather than a cause of substorm enhancement.

Heppner, J. P.↗
NASA NTRS2010

Verifiable Adaptive Control with Analytical Stability Margins by Optimal Control Modification

This paper presents a verifiable model-reference adaptive control method based on an optimal control formulation for linear uncertain systems. A predictor model is formulated to enable a parameter estimation of the system parametric uncertainty. The adaptation is based on both the tracking error and predictor error. Using a singular perturbation argument, it can be shown that the closed-loop system tends to a linear time invariant model asymptotically under an assumption of fast adaptation. A stability margin analysis is given to estimate a lower bound of the time delay margin using a matrix measure method. Using this analytical method, the free design parameter n of the optimal control modification adaptive law can be determined to meet a specification of stability margin for verification purposes.

Nguyen, Nhan T.↗
NASA NTRS1985

Chandrasekhar equations for infinite dimensional systems

The existence of Chandrasekhar equations for linear time-invariant systems defined on Hilbert spaces is investigated. An important consequence is that the solution to the evolutional Riccati equation is strongly differentiable in time, and that a strong solution of the Riccati differential equation can be defined. A discussion of the linear-quadratic optimal-control problem for hereditary differential systems is also included.

Ito, K.↗
NASA NTRS1972

Effects of atmospheric irregularities on sonic-boom propagation.

A review is given of information obtained in recent years concerning the effects on sonic-boom signatures of departures of the atmosphere from a perfectly stratified time invariant model. These effects include the observed random variations in boom overpressures from those expected for a stratified atmosphere, the anomalously large and variable rise times, and the occurrence of spiked or rounded waveforms rather than the characteristic N waves. The extent of the variability in data recorded during actual flight tests is summarized in the form of histograms, representing experimentally obtained probability density functions. The physical mechanisms believed to be responsible for the variations and the anomalous features in the signatures are described. These include refraction and subsequent wavefront rippling by turbulence, the possible focusing or defocusing of rays, the formation of caustics, and the phenomenon of wavefront folding, diffraction, and scattering. Recent statistical theories of shock propagation through a turbulent atmosphere proposed by Crow, George and Plotkin, Pierce, Horning, and others are reviewed.

Pierce, A. D.↗
NASA NTRS2008

Nonlinear Reduced-Order Analysis with Time-Varying Spatial Loading Distributions

Oscillating shocks acting in combination with high-intensity acoustic loadings present a challenge to the design of resilient hypersonic flight vehicle structures. This paper addresses some features of this loading condition and certain aspects of a nonlinear reduced-order analysis with emphasis on system identification leading to formation of a robust modal basis. The nonlinear dynamic response of a composite structure subject to the simultaneous action of locally strong oscillating pressure gradients and high-intensity acoustic loadings is considered. The reduced-order analysis used in this work has been previously demonstrated to be both computationally efficient and accurate for time-invariant spatial loading distributions, provided that an appropriate modal basis is used. The challenge of the present study is to identify a suitable basis for loadings with time-varying spatial distributions. Using a proper orthogonal decomposition and modal expansion, it is shown that such a basis can be developed. The basis is made more robust by incrementally expanding it to account for changes in the location, frequency and span of the oscillating pressure gradient.

Prezekop, Adam↗
NASA NTRS1982

The sensitivity of numerically simulated climates to land-surface boundary conditions

Eleven sensitivity experiments that were made with general circulation models to see how land-surface boundary conditions can influence the rainfall, temperature, and motion fields of the atmosphere are discussed. In one group of experiments, different soil moistures or albedos are prescribed as time-invariant boundary conditions. In a second group, different soil moistures or different albedos are initially prescribed, and the soil moisture (but not the albedo) is allowed to change with time according to the governing equations for soil moisture. In a third group, the results of constant versus time-dependent soil moistures are compared.

Mintz, Y.↗
NASA NTRS1984

The sensitivity of numerically simulated climates to land-surface boundary conditions

Eleven sensitivity experiments that were made with general circulation models to see how land-surface boundary conditions can influence the rainfall, temperature, and motion fields of the atmosphere are discussed. In one group of experiments, different soil moistures or albedos are prescribed as time-invariant boundary conditions. In a second group, different soil moistures or different albedos are initially prescribed, and the soil moisture (but not the albedo) is allowed to change with time according to the governing equations for soil moisture. In a third group, the results of constant versus time-dependent soil moistures are compared. Previously announced in STAR as N83-27536

Mintz, Y.↗
NASA NTRS1985

Chandrasekhar equations for infinite dimensional systems

Chandrasekhar equations are derived for linear time invariant systems defined on Hilbert spaces using a functional analytic technique. An important consequence of this is that the solution to the evolutional Riccati equation is strongly differentiable in time and one can define a strong solution of the Riccati differential equation. A detailed discussion on the linear quadratic optimal control problem for hereditary differential systems is also included.

Ito, K.↗
NASA NTRS1993

A Monte Carlo approach to the analysis of control system robustness

Stochastic robustness, a simple technique used to estimate the stability and performance robustness of linear, time-invariant systems, is described. The scalar probability of instability is introduced as a measure of stability robustness. Examples are given of stochastic performance robustness measures based on classical time-domain specifications. The relationship between stochastic robustness measures and control system design parameters is discussed. The technique is demonstrated by analyzing an LQG/LTR system designed for a flexible robot arm. It is concluded that the analysis of stochastic robustness offers a good alternative to existing robustness metrics.

Ray, Laura R.↗