Search NASA⌕ Search

SEARCH · Search NASA

Results for “viscous dissipation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Aerothermal Effects of Hypersonic Shock Impingement on a Highly Swept Leading Edge

A numerical study is conducted to investigate aerothermal implications of oblique shock impingement on a highly swept leading edge in hypersonic flow, with flow conditions and geometry relevant to non-propulsive leading edge heating on hypersonic cruise vehicles. In contrast to propulsive inlet leading edge shock impingement, which has been subject to extensive historical study, bow shock impingement on a highly swept wing leading edge has received comparatively little attention in the literature. Distinguishing characteristics of this type of flow include a potentially dominant surface heating contribution from crossflow-induced viscous dissipation, possible wall velocity slip and temperature jump effects, and various modes of shock layer thermal nonequilibrium that can interact with shock impingement flowfield structures. One overall goal of this work is to assess the impact of bow shock impingement and related nonequilibrium phenomena for wing leading edge design, materials selection and thermal management. Another goal is to improve understanding – and thereby reduce associated design margins – for the physical processes and mechanisms that may influence wing leading edge heating in the presence of an impinging shock. A combination of direct simulation Monte Carlo and Reynolds-averaged Navier-Stokes analysis is used to assess surface and flowfield characteristics for a series of hypersonic shock impingement problems, based on historical ground tests and related flight conditions. Favorable comparisons are performed with experimental data, and various thermal nonequilibrium effects are quantified.

direct simulation Monte Carlo↗
NASA NTRS1974

Linear viscous stability analysis of the stratified Bickley jet

The stability of the stably stratified Bickley jet to small disturbances in a viscous, heat conducting fluid is explored by numerical integration of the governing differential equation. Curves of neutral stability are presented in the alpha-R plane and the parametric dependence of these curves upon Richardson number and Prandtl number is examined. The results show a curious bimodal behavior of the curve of neutral stability for small Richardson numbers. In addition, closed neutral curves are found for Richardson numbers in excess of the critical value for the inviscid flow. The unstable regions in the interior of these curves increase with decreasing Prandtl number. Energy balances are computed which show the relative magnitude of the Reynolds stress production, buoyancy dissipation, and viscous dissipation terms across the flow. As the thermal diffusivity becomes large compared with the kinematic viscosity, the buoyancy term is suppressed and the thermal stratification becomes irrelevant.

Gage, K. S.↗
NASA NTRS1990

Resonant absorption of p-modes by sunspots

Explanations for the observed p-mode absorption in sunspots are examined. It is demonstrated that any dissipative process like radiative, viscous, or resistive dissipation leads to the resonant absorption of acoustic waves incident on the sunspot tube, and that the resultant heating rate can be shown to be consistent with the observed absorption of the p-mode power impinging on an isolated inhomogeneously structured sunspot.

Chitre, S. M.↗
NASA NTRS1990

Prospects for drag prediction using computational fluid dynamics

An account is given of CFD methods deemed likely to yield aerodynamic drag prediction improvements. Improvements in drag prediction are noted to largely proceed from improvements in viscous-layer resolution. Geometric modeling and grid generation are acknowledged to be major pacing items, and may be more important than turbulence modeling. The use of upwind differencing has led to improved solution accuracy due to the nature of the artificial viscosity in cases involving shocks and nonphysical dissipation across viscous layers. Multiblock algorithms will allow more complex geometries to be treated.

Roberts, Thomas W.↗
NASA NTRS1988

Thermal effects in two-phase flow through face seals

When liquid is sealed at high temperature, it flashes inside the seal due to pressure drop and/or viscous heat dissipation. Two-phase seals generally exhibit more erratic behavior than their single phase counterparts. Thermal effects, which are often neglected in single phase seal analyses, play an important role in determining seal behavior under two-phase operation. It is necessary to consider the heat generation due to viscous shear, conduction into the seal rings and convection with the leakage flow. Analytical models developed work reasonably well at the two extremes - for low leakage rates when convection is neglected and for higher leakage rates when conduction is neglected. A preliminary model, known as the Film Coefficient Model, is presented which considers conduction and convection both, and allows continuous boiling over an extended region unlike the previous low-leakage rate model which neglects convection and always forces a discrete boiling interface. Another simplified, semi-analytical model, based on the assumption of isothermal conditions along the seal interafce, has been developed for low leakage rates. The Film Coefficient Model may be used for more accurate and realistic description.

Basu, Prithwish↗
NASA NTRS1998

Liquid Motion in a Rotating Tank Experiment (LME)

The Liquid Motion Experiment (LME), which flew on STS 84 in May 1997, was an investigation of liquid motions in spinning, nutating tanks. LME was designed to quantify the effects of such liquid motions on the stability of spinning spacecraft, which are known to be adversely affected by the energy dissipated by the liquid motions. The LME hardware was essentially a spin table which could be forced to nutate at specified frequencies at a constant cone angle, independently of the spin rate. Cylindrical and spherical test tanks, partially filled with liquids of different viscosities, were located at the periphery of the spin table to simulate a spacecraft with off-axis propellant tanks; one set of tanks contained generic propellant management devices (PMDs). The primary quantitative data from the flight tests were the liquid-induced torques exerted on the tanks about radial and tangential axes through the center of the tank. Visual recordings of the liquid oscillations also provided qualitative information. The flight program incorporated two types of tests: sine sweep tests, in which the spin rate was held constant and the nutation frequency varied over a wide range; and sine dwell test, in which both the spin rate and the nutation frequency were held constant. The sine sweep tests were meant to investigate all the prominent liquid resonant oscillations and the damping of the resonances, and the sine dwell tests were meant to quantify the viscous energy dissipation rate of the liquid oscillations for steady state conditions. The LME flight data were compared to analytical results obtained from two companion IR&D programs at Southwest Research Institute. The comparisons indicated that the models predicted the observed liquid resonances, damping, and energy dissipation rates for many test conditions but not for all. It was concluded that improved models and CFD simulations are needed to resolve the differences. This work is ongoing under a current IR&D program.

Deffenbaugh, D. M.↗
NASA NTRS1977

Evaluation of subgrid-scale turbulence models using a fully simulated turbulent flow

An exact turbulent flow field was calculated on a three-dimensional grid with 64 points on a side. The flow simulates grid-generated turbulence from wind tunnel experiments. In this simulation, the grid spacing is small enough to include essentially all of the viscous energy dissipation, and the box is large enough to contain the largest eddy in the flow. The method is limited to low-turbulence Reynolds numbers, in our case R sub lambda = 36.6. To complete the calculation using a reasonable amount of computer time with reasonable accuracy, a third-order time-integration scheme was developed which runs at about the same speed as a simple first-order scheme. It obtains this accuracy by saving the velocity field and its first-time derivative at each time step. Fourth-order accurate space-differencing is used.

Clark, R. A.↗
NASA NTRS1985

Io: Generation of Silicate Magma by Shear Melting at the Base of a Basaltic Lithosphere

Tidal theory and observational evidence indicates that about 1 w/sq. m. of energy is released at the surface of Io. In order to place limits on how much tidal energy can be dissipated within a rigid lithosphere, depth-temperature profiles were calculated for different lithosphere thickness assuming that the tidal energy was dissipated uniformly throughout the lithosphere. Thus a thick lithosphere implies that a significant fraction of the tidal energy is dissipated below the depth where solidus temperatures are reached. One possibility is that Io has a crust consisting of a low melting temperature fraction such as basalt, overlying a mantle of a high melting temperature fraction such as peridotite. Thus, if the lithosphere of Io is thicker than 30 km, as appears probable, then high rates of silicate volcanism are implied and a significant fraction of the tidal energy must be dissipated by viscous deformation rather than rigid flexure.

Carr, M. H.↗
NASA NTRS1985

Research on the Early History of the Solar System

The evolution of a dissipating turbulently viscous disk of gas and dust formed during the collapse of an interstellar cloud fragment and how it relates to the early history of the solar system is discussed. Results from calculations on modelling the inner parts of the primitive solar nebula subject to the assumption of a steady inward flow are given. Other calculations are reviewed which simulate the accretion of a star from an accretion disk. Scenarios for the evolution of the primitive solar nebula and the formation of the Moon as a result of a major collision with the protoearth are described.

Cameron, A. G. W.↗
NASA NTRS1997

Self-Consistent Thermal Accretion Disk Corona Models for Compact Objects. I: Properties of the Corona and the Spectrum of Escaping Radiation

We present the properties of accretion disk corona (ADC) models in which the radiation field, the temperature, and the total opacity of the corona are determined self-consistently. We use a nonlinear Monte Carlo code to perform the calculations. As an example, we discuss models in which the corona is situated above and below a cold accretion disk with a plane-parallel (slab) geometry, similar to the model of Haardt & Maraschi. By Comptonizing the soft radiation emitted by the accretion disk, the corona is responsible for producing the high-energy component of the escaping radiation. Our models include the reprocessing of radiation in the accretion disk. Here the photons either are Compton-reflected or photoabsorbed, giving rise to fluorescent line emission and thermal emission. The self- consistent coronal temperature is determined by balancing heating (due to viscous energy dissipation) with Compton cooling, determined using the fully relativistic, angle-dependent cross sections. The total opacity is found by balancing pair productions with annihilations. We find that, for a disk temperature kT(sub BB) approx. less than 200 eV, these coronae are unable to have a self-consistent temperature higher than approx. 140 keV if the total optical depth is approx. less than 0.2, regardless of the compactness parameter of the corona and the seed opacity. This limitation corresponds to the angle-averaged spectrum of escaping radiation having a photon index approx. greater than 1.8 within the 5-30 keV band. Finally, all models that have reprocessing features also predict a large thermal excess at lower energies. These constraints make explaining the X-ray spectra of persistent black hole candidates with ADC models very problematic.

Dove, James B.↗
NASA NTRS1998

Liquid Motion Experiment Flight Test Results

The Liquid Motion Experiment (LME), designed to study the effects of liquid motion in rotating tanks, was flown on STS 84. LME was essentially a spin table that created a realistic nutation motion of scale-model tanks containing liquid. TWo spherical and two cylindrical transparent tanks were tested simultaneously, and three sets of such tanks were employed to vary liquid viscosity, fill level, and propellant management device (PMD) design. All the tanks were approximately 4.5 inches diameter. The primary test measurements were the radial and tangential torques exerted on the tanks by the liquid. Resonant frequencies and damping of the liquid oscillations were determined by sine sweep tests. For a given tank shape, the resonant frequency depended on fill level. For the cylindrical tanks, the resonances had somewhat different frequencies for the tangential axis (0.55 to 0.75 times spin rate) and the radial axis (0.73 to 0.78 times spin rate), and the tangential axis resonance agreed more closely with available analytical models. For the spherical tanks, the resonant frequencies were between 0.74 to 0.77 times the spin rate and were the same for the tangential and radial axes. The damping coefficients varied from about I% to 3% of critical, depending on tank shape, fill level, and liquid viscosity. 'Me viscous energy dissipation rates of the liquid oscillations were determined from sine dwell tests. The LME energy dissipation rates varied from 0.3 to 0.5 times the estimates obtained from scaling previous ground tests and spacecraft flight data. The PNDs sometimes enhanced the resonances and energy dissipation rates and sometimes decreased them, which points out the need to understand better the effects of PMD on liquid motion as a function of PMD and tank design.

Chato David J.↗
NASA NTRS1997

Aerodynamics of a Simple Three-Dimensional High-Lift System

Experimental results are presented for a three-element high-lift system with a half-span flap and both a full- and three-quarter span slat. The simplified wing spanned the wind-tunnel test section with no wing sweep or wing tip. Full- and part-span slat configurations were tested to investigate the three-dimensional effects of a finite-span slat in a landing configuration. With a part-span slat, flow visualization and surface pressures revealed two vortices at the flap tip and one at the slat tip. Compared to the full-span slat case, the part-span slat configuration stalled at a lower angle of attack and yielded reduced lift at all angles of attack. At a representative approach attitude (10 deg), wake surveys indicated comparable induced drag for the full- and part-span slat configurations while the profile drag was more than doubled with a part-span slat. The vorticity contribution of the slat-tip vortex was minimal, suggesting that the vortex dissipates through viscous interaction with the main-element boundary layer. The addition of a lower-surface fence at the slat tip yielded two co-rotating vortices and partially alleviated the profile drag increase of the part-span slat.

Storms, Bruce↗
NASA NTRSDate not supplied

Budgets of Reynolds Stresses and Turbulent Heat Flux for Hypersonic Turbulent Boundary Layers Subject to Pressure Gradients

In this paper, the budget terms in the transport equations of the Reynolds stresses, the turbulent kinetic energy (TKE), the internal energy, and the turbulent heat flux are computed using a direct numerical simulation (DNS) database of hypersonic turbulent boundary layers (TBLs) subject to favorable pressure gradients (FPG). Study of the Reynolds stress and TKE budgets shows that FPG has a damping effect on turbulence production, transport, and destruction. The semilocal scaling fails to collapse the Reynolds stress and TKE budget terms between the zero pressure gradient (ZPG) and the strong FPG cases, suggesting that the mechanical nonequilibrium due to FPG leads to changes in Reynolds-stress and TKE transport that cannot be captured by Morkovin’s hypothesis. Minimal change is seen in the internal energy budget in the presence of FPG, indicating a minimal impact due to FPG on the mean thermal field. While the near-wall transport of wall-normal turbulent heat flux is largely governed by the balance between the turbulent viscous-thermal transport term and the turbulent viscous-thermal dissipation term, the transport of the streamwise turbulent heat flux is influenced by contributions from almost all of the budget terms. For the strong FPG case in particular, production due to both the mean and the fluctuating strain rates begins to play a significant role in the near-wall transport of the streamwise turbulent heat flux, and their inclusion or modeling may be required to accurately predict turbulent heat fluxes for a strong FPG.

Reynolds stress↗
NASA NTRSDate not supplied

Extending Acoustic Liner Bandwidth with Simple Embedded Septa

An acoustic liner design incorporating single-hole perforate septa was evaluated by the NASA Langley Liner Physics Team. The design, termed the ‘Simplified Septa’ concept, incorporates embedded septa as found in traditional, multidegree-of-freedom liners. Generally, such septa are composed of multihole perforates or porous mesh, whereas this concept uses septa with one hole per cell. An optimization scheme was employed to determine septa placement and hole diameters based on a target impedance cost function. Versions of the concept are tested in the NASA Langley Normal Incidence Tube (NIT) to determine impedance and absorption spectra for swept tonal excitation at 120 and 140 dB. Experimental results are compared to predictions from a liner model based on the Zwikker-Kosten Transmission Line (ZKTL) code and show good agreement for no-flow conditions.

acoustics↗
NASA NTRSDate not supplied

Extending Acoustic Liner Bandwidth with Simple Embedded Septa

An acoustic liner design incorporating single-hole perforate septa was evaluated by the NASA Langley Liner Physics Team. The design, termed the ‘Simplified Septa’ concept, incorporates embedded septa as found in traditional, multidegree-of-freedom liners. Generally, such septa are composed of multihole perforates or porous mesh, whereas this concept uses septa with one hole per cell. An optimization scheme was employed to determine septa placement and hole diameters based on a target impedance cost function. Versions of the concept are tested in the NASA Langley Normal Incidence Tube (NIT) to determine impedance and absorption spectra for swept tonal excitation at 120 and 140 dB. Experimental results are compared to predictions from a liner model based on the Zwikker-Kosten Transmission Line (ZKTL) code and show good agreement for no-flow conditions.

acoustics↗
NASA NTRS1974

Dissipative heating effects and end corrections for viscous Newtonian flow in high shear capillary tube viscometry

The effect of dissipation heating on the apparent viscosity measured in capillary tube viscometry is described in this paper. Conditions of low Reynolds number and high shear are assumed. End corrections to the tube flow are incorporated. The flow curves show decreasing apparent viscosity when the shear stress increases. The configuration of the flow curves plotted in logarithmic presentation are found to be identical for fluids with Newtonian behavior. Convection is the predominant mechanism in removal of the heat in short capillary tube. The estimated upper bound for the shear stress obtainable in short length capillary tubes appears to be of the order of magnitude of 10 MPa limited primarily by the pressure drop associated with the constant end correction from the flat ended inlet and exit of the tube.

Jakobsen, J.↗
DOE OSTI2021

Dissipation in the magnetic turbulence of reversed field pinch plasmas

Reversed field pinch plasmas are subject to tearing instability that creates a broad spectrum of magnetic fluctuations. The dominant fluctuations have poloidal and toroidal mode numbers (m,n) = (1,6 - 10) and can grow to 2 - 3% of the mean magnetic field. Through non-linear coupling this growth culminates in a strong reconnection event and broadening of the magnetic spectrum extending to the ion gyroradius scale. Multiple developments occur during the reconnection stage: ions and electrons are energized, magnetic fluctuation amplitudes increase, plasma flow is halted, and the toroidal magnetic flux increases in a sawtooth-like fashion as the RFP dynamo becomes stronger. Magnetic fluctuations are measured in the plasma edge at multiple radial locations from r/a = 0.75 to 0.96 to assess and characterize the magnetic turbulence. The measured spectrum perpendicular to the mean field, S(k ⊥ ), can be fit to a model spectrum consisting of power law and exponential component with one free parameter that characterizes dissipation. The measured dissipation is much larger than estimated from classical viscous or resistive dissipation, but it is consistent with a flow damping measurement of anomalous viscosity. The measurements show an evolution of the spectrum during which fluctuation power builds up in the smallest wavenumbers and cascades to the larger wavenumber due to the non-linear coupling between the linear (m,n) = (1, > 6) and the non-linear (m,n) = (0, 1) tearing mo

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗