Search NASA⌕ Search

SEARCH · Search NASA

Results for “vehicle performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Baseline tests of the EPC Hummingbird electric passenger vehicle

The rear-mounted internal combustion engine in a four-passenger Volkswagen Thing was replaced with an electric motor made by modifying an aircraft generator and powered by 12 heavy-duty, lead-acid battery modules. Vehicle performance tests were conducted to measure vehicle maximum speed, range at constant speed, range over stop-and-go driving schedules, maximum acceleration, gradeability limit, road energy consumption, road power, indicated energy consumption, braking capability, battery charger efficiency, and battery characteristics. Test results are presented in tables and charts.

Slavik, R. J.↗
NASA NTRS1984

Benefits of high aerodynamic efficiency to orbital transfer vehicles

The benefits and costs of high aerodynamic efficiency on aeroassisted orbital transfer vehicles (AOTV) are analyzed. Results show that a high lift to drag (L/D) AOTV can achieve significant velocity savings relative to low L/D aerobraked OTV's when traveling round trip between low Earth orbits (LEO) and alternate orbits as high as geosynchronous Earth orbit (GEO). Trajectory analysis is used to show the impact of thermal protection system technology and the importance of lift loading coefficient on vehicle performance. The possible improvements in AOTV subsystem technologies are assessed and their impact on vehicle inert weight and performance noted. Finally, the performance of high L/D AOTV concepts is compared with the performances of low L/D aeroassisted and all propulsive OTV concepts to assess the benefits of aerodynamic efficiency on this class of vehicle.

Andrews, D. G.↗
NASA NTRS2004

Mars Exploration Rovers Launch Performance and TCM-1 Maneuver Design

The Mars Exploration Rover (MER) project successfully landed two identical rovers on Mars in order to remotely conduct geologic investigations, including characterization of rocks and soils that may hold clues to past water activity. Two landing sites, Gusev crater and Meridiani Planum, were selected out of nearly 200 candidate sites after balancing science returns and flight system engineering and safety. Precise trajectory targeting and control was necessary to achieve the atmospheric entry requirements for the selected landing sites within the flight system constraints. This paper discusses the expected and achieved launch vehicle performance and the impacts of that performance on the first Trajectory Correction Maneuver (TCM-1) while maintaining targeting flexibility in accommodating additional project concerns about landing site safety and possible in-flight retargeting to alternate landing sites.

Trajectory Correction Maneuvers (TCMs)↗
NASA NTRS1982

Improved transistorized AC motor controller for battery powered urban electric passenger vehicles

An ac motor controller for an induction motor electric vehicle drive system was designed, fabricated, tested, evaluated, and cost analyzed. A vehicle performance analysis was done to establish the vehicle tractive effort-speed requirements. These requirements were then converted into a set of ac motor and ac controller requirements. The power inverter is a three-phase bridge using power Darlington transistors. The induction motor was optimized for use with an inverter power source. The drive system has a constant torque output to base motor speed and a constant horsepower output to maximum speed. A gear shifting transmission is not required. The ac controller was scaled from the base 20 hp (41 hp peak) at 108 volts dec to an expanded horsepower and battery voltage range. Motor reversal was accomplished by electronic reversal of the inverter phase sequence. The ac controller can also be used as a boost chopper battery charger. The drive system was tested on a dynamometer and results are presented. The current-controlled pulse width modulation control scheme yielded improved motor current waveforms. The ac controller favors a higher system voltage.

Peak, S. C.↗
NASA NTRS2007

Impact to Space Shuttle Vehicle Trajectory on Day of Launch from change in Low Frequency Winds

The National Aeronautics and Space Administration's (NASA) Space Shuttle utilizes atmospheric winds on day of launch to develop throttle and steering commands to best optimize vehicle performance while keeping structural loading on the vehicle within limits. The steering commands and resultant trajectory are influenced by both the high and low frequency component of the wind. However, the low frequency component has a greater effect on the ascent design. Change in the low frequency wind content from the time of trajectory design until launch can induce excessive loading on the vehicle. Wind change limits have been derived to protect from launching in an environment where these temporal changes occur. Process of developing wind change limits are discussed followed by an observational study of temporal wind change in low frequency wind profiles at the NASA's Kennedy Space Center area are presented.

Decker, Ryan K.↗
NASA NTRS1977

The application of integral performance criteria to the analysis of discrete maneuvers in a driving simulator

The influence of vehicle transient response characteristics on driver-vehicle performance in discrete maneuvers as measured by integral performance criteria was investigated. A group of eight ordinary drivers was presented with a series of eight vehicle transfer function configurations in a driving simulator. Performance in two discrete maneuvers was analyzed by means of integral performance criteria. Results are presented.

Repa, B. S.↗
NASA NTRS1976

Guidelines for advanced manned space vehicle program, June 1960

A very broad mission objective was established; i.e., manned circumlunar flight and return to earth. It is implicit that the Saturn will be the primary propulsion system for this mission. The following attempts to: (1) define the objective so as to achieve as much capability in the vehicle as possible; (2) draw on Mercury experience to provide broad guidelines for vehicle performance and safety; (3) provide flexibility in the vehicle capability in the event that the manned lunar mission is proved to be subject to unacceptable risk in the target time period; and (4) indicate problem areas where work appears to be particularly needed.

Gilruth, R. R.↗
NASA NTRS2004

Integrated Mode Choice, Small Aircraft Demand, and Airport Operations Model User's Guide

A mode choice model that generates on-demand air travel forecasts at a set of GA airports based on changes in economic characteristics, vehicle performance characteristics such as speed and cost, and demographic trends has been integrated with a model to generate itinerate aircraft operations by airplane category at a set of 3227 airports. Numerous intermediate outputs can be generated, such as the number of additional trips diverted from automobiles and schedule air by the improved performance and cost of on-demand air vehicles. The total number of transported passenger miles that are diverted is also available. From these results the number of new aircraft to service the increased demand can be calculated. Output from the models discussed is in the format to generate the origin and destination traffic flow between the 3227 airports based on solutions to a gravity model.

Yackovetsky, Robert E.↗
NASA NTRS1989

Wave combustors for trans-atmospheric vehicles

A performance analysis is given of a conceptual transatmospheric vehicle (TAV). The TAV is powered by a an oblique detonation wave engine (ODWE). The ODWE is an airbreathing hypersonic propulsion system which utilizes shock and detonation waves to enhance fuel-air mixing and combustion in supersonic flow. In this wave combustor concept, an oblique shock wave in the combustor can act as a flameholder by increasing the pressure and temperature of the air-fuel mixture, thereby decreasing the ignition delay. If the oblique shock is sufficiently strong, then the combustion front and the shock wave can couple into a detonation wave. In this case, combustion occurs almost instantaneously in a thin zone behind the wave front. The result is a shorter lighter engine compared to the scramjet. The ODWE-powered hypersonic vehicle performance is compared to that of a scramjet-powered vehicle. Among the results outlined, it is found that the ODWE trades a better engine performance above Mach 15 for a lower performance below Mach 15. The overall higher performance of the ODWE results in a 51,000-lb weight savings and a higher payload weight fraction of approximately 12 percent.

Menees, Gene P.↗
NASA NTRS1977

Space Shuttle Plume and Plume Impingement Study

The extent of the influence of the propulsion system exhaust plumes on the vehicle performance and control characteristics is a complex function of vehicle geometry, propulsion system geometry, engine operating conditions and vehicle flight trajectory were investigated. Analytical support of the plume technology test program was directed at the two latter problem areas: (1) definition of the full-scale exhaust plume characteristics, (2) application of appropriate similarity parameters; and (3) analysis of wind tunnel test data. Verification of the two-phase plume and plume impingement models was directed toward the definition of the full-scale exhaust plume characteristics and the separation motor impingement problem.

Tevepaugh, J. A.↗
NASA NTRS1977

Baseline tests of the C. H. Waterman DAF electric passenger vehicle

An electric vehicle was tested as part of an Energy Research Development Administration (ERDA) project to characterize the state-of-the-art of electric vehicles. The Waterman vehicle performance test results are presented in this report. The vehicle is a converted four-passenger DAF 46 sedan. It is powered by sixteen 6-volt traction batteries through a three-step contactor controller actuated by a foot throttle to change the voltage applied to the 6.7 kW motor. The braking system is a conventional hydraulic braking system.

Sargent, N. B.↗
NASA NTRS1988

Optimal cooperative time-fixed impulsive rendezvous

A method has been developed for determining optimal, i.e., minimum fuel, trajectories for the fixed-time cooperative rendezvous of two spacecraft. The method presently assumes that the vehicles perform a total of three impulsive maneuvers with each vehicle being active, that is, making at least one maneuver. The cost of a feasible 'reference' trajectory is improved by an optimizer which uses an analytical gradient developed using primer vector theory and a new solution for the optimal terminal (rendezvous) maneuver. Results are presented for a large number of cases in which the initial orbits of both vehicles are circular but in which the initial positions of the vehicles and the allotted time for rendezvous are varied. In general, the cost of the cooperative rendezvous is less than that of rendezvous with one vehicle passive. Further improvement in cost may be obtained in the future when additional, i.e., midcourse, impulses are allowed and inserted as indicated for some cases by the primer vector histories which are generated by the program.

Mirfakhraie, Koorosh↗
NASA NTRS2002

HfB2-SiC Materials for Sharp Leading Edges

Future reentry vehicles will need better maneuverability to improve safety and performance. Vehicles with sharp leading edges, as opposed to the blunt nose and leading edges on the current space shuttle, can provide improved lift-to-drag and thus improved maneuverability. Materials capable of operating at temperatures in excess of 2000 C are required. Ultrahigh temperature ceramics (UHTCs) are one class of material being investigated for this application. These materials are diborides of hafnium or zirconium with a second phase of sic. The benefits of using these materials will be discussed as developments in the processing of HfB2/SiC.

Johnson, Sylvia M.↗
NASA NTRS1990

Vehicle processing operations database

The Vehicle Processing Operations Data base (VPOD) has been designed and constructed to enable the collection and preliminary analysis of data relative to the processing of planetary exploration vehicles in low Earth orbit. VPOD has the capability to hierarchically store the events, assemblies, and equipment data needed for performing vehicle processing analysis, to whatever level of detail available. This permits some analysis to be performed even during the very early phases of vehicle and mission design. As more data about the events, assemblies, or equipment become available, the analysis can then be refined using the increased level of detail. VPOD output is based on a mission defined by selecting from the VPOD Events data base the events that are required to perform the desired tasks. The outputs available include total crew time, crew skill requirements, equipment needed, assemblies worked per event, to any available level of detail. The VPOD design is structured to interface with an operations simulation capability which is currently in the requirements definition phase. The simulator will use information from the VPOD to perform operations analysis for missions being conducted in low Earth orbit. VPOD information, along with information from the science missions operations data base and a Space Station configuration data base, will be used by the simulator to provide a capability to study total system operations and resources requirements.

Ganoe, George G.↗
NASA NTRS1994

Effect of Aeropropulsive Interactions and Design Sensitivities on Optimal Hypersonic Ascent Trajectories

In this paper, trajectory optimization is used as a tool to better understand the performance characteristics of hypersonic Single-Stage-To-Orbit(SSTO) vehicle exhibiting significant aeropropulsive interactions. The energy state approximation is used to determine a straightforward method of determining the scramjet-powered phase of the mission. The energy state method is then used to generate fuel-optimal trajectory results over this portion of the mission for a vehicle configuration of this class. The fuel-optimal unconstrained trajectory is marked by low-altitude acceleration, while a dynamic pressure-constrained trajectory is seen to ride the dynamic pressure constraint for the entire scramjet mission phase. The significance of aeropropulsive interactions in affecting vehicle performance is also investigated.

Lovell, T. Alan↗
NASA NTRS1983

Optimization methods applied to hybrid vehicle design

The use of optimization methods as an effective design tool in the design of hybrid vehicle propulsion systems is demonstrated. Optimization techniques were used to select values for three design parameters (battery weight, heat engine power rating and power split between the two on-board energy sources) such that various measures of vehicle performance (acquisition cost, life cycle cost and petroleum consumption) were optimized. The apporach produced designs which were often significant improvements over hybrid designs already reported on in the literature. The principal conclusions are as follows. First, it was found that the strategy used to split the required power between the two on-board energy sources can have a significant effect on life cycle cost and petroleum consumption. Second, the optimization program should be constructed so that performance measures and design variables can be easily changed. Third, the vehicle simulation program has a significant effect on the computer run time of the overall optimization program; run time can be significantly reduced by proper design of the types of trips the vehicle takes in a one year period. Fourth, care must be taken in designing the cost and constraint expressions which are used in the optimization so that they are relatively smooth functions of the design variables. Fifth, proper handling of constraints on battery weight and heat engine rating, variables which must be large enough to meet power demands, is particularly important for the success of an optimization study. Finally, the principal conclusion is that optimization methods provide a practical tool for carrying out the design of a hybrid vehicle propulsion system.

Donoghue, J. F.↗