Search NASA⌕ Search

SEARCH · Search NASA

Results for “variable free”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Clinical Outcome of Hypofractionated Stereotactic Radiotherapy for Abdominal Lymph Node Metastases

Purpose: We report the medium-term clinical outcome of hypofractionated stereotactic body radiotherapy (SBRT) in a series of patients with either a solitary metastasis or oligometastases from different tumors to abdominal lymph nodes. Methods and Materials: Between January 2006 and June 2009, 19 patients with unresectable nodal metastases in the abdominal retroperitoneal region were treated with SBRT. Of the patients, 11 had a solitary nodal metastasis and 8 had a dominant nodal lesion as part of oligometastatic disease, defined as up to five metastases. The dose prescription was 45 Gy to the clinical target volume in six fractions. The prescription had to be downscaled by 10% to 20% in 6 of 19 cases to keep within dose/volume constraints. The first 11 patients were treated with three-dimensional conformal techniques and the last 8 by volumetric intensity-modulated arc therapy. Median follow-up was 1 year. Results: Of 19 patients, 2 had a local progression at the site of SBRT; both also showed concomitant tumor growth at distant sites. The actuarial rate of freedom from local progression was 77.8% {+-} 13.9% at both 12 and 24 months. Eleven patients showed progressive local and/or distant disease at follow-up. The 12- and 24-month progression-free survival rates were 29.5% {+-} 13.4% and 19.7% {+-} 12.0%, respectively. The number of metastases (solitary vs. nonsolitary oligometastases) emerged as the only significant variable affecting progression-free survival (p < 0.0004). Both acute and chronic toxicities were minimal. Conclusions: Stereotactic body radiotherapy for metastases to abdominal lymph nodes was shown to be feasible with good clinical results in terms of medium-term local control and toxicity rates. Even if most patients eventually show progressive disease at other sites, local control achieved by SBRT may be potentially significant for preserving quality of life and delaying further chemotherapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Patterns of Failure After Concurrent Bevacizumab and Hypofractionated Stereotactic Radiation Therapy for Recurrent High-Grade Glioma

Purpose: Concurrent bevacizumab with hypofractionated stereotactic radiation therapy (HSRT) is safe and effective for the treatment of recurrent high-grade gliomas (HGG). The objective of this study was to characterize the patterns of failure after this treatment regimen. Methods and Materials: Twenty-four patients with recurrent enhancing HGG were previously treated on an institutional review board-approved protocol of concurrent bevacizumab and reirradiation. Patients received 30 Gy in 5 fractions to the recurrent tumor with HSRT. Brain magnetic resonance imaging (MRI) was performed every 2 cycles, and bevacizumab was continued until clinical or radiographic tumor progression according to the criteria of Macdonald et al. MRI at the time of progression was fused to the HSRT treatment plan, and the location of recurrence was classified on the basis of volume within the 95% isodose line. Outcomes based on patient characteristics, tumor grade, recurrence pattern, and best response to treatment were analyzed by the Kaplan-Meier method. Results: Twenty-two patients experienced either clinical or radiographic progression. Recurrent tumor was enhancing in 15 (71.4%) and nonenhancing in 6 (28.6%) patients. Eleven patients (52.4%) had recurrence within the radiation field, 5 patients (23.8%) had marginal recurrence, and 5 patients had recurrence outside the radiation field. Pattern of enhancement and location of failure did not correlate with overall survival or progression-free survival. Radiographic response was the only variable to significantly correlate with progression-free survival. Conclusions: Despite the promising initial response seen with the addition of HSRT to bevacizumab as salvage treatment for recurrent HGG, approximately half of patients ultimately still experience failure within the radiation field. The rate of local failure with the addition of HSRT seems to be lower than that seen with bevacizumab alone in the salvage setting. Our data underscore the radioresistance of HGG and the need for better salvage treatments.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Linear and nonlinear dynamic analysis by boundary element method

An advanced implementation of the direct boundary element method (BEM) applicable to free-vibration, periodic (steady-state) vibration and linear and nonlinear transient dynamic problems involving two and three-dimensional isotropic solids of arbitrary shape is presented. Interior, exterior, and half-space problems can all be solved by the present formulation. For the free-vibration analysis, a new real variable BEM formulation is presented which solves the free-vibration problem in the form of algebraic equations (formed from the static kernels) and needs only surface discretization. In the area of time-domain transient analysis, the BEM is well suited because it gives an implicit formulation. Although the integral formulations are elegant, because of the complexity of the formulation it has never been implemented in exact form. In the present work, linear and nonlinear time domain transient analysis for three-dimensional solids has been implemented in a general and complete manner. The formulation and implementation of the nonlinear, transient, dynamic analysis presented here is the first ever in the field of boundary element analysis. Almost all the existing formulation of BEM in dynamics use the constant variation of the variables in space and time which is very unrealistic for engineering problems and, in some cases, it leads to unacceptably inaccurate results. In the present work, linear and quadratic isoparametric boundary elements are used for discretization of geometry and functional variations in space. In addition, higher order variations in time are used. These methods of analysis are applicable to piecewise-homogeneous materials, such that not only problems of the layered media and the soil-structure interaction can be analyzed but also a large problem can be solved by the usual sub-structuring technique. The analyses have been incorporated in a versatile, general-purpose computer program. Some numerical problems are solved and, through comparisons with available analytical and numerical results, the stability and high accuracy of these dynamic analysis techniques are established.

Ahmad, Shahid↗

Minimizing the Standard Deviation of Spatially Averaged Surface Cross-Sectional Data from the Dual-Frequency Precipitation Radar

For an airborne or spaceborne radar, the precipitation-induced path attenuation can be estimated from the measurements of the normalized surface cross section, sigma 0, in the presence and absence of precipitation. In one implementation, the mean rain-free estimate and its variability are found from a lookup table (LUT) derived from previously measured data. For the dual-frequency precipitation radar aboard the global precipitation measurement satellite, the nominal table consists of the statistics of the rain-free 0 over a 0.5 deg x 0.5 deg latitude-longitude grid using a three-month set of input data. However, a problem with the LUT is an insufficient number of samples in many cells. An alternative table is constructed by a stepwise procedure that begins with the statistics over a 0.25 deg x 0.25 deg grid. If the number of samples at a cell is too few, the area is expanded, cell by cell, choosing at each step that cell that minimizes the variance of the data. The question arises, however, as to whether the selected region corresponds to the smallest variance. To address this question, a second type of variable-averaging grid is constructed using all possible spatial configurations and computing the variance of the data within each region. Comparisons of the standard deviations for the fixed and variable-averaged grids are given as a function of incidence angle and surface type using a three-month set of data. The advantage of variable spatial averaging is that the average standard deviation can be reduced relative to the fixed grid while satisfying the minimum sample requirement.

spaceborne meteorological radar↗

Solution of the Problem of Free Vibrations of a Nonthin Orthotropic Shallow Shell of Variable Thickness in the Refined Statement

We consider the problem of investigation of the spectrum of natural vibrations of a nonthin orthotropic shallow shell variable in two coordinate directions of thickness in the nonclassical statement. The approach to the solution of the obtained two-dimensional boundary-value problem is based on its reduction (by the method of spline-approximation of the unknown functions along one coordinate direction) to the one-dimensional problem with its subsequent solution. We study different cases of boundary conditions imposed on the contours of the shell. We also perform the comparison and analysis of the natural frequencies and modes of vibrations of orthotropic shells of constant and variable thickness.

42 ENGINEERING↗

A Method for Characterizing Thermoset Polyimides

Thermoset polyimides have great potential for successfully meeting tough stress and temperature challenges in the advanced aircraft development program. However, studies of structure-property relationships in these materials have not been very successful so far. Positron lifetime spectroscopy (PLS) has been used to investigate free volumes and associated parameters in a series of variable, segmental molecular weight samples. The free volume correlates well with the molecular weight M(sub c), the cross-link density v, and the coefficient of thermal expansion (CTE) of these materials. Currently, no other techniques are available for direct measurement of these parameters, particularly for polymers in solid phase. Experimental results and their interpretations are presented.

Ranganathaiah, C.↗

Wind Tunnel Interference Effects on Tilt Rotor Testing Using Computational Fluid Dynamics

Experimental techniques to measure rotorcraft aerodynamic performance are widely used. However, most of them are either unable to capture interference effects from bodies, or require an extremely large computational budget. The objective of the present research is to develop an XV-15 Tilt Rotor Research Aircraft rotor model for investigation of wind tunnel wall interference using a novel Computational Fluid Dynamics (CFD) solver for rotorcraft, RotCFD. In RotCFD, a mid-fidelity URANS solver is used with an incompressible flow model and a realizable k-ε turbulence model. The rotor is, however, not modeled using a computationally expensive, unsteady viscous body-fitted grid, but is instead modeled using a blade element model with a momentum source approach. Various flight modes of the XV-15 isolated rotor, including hover, tilt and airplane mode, have been simulated and correlated to existing experimental and theoretical data. The rotor model is subsequently used for wind tunnel wall interference simulations in the National Full-Scale Aerodynamics Complex (NFAC) at NASA Ames Research Center in California. The results from the validation of the isolated rotor performance showed good correlation with experimental and theoretical data. The results were on par with known theoretical analyses. In RotCFD the setup, grid generation and running of cases is faster than many CFD codes, which makes it a useful engineering tool. Performance predictions need not be as accurate as high-fidelity CFD codes, as long as wall effects can be properly simulated. For both test sections of the NFAC wall interference was examined by simulating the XV-15 rotor in the test section of the wind tunnel and with an identical grid but extended boundaries in free field. Both cases were also examined with an isolated rotor or with the rotor mounted on the modeled geometry of the Tiltrotor Test Rig (TTR). A 'quasi linear trim' was used to trim the thrust for the rotor to compare the power as a unique variable. Power differences between free field and wind tunnel cases were found from -7 % to 0 % in the 80- by 120-Foot Wind Tunnel test section and -1.6 % to 4.8 % in the 40- by 80-Foot Wind Tunnel, depending on the TTR orientation, tunnel velocity and blade setting. The TTR will be used in 2016 to test the Bell 609 rotor in a similar fashion to the research in this report.

CFD↗

Wind Tunnel Interference Effects on Tilt Rotor Testing Using Computational Fluid Dynamics

Experimental techniques to measure rotorcraft aerodynamic performance are widely used. However, most of them are either unable to capture interference effects from bodies, or require an extremely large computational budget. The objective of the present research is to develop an XV-15 Tiltrotor Research Aircraft rotor model for investigation of wind tunnel wall interference using a novel Computational Fluid Dynamics (CFD) solver for rotorcraft, RotCFD. In RotCFD, a mid-fidelity Unsteady Reynolds Averaged Navier-Stokes (URANS) solver is used with an incompressible flow model and a realizable k-ε turbulence model. The rotor is, however, not modeled using a computationally expensive, unsteady viscous body-fitted grid, but is instead modeled using a blade-element model (BEM) with a momentum source approach. Various flight modes of the XV-15 isolated rotor, including hover, tilt, and airplane mode, have been simulated and correlated to existing experimental and theoretical data. The rotor model is subsequently used for wind tunnel wall interference simulations in the National Full-Scale Aerodynamics Complex (NFAC) at Ames Research Center in California. The results from the validation of the isolated rotor performance showed good correlation with experimental and theoretical data. The results were on par with known theoretical analyses. In RotCFD the setup, grid generation, and running of cases is faster than many CFD codes, which makes it a useful engineering tool. Performance predictions need not be as accurate as high-fidelity CFD codes, as long as wall effects can be properly simulated. For both test sections of the NFAC wall, interference was examined by simulating the XV-15 rotor in the test section of the wind tunnel and with an identical grid but extended boundaries in free field. Both cases were also examined with an isolated rotor or with the rotor mounted on the modeled geometry of the Tiltrotor Test Rig (TTR). A "quasi linear trim" was used to trim the thrust for the rotor to compare the power as a unique variable. Power differences between free field and wind tunnel cases were found from -7 to 0 percent in the 80- by 120-Foot Wind Tunnel and -1.6 to 4.8 percent in the 40- by 80-Foot Wind Tunnel, depending on the TTR orientation, tunnel velocity, and blade setting. The TTR will be used in 2016 to test the Bell 609 rotor in a similar fashion to the research in this report.

CFD↗

Conceptual Design of Pulverized Coal Electricity Generating Units for Flexible Operation

This National Energy Technology Laboratory (NETL) study addresses the conceptual design of greenfield pulverized coal (PC) plants intended for flexible rather than high capacity factor baseload operation. The United States has plentiful, low-cost natural gas resources - studies of aggressive decarbonization scenarios of the US energy sector suggest that the variability of carbon-free power can be economically addressed using dispatchable natural gas-fueled generation. Globally, natural gas resources are not as plentiful or low cost; consequently, some regions of the world are anticipated to continue to rely upon coal generation, even as they pursue decarbonization efforts. To support the increased utilization of variable renewable generation in these coal-dependent regions, plant designs must target low-capacity factor coal plants with increased emphasis on flexibility attributes such as start-up times, ramp rates, minimum load, and part-load heat rates. While much work has been performed on the improvement of the flexibility for existing coal plants originally designed for baseload service, little public literature exists on clean sheet design for flexible operation. This conceptual design study aims to define the features, performance characteristics, and costs for greenfield coal plants intended for flexible operation. Quantifying these characteristics provides critical information required by utility owners, grid planners, energy market modelers, and energy policy decision makers in coal-dependent regions of the world to better understand how coal-fired power plants can support a transition to low carbon generation.

20 FOSSIL-FUELED POWER PLANTS↗

Deriving reliable nucleation rates from metadynamics simulations: Application to Yukawa fluids

In order to solidify the usefulness of metadynamics in studying nucleation of crystals from supercooled liquids, this work provides a specific procedure to calculate nucleation free energy barriers. After a pedagogical review of the important elements of classical nucleation theory and how metadynamics is used to find nucleation free energy barriers, we explain the benefits of local collective variables over more common global collective variables. We show how a metadynamics free energy barrier must be carefully post-processed so that classical nucleation theory can be applied to calculate nucleation rates. We apply our procedure to a Yukawa plasma and show that a particular physically motivated fit to metadynamics data reproduces low-temperature reference data, justifying the usefulness of metadynamics to predict nucleation rates.

42 ENGINEERING↗

Variational Calculation for the Equation of State of Hot Asymmetric Nuclear Matter

We calculate the equation of state (EOS) of asymmetric nuclear matter at finite temperatures with the cluster variational method based on the realistic nuclear Hamiltonian composed of the AV18 and UIX nuclear potentials. The free energy is calculated with an extension of the variational method proposed by Schmidt and Pandharipande. The obtained thermodynamic quantities such as entropy, internal energy, pressure and chemical potential derived from the free energy are reasonable. It is also found that the present variational calculation is self-consistent. These thermodynamic quantities are essential ingredients in our project for constructing a new nuclear EOS applicable to supernova simulations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Permutationally Invariant Networks for Enhanced Sampling (PINES): Discovery of Multimolecular and Solvent-Inclusive Collective Variables

The typically rugged nature of molecular free energy landscapes can frustrate efficient sampling of the thermodynamically relevant phase space due to the presence of high free energy barriers. Enhanced sampling techniques can improve phase space exploration by accelerating sampling along particular collective variables (CVs). A number of techniques exist for data-driven discovery of CVs parameterizing the important large scale motions of the system. A challenge to CV discovery is learning CVs invariant to symmetries of the molecular system, frequently rigid translation, rigid rotation, and permutational relabeling of identical particles. Of these, permutational invariance has proved a persistent challenge in frustrating the data-driven discovery of multi-molecular CVs in systems of self-assembling particles and solvent-inclusive CVs for solvated systems. In this work, we integrate Permutation Invariant Vector (PIV) featurizations with autoencoding neural networks to learn nonlinear CVs invariant to translation, rotation, and permutation, and perform interleaved rounds of CV discovery and enhanced sampling to iteratively expand sampling of configurational phase space and obtain converged CVs and free energy landscapes. Here, we demonstrate the Permutationally Invariant Network for Enhanced Sampling (PINES) approach in applications to the self-assembly of a 13-atom Argon cluster, association/dissociation of a NaCl ion pair in water, and hydrophobic collapse of a C 45 H 92 n-pentatetracontane polymer chain. We make the approach freely available as a new module within the PLUMED2 enhanced sampling libraries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Designing and testing inflationary models with Bayesian networks

Even simple inflationary scenarios have many free parameters. Beyond the variables appearing in the inflationary action, these include dynamical initial conditions, the number of fields, and couplings to other sectors. These quantities are often ignored but cosmological observables can depend on the unknown parameters. We use Bayesian networks to account for a large set of inflationary parameters, deriving generative models for the primordial spectra that are conditioned on a hierarchical set of prior probabilities describing the initial conditions, reheating physics, and other free parameters. We use N{sub f}-quadratic inflation as an illustrative example, finding that the number of e-folds N{sub *} between horizon exit for the pivot scale and the end of inflation is typically the most important parameter, even when the number of fields, their masses and initial conditions are unknown, along with possible conditional dependencies between these parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental Investigations of Clustering in Low Density Nuclear Matter

The formation of clusters in low density matter formed in near Fermi energy heavy ion collisions has been investigated using the NIMROD multi-detector at Texas A and M University. Emphasis is on elucidation of the low density equation of state. Temperature and density dependent symmetry free energies derived from isoscaling analyses of the yields of nuclei with A{<=}4 are far above those obtained in common effective interaction calculations, reflecting the cluster formation. A possible extensionof the experimental techniques to investigations of nuclear Bose condensates is also discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Gaia EDR3 view of Johnson-Kron-Cousins standard stars: the curated Landolt and Stetson collections

In the era of large surveys and space missions, it is necessary to rely on large samples of well-characterized stars for inter-calibrating and comparing measurements from different surveys and catalogues. Among the most employed photometric systems, the Johnson-Kron-Cousins has been used for decades and for a large amount of important datasets. Our goal is to profit from the Gaia EDR3 data, Gaia official cross-match algorithm, and Gaia -derived literature catalogues, to provide a well-characterized and clean sample of secondary standards in the Johnson-Kron-Cousins system, as well as a set of transformations between the main photometric systems and the Johnson-Kron-Cousins one. Using Gaia as a reference, as well as data from reddening maps, spectroscopic surveys, and variable stars monitoring surveys, we curated and characterized the widely used Landolt and Stetson collections of more than 200 000 secondary standards, employing classical as well as machine learning techniques. In particular, our atmospheric parameters agree significantly better with spectroscopic ones, compared to other machine learning catalogues. We also cross-matched the curated collections with the major photometric surveys to provide a comprehensive set of reliable measurements in the most widely adopted photometric systems. We provide a curated catalogue of secondary standards in the Johnson-Kron-Cousins system that are well-measured and as free as possible from variable and multiple sources. We characterize the collection in terms of astrophysical parameters, distance, reddening, and radial velocity. We provide a table with the magnitudes of the secondary standards in the most widely used photometric systems (ugriz, grizy, Gaia , HIPPARCOS, Tycho , 2MASS). We finally provide a set of 167 polynomial transformations, valid for dwarfs and giants, metal-poor and metal-rich stars, to transform UBVRI magnitudes in the above photometric systems and vice-versa.

79 ASTRONOMY AND ASTROPHYSICS↗

Model Predictive Control of GTAW Weld Pool Penetration

Weld pool penetration is a major implication of weld integrity but it is not directly measurable. The key to solving this issue is to find or create observable phenomena that can be used to derive the penetration. An innovative method has recently been proposed/developed to derive the penetration from the reflection of projected laser from an oscillating weld pool surface. Yet, in addition to the penetration, the oscillation, thus the reflection determined by it, also depends on the pulse amplitude of the current, which needs to be adjusted as the control variable to feedback control the penetration as the output. This dependence imposes a constraint on the control algorithm such that the adjustment of the control variable must be relatively slow to minimize additional sources that affect the oscillation/sensor. This restriction on the control variable adjustment also brings challenges to the identification of the dynamic model of the weld process to be controlled, which has to apply a varying control signal to stimulate the dynamics. To solve these issues, this letter proposes using a low order model to catch the dominant dynamics such that a high speed variation in the control signal can be avoided when choosing the model predictive control algorithm. This allows use of relatively poor models to determine the adjustment on the pulsing amplitude, and still achieves relatively accurate control. Experimental results verified the effectiveness of the resultant penetration control system despite the restrictions imposed by the penetration sensor, which affect the identification of high order dynamics and free adjustments of control variables.

42 ENGINEERING↗

Whistler Chorus Amplification in the Magnetosphere: The Nonlinear Free‐Electron Laser Model and the Ginzburg‐Landau Equation

We present a novel nonlinear model for whistler-mode chorus amplification based on the free-electron laser (FEL) mechanism. First, we derive the nonlinear collective variable equations for the whistler-electron interaction. Consistent with in situ satellite observations, these equations predict that a small seed wave can undergo exponential growth, reaching a peak of a few hundred picoteslas after a few milliseconds, followed by millisecond timescale amplitude modulations. Next, we show that when one accounts for multiple wave frequencies and wave spatial variations, the amplitude and phase of the whistler wave can be described by the Ginzburg-Landau equation (GLE), providing a framework for the investigation of solitary wave behavior of chorus modes. These findings enhance our understanding of wave-particle interactions and space weather in the Van Allen radiation belts, deepen the connection between whistler-electron dynamics and FELs, and reveal a novel connection between whistler-mode chorus and the GLE.

Ginsburg-Landau equation↗

Numerical investigation of vorticity and bubble clustering in an air entraining hydraulic jump

In this paper, a high resolution computational fluid dynamics model is used to simulate a steady air entraining laboratory scale hydraulic jump. A detailed examination of shear layer instabilities reveals the dynamic relationship between spanwise vortices, free surface fluctuations, and air–water spatial patterns. Spanwise vortices generated at the toe roll-up under a variable depth roller, creating large free surface fluctuations through high velocity water ejections in the roller. The mean shear layer elevation and free surface elevations periodically alternate between positive and negative correlation throughout the roller, driven by dynamic vortex transport. Vortices descending towards the lower wall create an upwelling of non-bubbly fluid into the shear layer that contributes to regions of decreased bubble concentration between vortices. The position of a strong shear layer at the location of maximum air entrainment, directly above the jump toe, leads to highly aerated vortices that influence bubble behavior. Bubbles breakup quickly after entrainment at the toe and bubble clusters are observed most frequently below and at the end of the roller where bubble breakup and energy dissipation are diminished. Finally, the dominant separation angle of clustered bubbles is independent of downstream distance and aligns closely with the direction of initial shear, suggesting bubble clustering is a remnant of bubble breakup.

13 HYDRO ENERGY↗