Search NASA⌕ Search

SEARCH · Search NASA

Results for “turbulence intensity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Jet model for slot film cooling with effect of free-stream and coolant turbulence

An analysis was performed utilizing the model of a wall jet for obtaining equations that will predict slot film-cooling efficiency under conditions of variable turbulence intensity, flow, and temperature. The analysis, in addition to assessing the effects of the above variables, makes a distinction between an initial region and a fully developed region. Such a distinction is important in determining the role that the turbulence intensity of the coolant plays in effecting film-cooling effectiveness in the area of the slot exit. The results of the analysis were used in the correlation of the results of a well-designed film-cooling experiment. The result of the analysis and experiment was equations that predicted film-cooling efficiency within + or - 4% average deviation for lateral free-stream turbulence intensities up to 24% and blowing rates up to 1.9. These equations should be useful in determining the optimum quantity of cooling air requried for protecting the wall of a combustor.

Simon, Frederick F.↗
NASA NTRS2016

Characterization of Three-Stream Jet Flow Fields

Flow-field measurements were conducted on single-, dual- and three-stream jets using two-component and stereo Particle Image Velocimetry (PIV). The flow-field measurements complimented previous acoustic measurements. The exhaust system consisted of externally-plugged, externally-mixed, convergent nozzles. The study used bypass-to-core area ratios equal to 1.0 and 2.5 and tertiary-to-core area ratios equal to 0.6 and 1.0. Axisymmetric and offset tertiary nozzles were investigated for heated and unheated high-subsonic conditions. Centerline velocity decay rates for the single-, dual- and three-stream axisymmetric jets compared well when axial distance was normalized by an equivalent diameter based on the nozzle system total exit area. The tertiary stream had a greater impact on the mean axial velocity for the small bypass-to-core area ratio nozzles than for large bypass-to-core area ratio nozzles. Normalized turbulence intensities were similar for the single-, dual-, and three-stream unheated jets due to the small difference (10%) in the core and bypass velocities for the dual-stream jets and the low tertiary velocity (50% of the core stream) for the three-stream jets. For heated jet conditions where the bypass velocity was 65% of the core velocity, additional regions of high turbulence intensity occurred near the plug tip which were not present for the unheated jets. Offsetting the tertiary stream moved the peak turbulence intensity levels upstream relative to those for all axisymmetric jets investigated.

Noise↗
NASA NTRS2016

Characterization of Three-Stream Jet Flow Fields

Flow-field measurements were conducted on single-, dual- and three-stream jets using two-component and stereo Particle Image Velocimetry (PIV). The flow-field measurements complimented previous acoustic measurements. The exhaust system consisted of externally-plugged, externally-mixed, convergent nozzles. The study used bypass-to-core area ratios equal to 1.0 and 2.5 and tertiary-to-core area ratios equal to 0.6 and 1.0. Axisymmetric and offset tertiary nozzles were investigated for heated and unheated high-subsonic conditions. Centerline velocity decay rates for the single-, dual- and three-stream axisymmetric jets compared well when axial distance was normalized by an equivalent diameter based on the nozzle system total exit area. The tertiary stream had a greater impact on the mean axial velocity for the small bypass-to-core area ratio nozzles than for large bypass-to-core area ratio nozzles. Normalized turbulence intensities were similar for the single-, dual-, and three-stream unheated jets due to the small difference (10 percent) in the core and bypass velocities for the dual-stream jets and the low tertiary velocity (50 percent of the core stream) for the three-stream jets. For heated jet conditions where the bypass velocity was 65 percent of the core velocity, additional regions of high turbulence intensity occurred near the plug tip which were not present for the unheated jets. Offsetting the tertiary stream moved the peak turbulence intensity levels upstream relative to those for all axisymmetric jets investigated.

Noise↗
NASA NTRS1978

An experimental study of three-dimensional turbulent boundary layer and turbulence characteristics inside a turbomachinery rotor passage

Three-dimensional boundary layer and turbulence measurements of flow inside a rotating helical channel of a turbomachinery rotor are described. The rotor is a four-bladed axial flow inducer operated at large axial pressure gradient. The mean velocity profiles, turbulence intensities and shear stresses, and limiting stream-line angles are measured at various radial and chordwise locations, using rotating triaxial hot-wire and conventional probes. The radial flows in the rotor channel are found to be higher compared to those at zero or small axial pressure gradient. The radial component of turbulence intensity is found to be higher than the streamwise component due to the effect of rotation. Flow near the annulus wall is found to be highly complex due to the interaction of the blade boundary layers and the annulus wall resulting in an appreciable radial inward flow, and a large defect in the mainstream velocity. Increased level of turbulence intensity and shear stresses near the midpassage are also observed near this radial location.

Anand, A. K.↗
DOE OSTI2022

A direct numerical simulation study of the dilution tolerance of propane combustion under spark-ignition engine conditions

Modern spark ignition internal combustion (IC) engines rely on highly diluted fuel-air mixtures to achieve high brake thermal efficiencies. To support this, new engine designs have introduced high stroke-to-bore ratios and cylinder head designs that promote high tumble flow and turbulence intensities. However, mixture dilution through exhaust gas recirculation (EGR) is limited by combustion instabilities manifested in the form of cycle-to-cycle variability. Propane has been observed to have superior EGR dilution tolerance than gasoline, which makes it a very competitive low-carbon fuel for the new IC engines without sacrificing efficiency. Two-dimensional direct numerical simulations (DNS) are performed with detailed chemistry to study and contrast the effect of turbulence intensity and dilution on propane and iso-octane premixed flames at high pressure conditions similar to those in-cylinder. A new reduced mechanism for propane consisting of 53 transported species and 17 quasi-steady state species is developed based on a previously published mechanism and used in these simulations. Three levels of turbulence intensity and two levels of exhaust gas dilution are chosen based on conditions relevant to IC engine operation. The DNS results are analyzed based on the evolution of the flame surface area and the statistics of its driving terms, which are found to be similar for both fuels when there is no dilution but considerably different under high dilution. The analysis of the DNS data provides fundamental insights into the underlying mechanisms for improved stability under dilution.

42 ENGINEERING↗
NASA NTRS2000

Heat Transfer and Flow on the Squealer Tip of a Gas Turbine Blade

Experimental investigations are performed to measure the detailed heat transfer coefficient and static pressure distributions on the squealer tip of a gas turbine blade in a five-bladed stationary linear cascade. The blade is a 2-dimensional model of a modem first stage gas turbine rotor blade with a blade tip profile of a GE-E(sup 3) aircraft gas turbine engine rotor blade. A squealer (recessed) tip with a 3.77% recess is considered here. The data on the squealer tip are also compared with a flat tip case. All measurements are made at three different tip gap clearances of about 1%, 1.5%, and 2.5% of the blade span. Two different turbulence intensities of 6.1% and 9.7% at the cascade inlet are also considered for heat transfer measurements. Static pressure measurements are made in the mid-span and near-tip regions, as well as on the shroud surface opposite to the blade tip surface. The flow condition in the test cascade corresponds to an overall pressure ratio of 1.32 and an exit Reynolds number based on the axial chord of 1.1 x 10(exp 6). A transient liquid crystal technique is used to measure the heat transfer coefficients. Results show that the heat transfer coefficient on the cavity surface and rim increases with an increase in tip clearance. 'Me heat transfer coefficient on the rim is higher than the cavity surface. The cavity surface has a higher heat transfer coefficient near the leading edge region than the trailing edge region. The heat transfer coefficient on the pressure side rim and trailing edge region is higher at a higher turbulence intensity level of 9.7% over 6.1 % case. However, no significant difference in local heat transfer coefficient is observed inside the cavity and the suction side rim for the two turbulence intensities. The squealer tip blade provides a lower overall heat transfer coefficient when compared to the flat tip blade.

Azad, Gm S.↗
DOE OSTI2020

Impact of equilibrium radial electric field on energy loss process after pedestal collapse

An impact of the equilibrium radial electric field on energy loss processes after pedestal collapse is numerically investigated using the BOUT++ framework. Using linear stability analysis, the resistive ballooning mode is shown to be stabilized by the radial shear of the equilibrium radial electric field. On the other hand, the energy loss level after the pedestal collapse increases if the equilibrium radial electric field is taken into account. The spatio-temporal and phase diagram analyses show that the equilibrium radial electric field partially cancels the fluctuation-driven toroidally axisymmetric radial electric field and weakens the E × B shearing rate after pedestal collapse, weakening the turbulence suppression by vortex shearing. Finally, the equilibrium radial electric field therefore increases turbulence intensity in nonlinear cyclic oscillations among pressure gradient, E × B shearing rate, and turbulence intensity, which gives rise to subsequent bursts of turbulent transport and increases the energy loss level.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Long-range Doppler lidar measurements of wind turbine wakes and their interaction with turbulent atmospheric boundary-layer flow at Perdigao 2017

As part of the Perdigão 2017 campaign, vertical RHI (range-height indicator) scans with long-range pulsed Doppler wind lidars were performed aligned with the main wind direction and a wind turbine (WT) located on a mountain ridge. The measurements are used to not only retrieve flow velocities, but also their variance and - by using the turbulent broadening of the Doppler spectrum - also turbulent kinetic energy (TKE) dissipation rate. The study shows that turbulence in the WT wake is dependent on the turbulence of the inflow, but also on atmospheric stability. In stable atmospheric conditions, wakes could be analyzed up to five rotor diameters downstream (D) and showed the maximum turbulence in the wake at 2-3 D, whereas in unstable conditions, the maximum was found at 2 D and the wake could not be detected further than 3 D. A clear dependency of wake turbulence enhancement on inflow turbulence intensity is found, which levels out to no further enhancement at turbulence intensities of 30%.

17 WIND ENERGY↗
NASA NTRS1975

Statistical model for premixed turbulent flames

Statistical concepts and physical arguments are used to develop closure models for the mean energy equation governing one-dimensional, premixed, intense turbulent flames. It is proposed that the turbulent transport terms can be modeled by a turbulent conductivity based on turbulence kinetic energy (k) and energy dissipation rate (epsilon). The models obtained are used to derive correlations for the turbulent flame speed. Results show that there are three different flame regimes: a low-intensity turbulence, wrinkled flame; a high-intensity, fast-chemistry flame; and a high-intensity, finite-rate-chemistry flame.

Gouldin, F. C.↗
DOE OSTI2021

Effects of zonal flows on ion temperature gradient instability in the scrape-off layer of a field-reversed configuration

Gyrokinetic simulations of long wavelength ion temperature gradient (ITG) turbulence in the scrape-off layer (SOL) of a field-reversed configuration (FRC) find that zonal flows are nonlinearly generated and are the dominant mechanism for the nonlinear saturation of the ITG instability. After the ITG saturation, zonal flows remain undamped and gradually suppress the turbulent transport to a very low level. In the simulations with collisions, collisional damping gradually reduces zonal flow amplitude to a lower level, which allows finite ITG turbulence intensity and ion heat transport in the SOL. The steady state turbulence intensity and ion heat transport are found to be proportional to the collision frequency. Furthermore, this favorable scaling suggests that minimizing collisions (e.g. increasing temperature, reducing impurity content, etc) and preserving toroidal symmetry could improve plasma confinement in the FRC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1999

Large Eddy Simulation of Aircraft Wake Vortices in a Homogeneous Atmospheric Turbulence: Vortex Decay and Descent

The effects of ambient turbulence on decay and descent of aircraft wake vortices are studied using a validated, three-dimensional: large-eddy simulation model. Numerical simulations are performed in order to isolate the effect of ambient turbulence on the wake vortex decay rate within a neutrally-stratified atmosphere. Simulations are conducted for a range of turbulence intensities, by injecting wake vortex pairs into an approximately homogeneous and isotropic turbulence field. The decay rate of the vortex circulation increases clearly with increasing ambient turbulence level, which is consistent with field observations. Based on the results from the numerical simulations, simple decay models are proposed as functions of dimensionless ambient turbulence intensity (eta) and dimensionless time (T) for the circulation averaged over a range of radial distances. With good agreement with the numerical results, a Gaussian type of vortex decay model is proposed for weak turbulence: while an exponential type of Tortex decay model can be applied for strong turbulence. A relationship for the vortex descent based on above vortex decay model is also proposed. Although the proposed models are based on simulations assuming neutral stratification, the model predictions are compared to Lidar vortex measurements observed during stable, neutral, and unstable atmospheric conditions. In the neutral and unstable atmosphere, the model predictions appear to be in reasonable agreement with the observational data, while in the stably-stratified atmosphere, they largely underestimate the observed circulation decay with consistent overestimation of the observed vortex descent. The underestimation of vortex decay during stably-stratified conditions suggests that stratification has an important influence on vortex decay when ambient levels of turbulence are weak.

Han, Jongil↗
NASA NTRS1984

On the design of contractions and settling chambers for optimal turbulence manipulations in wind tunnels

The sensitivity of a moderate axisymmetric contraction of turbulence to upstream conditions is parametrically investigated in terms of turbulence intensities and integral length scales. Semi-empirical correlations are derived to characterize the development of turbulence intensities and integral length scales downstream of typical wind-tunnel turbulence manipulators. A new approach is described, permitting wind-tunnel designers to select the characteristic mesh of the turbulence manipulators, a well as the distance from them to the contraction, in order to obtain certain required turbulence characteristics in the test section at the exit of the contraction. The design charts strongly suggest that it may not be possible to achieve small scales and low intensities simultaneously, when using a contraction ratio of nine or larger. The results also confirm that the rapid distortion theory is only valid, with a proper viscous dissipation correction, up to the 'critical point' of a contraction. At that point, the scales of the various components of the velocity are equal and intercomponent transfer from the lateral to the streamwise velocities commences.

Nagib, H. M.↗
NASA NTRS1990

Particle acceleration by intense auroral VLF turbulence

Broadband turbulence in the lower-hybrid to plasma frequency range is found in a variety of forms in the suprauroral region, most notably as auroral hiss and VLF saucers. When the turbulence is intense, it is observed to be associated with ion conics (ions heated transverse to the geomagnetic field) and 'counter-streaming' electron fluxes (heated in both directions parallel to the field). A review is presented of the dispersion and propagation characteristics of whistler resonance-cone waves, which comprise the turbulence. Plasma simulation and mesoscale (Monte Carlo) simulation techniques are used to illustrate the interaction of the ambient plasma with the turbulence. These calculations demonstrate how this interaction results in transverse heating of the ions and parallel heating of the electrons of the plasma, leading to the formation of the observed heated and accelerated particle fluxes.

Retterer, John M.↗
NASA NTRS1976

Lip noise generated by flow separation from nozzle surfaces

Flow separation from nozzle surfaces can be a source of significant noise in addition to the jet noise. When no flow separation region exists only jet noise is observed at every angle, for velocities down to 120 m/sec, with both low and high levels of initial turbulence. Intense nearly periodic turbulence and noise is caused by flow separation from the thin core nozzle lip of a coaxial nozzle. This can be described by a combination of aeolian tone and trailing edge noise theory. Noise caused by flow separation from the surfaces of other nozzle geometries has somewhat different characteristics.

Olsen, W.↗
NASA NTRS1985

Low Reynolds number separation bubble research at UTRC

The facilities and techniques being applied in investigations of laminar separation bubbles on low Re airfoils at the United Technologies Research Center are described. The research is focused on developing a database and predictive models for use in designing compressor, fan and turbine blades. Flow data are gathered primarily by laser Doppler velocimetry. Experimental procedures are being devised which will permit formation of a short bubble for characterizations of the velocity profiles in and around the bubble and boundary layer. Further tests are directed at defining the size and location of the bubble and the transition in the separated shear layer. The sensitivity of the bubble to alterations in the Re, pressure gradient, turbulence intensity and the turbulence scales will be examined. The effects of surface curvature and roughness on the bubble will also be studied. Details of the wind tunnel facility and the steps being taken to define conditions for reliably producing the short bubble are outlined.

Patrick, W. P.↗
NASA NTRS1974

The effects of forward speed on fan inlet turbulence and its relation to tone noise generation

The effect of forward speed on fan inlet turbulence was studied to determine the feasibility of using a wind tunnel to simulate various flight conditions where turbulence of atmospheric origin enters the engine inlet. The investigation was conducted in the Ames 7- by 10-foot Wind Tunnel with a small-scale low pressure-ratio fan. Results indicate that a wind tunnel of this size does produce large turbulence scale appropriate for simulation of atmospheric scale. But the tunnel's low turbulence intensity seems to cause results contrary to existing theories on the effects of fan inlet velocity ratio on turbulence scale. Limited results with artificially increased turbulence intensity removed this contradiction. Acoustic measurements showed the impact of inlet turbulence on fantone noise.

Hodder, B. K.↗
NASA NTRS1984

Relationship of isolated turbulent regions to the general turbulent background, part 4.4A

The atmosphere below 100 km is often referred to as the homosphere; the region above, the heterosphere. In the homosphere, constitutents are mixed, and average molecular weight is constant. In the heterosphere, diffusive separation occurs, and species tend to fractionate; average molecular weight decreases with height. Mixing in the homosphere has its source dynamical (wind) energy. Against this background turbulence, intermittent enhancements of turbulent intensity are observed. Some of these enhancements are long lived -- for example, a turbulent layer at approximately 86 km altitude seems to be almost a permanent feature of the (global) daytime D region, as oserved by partial reflection. This may well be a delineation of the mesopause level, since long-term radio meteor studies have shown approx. 85 km to be the breakpoint between thermospheric circulation above, and mesospheric circulation below. The use of stratosphere-troposphere (ST) radars in the lower atmosphere, and mesosphere-stratosphere-troposphere (MST) and partial-reflection radars in the mesosphere for height/time profiles of turbulent intensity is discussed.

Roper, R. G.↗
NASA NTRS2019

Flow Quality Survey of the 9- by 15-Foot Low Speed Wind Tunnel (2015 and 2016 Tests) Prior to Acoustic Improvement Modifications

A flow quality survey (FQS) was conducted in December 2015 and January 2016 to characterize the flow quality of the 9- by 15-Foot Low-Speed Wind Tunnel (9×15 LSWT) test section prior to the start of significant structural and acoustic modifications. The data from this FQS will be compared with data collected during a replicated FQS after completion of the acoustic improvement modifications. This document contains only the FQS data collected in December 2015 and January 2016 using the 15-ft survey rake and the 18-in. boundary layer rakes in the 9×15 LSWT. The spatial variation at one axial test section station (TSTA), nominally TSTA 198, and five vertical heights of the 15-ft survey rake was computed for Mach number, velocity, total and static pressure, total temperature, and flow angularity (pitch and yaw). Three hot-wire probes mounted to the 15-ft survey rake were used to measure turbulence intensity; however, data from a previous test entry were used as the mean turbulence intensity baseline value, as there were issues with the hot-wire performance. The boundary layer pressure profiles around the perimeter of the test section at TSTA 199 were also measured and the boundary layer heights computed. All calculated results are tabulated for each facility condition set point.

Johnson, Aaron M.↗