Electronic processing in the vertical temperature profile radiometer
IR scanning vertical temperature profile radiometer for Itos meteorological satellites, describing electronic signal processing
Zink, D.↗
SEARCH · Search NASA
Results for “vertical profiling”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Computer programs for generation and evaluation of near-optimum vertical flight profiles
Two extensive computer programs were developed. The first, called OPTIM, generates a reference near-optimum vertical profile, and it contains control options so that the effects of various flight constraints on cost performance can be examined. The second, called TRAGEN, is used to simulate an aircraft flying along an optimum or any other vertical reference profile. TRAGEN is used to verify OPTIM's output, examine the effects of uncertainty in the values of parameters (such as prevailing wind) which govern the optimum profile, or compare the cost performance of profiles generated by different techniques. A general description of these programs, the efforts to add special features to them, and sample results of their usage are presented.
Sorensen, J. A.↗
Importance of a Priori Vertical Ozone Profiles for TEMPO Air Quality Retrievals
Ozone (O3) is a toxic pollutant which plays a major role in air quality. Typically, monitoring of surface air quality and O3 mixing ratios is conducted using in situ measurement networks. This is partially due to high-quality information related to air quality being limited from space-borne platforms due to coarse spatial resolution, limited temporal frequency, and minimal sensitivity to lower tropospheric and surface-level O3. The Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite is designed to address the limitations of current space-based platforms and to improve our ability to monitor North American air quality. TEMPO will provide hourly data of total column and vertical profiles of O3 with high spatial resolution to be used as a near-real-time air quality product. TEMPO O3 retrievals will apply the Smithsonian Astrophysical Observatory profile algorithm developed based on work from GOME (Global Ozone Monitoring Experiment), GOME-2, and OMI (Ozone Monitoring Instrument). This algorithm is suggested to use a priori O3 profile information from a climatological data-base developed from long-term ozone-sonde measurements (tropopause-based (TB-Clim) O3 climatology). This study evaluates the TB-Clim dataset and model simulated O3 profiles, which could potentially serve as a priori O3 profile information in TEMPO retrievals, from near-real-time data assimilation model products (NASA GMAO's (Global Modeling and Assimilation Office) operational GEOS-5 (Goddard Earth Observing System, Version 5) FP (Forecast Products) model and reanalysis data from MERRA2 (Modern-Era Retrospective analysis for Research and Applications, Version 2)) and a full chemical transport model (CTM), GEOS-Chem. In this study, vertical profile products are evaluated with surface (0-2 kilometers) and tropospheric (0-10 kilometers) TOLNet (Tropospheric Ozone Lidar Network) observations and the theoretical impact of individual a priori profile sources on the accuracy of TEMPO O3 retrievals in the troposphere and at the surface are presented. Results indicate that while the TB-Clim climatological dataset can replicate seasonally-averaged tropospheric O3 profiles, model-simulated profiles from a full CTM resulted in more accurate tropospheric and surface-level O3 retrievals from TEMPO when compared to hourly and daily-averaged TOLNet observations. Furthermore, it is shown that when large surface O3 mixing ratios are observed, TEMPO retrieval values at the surface are most accurate when applying CTM a priori profile information compared to all other data products.
Priori↗
Retrieval of Vertical LAI Profiles Over Tropical Rain Forests using Waveform Lidar at La Selva, Costa Rica
This study explores the potential of waveform lidar in mapping the vertical and spatial distributions of leaf area index (LAI) over the tropical rain forest of La Selva Biological Station in Costa Rica. Vertical profiles of LAI were derived at 0.3 m height intervals from the Laser Vegetation Imaging Sensor (LVIS) data using the Geometric Optical and Radiative Transfer (GORT) model. Cumulative LAI profiles obtained from LVIS were validated with data from 55 ground to canopy vertical transects using a modular field tower to destructively sample all vegetation. Our results showed moderate agreement between lidar and field derived LAI (r2=0.42, RMSE=1.91, bias=−0.32), which further improved when differences between lidar and tower footprint scales (r2=0.50, RMSE=1.79, bias=0.27) and distance of field tower from lidar footprint center (r2=0.63, RMSE=1.36, bias=0.0) were accounted for. Next, we mapped the spatial distribution of total LAI across the landscape and analyzed LAI variations over different land cover types. Mean values of total LAI were 1.74, 5.20, 5.41 and 5.62 over open pasture, secondary forests, regeneration forests after selective-logging and old-growth forests respectively. Lastly, we evaluated the sensitivities of our LAI retrieval model to variations in canopy/ground reflectance ratio and to waveform noise such as induced by topographic slopes. We found for both, that the effects were not significant for moderate LAI values (about 4). However model derivations of LAI might be inaccurate in areas of high-slope and high LAI (about 8) if ground return energies are low. This research suggests that large footprint waveform lidar can provide accurate vertical LAI profile estimates that do not saturate even at the high LAI levels in tropical rain forests and may be a useful tool for understanding the light transmittance within these canopies.
Tang, Hao↗
Vertical ozone profile results from the Nimbus-4 BUV data
A seven year data set which consists of both total ozone and ozone vertical profiles has been derived from the Nimbus-4 Backscatter Ultraviolet (BUV) experiment. The BUV experiment measures the earth's backscattered solar radiance at 12 wavelengths in the Hartley-Huggins band. The shortest 8 bands are used to determine the vertical ozone profile. The longest four bands are used to determine the total ozone. The present investigation provides a review of the major characteristics of the instrument performance and ozone results during the seven year period of the data set. Attention is given to the data coverage in time and space, the major areas of nonhomogeneous coverage, adjustments made to the basic instrument radiances, long-term trends in the radiances, rocket and balloon measurements, and problems associated with the validation of the satellite data set.
Fleig, A. J.↗
Seasonal and latitudinal variations of the average surface temperature and vertical temperature profile on Mars.
Seasonal and latitudinal variations of average surface temperature and vertical profile of atmospheric temperature on Mars based on thermal equilibrium model
Mariano, J.↗
The Smoke-Trail Method for Obtaining Detailed Measurements of the Vertical Wind Profile for Application to Missile-Dynamic-Response Problems
Detailed measurements of the vertical profile of the wind are urgently needed f o r studies of the response of rising missiles, but conventional wind-measuring systems cannot provide the accuracy and detail required over the necessary range of altitudes. A method is presented for obtaining a detailed, accurate profile over a large altitude range. The method utilizes photogrammetric measurement of successive positions of the t rail of an ascending rocket. Construction of a rocketborne smoke generator is discussed and the photography, film reading, and data-reduction procedures are described. The accuracy of the method i s examined and error equations are derived. Finally, some examples of wind profiles measured by this method are shown, and their implications for missile response are indicated.
Henry, Robert M.↗
Vertical Distribution of Dust and Water Ice Aerosols from CRISM Limb-geometry Observations
[1] Near-infrared spectra taken in a limb-viewing geometry by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) on board the Mars Reconnaissance Orbiter provide a useful tool for probing atmospheric structure. Specifically, the observed radiance as a function of wavelength and height above the limb enables the vertical distribution of both dust and water ice aerosols to be retrieved. More than a dozen sets of CRISM limb observations have been taken so far providing pole-to-pole cross sections, spanning more than a full Martian year. Radiative transfer modeling is used to model the observations taking into account multiple scattering from aerosols and the spherical geometry of the limb observations. Both dust and water ice vertical profiles often show a significant vertical structure for nearly all seasons and latitudes that is not consistent with the well-mixed or Conrath-v assumptions that have often been used in the past for describing aerosol vertical profiles for retrieval and modeling purposes. Significant variations are seen in the retrieved vertical profiles of dust and water ice aerosol as a function of season. Dust typically extends to higher altitudes (approx. 40-50km) during the perihelion season than during the aphelion season (<20km), and the Hellas region consistently shows more dust mixed to higher altitudes than other locations. Detached water ice clouds are common, and water ice aerosols are observed to cap the dust layer in all seasons.
Atmosphere↗
Studies of vertical wind profiles at Cape Kennedy, Florida Final report
Vertical wind profiles spectral analysis and numerical wind forecasts at Cape Kennedy
Drexhage, K. A.↗
Ozone height profiles using laser heterodyne radiometer
The monitoring of vertical profiles of ozone and related minor constituents in the atmosphere are of great significance to understanding the complex interaction between atmospheric dynamics, chemistry and radiation budget. An ultra high spectral resolution tunable CO2 laser heterodyne radiometer has been designed, developed and set up at the National Physical Laboratory, New Delhi to obtain vertical profiles of various minor constituents the characteristic absorption lines in 9 to 11 micron spectral range. Due to its high spectral resolution the lines can be resolved completely and data obtained are inverted to get vertical profiles using an inversion technique developed by the author. In the present communication the salient features of the laser heterodyne system and the results obtained are discussed in detail.
Jain, S. L.↗
Geoscience Laser Altimeter System (GLAS) for the ICESat Mission
The Geoscience Laser Altimeter System (GLAS) is a new generation lidar and is the primary science payload for NASA's ICESat Mission. The GLAS design combines a 10 cm precision surface lidar with a sensitive dual wavelength cloud and aerosol lidar. GLAS will precisely measure the heights of the Earth's polar ice sheets, establish a grid of accurate height profiles of the Earth's land topography, and profile the vertical distribution of clouds and aerosols on a global scale. GLAS will be integrated onto a small spacecraft built by Ball Aerospace, and will be launched into a polar orbit with a 590-630 km altitude at an inclination of 94 degrees. ICESat is is currently planned to launch in winter 2002/03 and GLAS is designed to operate continuously in space for a minimum of 3 years. GLAS will measure the vertical distance from orbit to the Earth's surface with pulses from a ND:YAG laser at a 40 Hz rate. Each 6 nsec wide 1064 nm laser pulse is used to produce a single range measurement. On the surface, the laser footprints have 66 m diameter and approx. 170 m center-center spacings. The GLAS receiver uses a I m diameter telescope to detect laser backscatter and a Si APD to detect the 1064 nm signals. The detector's output is sampled by a digital ranging receiver, which records each transmitted pulse and surface echo waveform with 1 nsec (15 cm) resolution. Each echo pulse is digitized and is reported to ground with a record length of from 200 to 544 samples, depending on the spacecraft's location . The GLAS location and epoch times are measured by a precision GPS receiver carried on the ICESat spacecraft. Initial processing of the echo waveforms within GLAS permits discrimination between cloud and surface echoes for selecting appropriate waveform samples. This selection is guided by an on-board DEM which is used to set the boundaries for the echo pulse search algorithm. Subsequent ground-based echo pulse analysis, along with GPS-based clock frequency estimates, permit final determination of the range to the surface, degree of pulse spreading, and vertical distribution of any vegetation illuminated by the laser. Accurate knowledge of the laser beam's pointing angle is needed to prevent height biases when measuring over tilted surfaces, such as near the boundaries of ice sheets. For surfaces with 2 deg. slopes, knowledge of pointing angle of the beam's centroid angle to better than 10 urad is needed. GLAS uses a stellar reference system (SRS) to measure the pointing angle of each laser firing relative to inertial space. The SRS uses a high precision star camera oriented toward local zenith and a gyroscope to determine the inertial orientation of the SRS optical bench. The far field pattern of each laser is measured pulse relative to the star camera with a laser reference system (LRS). GLAS will also measure the vertical distributions of clouds and aerosols by recording the vertical profiles of laser pulse backscatter at both 1064 and 532 nm. The 1064 rim measurements use the Si APD detector and will be used to measure the height and echo pulse shape from thicker clouds. The lidar receiver at 532 nm uses a narrow bandwidth etalon filter and highly sensitive photon counting detectors. The 532 nm backscatter profiles will be used to measure the vertical extent of thinner clouds and the atmospheric boundary layer. The GLAS instrument component development is complete and the instrument is undergoing final testing and qualification at NASA-Goddard. The GLAS "as-built" characteristics and its expected measurement performance will be discussed.
Abshire, James B.↗
Advancing Tunnel Detection Via Vertical Acoustic Profiling
This study demonstrates that placing an acoustic source at depth significantly enhances the detection of tunnels. By adapting the methodology of vertical seismic profiling to acoustic-range frequencies, we introduce a novel approach for tunnel detection. To our knowledge, this report documents the first application of this technique. The field study was conducted on a cleared site at the Oak Ridge National Laboratory; the subsurface was clay. A series of vertical shafts were bored immediately before and after the placement of a 40 ft long, 3 ft diameter steel pipe located 10 ft below the surface. Acoustic signatures were produced at various depths up to 30 ft and an array of surface geophones was used to collect the resulting signals. The innovation lies in using subsurface acoustic signatures to better enable the collection of wide-angle diffracted waves by surface geophones. These diffracted waves appear as subharmonic frequencies of the source signal and are recorded by a surface geophone array. While the concept draws from vertical seismic profiling used in oil and gas exploration, a key distinguishing feature is the use of acoustic frequencies, which are necessary for detecting small subsurface features. The findings have important implications. Critical information pertaining to diffracted source signals are not measured by current state-of-the-art methods. Although this study confirms enhanced detectability, accurate localization and imaging will require additional research. Future work should focus on leveraging diffracted-wave strength and time delays to enable full imaging and characterization.
47 OTHER INSTRUMENTATION↗
Meteorological applications of remote sensing from satellites
Current and promising future contributions to meteorology from satellite-borne sensors are discussed, with emphasis on performance and the limitations thereto. The discussion covers (1) synoptic meteorology, where satellite observations of clouds provide measures of winds, cyclogenesis, and rainfall estimation; (2) atmospheric profiling, wherein vertical profiles of temperature, humidity, and certain gaseous constituents are provided; (3) radiation budget or the energy exchange between the earth and the space-sun environment; and (4) surface features of importance to meteorology-temperature, soil moisture, and sea ice coverage.
Yates, H. W.↗
Large-scale vertical motion calculations in the AVE IV Experiment
Using 3- and 6-h consecutive rawinsonde and surface data from NASA's AVE IV Experiment, synoptic-scale vertical motion calculations are made using an adiabatic technique and three variations of the kinematic technique. Both subjective and objective comparisons in space and time between the sign and magnitude of the computed vertical velocities and precipitation intensities are made. These comparisons are conducted to determine which method would consistently produce realistic magnitudes, patterns, and vertical profiles of vertical velocity essential to the diagnostic study of the relationship between severe convective storms and their environment in AVE IV. The kinematic method, adjusted to the adiabatic value at 100 mb, proved to produce the best overall vertical velocities.
Wilson, G. S.↗
Microphysical properties of the November 26 cirrus cloud retrieved by Doppler radar/IR radiometer technique
Gaining information about cirrus cloud microphysics requires development of remote sensing techniques. In an earlier paper. Matrosov et al. (1992) proposed a method to estimate ice water path (IWP) (i.e., vertically integrated ice mass content IMC) and characteristic particle size averaged through the cloud from combined groundbased measurements of radar reflectivities and IR brightness temperatures of the downwelling thermal radiation in the transparency region of 10-12 mu m. For some applications, the vertically averaged characteristic particle sizes and IWP could be the appropriate information to use. However, vertical profiles of cloud microphysical parameters can provide a better understanding of cloud structure and development. Here we describe a further development of the previous method by Matrosov et al. (1992) for retrieving vertical profiles of cirrus particle sizes and IMC rather than their vertically averaged values. In addition to measurements of radar reflectivities, the measurements of Doppler velocities are used in the new method. This provides us with two vertical profiles of measurements to infer two vertical profiles of unknowns, i.e., particle characteristic sizes and IMC. Simultaneous measurements of the IR brightness temperatures are still needed to resolve an ambiguity in particle size-fall velocity relationships.
Matrosov, Sergey Y.↗
Analysis of ETMS Data Quality for Traffic Flow Management Decisions
The data needed for air traffic flow management decision support tools is provided by the Enhanced Traffic Management System (ETMS). This includes both the tools that are in current use and the ones being developed for future deployment. Since the quality of decision support provided by all these tools will be influenced by the quality of the input ETMS data, an assessment of ETMS data quality is needed. Motivated by this desire, ETMS data quality is examined in this paper in terms of the unavailability of flight plans, deviation from the filed flight plans, departure delays, altitude errors and track data drops. Although many of these data quality issues are not new, little is known about their extent. A goal of this paper is to document the magnitude of data quality issues supported by numerical analysis of ETMS data. Guided by this goal, ETMS data for a 24-hour period were processed to determine the number of aircraft with missing flight plan messages at any given instant of time. Results are presented for aircraft above 18,000 feet altitude and also at all altitudes. Since deviation from filed flight plan is also a major cause of trajectory-modeling errors, statistics of deviations are presented. Errors in proposed departure times and ETMS-generated vertical profiles are also shown. A method for conditioning the vertical profiles for improving demand prediction accuracy is described. Graphs of actual sector counts obtained using these vertical profiles are compared with those obtained using the Host data for sectors in the Fort Worth Center to demonstrate the benefit of preprocessing. Finally, results are presented to quantify the extent of data drops. A method for propagating track positions during ETMS data drops is also described.
Chatterji, Gano B.↗
Retrieval of vertical moisture profiles with microwave radiometry
A statistical correlation technique is applied to the retrieval of vertical moisture profiles from downlooking radiometric measurements of atmospheric radiation at microwave wavelengths. Only an optimum subset of available radiometer channels is selected for estimating water vapor at specific pressure levels. To test its validity the algorithm was applied, in a numerical experiment, to 50 independent tropical radiosondes over a sea surface. It was also used to retrieve continuous sequences of atmospheric moisture profiles from a set of data obtained with a 4-channel microwave radiometer carried aboard an aircraft over a land surface.
Kakar, R. K.↗
An algorithm to estimate the heating budget from vertical hydrometeor profiles
A simple algorithm to estimate the latent heating of cloud systems from their vertical hydrometeor profiles is proposed. The derivation as well as the validation of the algorithm is based on output generated by a nonhydrostatic cloud model with parameterized microphysical processes. Mature and decaying stages of a GATE squall-type convective system have been tested. The algorithm-derived heating budget is in reasonable agreement with the budget predicted by the cloud model. The input to the proposed algoritm can be obtained from either a rain retrieval technique based on information from multichannel passive microwave signals or a kinematic cloud model based on information from Doppler radar wind fields and radar reflectivity patterns. Such an application would have significant implications for spaceborne remote sensing and the large-scale weather prediction data assimilation problem.
Tao, Wei-Kuo↗