Search NASA⌕ Search

SEARCH · Search NASA

Results for “vertical stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

A linear thermal stability analysis for the vertical structure of alpha model accretion disks

The linear equations that describe the thermal stability of the convective and radiative vertical structure of an alpha model accretion disk are derived. For a specific model chosen to be representative of a dwarf nova disk, it is found that the eigenfunction for the temperature shows large excursions in the zone of partial ionization, but that the eigenfunctions for the unstable fundamental mode perturbations of the vertical distance and flux are nearly constant over the vertical extent of the disk. The growth of any instability is thus nearly homologous and the stability criteria derived for vertically averaged structures represent an adequate approximation.

Saio, Hideyuki↗
DOE OSTI2023

Variations in boundary layer stability across Antarctica: a comparison between coastal and interior sites

The range of boundary layer stability profiles, from the surface to 500 m a.g.l. (above ground level), present in radiosonde observations from two continental-interior (South Pole Station and Dome Concordia Station) and three coastal (McMurdo Station, Georg von Neumayer Station III, and Syowa Station) Antarctic sites, is examined using the self-organizing maps (SOMs) neural network algorithm. A wide range of potential temperature profiles is revealed, from shallow boundary layers with strong near-surface stability to deeper boundary layers with weaker or near-neutral stability, as well as profiles with weaker near-surface stability and enhanced stability aloft, above the boundary layer. Boundary layer regimes were defined based on the range of profiles revealed by the SOM analysis; 20 boundary layer regimes were identified to account for differences in stability near the surface as well as above the boundary layer. Strong, very strong, or extremely strong stability, with vertical potential temperature gradients of 5 to in excess of 30 K per 100 m, occurred more than 80 % of the time at South Pole and Dome Concordia in the winter. Weaker stability was found in the winter at the coastal sites, with moderate and strong stability (vertical potential temperature gradients of 1.75 to 15 K per 100 m) occurring 70 % to 85 % of the time. Even in the summer, moderate and strong stability is found across all five sites, either immediately near the surface or aloft, just above the boundary layer. While the mean boundary layer height at the continental-interior sites was found to be approximately 50 m, the mean boundary layer height at the coastal sites was deeper, around 110 m. Further, a commonly described two-stability-regime system in the Arctic associated with clear or cloudy conditions was applied to the 20 boundary layer regimes identified in this study to understand if the two-regime behavior is also observed in the Antarctic. It was found that moderate and strong stability occur more often with clear- than cloudy-sky conditions, but weaker stability regimes occur almost equally for clear and cloudy conditions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1991

Buffet induced structural/flight-control system interaction of the X-29A aircraft

High angle-of-attack flight regime research is currently being conducted for modern fighter aircraft at the NASA Ames Research Center's Dryden Flight Research Facility. This flight regime provides enhanced maneuverability to fighter pilots in combat situations. Flight research data are being acquired to compare and validate advanced computational fluid dynamic solutions and wind-tunnel models. High angle-of-attack flight creates unique aerodynamic phenomena including wing rock and buffet on the airframe. These phenomena increase the level of excitation of the structural modes, especially on the vertical and horizontal stabilizers. With high gain digital flight-control systems, this structural response may result in an aeroservoelastic interaction. A structural interaction on the X-29A aircraft was observed during high angle-of-attack flight testing. The roll and yaw rate gyros sensed the aircraft's structural modes at 11, 13, and 16 Hz. The rate gyro output signals were then amplified through the flight-control laws and sent as commands to the flaperons and rudder. The flight data indicated that as the angle of attack increased, the amplitude of the buffet on the vertical stabilizer increased, which resulted in more excitation to the structural modes. The flight-control system sensors and command signals showed this increase in modal power at the structural frequencies up to a 30 degree angle-of-attack. Beyond a 30 degree angle-of-attack, the vertical stabilizer response, the feedback sensor amplitude, and control surface command signal amplitude remained relatively constant. Data are presented that show the increased modal power in the aircraft structural accelerometers, the feedback sensors, and the command signals as a function of angle of attack. This structural interaction is traced from the aerodynamic buffet to the flight-control surfaces.

Voracek, David F.↗
NASA NTRS1994

Cyclogenesis in a saturated environment

The dynamics of baroclinic wave growth in a saturated environment is examined using linear and nonlinear models employing a parameterization of latent heat release that assumes all rising air is saturated, and saturation equivalent potential temperature is conserved on ascent. Piecewise potential vorticity (PV) diagnostics are used to interpret the results. When the stability to vertical displacements in saturated air is allowed to increase with height, as it must in an atmosphere with a constant, positive lapse rate of potential temperature, the growth rates of the most unstable modes of the Eady problem grow only marginally faster than the modes of the dry problem. The vertical variation of moist static stability produces a gradient of moist potential vorticity in the rising air, eliminating the short-wave cutoff present in the dry Eady problem. The destabilization of the short waves is shown to be associated with the interaction between surface potential temperature anomalies and diabatically generated lower-tropospheric potential vorticity anomalies. Nonlinear primitive equation simulations, starting from normal-mode initial conditions, show that while the dry wave grows at nearly the linear growth rate until maximum amplitude is reached, the moist wave grows significantly faster than the linear growth rate at finite amplitude. This enhanced growth is associated with the rapid amplification of a mesoscale PV anomaly generated by latent heat release at the warm front. The rapid amplification of the surface cyclone results from the superposition of the circulation associated with this misoscale PV anomaly upon the circulation associated with the surface and upper boundary potential temperature anomalies. Additional integrations with finite-amplitude initial conditions more typical of atmospheric conditions exhibit similar behavior. It is suggested that many of the rapid cyclogenesis events that occur as upper-troposheric PV anomalies cross the east coasts of continents may arise from the rapid generation of PV anomalies by condensational heating in the moist maritime lower troposphere.

Whitaker, Jeffrey S.↗
DOE OSTI2026

Avoidance of disruptions on KSTAR due to vertical displacement events via novel real-time stability assessment

Disruption avoidance via the DECAF approach has been achieved on KSTAR using a novel real-time vertical stability assessment and a multiactuator feedback control strategy. The development of disruption avoidance strategies with reactor-relevant reliability is an urgent activity, enabling future fusion power plants. The stability metric employed is based on a new formulation of a vertical force gradient balance metric evaluated across the poloidal cross section of the plasma, with parameters tuned using historical data. Evaluation of this metric on a validation set of 400 recent KSTAR shots indicates >82% of Vertical displacement events can be avoided via feedback control. Essential to its calculation is the two-dimensional toroidal current density distribution in the plasma. Measurement of this profile faster than fully-converged equilibrium reconstructions can deliver is found to improve forecaster performance and is achieved with a surrogate model that takes as input magnetic diagnostic measurements and outputs the current profile on a basis comprising the top principal components of historical current profiles (from past equilibrium reconstructions). This method solves the non-uniqueness problem typically faced when reconstructing current profiles directly from diagnostics, while improving computational time and accuracy. On average, profiles produced by this model reach coefficients of determination of >0.99 with respect to those from equilibrium reconstructions. The avoidance actuators employed include poloidal field coils and an electron cyclotron current drive system. The multiactuator approach, as shown in this first demonstration, allows disruption avoidance while minimizing impact to operational performance. This ability, along with its flexibility and speed, makes this new approach an attractive option for avoiding these types of disruptions in reactors.

Tobin, Matthew [Columbia Univ., New York, NY (Unit↗
NASA NTRS2010

Use of LS-DYNA(Registered TradeMark) to Assess the Energy Absorption Performance of a Shell-Based Kevlar(TradeMark)/Epoxy Composite Honeycomb

The forward and vertical impact stability of a composite honeycomb Deployable Energy Absorber (DEA) was evaluated during a full-scale crash test of an MD-500 helicopter at NASA Langley?s Landing and Impact Research Facility. The lower skin of the helicopter was retrofitted with DEA components to protect the airframe subfloor upon impact and to mitigate loads transmitted to Anthropomorphic Test Device (ATD) occupants. To facilitate the design of the DEA for this test, an analytical study was conducted using LS-DYNA(Registered TradeMark) to evaluate the performance of a shell-based DEA incorporating different angular cell orientations as well as simultaneous vertical and forward impact conditions. By conducting this study, guidance was provided in obtaining an optimum design for the DEA that would dissipate the kinetic energy of the airframe while maintaining forward and vertical impact stability.

Polanco, Michael↗