SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A statistically-based comparison of aircraft times of arrival between Center/TRACON Automation System (CTAS) air traffic control scheduling and airline predictions is presented. CTAS is found to provide much improved values, forming the foundation for airline operational improvements, as observed during an airline field trial of a CTAS display.
The emergence of new aerial vehicles into the National Airspace System creates an increased demand for aeronautical communications to support aviation operations. However, the issue of spectrum scarcity remains an ever-present concern, and the growing demand cannot be supported using existing spectrum allocation strategies. As a result, a new spectrum management approach is required, and the National Aeronautics and Space Administration (NASA) is investigating advanced concepts to modernize the management and use of aviation spectrum by leveraging the latest advancements in wireless communications, big data and machine learning. This research proposes an autonomous spectrum allocation concept, which allocates communications resources, such as spectrum and power, based on the predicted communications and air traffic demands throughout the airspace, as opposed to the use of fixed allocations as is done today. This approach will result in improved spectrum utilization efficiency and enhanced airspace capacity. The autonomous spectrum allocation concept decomposes into three research areas: demand prediction, resource allocation, and use case evaluation. As part of the use case evaluation effort, a modeling and simulation capability is currently under development. This simulation capability includes the implementation of various features, including visualization of both live or virtually-generated airspace traffic, simulation scenario development, simulation management with data collection, and flight plan creation with corresponding trajectory generation. This modeling and simulation capability will continue to evolve as new and advanced airspace applications are introduced into existing and emerging operational environments.
This document presents an operational Concept of Use (ConUse) for the Phase 1 Baseline Integrated Arrival, Departure, and Surface (IADS) prototype system of NASA's Airspace Technology Demonstration 2 (ATD-2) sub-project, which began demonstration in 2017 at Charlotte Douglas International Airport (CLT). NASA is developing the IADS system under the ATD-2 sub-project in coordination with the Federal Aviation Administration (FAA) and aviation industry partners. The primary goal of ATD-2 sub-project is to improve the predictability and the operational efficiency of the air traffic system in metroplex environments, through the enhancement, development, and integration of the nation's most advanced and sophisticated arrival, departure, and surface prediction, scheduling, and management systems. The ATD-2 effort is a five-year research activity through 2020. The initial phase of the ATD-2 sub-project, which is the focus of this document, will demonstrate the Phase 1 Baseline IADS capability at CLT in 2017. The Phase 1 Baseline IADS capabilities of the ATD-2 sub-project consists of: (a) Strategic and tactical surface scheduling to improve efficiency and predictability of airport surface operations, (b) Tactical departure scheduling to enhance merging of departures into overhead traffic streams via accurate predictions of takeoff times and automated coordination between the Airport Traffic Control Tower (ATCT, or Tower) and the Air Route Traffic Control Center (ARTCC, or Center), (c) Improvements in departure surface demand predictions in Time Based Flow Management (TBFM), (d) A prototype Electronic Flight Data (EFD) system provided by the FAA via the Terminal Flight Data Manager (TFDM) early implementation effort, and (e) Improved situational awareness and demand predictions through integration with the Traffic Flow Management System (TFMS), TBFM, and TFDM (3Ts) for electronic data integration and exchange, and an on-screen dashboard displaying pertinent analytics in real-time. The surface scheduling and metering element of the capability is consistent with the Surface CDM Concept of Operations published in 2014 by the FAA Surface Operations Directorate.1 Upon successful demonstration of the Phase 1 Baseline IADS capability, follow-on demonstrations of the matured IADS traffic management capabilities will be conducted in the 2018-2020 timeframe. At the end of each phase of the demonstrations, NASA will transfer the ATD-2 sub-project technology to the FAA and industry partners.
Freeway crash prediction models are the basic of traffic safety research, yet crash occurrence and the influencing factors change over time. In order to make sure the implemented safety models fit the current traffic environment, this study conducts a comparative analysis of 2017 and 2020 datasets collected from freeways in Suzhou, China. Herein, considering the spatial correlation among analysis units and the hierarchical data structure, a Bayesian conditional autoregressive negative binomial (CAR-NB) model and a Bayesian hierarchical CAR-NB (HCAR-NB) model were used to explore the safety influencing factors, and a traditional NB model was developed for further comparison. To update the HCAR-NB model from 2017 to 2020, Bayesian inference with informative priors was used to improve its goodness of fit and efficiency. Preliminary results showed that 1) the HCAR-NB model outperformed the NB model and CAR-NB model in prediction accuracy, and 2) the number of crashes was significantly correlated with average speed, speed variance, road segment length, number of lanes, and presence of ramps. The potential for safety improvement (PSI) method was applied to the modeling results to identify hotspots for the two years. The results confirmed that the hotspots spatiotemporally shifted among the freeways. The proposed crash prediction model and updating method are expected to assist implementation of informed countermeasures for freeway safety improvement.
Inaccurate prediction of aircraft trajectory by ground-based decision support tools (DST) is a major concern in air traffic management (ATM). Aircraft trajectory prediction tools rely on a simplified point-mass aircraft performance model (APM) to make their predictions. Even though the performance coefficients and weight of an aircraft are a vital part of the APM’s predictions and accuracy, these coefficients are proprietary in nature and therefore, unavailable to DSTs. Current ATM research focuses on improving the estimate of some APM parameters by freezing all other coefficients. This simplified approach introduces unwanted sources of bias and negatively impacts the accuracy of the performance model. In this paper, we apply machine learning (ML) techniques for the simultaneous prediction of three key APM parameters (two drag coefficients and the initial aircraft weight). To accomplish this, we employ an ordinary differential equation (ODE) fitting approach to generate optimized APM parameter labels customized to each individual flight record. Subsequently, we train ML models to capture the relationship between the historical data and the optimized APM parameters. Two different ML model solutions are applied and APM coefficients are predicted for unseen flights. The results indicate that the ML models are able to capture the relationship between APM parameters and flight-related features with good accuracy.
Future Air Traffic Management Concepts Evaluation Tool (FACET) is a system of software for performing computational simulations for evaluating advanced concepts of advanced air-traffic management. FACET includes a program that generates a graphical user interface plus programs and databases that implement computational models of weather, airspace, airports, navigation aids, aircraft performance, and aircraft trajectories. Examples of concepts studied by use of FACET include aircraft self-separation for free flight; prediction of air-traffic-controller workload; decision support for direct routing; integration of spacecraft-launch operations into the U.S. national airspace system; and traffic- flow-management using rerouting, metering, and ground delays. Aircraft can be modeled as flying along either flight-plan routes or great-circle routes as they climb, cruise, and descend according to their individual performance models. The FACET software is modular and is written in the Java and C programming languages. The architecture of FACET strikes a balance between flexibility and fidelity; as a consequence, FACET can be used to model systemwide airspace operations over the contiguous U.S., involving as many as 10,000 aircraft, all on a single desktop or laptop computer running any of a variety of operating systems. Two notable applications of FACET include: (1) reroute conformance monitoring algorithms that have been implemented in one of the Federal Aviation Administration s nationally deployed, real-time, operational systems; and (2) the licensing and integration of FACET with the commercially available Flight Explorer, which is an Internet- based, real-time flight-tracking system.
Predictive Signal Phase and Timing (SPAT) message set is one fundamental building block for vehicle-to-infrastructure (V2I) applications such as Eco-Approach and Departure (EAD) at traffic signal controlled urban intersections. Among the two complementary communication methods namely short-range sidelink (PC5) and long-range cellular radio link (Uu), this paper documents the work with long-range link: the complete data chain includes connecting to the traffic signals via existing backhaul communication network, collecting the raw signal phase state data, predicting the signal state changes and delivering the SPAT data via a geofenced service to requests over HTTP protocols. An Application Programming Interface (API) library is developed to support various cellular data transmission reduction and latency improvement techniques. An emulation-based algorithm is applied to predict the traffic signal state changes to provide adequate prediction horizon (e.g., at minimum 2 minutes) for the cohort energy optimization. In fact, the same connectivity and SPAT delivery methodology has been applied to traffic signalized intersections nationwide in the United States upon public agency approvals for access to their firewalled traffic control network and signal control systems or directly to individual controllers. This methodology proves its effectiveness and potential for rapid growth of such SPAT deliveries at mass production scale without needing infrastructure hardware retrofit or excessive communication means. To support the energy optimization of light and heavy-duty vehicle cohorts of mixed automation and propulsion systems (EV, ICE and hybrid), the connection and SPAT deliveries at two sites were completed, including public roads in Washtenaw County, Michigan and closed track test sites at American Center for Mobility (ACM) in Ypsilanti, Michigan. However, only closed test track results at ACM will be presented in this paper. A neuroevolution based optimizer is developed and implemented to control the speed of a vehicle cohort with different propulsion systems and automation levels. Closed track tests showed significant energy savings of the cohort operation.
Estimating fuel consumption by hybrid diesel buses is challenging due to its diversified operations and driving cycles. Here, long-term transit bus monitoring data were utilized to empirically compare fuel consumption of diesel and hybrid buses under various driving conditions. Artificial neural network (ANN) based high-fidelity microscopic (1 Hz) and mesoscopic (5–60 min) fuel consumption models were developed for hybrid buses. The microscopic model contained 1 Hz driving, grade, and environment variables. The mesoscopic model aggregated 1 Hz data into 5 to 60-minute traffic pattern factors and predicted average fuel consumption over its duration. The prediction results show mean absolute percentage errors of 1–2% for microscopic models and 5–8% for mesoscopic models. The data were partitioned by different driving speeds, vehicle engine demand, and road grade to investigate their impacts on prediction performance.
A simulation evaluated the feasibility and potential benefits of using decision support tools to support time-based airborne spacing and merging for aircraft arriving in the terminal area on charted Flight Management System (FMS) routes. Sixteen trials were conducted in each treatment combination of a 2X2 repeated-measures design. In trials 'with ground tools' air traffic controller participants managed traffic using sequencing and spacing tools. In trials 'with air tools' approximately seventy-five percent of aircraft assigned to the primary landing runway were equipped for airborne spacing, including flight simulators flown by commercial pilots. The results indicate that airborne spacing improves spacing accuracy and is feasible for FMS operations and mixed spacing equipage. Controllers and pilots can manage spacing clearances that contain two call signs without difficulty. For best effect, both decision support tools and spacing guidance should exhibit consistently predictable performance, and merging traffic flows should be well coordinated.
Free-flight is considered to play a major role in the future air traffic environment. Studies are underway addressing different concepts for free-flight and self separation in enroute airspace. One common opinion throughout the different concepts is that the airspace surrounding major airports, the Terminal Radar Approach CONtrol (TRACON) will not be a free flight area. This means that aircraft in this area are completely controlled by air traffic controllers, who may be supported by decision support system like the Center TRACON Automation System (CTAS). How the transition from the free-flight area (enroute airspace) to the terminal area will take place is currently unclear, This paper describes a study at NASA Ames Research Center addressing the perspective of air traffic controllers handling user-preferred (FMS-optimized) descent trajectories during this transition phase. Two major issues in enabling user preferred descents from the controllers' point of view are predictability and controllability. In an environment in which the air traffic services are highly responsive to user preferences controllers need to know, where and when aircraft will change their trajectory and they need to have appropriate means and procedures at hand to control the aircraft according to the overall traffic situation. Predictability shall be enhanced by: 1) Indicating airspace corridors for descending aircraft; 2) Modify the controller interface; 3) Using a ground based conflict probe; 4) Making use of downlinked intent information from the aircraft FMS; and 5) Requiring to fly pilots on user preferred trajectories coupled to the FMS in the lateral and vertical axis. Additional controllability shall be achieved by supporting the controllers with CTAS center tools: 1) Traffic Management Advisor (TMA); 2) Conflict Probing and Trial Planning (CP/TP); and 3) Enroute Descent Advisor (E/DA). The paper describes the general concept and the modifications to current systems required to enable the concept. It explains the experiment design and discusses the results with regard to controller acceptability and usability. Potential benefits and drawbacks of the overall concept are indicated.
An integrated speed prediction framework based on historical traffic data mining and real-time V2I communications for CAVs. The present framework provides multi-horizon speed predictions with different fidelity over short and long horizons. The present multi-horizon speed prediction is integrated with an economic model predictive control (MPC) strategy for the battery thermal management (BTM) of connected and automated electric vehicles (EVs) as a case study. The simulation results over real-world urban driving cycles confirm the enhanced prediction performance of the present data mining strategy over long prediction horizons. Despite the uncertainty in long-range CAV speed predictions, the vehicle level simulation results show that 14% and 19% energy savings can be accumulated sequentially through eco-driving and BTM optimization (eco-cooling), respectively, when compared with normal-driving and conventional BTM strategy.
As artificial intelligence (AI) becomes widespread, there is increasing attention on investigating bias in machine learning (ML) models. Previous research concentrated on classification problems, with little emphasis on regression models. This paper presents an easy-to-apply and effective methodology for mitigating bias in bagging and boosting regression models, that is also applicable to any model trained through minimizing a differentiable loss function. Our methodology measures bias rigorously and extends the ML model's loss function with a regularization term to penalize high correlations between model errors and protected attributes. We applied our approach to three popular tree-based ensemble models: a random forest model (RF), a gradient-boosted model (GBT), and an extreme gradient boosting model (XGBoost). We implemented our methodology on a case study for predicting road-level traffic volume, where RF, GBT, and XGBoost models were shown to have high accuracy. Despite high accuracy, the ML models were shown to perform poorly on roads in minority-populated areas. Our bias mitigation approach reduced minority-related bias by over 50%.
This paper formulates a methodology for estimating the average daily load profiles of EV fast charging stations over a planning horizon of five to ten years. The developed methodology uses historic vehicle registration data, state-level EV adoption targets, seasonal driving patterns, local demographics, competition, and traffic volume information to predict average station usage. Through Monte Carlo simulations, an average daily load profile is obtained for each month in the planning horizon, and prediction uncertainty is quantified. The proposed framework will facilitate the accurate estimation of energy and demand costs incurred by the charging station over the planning period, thereby informing return-on-investment calculations.
An initial appraisal is made of results of two studies of the ground requirements of liquid hydrogen (LH2) air transports. Each hypothesized the use of a 400-passenger 5500 nautical mile range subsonic commercial LH2 transport. Two of the world's busiest commercial airports, Chicago O'Hare International and San Francisco International, were selected for study. The current and predicted wide-body traffic at these airports was assumed to simulate the LH2 transport traffic at these airports in the 1990-1995 time period. Both studies produced conceptual designs for facilities to generate the required quantities of fuel from pipeline gaseous hydrogen and to deliver liquid hydrogen to the airplanes. Although the LH2 and jet fuel facilities were kept apart, both study teams found it practical to converge the fuel supply lines so that with proper safety and operational procedures and specialized LH2 equipment both LH2 and jet fuel transports can use common ramp and gate facilities.
Airborne conflict management is an enabling capability for NASA's Distributed Air-Ground Traffic Management (DAG-TM) concept. DAGTM has the goal of significantly increasing capacity within the National Airspace System, while maintaining or improving safety. Under DAG-TM, autonomous aircraft maintain separation from each other and from managed aircraft unequipped for autonomous flight. NASA Langley Research Center has developed the Autonomous Operations Planner (AOP), an onboard decision support system that provides airborne conflict management (ACM) and strategic flight planning support for autonomous aircraft pilots. The AOP performs conflict detection, prevention, and resolution from nearby traffic aircraft and area hazards. Traffic trajectory information is assumed to be provided by Automatic Dependent Surveillance Broadcast (ADS-B). Reliable trajectory prediction is a key capability for providing effective ACM functions. Trajectory uncertainties due to environmental effects, differences in aircraft systems and performance, and unknown intent information lead to prediction errors that can adversely affect AOP performance. To accommodate these uncertainties, the AOP has been enhanced to create cross-track, vertical, and along-track buffers along the predicted trajectories of both ownship and traffic aircraft. These buffers will be structured based on prediction errors noted from previous simulations such as a recent Joint Experiment between NASA Ames and Langley Research Centers and from other outside studies. Currently defined ADS-B parameters related to navigation capability, trajectory type, and path conformance will be used to support the algorithms that generate the buffers.
The predicted tripling of air traffic within the next 15 years is expected to cause significant aircraft delays and create a major financial burden for the airline industry unless the capacity of the National Airspace System can be increased. One approach to improve throughput and reduce delay is to develop new ground tools, airborne tools, and procedures to reduce the variance of aircraft delivery to the airport, thereby providing an increase in runway throughput capacity and a reduction in arrival aircraft delay. The first phase of the Merging and Spacing Concept employs a ground based tool used by Air Traffic Control that creates an arrival time to the runway threshold based on the aircraft s current position and speed, then makes minor adjustments to that schedule to accommodate runway throughput constraints such as weather and wake vortex separation criteria. The Merging and Spacing Concept also employs arrival routing that begins at an en route metering fix at altitude and continues to the runway threshold with defined lateral, vertical, and velocity criteria. This allows the desired spacing interval between aircraft at the runway to be translated back in time and space to the metering fix. The tool then calculates a specific speed for each aircraft to fly while enroute to the metering fix based on the adjusted land timing for that aircraft. This speed is data-linked to the crew who fly this speed, causing the aircraft to arrive at the metering fix with the assigned spacing interval behind the previous aircraft in the landing sequence. The second phase of the Merging and Spacing Concept increases the timing precision of the aircraft delivery to the runway threshold by having flight crews using an airborne system make minor speed changes during enroute, descent, and arrival phases of flight. These speed changes are based on broadcast aircraft state data to determine the difference between the actual and assigned time interval between the aircraft pair. The airborne software then calculates a speed adjustment to null that difference over the remaining flight trajectory. Follow-on phases still under development will expand the concept to all types of aircraft, arriving from any direction, merging at different fixes and altitudes, and to any airport. This paper describes the implementation phases of the Merging and Spacing Concept, and provides high-level results of research conducted to date.
The concept of dynamic sector design suggests a strategic approach to ease air traffic congestion, which is predicted to become a serious problem in the national airspace system by 2025. Considerable research has been conducted to address the sectorization problem. In previous work, an approach that combines the Voronoi diagrams, Genetic Algorithms (GA), and the iterative deepening algorithm was proposed. However, as originally formulated, the number of sectors used was predefined and only two-dimensional partitions were allowed, which constrained the method's ability to achieve good designs. The current work extends the earlier Voronoi-based method by treating the number of sectors as an additional decision variable, allowing 3D partitions, and developing more comprehensive costs.