Search NASA⌕ Search

SEARCH · Search NASA

Results for “variable density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Altimetry data and the elastic stress tensor of subduction zones

The stress field in the lithosphere caused by the distribution of density anomalies associated to the geoidal undulations observed by the GEOS-3 and SEASAT Earth satellites in the Tonga region was studied. Different models of the lithosphere were generated with different assumptions on the density distribution and geometry, all generating a geoid profile almost identical to the observed one. The first model is the Airy isostatic hypothesis which consists of a crust of density 2.85 laying on a lithosphere of density 3.35. The models obtained with different compensation depths give residual shortwavelength anomalies of the order of several tens of mgal and several tens of meters geoidal undulations. It indicates that there is no isostasy of the Airy type in the Tonga region because the observed geoid has very smooth undulation of about 25 m over a distance of 2000 km. The Pratt isostatic hypothesis is used in a model consisting of a crust of variable density laying on a lithosphere of higher density. This model gives smaller residual anomalies but still shows that there is no isostasy of the Pratt type in the Tonga region because the observed geoidal undulation are much smaller and smoother than the residual undulations associated to the Pratt model of isostasy.

Caputo, M.↗
NASA NTRS2004

Microstructural Evaluations of Baseline HSR/EPM Disk Alloys

Six alloys representing two classes of powder metallurgy nickel-based superalloys were examined by transmission electron microscopy (TEM) and phase extraction. Alloys KM4, CH98, IN-100 and 456 are based on a Ni-18Co-12Cr composition while alloys Rene' 88 DT and SR 3 have lower Al and Co and higher Cr contents. The lambda size distributions were determined from quantitative image analysis of the TEM images. The volume fraction of lambda and carbides and the composition of the phases were determined by a combination of phase extraction and TEM. The results showed many similarities in lambda size distributions, grain boundary serrations, and grain boundary carbide frequencies between alloys KM4, CH98, 456, Rene' 88 DT and SR 3 when heat treated to give an approximate grain size of ASTM 6. The density of grain boundary carbides in KM4 was shown to substantially increase as the grain size increased. IN-100 and 456 subjected to a serration cooling heat treatment had much more complex lambda size distributions with very large intergranular and intragranular secondary lambda as well as finer than average cooling and aging lambda. The grain boundary carbides in IN-100 were similar to the other alloys, but 456 given the serration cooling heat treatment had a more variable density of grain boundary carbides. Examination of the phases extracted from the matrix showed that there were significant differences in the phase chemistries and elemental partitioning ratios between the various alloys.

Gabb, Timothy P.↗
NASA NTRS1988

Nongradient diffusion in premixed turbulent flames

Recent theoretical and experimental results demonstrating the interaction between force fields and density inhomogeneities as they arise in premixed turbulent flames are discussed. In such flames, the density fluctuates between two levels, the high density in reactants rho sub r and the low density in products rho sub p, with the ratio rho sub r/rho sub p on the order of five to ten in flows of applied interest. The force fields in such flames arise from the mean pressure drop across the flame or from the Reynolds shear stresses in tangential flames with constrained streamlines. The consequence of the interaction is nongradient turbulent transport, countergradient in the direction normal to the flame and nongradient in the tangential direction. The theoretical basis for these results, the presently available experimental support therefore and the implications for other variable density turbulent flows are discussed.

Libby, Paul A.↗
NASA NTRS1964

Injection and distribution of liquids in the flow fields of blunt shapes at hypersonic speeds

A possible method for reducing the attenuation of radio transmission from hypersonic vehicles is by injection of a liquid into the flow field. The hot plasma layer surrounding the vehicle could presumably be quenched if the latent heat of the liquid and the heat capacity of the vapor could be utilized efficiently. In the case of stagnation-point injection, the momentum of the liquid could be utilized to modify the bow shock and possibly reduce the initial ionization. To attain these objectives of efficient coolant utilization or modification of the bow shock a knowledge of the liquid injection, atomization, spray penetration, and evaporation processes is required. This report presents the results of a study of liquid injection into hypersonic flow fields. A simplified theory for evaporation distances is derived and is shown to be in qualitative agreement with experimental data. Correlation of experimental data for maximum cross-current penetration of the liquid spray for injection near the shoulder pf a hemisphere cylinder, a sphere 9° cone, and a Mercury model are given. These data were obtained in the Langley Mach 8 variable density tunnel with both liquid nitrogen and water injection to provide a large range of liquid parameters. Flow-field disturbances, as indicated by schlieren photographs and surface pressures, increased with the ratio of coolant mass flux to airstream mass flux. For stagnation-point injection, the maximum shock standoff distance was correlated by the ratio of the liquid jet momentum flux to the airstream momentum flux.

Ivan E. Beckwith↗
NASA NTRS1972

Investigation of the performance characteristics of Doppler radar technique for aircraft collision hazard warning, phase 3

System studies, equipment simulation, hardware development and flight tests which were conducted during the development of aircraft collision hazard warning system are discussed. The system uses a cooperative, continuous wave Doppler radar principle with pseudo-random frequency modulation. The report presents a description of the system operation and deals at length with the use of pseudo-random coding techniques. In addition, the use of mathematical modeling and computer simulation to determine the alarm statistics and system saturation characteristics in terminal area traffic of variable density is discussed.

Source record↗
NASA NTRS1972

A review of the Grumman orbiter wind tunnel heat transfer tests

Tests were conducted in the NASA Langley continuous flow, variable density and Mach 20 helium tunnels. The orbiter was tested alone and with various side and tandem mounted tanks. Test conditions spanned a Reynolds number range which resulted in both laminar and turbulent flows. Experimental studies also examined the heat transfer problems associated with integration of the auxiliary propulsion system into the orbiter. Tests in the hypersonic shock tunnel investigated heating to cavities and heating from single and multiple hydrogen-oxygen plumes while tests, run as part of the configuration evaluation, examined the heating to wing pods.

Mendelsohn, A. R.↗
NASA NTRS1972

High Reynolds number turbulent heating to two simplified shuttle configurations

Turbulent heating and transition data, taken from three test facilities, for two space shuttle configurations are presented. Major efforts were on: (1) the effect of the two geometries having different amounts of cross flow and how the different cross flows affect heating and transition, (2) the experimental level of turbulent heating and the ability to predict the level of turbulent heating, and (3) a comparison of the transitional and turbulent heating in three facilities with two model scale sizes to investigate the facility effects and scale-size effect on transition and turbulent heating. The three facilities in which the configurations were tested are the Langley Mach 8 variable-density hypersonic tunnel and the Arnold Engineering Development Center tunnel B and tunnel F at Mach numbers of 8 and 10.5, respectively.

Johnson, C. B.↗
NASA NTRS1971

Effect of buoyancy on fuel containment in an open-cycle gas-core nuclear rocket engine.

Analysis aimed at determining the scaling laws for the buoyancy effect on fuel containment in an open-cycle gas-core nuclear rocket engine, so conducted that experimental conditions can be related to engine conditions. The fuel volume fraction in a short coaxial flow cavity is calculated with a programmed numerical solution of the steady Navier-Stokes equations for isothermal, variable density fluid mixing. A dimensionless parameter B, called the Buoyancy number, was found to correlate the fuel volume fraction for large accelerations and various density ratios. This parameter has the value B = 0 for zero acceleration, and B = 350 for typical engine conditions.

Putre, H. A.↗
NASA NTRS1973

Report of conference evaluation committee

A general classification is made of a number of approaches used for the prediction of turbulent shear flows. The sensitivity of these prediction methods to parameter values and initial data are discussed in terms of variable density, pressure fluctuation, gradient diffusion, low Reynolds number, and influence of geometry.

Morkovin, M. V.↗