Search NASA⌕ Search

SEARCH · Search NASA

Results for “total variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Variations of total ozone in the north polar region as seen by TOMS

Data from the TOMS instrument has been used to follow the course of development of the Antarctic ozone springtime minimum since 1979. Addressed is the question of possible north polar region changes which might be deduced from the nine years of TOMS measurements of total ozone. Total ozone is a much more variable quantity in the Northern Hemisphere than in the Southern Hemisphere. This makes the search for trends more difficult and the interpretation of results more uncertain. The 9-yr time series of TOMS data at high latitudes in the Northern Hemisphere is examined. Because the TOMS measurements have drifted by 3 to 4 percent with respect to closely collocated Dobson measurements, it was chosen in this study to adopt the Dobson normalization and adjust the TOMS measurements accordingly. The difference between the last two years (1986 and 1987) of the TOMS record, and the first two years of the record (1979 and 1980) are shown. The difference in percent is given as a function of latitude and time of year. The Antarctic springtime decrease is clearly seen as well as a smaller change which extends to about 50 degrees south latitude at all seasons. Changes in the Northern Hemisphere are less dramatic and are concentrated near the polar night where solar zenith angles are very large. These data are now being examined in more detail and updated results will be presented at the Workshop.

Stolarski, Richard S.↗

The QBO and interannual variation in total ozone

Garcia and Soloman (1987) have noted that the October monthly mean minimum total ozone amounts south of 30 S were modulated by a quasibiennial oscillation (QBO) signal. The precise mechanism behind this effect, however, is unclear. Is the modulation brought about by the circulation-produced QBO signal in the ozone concentration itself, or does the temperature QBO modulate the formation of polar stratospheric clouds (PSCs), leading to changes in the chemically induced Antarctic spring ozone decline rate. Or is some other phenomenon involved. To investigate the means through which the QBO effect occurs, a series of correlation studies has been made between polar ozone and QBO signal in ozone and temperature.

Lait, Leslie R.↗

Two-parameter model of total solar irradiance variation over the solar cycle

Total solar irradiance measured by the SMM/ACRIM radiometer is modelled from the Photometric Sunspot Index and the Mg II core-to-wing ratio with multiple regression analysis. Considering that the formation of the Mg II line is very similar to that of the Ca II K line, the Mg II core-to-wing ratio, measured by the Nimbus-7 and NOAA9 satellites, is used as a proxy for the bright magnetic elements, including faculae and the magnetic network. It is shown that the relationship between the variations in total solar irradiance and the above solar activity indices depends upon the phase of the solar cycle. Thus, a better fit between total irradiance and its model estimates can be achieved if the irradiance models are calculated for the declining portion and minimum of solar cycle 21, and the rising portion of solar cycle 22, respectively. There is an indication that during the rising portion of solar cycle 22, similar to the maximum time of solar cycle 21, the modelled total irradiance values underestimate the measured values. This suggests that there is an asymmetry in the long-term total irradiance variability.

Pap, Judit M.↗

Primitive Xe in the atmospheres of Earth and mars

Published data on Xe isotope compositions in primitive carbonaceous meteorites are examined using multidimensional correlation analysis. Distribution of the Xe data in multidimensional data space, except for (129)Xe, can be characterized by a single component, whose isotope composition is identical to 'H plus L minus Xe'. Additional small contributions to the data variations, less than 1 percent of total variations, can be attributed to 'S minus Xe' as well as atmospheric contamination. Isotopic composition of primitive Xe common to the Earth's atmosphere and carbonaceous meteorites are determined with the same assumption as adopted by Pepin and Phinney: primitive Xe is precisely related to fission-free Xe in the Earth's atmosphere by mass fractionation. The determined isotopic composition of primitive Xe is closer to Solar-type Xe, rather than U-Xe (and the primitive Xe estimated from chondrite-achondrite correlation. Hence, the present published data on Xe isotope compositions in meteorites do not seem to require any special component for the primitive Xe common to the Earth's atmosphere and carbonaceous meteorites. Thus Earth's accreting planetesimals would have trapped Xe from the surrounding nebula gases where Xe isotope composition is identical to Solar-type Xe. The trapped Xe was subsequently subject to isotopic fractionation due to gravitational separation as planetesimals grew. Finally fissiogenic Xe from (244)Pu was added to form the present Xe isotope composition of the Earth's atmosphere. The amount of fissiogenic (136)Xe is estimated to be 2.6 percent of the total amount of (136)Xe in the atmosphere, which is about a half of that estimated by Pepin and Phinney (4.65 percent).

Igarashi, G.↗

Sparse Recovery for Scientific Data

We have built build and analyzed fundamental mathematical tools that enable sparse recovery of scientific data for high performance computing, experimental facilities and sensor measurement. The proposed work will impact many areas of research across the DOE. We have designed, developed and analyzed fast scalable algorithms for the sparse recovery of scientific data sets that may be extremely large, generated very quickly and distributed across multiple storage devices. The algorithms we developed will be used to process the copious amounts of scientific data generated by the DOE supercomputer simulations and by DOE experimental and observational facilities. They leverage the fact that while the amount of data produced can be extremely large, the actual quantities of interest (QoI's) are often sparse, either in space time, or in some feature space. Mathematically, notions of compressive sensing, including l1 regularized and total variation regularized optimization have played an important part in this effort.

97 MATHEMATICS AND COMPUTING↗

Sampling-based Uncertainty Quantification in Deconvolution of X-ray Radiographs

In imaging applications that focus on quantitative analysis{such as X-ray radiography in the security sciences--it is necessary to be able to reliably estimate the uncertainties in the processing algorithms applied to the image data, and deconvolving the system blur out of the image is usually an essential step. In this work we solve the deconvolution problem within a Bayesian framework for edge-enhancing reconstruction with uncertainty quantification. The likelihood is a normal approximation to the Poisson likelihood, and the prior is generated from a classical total variation regularized Poisson deconvolution. Samples from the corresponding posterior distribution are computed using a Markov chain Monte Carlo approach, giving a pointwise measure of uncertainty in the final, deconvolved signal. We demonstrate the results on real data used to calibrate a high-energy X-ray source and show that this approach gives reconstructions as good as classical regularization methods, while mitigating many of their drawbacks.

Deconvolution, Inverse Problems, Markov Chain Mont↗

Stability analysis of the Eulerian–Lagrangian finite volume methods for nonlinear hyperbolic equations in one space dimension

In this paper, we construct a novel Eulerian–Lagrangian finite volume (ELFV) method for nonlinear scalar hyperbolic equations in one space dimension. It is well known that the exact solutions to such problems may contain shocks though the initial conditions are smooth, and direct numerical methods may suffer from restricted time step sizes. To relieve the restriction, we propose an ELFV method, where the space-time domain was separated by the partition lines originated from the cell interfaces whose slopes are obtained following the Rakine–Hugoniot junmp condition. Unfortunately, to avoid the intersection of the partition lines, the time step sizes are still limited. To fix this gap, we detect effective troubled cells (ETCs) and carefully design the influence region of each ETC, within which the partitioned space-time regions are merged together to form a new one. Then with the new partition of the space-time domain, we theoretically prove that the proposed first-order scheme with Euler forward time discretization is total-variation-diminishing and maximum-principle-preserving with at least twice larger time step constraints than the classical first order Eulerian method for Burgers’ equation. Numerical experiments verify the optimality of the designed time step sizes.

97 MATHEMATICS AND COMPUTING↗

Improved multislope MUSCL reconstruction on unstructured grids for shallow water equations

In shallow water flow and transport modeling, the monotonic upstream-centered scheme for conservation laws (MUSCL) is widely used to extend the original Godunov scheme to second-order accuracy. The most important step in MUSCL-type schemes is MUSCL reconstruction, which calculate-extrapolates the values of independent variables from the cell center to the edge. The monotonicity of the scheme is preserved with the help of slope limiters that prevent the occurrence of new extrema during reconstruction. On structured grids, the calculation of the slope is straightforward and usually based on a 2-point stencil that uses the cell centers of the neighbor cell and the so-called far-neighbor cell of the edge under consideration. On unstructured grids, the correct choice for the upwind slope becomes nontrivial. 2 novel total variation diminishing schemes are developed based on different techniques for calculating the upwind slope and the downwind slope. An additional treatment that stabilizes the scheme is discussed. The proposed techniques are compared to 2 existing MUSCL reconstruction techniques, and a detailed discussion of the results is given. Finally, it is shown that the proposed MUSCL reconstruction schemes obtain more accurate results with less numerical diffusion and higher efficiency.

54 ENVIRONMENTAL SCIENCES↗

Numerical fluid dynamics for FRG flow equations: Zero-dimensional QFTs as numerical test cases. II. Entropy production and irreversibility of RG flows

Herein we demonstrate that the reformulation of renormalization group (RG) flow equations as nonlinear heat equations has severe implications on the understanding of RG flows in general. We demonstrate by explicitly constructing an entropy function for a zero-dimensional Z 2 -symmetric model that the dissipative character of generic nonlinear diffusion equations is also hard-coded in the functional RG equation. This renders RG flows manifestly irreversible, revealing the semigroup property of RG transformations on the level of the flow equation itself. Additionally, we argue that the dissipative character of RG flows, its irreversibility and the entropy production during the RG flow may be linked to the existence of a so-called C– / A-function. In total, this introduces an asymmetry in the so-called RG time—in complete analogy to the thermodynamic arrow of time—and allows for an interpretation of infrared actions as equilibrium solutions of dissipative RG flows equations. The impossibility of resolving microphysics from macrophysics is evident in this framework. Furthermore, we directly link the irreversibility and the entropy production in RG flows to an explicit numerical entropy production, which is manifest in diffusive and non-linear partial differential equations (PDEs) and a standard mathematical tool for the analysis of PDEs. Using exactly solvable zero-dimensional Z 2 -symmetric models, we explicitly compute the (numerical) entropy production related to the total variation nonincreasing property of the PDE during RG flows toward the infrared limit. Finally, we discuss generalizations of our findings and relations to the C– / A-theorem as well as how our work may help to construct truncations of RG flow equations in the future, including numerically stable schemes for solving the corresponding PDEs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Anisotropic seismic-waveform inversion: Application to a seismic velocity model from Eleven-Mile Canyon in Nevada

Accurate imaging and characterization of fracture zones is crucial for geothermal energy exploration. Aligned fractures within fracture zones behave as anisotropic media for seismic-wave propagation. The anisotropic properties in fracture zones introduce extra difficulties for seismic imaging and waveform inversion. We have recently developed a new anisotropic elastic-waveform inversion method using a modified total-variation regularization scheme and a wave-energy-base preconditioning technique. Our new inversion method uses the parameterization of elasticity constants to describe anisotropic media, and hence it can properly handle arbitrary anisotropy. We apply our new inversion method to a seismic velocity model along a 2D-line seismic data acquired at Eleven-Mile Canyon located at the Southern Dixie Valley in Nevada for geothermal energy exploration. Our inversion results show that anisotropic elastic-waveform inversion has potential to reconstruct subsurface anisotropic elastic parameters for imaging and characterization of fracture zones.

15 GEOTHERMAL ENERGY↗

Iterative Reconstruction for Multimodal Neutron Tomography

Here, we describe a unified framework for model-based iterative 3-D reconstruction of multimodal neutron transmission, hydrogen-scatter, and induced-fission images from low resolution data recorded using 14.1-MeV neutrons and the associated-particle imaging (API) technique. The framework, which was developed to facilitate use in challenging field-deployment scenarios, is centered around physics-based system models and a total variation (TV) constrained implementation of the simultaneous iterative reconstruction technique (SIRT). Modified to solve a statistically weighted least squares (WLS) problem, the SIRT algorithm is accelerated using ordered subsets and Nesterov’s momentum for which we derive a near-optimal value of the governing Lipschitz constant. The approach enables the reconstruction of images that are high resolution compared to the acquired data and is robust to both limited statistics and a limited number of projection angles. Moreover, the framework is fast enough to be practical. Example images are provided that demonstrate both the ability to perform fast-neutron imaging of high-atomic-number materials with low radiation dose and the benefit of multimodal neutron imaging to identify key materials.

Hydrogen scatter↗

Motion of the termination shock in response to an 11 year variation in the solar wind

A two-dimensional hydrodynamic numerical model was used to study the motion of the termination shock in response to an 11 year variation in the solar wind ram pression. For a total variation in the ram pressue by a factor of 2, a termination shock at 89 AU was found to move inward and outward about +/- 8% of its distance with a typical velocity of 12 km/sec. This movement may be understood in terms of the various time scales associated with the response of the termination shock and heliopause to variations in the solar wind ram pressure.

Karmesin, S. Roy↗

Motion of the Termination Shock in Response to an 11 Year Variation in the Solar Wind

A two-dimensional hydrodynamic numerical model has been used to study the motion of the termination shock in response to an 11 year variation in the solar wind ram pressure. For a total variation in the ram pressure by a factor of 2, a termination shock at 89 AU moves inward and outward about +/- 8 percent of its distance with a typical velocity of 12 km/s.

solar↗

TU-CD-BRA-12: Coupling PET Image Restoration and Segmentation Using Variational Method with Multiple Regularizations

Purpose: To propose a new variational method which couples image restoration with tumor segmentation for PET images using multiple regularizations. Methods: Partial volume effect (PVE) is a major degrading factor impacting tumor segmentation accuracy in PET imaging. The existing segmentation methods usually need to take prior calibrations to compensate PVE and they are highly system-dependent. Taking into account that image restoration and segmentation can promote each other and they are tightly coupled, we proposed a variational method to solve the two problems together. Our method integrated total variation (TV) semi-blind deconvolution and Mumford-Shah (MS) segmentation. The TV norm was used on edges to protect the edge information, and the L{sub 2} norm was used to avoid staircase effect in the no-edge area. The blur kernel was constrained to the Gaussian model parameterized by its variance and we assumed that the variances in the X-Y and Z directions are different. The energy functional was iteratively optimized by an alternate minimization algorithm. Segmentation performance was tested on eleven patients with non-Hodgkin’s lymphoma, and evaluated by Dice similarity index (DSI) and classification error (CE). For comparison, seven other widely used methods were also tested and evaluated. Results: The combination of TV and L{sub 2} regularizations effectively improved the segmentation accuracy. The average DSI increased by around 0.1 than using either the TV or the L{sub 2} norm. The proposed method was obviously superior to other tested methods. It has an average DSI and CE of 0.80 and 0.41, while the FCM method — the second best one — has only an average DSI and CE of 0.66 and 0.64. Conclusion: Coupling image restoration and segmentation can handle PVE and thus improves tumor segmentation accuracy in PET. Alternate use of TV and L2 regularizations can further improve the performance of the algorithm. This work was supported in part by National Natural Science Foundation of China (NNSFC), under Grant No.61375018, and Fundamental Research Funds for the Central Universities, under Grant No. 2012QN086. Wei Lu was supported in part by the National Institutes of Health (NIH) Grant No. R01 CA172638.

60 APPLIED LIFE SCIENCES↗

Validation of CERES Flight Model 5 In-Orbit Calibrations Using Lunar Observations

Scientific studies require radiation fluxes over the Earth to be accurate within 1% for shortwave fluxes and 0.5% for outgoing longwave fluxes. The validation of in-orbit instrument performance requires both stability in calibration source and also calibration corrections to compensate for instrument changes. The Moon offers an external source whose signal variance is predictable and non-degrading. CERES detectors register the signal output from the entire face of the Moon. Lunar observations performed by CERES Flight Models (FM) 1 through 4 have been successful in assisting validation of radiances to the required accuracy. CERES Flight Model 5 (FM-5) is on Suomi/NPP spacecraft, orbiting since October 2011. This paper uses lunar measurements to validate detector output of FM-5. These measurements are adjusted to remove orbital effects due to variations in distance between Moon and Sun, distance between the satellite and the Moon and lunar phase angle. These effects create a total variation in lunar irradiance of 20% in the total channel and 8% in the shortwave channel. The change in orientation of the Moon as seen by the detector is called libration and causes variations of about 1% of the irradiance. A consistent dataset spanning at least 2 years in length is required to remove variations due to libration. The major uncertainties remaining in the measurements are assumed to be due to changes of the spectral responses of the channels due to degradation of optical surfaces in orbit. The results demonstrate that lunar observations can be used to validate FM-5 measurements.

Clouds and Earth Radiant Energy System↗