Search NASA⌕ Search

SEARCH · Search NASA

Results for “top physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Neutron techniques

Three experimental methods are described which hold the most promise for improved energy resolution, time resolution and sensitivity in the detection of solar neutrons on satellites and/or long duration balloon flights: the neutron calorimeter, the solar neutron track chamber, and the solar neutron decay proton detector. The characteristics of the three methods as to energy range, energy resolution, time resolution, detection efficiency, and physical properties are delineated. Earlier techniques to measure the intensity of high-energy cosmic-ray neutrons at the top of the atmosphere and to search for solar neutrons are described. The past three decades of detector development has now reached the point where it is possible to make comprehensive and detailed measurements of solar neutrons on future space missions.

Frye, Glenn M., Jr.↗
NASA NTRS1989

Probabilistic structural analysis of space propulsion system turbine blades

Probabilistic loads and stress analysis methods are presently applied to the second-stage blade of the SSME's high-pressure fuel turbopump, in order to illustrate how loads and stress responses can be quantified probabilistically and how the sensitivity of such component- and engine-level independent variables as engine inlet temperatures and local seal wear within the turbopump can be determined. Attention is given to a method for the derivation of probabilistic pressure, temperature, and centrifugal steady-state load descriptions of this second-stage blade from the top of the airfoil to its intersection with the firtree. Dependent-load random variables are obtained from a multilevel physical model in which duty cycle-dependent deterministic loads and related probabilistic variations are accounted for.

Newell, J. F.↗
NASA NTRS1991

Discrete ordinate solution of the radiative transfer equation in the 'polarization normal wave representation'

The transfer equations for normal waves in finite, inhomogeneous and plane-parallel magnetoactive media are solved using the discrete ordinate method. The physical process of absorption, emission, and multiple scattering are accounted for, and the medium may be forced both at the top and bottom boundary by anisotropic radiation as well as by internal anisotropic sources. The computational procedure is numerically stable for arbitrarily large optical depths, and the computer time is independent of optical thickness.

Kylling, A.↗
NASA NTRS2003

Learning the ABCs (of Project Management)

To lead a project effectively, one has to establish and maintain the flexibility to take appropriate actions when needed. Overconstrained situations should be avoided. To get on top of matters and stay there, a manager needs to anticipate what it will take to successfully complete the job. Physical and financial resources, personnel, and management structure are all important considerations. Carving out the necessary turf up front can make a world of difference to the project's outcome. After the "what," "where," and "when" of a project are nailed down, the next question is "how" to do the job. When I first interviewed for the job of Science Payload Manager on the Advanced Composition (ACE) Explorer mission, Dr. Edward Stone (ACE Principal Investigator) asked, "Al, give me an idea of your management style." It was a question I had not considered before. I thought about it for a few seconds and then answered, "Well, the first descriptive term that comes to mind is the word "tranquility". That seemed to startle him. So I added, "I guess what I mean is, that if the situation is tranquil and the project is running smoothly, then I've anticipated all the problems and taken necessary actions to head them off." He then asked: "Have you ever reached this state?" "No," I admitted, "but I strive for it." That seemed to satisfy him because I got the job.

Frandsen, Allan↗
NASA NTRS2007

iPhone in NASA Ground Operations

A comprehensive review of the literature and historical background of NASA established a need for an easy-to-implement technological improvement to displaying procedures which is cost effective and risk reducing. Previous unsuccessful attempts have led this team to explore the practicality of using a mobile handheld device. The major products, inputs, resources, constraints, planning and effort required for consideration of this type of solution were outlined. After analyzing the physical, environmental, life-cycle, functional, and socio-technical requirements, a Functional Analysis was performed to describe the top-level, second-level, and third-level functions of the system requirements. In addition, the risk/value proposition of conversion to a new technology was considered and gave a blueprint for transitioning along with the tasks necessary to implement the device into the Vehicle Assembly Building's (VAB) current infrastructure. A Work Breakdown Structure (WBS) described the elemental work items of the implementation. Once the viability of this system was confirmed, a device was selected through use of technical design comparison methods including the Pugh Matrix and House of Quality. Comparison and evaluation of the Apple iPhone, Motorola Q, Blackberry, PC Notebook, and PDA revealed that the iPhone is the most suitable device for this task. This paper outlines the device design/ architecture, as well as some of the required infrastructure.

Benedict, Ashley↗
NASA NTRS2013

Tethered Satellites as an Enabling Platform for Operational Space Weather Monitoring Systems

Tethered satellites offer the potential to be an important enabling technology to support operational space weather monitoring systems. Space weather "nowcasting" and forecasting models rely on assimilation of near-real-time (NRT) space environment data to provide warnings for storm events and deleterious effects on the global societal infrastructure. Typically, these models are initialized by a climatological model to provide "most probable distributions" of environmental parameters as a function of time and space. The process of NRT data assimilation gently pulls the climate model closer toward the observed state (e.g., via Kalman smoothing) for nowcasting, and forecasting is achieved through a set of iterative semi-empirical physics-based forward-prediction calculations. Many challenges are associated with the development of an operational system, from the top-level architecture (e.g., the required space weather observatories to meet the spatial and temporal requirements of these models) down to the individual instruments capable of making the NRT measurements. This study focuses on the latter challenge: we present some examples of how tethered satellites (from 100s of m to 20 km) are uniquely suited to address certain shortfalls in our ability to measure critical environmental parameters necessary to drive these space weather models. Examples include long baseline electric field measurements, magnetized ionospheric conductivity measurements, and the ability to separate temporal from spatial irregularities in environmental parameters. Tethered satellite functional requirements are presented for two examples of space environment observables.

Gilchrist, Brian E.↗
NASA NTRS2022

M2 Selective Laser Melting GRCop-42 Recycling Study

A powder recycling study was conducted to examine the effects of powder reuse on physical and mechanical properties of SLM GRCop-42. Twelve sequential builds were conducted, each reusing powder from the previous build topped off with virgin powder to fill the powder chamber. Powder morphology, particle size distribution, flowability, and chemistry were examined for each subsequent build, along with the mechanical properties of tensile and LCF specimens built with each powder batch. It was found that only powder flowability demonstrated a trend with increasing reuse, with flowability and cohesiveness generally decreasing over the course of the 12 builds. Minor variation in powder chemistry was observed throughout the study, however, the variations did not correlate with increasing powder reuse

Additive Manufacturing↗
NASA NTRS2017

Global Statistics of Microphysical Properties of Cloud-Top Ice Crystals

Ice crystals in clouds are highly complex. Their sizes, macroscale shape (i.e., habit), mesoscale shape (i.e., aspect ratio of components) and microscale shape (i.e., surface roughness) determine optical properties and affect physical properties such as fall speeds, growth rates and aggregation efficiency. Our current understanding on the formation and evolution of ice crystals under various conditions can be considered poor. Commonly, ice crystal size and shape are related to ambient temperature and humidity, but global observational statistics on the variation of ice crystal size and particularly shape have not been available. Here we show results of a project aiming to infer ice crystal size, shape and scattering properties from a combination of MODIS measurements and POLDER-PARASOL multi-angle polarimetry. The shape retrieval procedure infers the mean aspect ratios of components of ice crystals and the mean microscale surface roughness levels, which are quantifiable parameters that mostly affect the scattering properties, in contrast to a habit. We present global statistics on the variation of ice effective radius, component aspect ratio, microscale surface roughness and scattering asymmetry parameter as a function of cloud top temperature, latitude, location, cloud type, season, etc. Generally, with increasing height, sizes decrease, roughness increases, asymmetry parameters decrease and aspect ratios increase towards unity. Some systematic differences are observed for clouds warmer and colder than the homogeneous freezing level. Uncertainties in the retrievals will be discussed. These statistics can be used as observational targets for modeling efforts and to better constrain other satellite remote sensing applications and their uncertainties.

Van Diedenhoven, Bastiaan↗
NASA NTRS1995

Imaging Inhomogeneities From Dry-Coupled Ultrasonic Scans

Method of imaging spatial distribution of selected physical properties and microstructure of specimen of material based on dry-coupled contact ultrasonic pulse/echo scanning. Ultrasonic transducer scanned across top surface of specimen. At each of many positions on two-dimensional grid on top surface, ultrasonic pulse/echo measurements taken and processed. Offers rapid, nondestructive alternative to destructive metallographic sectioning to obtain picture of inhomogeneity of specimen.

Roth, Don J.↗
NASA NTRS2000

Orbital SAR and Ground-Penetrating Radar for Mars: Complementary Tools in the Search for Water

The physical structure and compositional variability of the upper martian crust is poorly understood. Optical and infrared measurements probe at most the top few cm of the surface layer and indicate the presence of layered volcanics and sediments, but it is likely that permafrost, hydrothermal deposits, and transient liquid water pockets occur at depths of meters to kilometers within the crust. An orbital synthetic aperture radar (SAR) can provide constraints on surface roughness, the depth of fine-grained aeolian or volcanic deposits, and the presence of strongly absorbing near-surface deposits such as carbonates. This information is crucial to the successful landing and operation of any rover designed to search for subsurface water. A rover-based ground-penetrating radar (GPR) can reveal layering in the upper crust, the presence of erosional or other subsurface horizons, depth to a permafrost layer, and direct detection of near-surface transient liquid water. We detail here the radar design parameters likely to provide the best information for Mars, based on experience with SAR and GPR in analogous terrestrial or planetary environments.

Campbell, B. A.↗
NASA NTRS2004

A New View of Mars

During the last 8 years the US has successfully sent 2 major spacecraft to Mars 1z?der= planet. The Mars Global Surveyor spacecraft (IGS), which started operating at Mars in Sept 1977 and Mars Odyssey spacecraft that started operating in Jan 2002, are both operational and collecting data, including 1.5 meter pixel imagery, them spectrometry, magnetometry, altimeter/radiometry, gamma ray and neutron counts. imaging spectrometry, and gravity. The two orbiters are conceptually similar to Earth orbiting spacecraft in that their primary purpose is to observe, monitor, and measure a variety of parameters about the planet and report any changes that might be occurring on the surfaces and in the atmosphere. As a result we now have detailed physical descriptions of the shape, topography, magnetism. surface roughness, thermal inertia, atmospheric pressure and temperature, the distribution of hydrogen in the top meter of the crust, models for the planetary interior based upon data, and an image set that portrays much of the history of the past 3 billion years. understand how the planet came to be this way.

Smith, David E.↗
NASA NTRS2021

Transient Effects in Atmosphere and Ionosphere Preceding the 2015 M7.8 and M7.3 Gorkha–Nepal Earthquakes

We analyze retrospectively/prospectively the transient variations of six different physical parameters in the atmosphere/ionosphere during the M7.8 and M7.3 earthquakes in Nepal, namely: 1) outgoing longwave radiation (OLR) at the top of the atmosphere (TOA); 2) GPS/TEC; 3) the very-low-frequency (VLF/LF) signals at the receiving stations in Bishkek (Kyrgyzstan) and Varanasi (India); 4) Radon observations; 5) Atmospheric chemical potential from assimilation models; and; 6) Air Temperature from NOAA ground stations. We found that in mid-March 2015, there was a rapid increase in the radiation from the atmosphere observed by satellites. This anomaly was located close to the future M7.8 epicenter and reached a maximum on April 21–22. The GPS/TEC data analysis indicated an increase and variation in electron density, reaching a maximum value during April 22–24. A strong negative TEC anomaly in the crest of EIA (Equatorial Ionospheric Anomaly) occurred on April 21, and a strong positive anomaly was recorded on April 24, 2015. The behavior of VLF-LF waves along NWC-Bishkek and JJY-Varanasi paths has shown abnormal behavior during April 21–23, several days before the first, stronger earthquake. Our continuous satellite OLR analysis revealed this new strong anomaly on May 3, which was why we anticipated another major event in the area. On May 12, 2015, an M7.3 earthquake occurred. Our results show coherence between the appearance of these pre-earthquake transient’s effects in the atmosphere and ionosphere (with a short time-lag, from hours up to a few days) and the occurrence of the 2015 M7.8 and M7.3 events. The spatial characteristics of the pre-earthquake anomalies were associated with a large area but inside the preparation region estimated by Dobrovolsky-Bowman. The preearthquake nature of the signals in the atmosphere and ionosphere was revealed by simultaneous analysis of satellite, GPS/TEC, and VLF/LF and suggest that they follow a general temporal-spatial evolution pattern that has been seen in other large earthquakes worldwide

Dimitar Ouzounov↗
NASA NTRS2011

Eagleworks Laboratories: Advanced Propulsion Physics Research

NASA/JSC is implementing an advanced propulsion physics laboratory, informally known as "Eagleworks", to pursue propulsion technologies necessary to enable human exploration of the solar system over the next 50 years, and enabling interstellar spaceflight by the end of the century. This work directly supports the "Breakthrough Propulsion" objectives detailed in the NASA OCT TA02 In-space Propulsion Roadmap, and aligns with the #10 Top Technical Challenge identified in the report. Since the work being pursued by this laboratory is applied scientific research in the areas of the quantum vacuum, gravitation, nature of space-time, and other fundamental physical phenomenon, high fidelity testing facilities are needed. The lab will first implement a low-thrust torsion pendulum (<1 uN), and commission the facility with an existing Quantum Vacuum Plasma Thruster. To date, the QVPT line of research has produced data suggesting very high specific impulse coupled with high specific force. If the physics and engineering models can be explored and understood in the lab to allow scaling to power levels pertinent for human spaceflight, 400kW SEP human missions to Mars may become a possibility, and at power levels of 2MW, 1-year transit to Neptune may also be possible. Additionally, the lab is implementing a warp field interferometer that will be able to measure spacetime disturbances down to 150nm. Recent work published by White [1] [2] [3] suggests that it may be possible to engineer spacetime creating conditions similar to what drives the expansion of the cosmos. Although the expected magnitude of the effect would be tiny, it may be a "Chicago pile" moment for this area of physics.

White, Harold↗
NASA NTRS1976

Work function determination of promising electrode materials for thermionic energy converters

The work function determinations of candidate materials for low temperature (1400 K) thermionics through vacuum emission tests are discussed. Two systems, a vacuum emission test vehicle and a thermionic emission microscope are used for emission measurements. Some nickel and cobalt based super alloys were preliminarily examined. High temperature physical properties and corrosion behavior of some super alloy candidates are presented. The corrosion behavior of sodium is of particular interest since topping cycles might use sodium heat transfer loops. A Marchuk tube was designed for plasma discharge studies with the carbide and possibly some super alloy samples. A series of metal carbides and other alloys were fabricated and tested in a special high temperature mass spectrometer. This information coupled with work function determinations was evaluated in an attempt to learn how electron bonding occurs in transition alloys.

Jacobson, D.↗
NASA NTRS1979

Hydrodynamic simulations of flare/surge events

A one-dimensional, hydrodynamic, time-dependent model which simulates the major observed dynamics of flare associated surges was developed. The thermodynamics, the surge mass, the time scales, the physical dimensions, and the velocities of typical surge events are reproduced. The surge is created by a sudden pressure increase at the top of the chromosphere, and this pressure pulse produces a disturbance which is followed, with a time-dependent numerical solution, as it propagates upward through the transition region and into the corona. The leading edge of the disturbance is a weak shock which has only a slight effect on the original transition region and coronal thermodynamics. The major effect occurs behind the shock where the temperature is decreased and the density is increased, and this cool, dense region moves upward then falls downward. After the material begins returning to the chromosphere, a second shock is formed which propagates upward, brings the infalling material to rest, and returns the atmosphere to hydrostatic equilibrium.

Steinolfson, R. S.↗
NASA NTRS1982

Determination of the horizontal and vertical distribution of clouds from infrared satellite sounding data

A numerical algorithm, based on a physical inversion of the radiative transfer equation, is developed to retrieve the global distribution of the horizontal cloud cover, the cloud-top pressure levels and their temperature. The algorithm makes use of infrared and microwave temperature sounding data to derive the clear-column vertical temperature profiles and then uses the same infrared sounding data to obtain the corresponding cloud parameters. Experimental verification of this method is carried out using data from the High resolution Infrared Sounder (HIRS) and the Microwave Sounding Unit (MSU) operating on the NOAA weather satellite system.

Chahine, M. T.↗
NASA NTRS1990

Regional earth-atmosphere energy balance estimates based on assimilations with a GCM

The Oort and Vonder Haar (1976) column-budget technique is presently used to evaluate the physical consistency and accuracy of regional earth-atmosphere energy balance estimates for (1) atmospheric budget terms, (2) net radiation at the top of the atmosphere, and (3) time tendency and flux divergence of energy, for Special Observing Periods of the FGGE year. It is found that, during winter, the midlatitude oceans supply large quantities of energy to the overlying atmosphere, which then transports the energy to the continental heat-sinks; the energy flows in the opposite direction during summer.

Alexander, Michael A.↗
NASA NTRS2016

Experimental Technique for Producing and Recording Precise Particle Impacts on Transparent Window Materials

A new facility for making small particle impacts is being developed at NASA. Current sand/particle impact facilities are an erosion test and do not precisely measure and document the size and velocity of each of the impacting particles. In addition, evidence of individual impacts is often obscured by subsequent impacts. This facility will allow the number, size, and velocity of each particle to be measured and adjusted. It will also be possible to determine which particle produced damage at a given location on the target. The particle size and velocity will be measured by high speed imaging techniques. Information as to the extent of damage and debris from impacts will also be recorded. It will be possible to track these secondary particles, measuring size and velocity. It is anticipated that this additional degree of detail will provide input for erosion models and also help determine the impact physics of the erosion process. Particle impacts will be recorded at 90 degrees to the particle flight path and also from the top looking through the target window material.

Gray, Perry↗