Search NASA⌕ Search

SEARCH · Search NASA

Results for “toughness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

3D printable silicone compositions exhibiting high toughness and low durometer

3D printable silicones can be designed with varying crosslink density, network structures, and types of reinforcing additives. Within this design space, one may tailor the uncured material’s rheology and mechanical response to access a wide range of potential applications. However, printable, low modulus silicones, particularly those applicable to direct ink write, are underreported in published literature. To address the need for higher performance, low modulus silicones with demonstrated printability, a new set of ca. 20–50 Shore A hardness silicone elastomers exhibiting ca. 7 MPa ultimate tensile strength and ca. 400–1200% elongation at break is presented. Mechanical properties were analyzed, providing insight to the effects of formulation constituents on mechanical properties. Cyclic mechanical testing of the silicone formulations was also performed, and the energy loss and permanent set throughout cycling were determined. In conclusion, printed structures demonstrate the feasibility of these new silicones as durable frameworks for novel soft device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High Toughness Cermets for Molten Salt Pumps

Concentrated Solar Power plants using nitrate salts used cantilevered pump designs to avoid use of bearings in the 565°C salt; however, this necessitated the use of a sump that added additional cost, complexity, and thermal losses. Sump systems had their own complications, including risk of flooding the sump due to control issues either with level indicators or failures in the control valve responsible for filling the sump. Long-shafted pumps were developed and tested, and they outline the need to develop journal sleeves and bearings for new salt systems. Based on reports, pumps will need to be a vertical single- or multi-stage type, mounted to the roof of the molten salt tanks. Design and service for molten salt pumps above 550°C is relatively limited, and at temperatures up to 750°C there is no available design or service experience. Long-shaft pumps that extend to the bottom of the thermal energy storage tank will require bearing materials that are suitable to the given salt chemistry. Lubricity of proposed salts is unclear and need to be determined, especially for cold-tank pumps that require multi-stages for lifting the salt to the top of the tower. Materials, design, and maintenance are all major unknowns.

14 SOLAR ENERGY↗
DOE OSTI2021

Fracture Toughness and Fatigue Crack Growth Rate Testing of Baffle-Former Bolts Harvested from a Westinghouse Two-Loop Downflow Type PWR

As one of the pressurized water reactor (PWR) internal components, baffle-former bolts (BFBs) are subjected to significant mechanical stress and neutron irradiation from the reactor core during the plant operation. Over the long operation period, these conditions lead to potential degradation and reduced load-carrying capacity of the bolts. In support of evaluating long-term operational performance of materials used in core internal components, the Oak Ridge National Laboratory (ORNL), through the Department of Energy (DOE), Light Water Reactor Sustainability (LWRS) Program, Materials Research Pathway (MRP) has harvested two high fluence BFBs from a commercial Westinghouse two-loop downflow type PWR. The two bolts of interest, i.e. bolts # 4412 and 4416, were withdrawn from service in 2011 as part of a preventative replacement plan. No identification of cracking or potential damage was found for these bolts during their removal in 2011. However, the bolts required a lower torque for removal from the baffle structure than the original torque specified during installation. Irradiation displacement damage levels in the bolts range from 15 to 41 displacements per atom. The goal of this project is to perform detailed microstructural and mechanical property characterization of BFBs following in-service exposures. The information from these bolts will be integral to the LWRS program initiatives in evaluating end of life microstructure and properties. Furthermore, valuable data will be obtained that can be incorporated into model predictions of long-term irradiation behavior and compared to results obtained in high flux experimental reactor conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Self-Healing Cements with Improved Toughness at Casing and Formation Interfaces for Subsurface Applications

The goal of this project (developed for Topic 2) is to demonstrate that PNNL’s self-healing cement (US Patent 20180044570A1) is a superior well construction material compared to conventional cement and to accelerate its commercial adoption. The project also enables a pathway toward a rigorous and reproducible EGS development approach that can be extended to high-temperature unconventional oil and gas reservoirs as well as low temperature carbon storage reservoirs. To achieve this goal, the project’s objectives are to answer remaining technical questions and to address identified technical and market barriers. This project involves collaboration between PNNL, ARE, Cyrq Energy (under the auspices of ARE), and RC. This team demonstrates a strong technical partnership, linking theoretical and laboratory expertise with field-based geothermal resource management and well completions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Furthering Advancement to Address Tough Problems Facing the Solar Energy Industry, Spurring the Next Wave of Solar Technology Innovations through Three Progressive Challenges and Cash Incentives (Final Report)

The American-Made Solar Prize is a prize competition from the U.S. Department of Energy that is designed to revitalize U.S. solar manufacturing. The competition aims to support the growth of U.S. solar manufacturing and reenergize American energy innovation by tapping into American's competitive spirit and the nation's unparalleled innovation ecosystem leveraging national labs, incubators, facilities and more. National Renewable Energy Lab (NREL) will provide technical and business advisement to the noted Solar Prize finalists. The CRADA Participant is in the process of developing a new continuous process for making silicon wafers for solar cells in a novel approach to horizontal ribbon growth. Under this CRADA, NREL will characterize the chemical, electrical, and crystallographic properties of the as-produced wafers to and work with the CRADA Participant to improve and modify processing conditions.

14 SOLAR ENERGY↗
DOE OSTI2024

Tough Break: Many Factors Make Glass Breakage More Likely

We have seen cases of glass in PV modules breaking differently, and more often, than it did five years ago. There have been many changes to PV module design and materials in that time. But there is probably no single change that is responsible for the problem. Here we summarize the current thinking on PV glass breakage in utility-scale power plants. We share insights from multiple still-running projects at NREL.

14 SOLAR ENERGY↗
DOE OSTI2025

Tough Errors Are no Match (TEAM): Optimizing the quantum compiler for noise resilience

This report summarizes Unitary Fund’s contributions to the Department of Energy’s TEAM project (DE-SC0020266) under Thrust 2: Quantum Programming and Compilation. The central outcomes of this work have been the development of Mitiq, an open-source Python toolkit for applying quantum error mitigation (QEM) techniques to noisy quantum programs, and the invention, benchmarking and theoretical investigation of novel QEM techniques. Additional outcomes include the development of other open source software packages for the usage, simulation and control of quantum computers.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Tough Errors are no Match (TEAM): Optimizing the Quantum Compiler for Noise Resilience

This project builds toward a comprehensive error-mitigating toolkit that makes quantum programming more robust and adaptive to the noisy, resource-limited nature of today’s quantum hardware. To that end, it integrates established error-mitigation methods — such as zero-noise extrapolation and dynamical decoupling — directly into compiler infrastructures. These techniques will be packaged as modules that can automatically adjust and combine based on performance analysis, enabling compilers to explore large design spaces and produce optimized, low-noise quantum programs with minimal manual intervention. In parallel, this project also explores new approaches to analog quantum programming or quantum simulation, and has developed the programming language SimuQ which treats quantum Hamiltonian evolution as the central object.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Self-Healing Cements with Improved Toughness at Casing and Formation Interfaces for Subsurface Applications (CRADA 530)

Over the three-year CRADA, Pacific Northwest National Laboratory (PNNL) advanced a new class of Molecular Velcro™ self-healing wellbore cements designed to improve the long-term integrity of wells used for geothermal energy production and carbon storage. Conventional wellbore cement can crack due to repeated mechanical loading, temperature swings, and exposure to aggressive subsurface fluids. Once cracks form, they can create leakage pathways, drive expensive remediation (“workovers”), and in extreme cases shorten well life. This project addressed that problem by developing polymer-modified cement systems that can autonomously re-seal cracks and better tolerate the extreme conditions experienced in subsurface wells, while remaining compatible with practical cementing operations.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Alloy Partitioning Effect on Strength and Toughness of κ-Carbide Strengthened Steels

Alloy partitioning during heat treatment in a lightweight precipitation hardened steel was investigated using transmission electron microscopy and atom probe tomography. The mechanical properties are discussed as a function of the effect of solution treatment temperature and aging time, giving rise to variations in chemical modulation. A wrought lightweight steel alloy with a nominal composition of Fe-30Mn-9Al-1Si-1C-0.5Mo (wt. %) was solution-treated between 1173–1273 K and aged at 773 K. Lower solution treatment temperatures retained a finer grain size and accelerated age hardening response that also produced an improved work hardening behavior with a tensile strength of -1460 MPa at 0.4 true strain. Atom probe tomography indicated these conditions also had reduced modulation in the Si and Al content due to the reduced aging time preventing silicon from diffusing out of the κ-carbide into the austenite. This work provides the framework for heat-treating lightweight, age hardenable steels with high strength and improved energy absorption.

36 MATERIALS SCIENCE↗