Search NASA⌕ Search

SEARCH · Search NASA

Results for “wall features”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Tool removes brazed fittings

Device, which removes fittings from thin-walled tubing, will not accidentally bond to fitting, nor will it cause tube wall to melt. Key feature is the use of expendable split-ring heat sink insert. Technique is applicable to fitting stubs of all sizes and wall thicknesses.

Hurley, W. J.↗

Demonstration of particle exhaust control during ELM suppression by resonant magnetic perturbations in DIII-D

A reduction in plasma electron density ('pump-out') during the application of resonant magnetic perturbations (RMPs) on DIII-D precedes the suppression of edge localized modes (ELMs) in discharges with low (<= 0.2) electron pedestal collisionalities. The magnitude of the density drop near the plasma pedestal can be up to 30% and as low as similar to 2% for discharges with similar applied RMP, and thus motivates further study to determine the cause of the variation. Based on an analysis of the global particle balance and measurements of the D-alpha poloidal distribution, it is shown that the wall inventory can be strongly affected by changing the average triangularity ( ) of the discharge. Specifically, particle balance in = 0.3 discharges shows that the density pump-out was substantially higher than the increase in particle exhaust to the cryo-pumps, i.e. wall pumping was apparently required. On the other hand, particle balance in = 0.5 discharges shows that the density pump-out was offset by an increase in exhaust to the cryo-pumps, i.e. wall pumping was not required. Correspondingly, the D-alpha intensity increased by similar to 50%-100% at = 0.5 during the RMP phase of the discharge when compared with theRMPphase of a = 0.3 discharge. Both of these observations imply a possible increase in the neutral particles in the scrape-off-layer. More significantly, this new result demonstrates density pump-out and ELM suppression without significant wall pumping, which is a desirable feature for long-pulse reactors with saturated walls.

Unterberg, E. A.↗

Thermal Impact of Fasteners in High-Performance Wood-Framed Walls: Preprint

Buildings are heavy consumers of energy, and residential building design is rapidly addressing topics to maximize energy conservation en route to net-zero energy consumption. Annual energy analysis of a building informs the choice among disparate energy measures, for cost, durability, occupant comfort, and whole-house energy use. Physics-based and empirical models of elements of a building are used in such analyses. High-performance wood-framed walls enable builders to construct homes that use much less than 40% of the energy consumed by similar homes built to minimum code. Modeling for these walls has considered physical features such as framing factor, insulation and framing properties, roughness and convective effects, and air leakage. The thermal effects of fasteners used to construct these walls have not been fully evaluated, even though their thermal conductivity is orders of magnitudes higher than that of other building materials. Drywall screws and siding nails are considered in this finite element thermal conductivity analysis of wall sections that represent wood-framed walls that are often used in high-performance homes. Nails and screws reduce even the best walls' insulating performance by approximately 3% and become increasingly significant as the framing factor increases.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Fabrication of one-dimensional photonic crystals by photoelectrochemical etching of silicon

The conditions of formation of deep periodic trenches by photoelectrochemical etching of n-Si (100) with linear seeds on the surface are analyzed. Criteria for the proper choice of the period of seed grooves and the etching current density in relation to the doping level of the substrate are formulated. Corrugation of walls is a characteristic feature of the obtained structures; this corrugation is caused by traces of merged macropores. Atomic-force microscopy is used to study roughness of the side-walls in relation to the etching conditions; the current density at which one can obtain the smoothest side-walls is determined. The roughness of the side walls in structures with periods of 7 and 9 {mu}m on Si with the resistivity of 15 {Omega} cm amounts to {approx}40 nm. It is shown that additional treatment of the structures in alkaline solutions can decrease the side-wall roughness by approximately a factor of 2.

36 MATERIALS SCIENCE↗

In situ scanning probe microscopy studies of cross-coupled domains and domain walls. Final technical report

The objective of this project is to explore the nanoscale emergent phenomena and to understand the unconventional properties of cross-coupled domains and domain walls in multiferroics, where both ferroelectricity and magnetism coexist. The giant magnetoelectric effect due to coupled ferroic orders in multiferroics is of both fundamental and technological interest and is promising for energy-efficient multifunctional applications. The presence of domains and domain walls is a distinguishing feature of any ferroic order; their responses to external stimuli determine the macroscopic properties and the functionalities of ferroic materials. To address the challenges and to directly visualize the cross-coupled domains and domain walls and their responses to the applied electric and magnetic fields, this project will develop a unique, high-resolution and high-sensitivity in situ scanning force microscopy (SFM). The real space imaging of domains and domain walls by SFM aims to fundamentally understand the nature of magnetoelectric cross-coupling in representative multiferroic and magnetoelectric materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Overcoming the Power Wall by Exploiting Application Inexactness and Emerging COTS Architectural Features

Abstract—Energy and power consumption are major limitations to continued scaling of computing systems. Inexactness where the quality of the solution can be traded for energy savings has been proposed as a counterintuitive approach to overcoming those limitation. However, in the past, inexactness has been necessitated the need for highly customized or specialized hardware. In order to move away from customization, in earlier work [4], it was shown that by interpreting precision in the computation to be the parameter to trade to achieve inexactness, weather prediction and page rank could both benefit in terms of yielding energy savings through reduced precision, while preserving the quality of the application. However, this required representations of numbers that were not readily available on commercial off-the-shelf (COTS) processors. In this paper, we provide opportunities for extending the the notion of trading precision for energy savings into the world COTS. We provide a model and analyze the opportunities and behavior of all three IEEE compliant precision values available on COTS processors: (i) double (ii) single, and (iii) half. Through measurements, we show through a limit study energy savings in going from double to half precision can potentially exceed a factor of four, largely due to memory and cache effects.

Fagan, Mike↗

Mean-velocity profile of smooth channel flow explained by a cospectral budget model with wall-blockage

A series of recent studies has shown that a model of the turbulent vertical velocity variance spectrum (Fvv) combined with a simplified cospectral budget can reproduce many macroscopic flow properties of turbulent wall-bounded flows, including various features of the mean-velocity profile (MVP), i.e., the “law of the wall”. While the approach reasonably models the MVP’s logarithmic layer, the buffer layer displays insufficient curvature compared to measurements. The assumptions are re-examined here using a direct numerical simulation (DNS) dataset at moderate Reynolds number that includes all the requisite spectral and co-spectral information. Starting with several hypotheses for the cause of the “missing” curvature in the buffer layer, it is shown that the curvature deficit is mainly due to mismatches between (i) the modelled and DNS-observed pressure-strain terms in the cospectral budget and (ii) the DNS-observed Fvv and the idealized form used in previous models. By replacing the current parameterization for the pressure-strain term with an expansive version that directly accounts for wall-blocking effects, the modelled and DNS reported pressure-strain profiles match each other in the buffer and logarithmic layers. Forcing the new model with DNS-reported Fvv rather than the idealized form previously used reproduces the missing buffer layer curvature to high fidelity thereby confirming the “spectral link” between Fvv and the MVP across the full profile. A broad implication of this work is that much of the macroscopic properties of the flow (such as the MVP) may be derived from the energy distribution in turbulent eddies (i.e., Fvv) representing the microstate of the flow, provided the link between them accounts for wall-blocking.

54 ENVIRONMENTAL SCIENCES↗

Developing a Composite Vacuum Insulated Panel (VIP) Insulation/Vinyl Siding Composite Technology for Retrofitting Residential Walls

This paper reports on a project that has attempted to seize on an opportunity to take a giant leap forward in commercializing a technology that would address a key opportunity to achieve energy savings in the existing residential housing stock. It is typically very difficult to increase the R-value of the walls in existing residential housing as doing so from the inside is disruptive and there have not been good solutions to increase thermal envelope performance from the exterior through adding continuous insulation due to the additional work required to fit existing architectural features to the new wall thickness and to reclad the façade. A high thermal resistivity or R-value per inch product that can be used in these applications offers an excellent solution.This paper summarizes a three-year research project to a produce vacuum insulated panel (VIP)/vinyl siding that would have sufficient R-value to meet the continuous insulation requirements of the 2018 International Energy Conservation Code (IECC, 2018) in all climate zones and has a much thinner profile that will facilitate its application to existing residential homes without the need for expensive retrimming of the architectural details. The paper will supply information on the development of the technology, its thermal modelling, testing, voice of user sessions to solicit input from architects, designers, manufacturers, contractors, and installers, and a techno-economic analysis to gauge its competitiveness with existing product options.

Desjarlais, Andre Omer↗

Developing a Composite Vacuum Insulated Panel (VIP) Insulation/Vinyl Siding Composite Technology for Retrofitting Residential Walls

This paper reports on a project that has attempted to seize on an opportunity to take a giant leap forward in commercializing a technology that would address a key opportunity to achieve energy savings in the existing residential housing stock. It is typically very difficult to increase the R-value of the walls in existing residential housing as doing so from the inside is disruptive and there have not been good solutions to increase thermal envelope performance from the exterior through adding continuous insulation due to the additional work required to fit existing architectural features to the new wall thickness and to reclad the facade. A high thermal resistivity or R-value per inch product that can be used in these applications offers an excellent solution. This paper summarizes a three-year research project to a produce vacuum insulated panel (VIP)/vinyl siding that would have sufficient R-value to meet the continuous insulation requirements of the 2018 International Energy Conservation Code (IECC, 2018) in all climate zones and has a much thinner profile that will facilitate its application to existing residential homes without the need for expensive retrimming of the architectural details. The paper will supply information on the development of the technology, its thermal modelling, testing, voice of user sessions to solicit input from architects, designers, manufacturers, contractors, and installers, and a techno-economic analysis to gauge its competitiveness with existing product options.

Desjarlais, Andre↗

2009 Cellulosomes, Cellulases & Other Carbohydrate Modifying Enzymes GRC

The 2009 Gordon Conference on Cellulosomes, Cellulases & Other Carbohydrate Modifying Enzymes will present cutting-edge research on the enzymatic degradation of cellulose and other plant cell wall polysaccharides. The Conference will feature a wide range of topics that includes the enzymology of plant structural degradation, regulation of the degradative apparatus, the mechanism of protein complex assembly, the genomics of cell wall degrading organisms, the structure of the substrate and the industrial application of the process particularly within the biofuel arena. Indeed the deployment of plant cell wall degrading enzymes in biofuel processes will be an important feature of the meeting. It should be emphasized that the 2009 Conference will be expanded to include, in addition to cellulase research, recent advances in other plant cell wall degrading enzymes, and contributions from people working on hemicellulases and pectinases will be particularly welcome. Invited speakers represent a variety of scientific disciplines, including biochemistry, structural biology, genetics and cell biology. The interplay between fundamental research and its industrial exploitation is a particularly important aspect of the meeting, reflecting the appointment of the chair and vice-chair from academia and industry, respectively. The meeting will provide opportunities for junior scientists and graduate students to present their work in poster format and exchange ideas with more established figures in the field. Indeed, some poster presenters will be selected for short talks. The collegial atmosphere of this Conference, with programmed discussion sessions as well as opportunities for informal gatherings in the afternoons and evenings, provides an avenue for scientists from different disciplines to brainstorm and promotes cross-disciplinary collaborations in the various research areas represented. The Conference is likely to be heavily subscribed so we would recommend that you submit your application/abstract to the GRC web site as soon as possible.

59 BASIC BIOLOGICAL SCIENCES↗

Concentric Nested Toroidal Inflatable Structures

Assemblies comprising multiple limited- height toroidal inflatable structures nested in a concentric arrangement have been invented to obtain more design flexibility than can be obtained in single taller, wider toroidal inflatable structures (see figure). Originally intended for use as containers for habitats for humans in outer space or on remote planets, these and related prior inflatable structures could also be useful on Earth as lightweight, compactly stowable, portable special-purpose buildings that could be transported to remote locations and there inflated to full size and shape. In the case of a single inflatable toroidal structure, one important source of lack of design flexibility is the fact that an increase in outer diameter (which is sometimes desired) is necessarily accompanied by an increase in height (which is sometimes undesired). Increases in diameter and height can also cause difficulty in utilization of the resulting larger volume, in that it can become necessary to partition the volume by means of walls and floors, and features (e.g., stairs or ladders) must be added to enable vertical movement between floors. Moreover, ascending and descending between floors in a gravitational environment could pose unacceptable difficulty for the inhabitants under some circumstances. Another source of lack of design flexibility in a single toroidal inflatable structure is that for a given inflation pressure, an increase in the outer diameter of the structure necessarily entails an increase in the maximum stress in the structure. Because it is necessary to keep the maximum stress within the load-bearing capability of the structural materials, consistent with other aspects of the design, this may translate to a limit on the outer diameter. In an assembly comprising concentric nested toroidal structures, an increase in outer diameter does not necessarily entail an increase in height or a maximum stress in excess of the load-bearing capability of the structural materials. The minor diameters of the nested toroid can be chosen to partition interior spaces optimally, without necessitating the addition of walls or floors. Inasmuch as the maximum stress in a nested inflatable toroidal structure is a function of its minor diameter and the minor diameter is typically small enough that the load-bearing capability of the structural materials is not exceeded, there is no longer a limit on the outer diameter of the assembly: instead, the assembly can be expanded, without limit, by simply adding concentric inflatable toroidal structures having suitable minor diameters and successively larger major diameters. The minor diameters need not be equal:

Johnson, Christopher J.↗

Switching of Coercivity Process in MnBi Alloys

MnBi-based alloys represent an interesting choice for developing rare earth-free permanent magnets due to the high magnetocrystalline anisotropy of their characteristic low-temperature intermetallic phase (LTIP) with hexagonal structure. In this work, we discuss the switching of coercivity mechanism in MnBi alloys by modulation of their phase distribution and microstructure. As-cast MnBi alloys obtained by suction-casting technique exhibited LTIP interspersed within Bi- and Mn-rich areas. A noticeable coercivity field of 282 kA/m was observed. The coercivity mechanism for this alloy was explained in terms of the nucleation of reverse domains after saturation, by means of the Kronmüller equation, which incorporates the detrimental effect of microstructure defects through fitting parameters associated to reduced intrinsic magnetic properties at grain size boundaries, interfaces, and local demagnetizing fields. Subsequent annealing at 583 K for 24 h produced a marked reduction of coercivity (down to 16 kA/m), reflecting a switching of coercivity process from nucleation to pinning of domain walls. The key microstructural feature determining this variation is the formation/suppression of Bi-rich areas, which promotes the nucleation and growth of the initial MnBi intermetallic phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure, Morphology, and Nanomechanical Properties Near Fine Holes Produced by Electro-Discharge Machining

Fine holes in metal alloys are employed for many important technological purposes, including cooling and the precise atomization of liquids. For example, they play an important role in the metering and delivery of fuel to the combustion chambers in energy-efficient, low-emissions diesel engines. Electro-discharge machining (EDM) is one process employed to produce such holes. Since the hole shape and bore morphology can affect fluid flow, and holes also represent structural discontinuities in the tips of the spray nozzles, it is important to understand the microstructures adjacent to these holes, the features of the hole walls, and the nanomechanical properties of the material that was in some manner altered by the EDM hole-making process. Several techniques were used to characterize the structure and properties of spray-holes in a commercial injector nozzle. These include scanning electron microscopy, cross-sectioning and metallographic etching, bore surface roughness measurements by optical interferometry, scanning electron microscopy, and transmission electron microscopy of recast EDM layers extracted with the help of a focused ion beam.

electro-discharge machining↗

25-Hydroxycholesterol promotes fibroblast-mediated tissue remodeling through NF-κB dependent pathway

Abnormal structural alterations termed remodeling, including fibrosis and alveolar wall destruction, are important features of the pathophysiology of chronic airway diseases such as chronic obstructive pulmonary disease (COPD) and asthma. 25-hydroxycholesterol (25-HC) is enzymatically produced by cholesterol 25-hydorxylase (CH25H) in macrophages and is reported to be involved in the formation of arteriosclerosis. We previously demonstrated that the expression of CH25H and production of 25HC were increased in the lungs of COPD. However, the role of 25-HC in lung tissue remodeling is unknown. In this study, we investigated the effect of 25-HC on fibroblast-mediated tissue remodeling using human fetal lung fibroblasts (HFL-1) in vitro. 25-HC significantly augmented α-smooth muscle actin (SMA) (P<0.001) and collagen I (P<0.001) expression in HFL-1. 25-HC also significantly enhanced the release and activation of matrix metallaoproteinase (MMP)-2 (P<0.001) and MMP-9 (P<0.001) without any significant effect on the production of tissue inhibitor of metalloproteinase (TIMP)-1 and TIMP-2. 25-HC stimulated transforming growth factor (TGF)-β{sub 1} production (P<0.01) and a neutralizing anti-TGF-β antibody restored these 25-HC-augmented pro-fibrotic responses. 25-HC significantly promoted the translocation of nuclear factor (NF)-κB p65 into the nuclei (P<0.01), but not phospholylated-c-jun, a complex of activator protein-1. Pharmacological inhibition of NF-κB restored the 25-HC-augmented pro-fibrotic responses and TGF-β{sub 1} release. These results suggest that 25-HC could contribute to fibroblast-mediated lung tissue remodeling by promoting myofibroblast differentiation and the excessive release of extracellular matrix protein and MMPs via an NF-κB-TGF-β dependent pathway.

60 APPLIED LIFE SCIENCES↗

Coalescence-Induced Spontaneous Shedding of Microdroplets on Superhydrophobic Surfaces Featuring Enclosed Micropillars with Hierarchical Roughness

This study investigated water vapor condensation on superhydrophobic surfaces (SHSs) featuring micropillars enclosed by wall lattices and having three-tier hierarchical roughness. A total of five samples were created with three (NW-J, W200-J and W400-J samples) having large micropillar depth (~6 μm) and two (NW-S and W200-S samples) having small micropillar depth (~1 μm). Two distinct condensate removal modes were observed during condensation: coalescence-induced jumping on samples with large micropillar depth and coalescence-induced shedding on samples with small micropillar depth. The results showed that the diameter of the shedding droplet on the W200-S sample having small micropillar depth could be as small as 107 μm, as compared to the theoretical critical diameter of 267 μm for gravitational shedding on the same sample. The enhanced functionality of the three-tier nanotextures on the W200-S sample could effectively suppress localized pinning of the three-phase contact line and Wenzel neck formation during the growth of condensate droplets. Consequently, during multidroplet coalescence, the released surface energy easily overcomes the solid–liquid adhesion, leading to spontaneous shedding of merged droplets. The inclusion of the wall lattice aids condensate growth by the droplet self-alignment along the walls and promoting coalescence. As a result, the W200-S sample exhibited the highest condensate collection as well. In conclusion, the proposed surface design has great potential for scaling up and implementation in heating, ventilation, and air-conditioning equipment due to the simplicity of the surface morphology and the facile spray-coating method used to achieve hierarchical roughness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalysts in Coronas: A Surface Spatial Confinement Strategy for High-Performance Catalysts in Methane Dry Reforming

One of the grand challenges in industrial catalytic processes is the inevitable sintering and aggregation of conventional supported catalysts to large particles, leading to the decrease of activity and even deactivation with time. Herein, a surface spatial confinement strategy was employed to design high-performing catalysts for the dry reforming of methane (DRM). Specifically, active nickel (Ni) nanoparticles (NPs) were confined on the surface of a dendritic mesoporous silica (DMS) in the form of the “catalysts in coronas”. The Ni/DMS catalyst exhibited a high catalytic performance close to its equilibrium conversion (76% conversion for CH4 at 700 °C). More importantly, the prepared catalyst remained stable after 145 h time-on-stream at 700 °C without noticeable carbon deposition. This sintering and coking resistance was found to arise from the surface spatial confinement effect in which the three-dimensional dendritic layers in the corona posted a steric barrier against migration and aggregation of Ni NPs and size of Ni NPs was controlled below 5 nm, hence against sintering and coking. Meanwhile, the mesoporous feature of the layered wall facilitated mass transport of reactants to Ni species and further boosted catalysis. This strategy should be broadly applicable to a range of metal- and metal oxide-supported catalysts in high-temperature heterogeneous reactions, such as DRM, water gas shift reaction, and vehicle emission control related reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlating spin transport and electrode magnetization in a graphene spin valve: Simultaneous magnetic microscopy and non-local measurements

Using simultaneous magnetic force microscopy and transport measurements of a graphene spin valve, we correlate the non-local spin signal with the magnetization of the device electrodes. The imaged magnetization states corroborate the influence of each electrode within a one-dimensional spin transport model and provide evidence linking domain wall pinning to additional features in the transport signal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mapping causal patterns in crystalline solids

The evolution of the atomic structures of the combinatorial library of Sm-substituted thin film BiFeO 3 along the phase transition boundary from the ferroelectric rhombohedral phase to the non-ferroelectric orthorhombic phase is explored using scanning transmission electron microscopy. Localized properties, including polarization, lattice parameter, and chemical composition, are parameterized from atomic-scale imaging, and their causal relationships are reconstructed using a linear non-Gaussian acyclic model. This approach is further extended to explore the spatial variability of the causal coupling using the sliding window transform method, which revealed that new causal relationships emerged at both the expected locations, such as domain walls and interfaces, and at additional regions forming clusters in the vicinity of the walls or spatially distributed features. While the exact physical origins of these relationships are unclear, they likely represent nanophase-separated regions in the morphotropic phase boundaries. Overall, we posit that an in-depth understanding of complex disordered materials away from thermodynamic equilibrium necessitates understanding not only the generative processes that can lead to observed microscopic states but also the causal links between multiple interacting subsystems.

Causal inference↗