Hand-held electron beam gun and external power supply Final report, Jun. 1965 - Oct. 1966
Design, fabrication, and evaluation of hand held electron beam gun and external power supply for electron beam welding in space
Lawrence, G. S.↗
SEARCH · Search NASA
Results for “welding in space”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Pressurized panel
Large area pressurized meteoroid penetration detector panels with maximum inherent structural rigidity are provided. The panels measure directly the penetration rate in materials to be used in spacecraft. Panel structure include an interconnected cellular configuration in which the cells have spaced periphery welds and tufts in their centers. A spot weld is made at the center point joining the panels.
White, E. C.↗
Low Gravity Improves Welds
Hardnesses and tensile strengths greater. Welds made under right conditions in low gravity appear superior to those made under high gravity. Conclusion drawn from results of welding experiments conducted during low- and high-gravity-simulating maneuvers of KC-135 airplane. Results have implications not only for welding in outer space but also for repeated rapid welding on Earth or in airplanes under simulated low gravity to obtain unusually strong joints.
Workman, Gary L.↗
Welded Titanium Case for Space-Probe Rocket Motor
The high strength-to-weight ratio of titanium alloys suggests their use for solid-propellant rocket-motor cases for high-performance orbiting or space-probe vehicles. The paper describes the fabrication of a 6-in.-diam., 0.025-in.-wall rocket-motor from the 6A1-4V titanium alloy. The rocket-motor case, used in the fourth stage of a successful JPL-NASA lunar-probe flight, was constructed using a design previously proven satisfactory for Type 410 stainless steel. The nature and scope of the problems peculiar to the use of the titanium alloy, which effected an average weight saving of 34%, are described.
Brothers, A. J.↗
Welded Titanium Case for Space-Probe Rocket Motor
Early in 1958, the Jet Propulsion Laboratory of the California Institute of Technology was requested to participate in a lunar-probe mission code-named Juno II which would place a 15-lb Instrumented payload (Pioneer IV) in the vicinity of the moon. The vehicle was to use the same high-speed upper-stage assembly as flown on the successful Jupiter-C configuration; however, the first-stage booster was to be a Jupiter rather than a Redstone. An analysis of the intended flight and payload configuration Indicated that the feasibility of accomplishing the mission was questionable and that additional performance would have to be obtained if the mission was to be feasible. Since the most efficient way of Increasing the performance of a staged vehicle is to increase the performance of the last stage, a study of possible ways of doing this was made.. Because of the time schedule placed on this effort It was decided to reduce the weight of the fourth-stage rocket-motor case by substituting the annealed 6Al--4V titanium alloy for the Type 410 stainless steel. Although this introduced an unfamiliar material, It reduced the changes in design and fabrication techniques. This particular titanium alloy was chosen on the basis of previous tests which proved the suitability of the alloy as a pressure-vessel material when used at an annealed yield strength of about 120, 000 psi. The titanium-case fourth stage of Juno U is shown with the payload and on the missile in Fig. 1; the stainless-steel motor cases used in the Jupiter-C vehicle are shown in Fig. 2. The fourth-stage motor case has a diameter of 6 in., a length of approximately 38 in. center dot and a nominal cylindrical wall thickness of 0.025 in. As shown in Fig. 1, the case serves as the structural support of the payload and is aligned to the upper stage assembly through an alignment ring. The nozzle is threaded into the end of the motor case, and is of the ceramic-coated steel design. Figure 3 shows a comparison of the components used to make the stainless steel and the 6A1--4V titanium alloy cases. The forward dome and aft fitting for the stainless steel assembly were fabricated from a combination of forged, spun and machined parts.. In order to facilitate the fabrication of the titanium alloy motor ) these components were machined from a large-diameter billet.
Brothers, A. J.↗
Manufacture, Characterization, and Fusion Welding of Thermoplastic Composites for Space Applications
The goals of NASA’s Thermoplastic Development for Exploration Applications (TDEA) Project include an assessment of thermoplastic composite joints for space structures by developing and maturing design capabilities, analysis tools and techniques, and manufacturing processes for thermoplastic composites. Through this effort the TDEA project will expand NASA’s in-house thermoplastic composite manufacturing capabilities, develop an understanding of advanced thermoplastic joining techniques relevant to space environments, evaluate the feasibility of reconfigurable composite structures, and advance structural analysis capabilities. This presentation will provide an overview of the materials and manufacturing effort within the TDEA project. Three semi-crystalline and one amorphous thermoplastic composite materials were selected for initial screening and provided an opportunity to gain manufacturing experience across a range of processing temperatures, rheological behavior, and composite properties. Equivalency to the National Center for Advanced Materials Performance (NCAMP) test report for Toray’s TC1225 material was established to provide confidence in in-house manufacturing and material properties were generated through baseline mechanical tests for each material. Material characterization data was generated for a subset of materials to (1) provide data for analysis and model development and (2) generate thermal, rheological and conductivity data across relevant temperatures. A key objective of the TDEA project is evaluation of thermoplastic composite joining processes suitable for in-space operations. This presentation will outline the project’s progress in fusion bonding of candidate materials to assess the quality, reproducibility and strength of the bond, as well as identify limitations to in-space manufacturing. The feasibility of joint disassembly and reassembly will be discussed.
thermoplastic composite↗
Manufacture, Characterization, and Fusion Welding of Thermoplastic Composites for Space Applications
The goals of NASA’s Thermoplastic Development for Exploration Applications (TDEA) Project include an assessment of thermoplastic composite joints for space structures by developing and maturing design capabilities, analysis tools and techniques, and manufacturing processes for thermoplastic composites. Through this effort the TDEA project will expand NASA’s in-house thermoplastic composite manufacturing capabilities, develop an understanding of advanced thermoplastic joining techniques relevant to space environments, evaluate the feasibility of reconfigurable composite structures, and advance structural analysis capabilities.1
thermoplastic composite↗
Structural, Criticality, and Radiation Dose Calculations to Support SNF Loading into a DOE Standard Canister
The DOE Standard Canister Demonstration Project includes the development of an internal support structure (ISS) for the 4.6-m-long and 45.7-cm-diameter canister. This study presents structural evaluations, criticality safety assessments, and dose rate calculations conducted within the scope of the ISS design process to support smooth canister loading operations and to ensure safe storage, transportation, and disposal of Peach Bottom 1 Core II (PB2) and Fort St. Vrain (FSV) SNF, currently stored at INL’s CPP-603 facility. The ISS includes a 316L stainless-steel basket that holds 12 PB2 SNF rods. The PB2 basket rests on top of six individual, 78.7-cm-long, 316L stainless-steel columns that are equally spaced and welded to the inner canister wall at the lower end of the shell. These columns represent the FSV basket and can hold one FSV SNF element. An A92014 T6 aluminum spacer disc is bolted to the bottom plate of the PB2 basket to vertically restrain the FSV SNF element after the PB2 basket is placed inside the canister above the FSV basket. The structural evaluations of the ISS followed applicable ASME BPVC.III.3 guidelines and included finite element (FE) analyses of the PB2 basket structure; analyses of welds and bolds; buckling analyses of selected components, and acceptability assessments of the expected basket deformations under loading operations. The criticality safety assessments used the Monte Carlo N-Particle (MCNP) software architecture Version 6.2, including ENDF/B-V continuous-energy cross-section libraries, considering intact SNF in a single storage overpack or two multistorage overpack configurations and intact or failed SNF configured for disposal. The dose rate computations are based on source terms taken from the DOE Spent Fuel Database. The isotopic composition was decay corrected for the year 2022 using the ORIGEN module in the SCALE suite. A 19-group photon spectrum and a 27-group neutron-source spectrum were generated and used in MCNP to calculate estimated dose-equivalent rates, both on DOE Standard Canister contact and at a radial distance of 1 m from the canister surface. The results of this study indicate a structurally sound system that can uphold its criticality safety functions throughout its intended operational phases. Furthermore, this study provides confidence that sufficient radiological protection is technically achievable.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Structural, Criticality, and Radiation Dose Calculations to support SNF Loading into a DOE Standard Canister
The DOE Standard Canister Demonstration Project includes the development of an internal support structure (ISS) for the 4.6-m long and 45.7-cm diameter canister. This study presents structural evaluations, criticality safety assessments, and dose rate calculations conducted within the scope of the ISS design process to support smooth canister loading operations and to ensure safe storage, transportation, and disposal of Peach Bottom 1 Core II (PB2) and Fort St. Vrain (FSV) SNF, currently stored at the CPP-603 facility of the INL. The ISS includes a 316L stainless steel basket that holds twelve PB2 SNF rods. Further, six individual, 78.7-cm long, 316L stainless steel columns are equally spaced and welded to the inner canister wall at the lower end of the shell. These columns represent the FSV basket and can hold one FSV SNF element. An A92014 T6 aluminum spacer disc is bolted to the bottom plate of the PB2 basket to vertically restrain the FSV SNF element after the PB2 basket is placed inside the canister on top of the FSV basket. The structural evaluations of the ISS followed applicable ASME BPVC.III.3 guidelines and included finite element (FE) analyses of the PB2 basket structure; analyses of welds and bolds; buckling analyses of selected components, and acceptability assessments of the expected basket deformations under loading operations. The criticality safety assessments used the Monte Carlo N-Particle (MCNP) software architecture version 6.2 including ENDF/B-V continuous energy cross-section libraries, considering intact SNF in a single storage overpack or two multi-storage overpack configurations, and intact or failed SNF configured for disposal. The dose rate computations are based on source terms taken from the DOE Spent Fuel Database. The isotopic composition was decay corrected for the year 2022 using the ORIGEN module in the SCALE suite. A 19-group photon spectrum and 27-group neutron-source spectra were generated and used in MCNP to calculate estimated dose-equivalent rates, both on DOE Standard Canister contact and at a radial distance of from the canister surface. The results of this study indicate a structurally sound system that can uphold its criticality safety functions throughout its intended operational phases. Further, they increase confidence that sufficient radiological protection is technically achievable.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
A Combined Computational, Experimental, and Technology Development Approach to In-Space Laser Manufacturing Maturation at NASA Marshall Space Flight Center
In-space manufacturing (ISM) is emerging as a field vital to continued access and capabilities in the space environment. NASA Marshall Space Flight Center (MSFC) is advancing the frontier of in-space laser manufacturing (ISLM) techniques through work initially focused on maturing laser beam welding (LBW) and laser forming (LF) for use in space. Such techniques proffer the ability to assemble and join structures in space from sheet metal or other stock – extant satellites, in situ resource utilization of Lunar regolith, etc. – by forming to desired shapes and then joining via in-space welding (ISW). ISLM processes are useful for assembly, joining, modification, and repair of structures in free space and on the Lunar surface such as large observatories, antennas, trusses, blast/thermal/radiation shields, pressure vessels, and more. However, these techniques are not yet qualified & certified (Q&C) for regular application in space. It would be prohibitively expensive, laborious, and time-consuming to perform Q&C via traditional experimental approaches as data collection & experimentation in space is resource-intensive. As such, benchmark experiments and focused, properly instrumented technology demonstration efforts in space can collect sufficient data that – when combined with verified computational models in an integrated computational materials engineering (ICME) approach – can validate ICME tools capable of translating more readily obtained ground data to in-space, in situ, computationally informed Q&C of ISLM techniques. Several ISLM projects at MSFC are obtaining the data required to validate ICME tools through both ground and flight experiments. A parabolic flight experiment of LBW under vacuum is manifested for August 2024, including both microgravity and Lunar gravity profiles. This collaboration with the Ohio State University is investigating common aerospace alloys such as 316L stainless steel, 2219 aluminum alloy, and Ti64 titanium alloy. In situ data collection includes videography, thermography, and reference thermocouples to build a thermal model of the welds. This will elucidate the relevant physics when combined with post-flight microstructural examination and mechanical testing. MSFC is also progressing towards a suborbital flight experiment of LBW under vacuum, which could provide reams of data on ISW during sustained, high-quality reduced gravity. The effect of combined thermal (cryogenic and high-temperature) and vacuum exposure on both LBW (NASA-funded) and LF (DARPA-funded) is being investigated through ground experiments. In addition to the copious data collected during these ground experiments, ruggedization of LBW hardware will also be pursued. The datasets from these experiments will be used to validate computational models which will inform future ISLM efforts in an ICME framework. A variety of techniques across lengths scales, from CALPHAD-driven thermodynamics & kinetics to phase field modeling of solidification to kinetic Monte Carlo simulations of grain evolution at the mesoscale, will be employed to accelerate the infusion and eventual Q&C of LBW and LF for use in space. The development of data-driven surrogate models to bridge ground to flight experiments and thereby reduce the need for resource-intensive experiments in space will also be investigated. These ICME techniques, surrogate models, and datasets from ground testing can also be employed to advance manufacturing in terrestrial environments.
in-space welding↗
Establishing an in-Space Joining Ecosystem at NASA Marshall via Laser Beam Welding
NASA Marshall is establishing an ISAM technology development ecosystem leveraging investments in laser beam processing to enable in-space joining via laser beam welding. A number of ground and flight experiments are being performed to develop laser beam welding as a mature process for use in space. These experiments access varied combinations of reduced gravity, reduced atmospheric pressure, and extreme temperatures to simulate relevant space environments. The associated instrumentation needed to exquisitely understand fundamental mechanisms during laser beam welding and to provide adequate validation datasets for computational models is also being developed and/or integrated.
thermal vacuum↗
Establishing an In-Space Joining Ecosystem at NASA Marshall via Laser Beam Welding
NASA Marshall is establishing an ISAM technology development ecosystem leveraging investments in laser beam processing to enable in-space joining via laser beam welding. A number of ground and flight experiments are being performed to develop laser beam welding as a mature process for use in space. These experiments access varied combinations of reduced gravity, reduced atmospheric pressure, and extreme temperatures to simulate relevant space environments. The associated instrumentation needed to exquisitely understand fundamental mechanisms during laser beam welding and to provide adequate validation datasets for computational models is also being developed and/or integrated.
thermal vacuum↗
The Marshall Automated Weld System (MAWS)
A fully automated welding system, which can operate totally independent of human intervention, is currently unavailable in the welding industry. Development of the Marshall Automated Weld System (MAWS) has been undertaken to fill this void. The system will enable application of statistical process control practices to assure weld quality prior to post weld nondestructive testing. The Variable Polarity Plasma Arc (VPPA) welding process has been baselined for MAWS because it has eliminated process related defects in the welding of the Space Shuttle External Tank. The few remaining weld defects occurring on the tank can be associated with human error. The system integrates multiple sensors (providing real time information on weld bead geometry, weld joint location, wirefeed entry, and inert gas quality) with a weld model (describing weld geometry in relation to critical parameters) and computer-controlled VPPA weld equipment. This system is designed to provide real-time, closed-loop control of the weld as it is being made.
Russell, Carolyn K.↗
The Marshall Automated Weld System (MAWS)
A fully automated welding system, which can operate totally independent of human intervention, is currently unavailable in the welding industry. Development of the Marshall Automated Weld System (MAWS) has been undertaken to fill this void. The system will enable application of statistical process control practices to assure weld quality prior to post weld nondestructive testing. The Variable Polarity Plasma Arc (VPPA) welding process has been baselined for MAWS because it has eliminated process related defects in the welding of the Space Shuttle External Tank. The few remaining weld defects occurring on the tank can be associated with human error. The system integrates multiple sensors (providing real time information on weld bead geometry, weld joint location, wirefeed entry, and inert gas quality) with a weld model (describing weld geometry in relation to critical parameters) and computer controlled VPPA weld equipment. This system is designed to provide real-time, closed-loop control of the weld as it is being made.
Russell, Carolyn K.↗
Sensor control of robot arc welding
A basic problem in the application of robots for welding which is how to guide a torch along a weld seam using sensory information was studied. Improvement of the quality and consistency of certain Gas Tungsten Arc welds on the Space Shuttle Main Engine (SSME) that are too complex geometrically for conventional automation and therefore are done by hand was examined. The particular problems associated with space shuttle main egnine (SSME) manufacturing and weld-seam tracking with an emphasis on computer vision methods were analyzed. Special interface software for the MINC computr are developed which will allow it to be used both as a test system to check out the robot interface software and later as a development tool for further investigation of sensory systems to be incorporated in welding procedures.
Sias, F. R., Jr.↗
Welding and Additive Manufacturing Approaches for Space-Based Assembly, Manufacturing and Repair
Explore the source record for details and available documents.
electron beam, metal, weld, additive manufacturing↗
Influence of control parameters on the joint tracking performance of a coaxial weld vision system
The first phase of a series of evaluations of a vision-based welding control sensor for the Space Shuttle Main Engine Robotic Welding System is described. The robotic welding system is presently under development at the Marshall Space Flight Center. This evaluation determines the standard control response parameters necessary for proper trajectory of the welding torch along the joint.
Gangl, K. J.↗
Investigation of weld joint detection capabilities of a coaxial weld vision system
This report describes the second phase of a series of evaluations of a vision-based welding control sensor for the Space shuttle Main Engine Robotic Welding System. The robotic welding system is presently under development at the Marshall Space Flight Center. This evaluation determines the factors influencing the minimum joint gap required for consistent detection of the weld joint.
Gangl, K. J.↗