Search NASA⌕ Search

SEARCH · Search NASA

Results for “xr”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

124 records · Page 7

Effects of radiation pressure on the equipotential surfaces in X-ray binaries

Equipotential surfaces incorporating the effect of radiation pressure were computed for the X-ray binaries Cen X-3, Cyg X-1 = HDE 226868, Vela XR-1 = 3U 0900-40 = HD 77581, and 3U 1700-37 = HD 153919. The topology of the equipotential surfaces is significantly affected by radiation pressure. In particular, the so-called critical Roche (Jacobian) lobes, the traditional figure 8's, do not exist. The effects of these results on modeling X-ray binaries are discussed.

Kondo, Y.↗

High energy X-ray and radio studies of Scorpius X-1

The results from extended high energy X-ray observations of Scorpius XR-1 from the OSO-8 satellite are reported here. The source was observed for a total of 15 days in 1975, 1977 and 1978. Simultaneous 10.7 GHz and 4.75 GHz radio data were obtained during the 1978 observation, and low energy X-ray data during the 1975 and 1978 observations. The data reveals a lack of any correlation between the high energy X-rays and the other energy ranges. A three standard deviation upper limit of 22% was obtained for any modulation of the high energy flux with the binary period. No high energy tail was observed at any time.

Coe, M. J.↗

Ultraviolet spectroscopy of binary systems

Four typical binary systems that illustrate some of the major problems in the study of binary stars are discussed. Consideration is given to (1) high-luminosity X-ray sources typified by Cyg X-1 (HDE 226868) and Vela XR-1 (HD 77581), (2) low-luminosity X-ray sources (HZ Her), (3) late-type systems of W UMa and RS CVn type, and (4) cool supergiants with a hot companion (VV Cephei).

Dupree, A. K.↗

The high energy X-ray spectrum of 4U 0900-40 observed from OSO 8

The X-ray source 4U 0900-40 (= Vela XR-1) was observed with the high-energy X-ray spectrometer on OSO 8 for one week in 1976 and three weeks in 1978. Spectra of the source are presented above 16 keV. No systematic difference exists between the X-ray eclipse centers and the eclipse centers predicted from optical ephermerides. Short period intrinsic variability in the system's X-ray intensity may be related to changes in the Compton scattering optical depth in the system and does not require sporadic mass transfer via Roche lobe overflow. The 282 s modulation in the source's X-ray flux above 21 keV consists of two essentially similar pulses per period, most easily interpreted as arising from the two different magnetic poles of a rotating neutron star. The secondary appears to be a spherically accreting, magnetic neutron star.

Dolan, J. F.↗

The high-energy X-ray spectrum of black hole candidate GX 339-4 during a transition

The X-ray emitting system GX 339-4 contains one of the prime candidates for a stellar mass-sized black hole. Determining the observational similarities and differences between the members of this group is of value in specifying which characteristics can be used to identify systems containing a black hole, especially those for which no mass determination can be made. The first observations of the E greater than 20 keV spectrum of GX 339-4 during a transition between luminosity states are reported here. The hard spectral state is the lower luminosity state of the system. GX 339-4 has a power-low spectrum above 20 keV which pivots during transitions between distinct luminosity states. The only other X-ray sources known to exhibit this behavior, Cyg XR-1 and (probably) A0620-00, are leading candidates for systems containing a black hole component based on their measured spectrocopic mass function.

Dolan, J. F.↗

MEASURING THE MASS OF 4UO900-40 DYNAMICALLY

Accurate measurements of neutron star masses are needed to constrain the equation of state of neutron star matter - of importance to both particle physics and the astrophysics of neutron stars - and to identify the evolutionary track of the progenitor stars that form neutron stars. The best measured values of the mass of 4UO900-40 (= Vela XR-l), 1.86 +/- 0.16 Msun (Barziv et al. 2001) and 1.93 +/- 0.20 Msun (Abubekerov et al. 2004), make it a leading candidate for the most massive neutron star known. The direct relationship between the maximum mass of neutron stars and the equation of state of ultra-dense matter makes 4UO900-40 an important neutron star mass to determine accurately. The confidence interval on previous mass estimates, obtained from observations that include parameters determined by non-dynamical methods, are not small enough to significantly restrict possible equations of state. We describe here a purely dynamical method for determining the mass of 4UO900-40, an X-ray pulsar, using the reprocessed UV pulses emitted by its BO.5Ib companion. One can derive the instantaneous radial velocity of each component by simultaneous X-ray and UV observations at the two quadratures of the system. The Doppler shift caused by the primary's rotational velocity and the illumination pattern of the X-rays on the primary, two of the three principal contributors to the uncertainty on the derived mass of the neutron star, almost exactly cancel by symmetry in this method. A heuristic measurement of the mass of 4UO900-40 using observations obtained previously with the High Speed Photometer on HST is given in Appendix A.

Dolan, J. F.↗

The Spectroscopic Evolution of the Symbiotic-like Recurrent Nova V407 Cygni During Its 2010 Outburst. 2. The Circumstellar Environment and the Aftermath

The nova outburst of V407 Cyg in 2010 Mar. 10 was the first observed for this star but its close resemblance to the well known symbiotic-like recurrent nova RS Oph suggests that it is also a member of this rare type of Galactic novae. The nova was the first detected at gamma-ray energies and is the first known nova explosion for this system. The extensive multiwavelength coverage of this outburst makes it an ideal comparison with the few other outbursts known for similar systems. We extend our previous analysis of the Mira and the expanding shock from the explosion to detail the time development of the photoionized Mira wind, circumstellar medium, and shocked circumstellar environment to derive their physical parameters and how they relate to large scale structure of the environment, extending the previous coverage to more than 500 days after outburst. We use optical spectra obtained at high resolution with the Nordic Optical Telescope (NOT) (R approx. =.45000 to 65000) and medium resolution Ondrejov Observatory (R approx. = 12000) data and compare the line variations with publicly available archival measurements at 30 GHz OVNR and at X-rays with Swift during the first four months of the outburst, through the end of the epoch of strong XR emission. We use nebular diagnostics and high resolution profile variations to derive the densities and locations of the extended emission. We find that the higher the ionization and/or the higher the excitation energy, the more closely the profiles resemble the He II/Ca V-type high velocity shock profile discussed in Paper I. This also accounts for the comparative development of the [N II] and [O III] isoelectronic transitions: the [O III] 4363A profile does not show the low velocity peaks while the excited [N II] 5754A does. If nitrogen is mainly N(+3) or higher in the shock, the upper state of the [N II] nebular lines will contribute but if the oxygen is O(+2) then this line is formed by recombination, masking the nebular contributor, and the lower states are collisionally quenched but emit from the low density surroundings. Absorption lines of Fe-peak ions formed in the Mira wind were visible as P Cyg profiles at low velocity before Day 69, around the time of the X-ray peak and we identified many absorption transitions without accompanying emission for metal lines. The H Balmer lines showed strong P Cyg absorption troughs that weakened during the 2010 observing period, through Day 128. The Fe-peak line profiles and flux variations were different for permitted and forbidden transitions: the E1 transitions were not visible after Day 128 but had shown a narrow peak superimposed on an extended (200 km/s) blue wing, while the M1 and E2 transitions persisted to Day 529, the last observation, and showed extended redshifted wings up of the same velocity. We distinguish the components from the shock, the photoionized environment, and the chromosphere and inner Mira wind using spectra taken more than one year after outburst. The multiple shells and radiative excitation phenomenology are similar to those recently cited for GRBs and SNIa .

Shore, S. N.↗

Mutual Orbit Orientations of Transneptunian Binaries

We present Keplerian orbit solutions for the mutual orbits of 17 transneptunian binary systems (TNBs). For ten of them, the orbit had not previously been known: 60458 2000 CM (sub 114), 119979 2002 WC (sub 19), 160091 2000 OL (sub 67), 160256 2002 PD (sub 149), 469514 2003 QA (sub 91), 469705 ǂKagara, 508788 2000 CQ (sub 114), 508869 2002 VT (sub 130), 1999 RT (sub 214), and 2002 XH (sub 91). Seven more are systems where the size, shape, and period of the orbit had been published, but new observations have now eliminated the sky plane mirror ambiguity in its orientation: 90482 Orcus, 120347 Salacia-Actaea, 1998 WW (sub 31), 1999 OJ (sub 4), 2000 QL (sub 251), 2001 XR (sub 254), and 2003 TJ (sub 58). The dynamical masses we obtain from TNB mutual orbits can be combined with estimates of the objects' sizes from thermal observations or stellar occultations to estimate their bulk densities. The ǂKagara system is currently undergoing mutual events in which one component casts its shadow upon the other and/or obstructs the view of the other. Such events provide valuable opportunities for further characterization of the system. Combining our new orbits with previously published orbits yields a sample of 35 binary orbits with known orientations that can provide important clues about the environment in which outer solar system planetesimals formed, as well as their subsequent evolutionary history. Among the relatively tight binaries, with semimajor axes less than about 5 percent of their Hill radii, prograde mutual orbits vastly outnumber retrograde orbits. This imbalance is not attributable to any known observational bias. We suggest that this distribution could be the signature of planetesimal formation through gravitational collapse of local density enhancements such as caused by the streaming instability. Wider binaries, with semimajor axes greater than 5 percent of their Hill radii, are somewhat more evenly distributed between prograde and retrograde orbits, but with mutual orbits that are aligned or anti-aligned with their heliocentric orbits. This pattern could perhaps result from Kozai-Lidov cycles coupled with tidal evolution eliminating high inclination wide binaries.

Grundy, W. M.↗

Trace Elemental Abundances in Calcium-Aluminum-Rich Inclusions in CV Chondrites

Introduction: Calcium-aluminum-rich inclusions (CAIs), are the first formed solids that define the age of the Solar System [1,2]. CAIs are thought to have condensed from nebular gas [3,4] within the first <1 Ma of Solar System formation [5,6]. CAIs have experienced numerous early Solar System processes including condensation, evaporation, melting, recrystallization, and aqueous alteration [e.g., 7]. The chemical, mineralogical, and textural diversity among CAIs results from a range of chemical and physical processes recorded during nebular and parent body epoch. This study aims to explore the mineralogical, textural, and chemical compositions of CAIs including the trace elemental abundances in CAI phases to determine the early Solar System processes recorded in them. Samples and Analytical Methods: We analyzed one CAI each from CV3 chondrites Northwest Africa (NWA) 5508 designated as ‘Saguaro’, and Northwest Africa (NWA) 12772 designated as ‘Hoopoe’. Back-scatter electron (BSE) images were collected using a Phenom XL scanning electron microscope (SEM) at the Lunar and Planetary Institute (LPI) and the JEOL JXA-8530F electron probe microanalyzer (EPMA) at Johnson Space Center (JSC)-NASA. Additionally, energy dispersive X-ray spectrometry (EDS) elemental maps of select areas for these samples were collected using a 15.0kV beam energy and a 40µA emission current. Using the EPMA, wavelength-dispersive X-ray spectroscopy (WDS) quantitative data were collected. In-situ trace element measurements for both CAIs were determined at JSC-NASA using a Photon Machines 193nm laser ablation system and a Thermo-Scientific Element-XR inductively coupled plasma mass spectrometer (ICP-MS). Analyses consisted of 30s ablations at 10Hz, spot sizes of 20-25µm, and a fluence of 6.0 J/cm2 for anorthite and melilite, and a 3.5 J/cm2 fluence for all other phases. NIST612 was used to correct for instrument drift, while BHVO-2g was used as a primary calibration standard. BCR-2g and in-house mineral standards were regularly measured as unknowns to ensure accuracy. Results: Saguaro is a coarse-grained CAI, ~11 x 6 mm in dimensions. Saguaro contains spinel, Al-rich pyroxene, anorthite, Mg-rich melilite, and minor perovskite in its interior and is therefore classified as a Type B CAI. Individual melilite grains shows normal compositional zoning with an Ak content ranging from ~24 to 54 with no apparent trend from the core to the edge of the CAI. The spinel appears euhedral and occurs both as clusters and as spinel palisades [8]. Two rim sequences surround most of the sample: the inner rim being a Wark-Lovering (WL) rim (~10-35 µm) containing pyroxene, spinel, and melilite (or anorthite), and the outer rim is a finer-grained, thicker (~100 µm), accretionary rim (Fig. 1). The mineral phases in Saguaro record an overall flat REE pattern with an average negative Eu anomaly in pyroxene, and an average positive Eu anomaly in anorthite and melilite respectively. Anorthite, melilite, and pyroxene have a minor depletion in Tm (Fig. 2). The Hoopoe CAI is a compact, coarse-grained ~6 × 4 mm in size. The major mineralogy includes hibonite, spinel, melilite, anorthite, and perovskite. Therefore, it is classified as a compact transitional type A and B. (?)zoning was observed in some hibonites. Individual melilite grains show both reverse and normal zoning, where the Ak content ranges from ~6- to 28. Melilite shows two distinct textures. One texture consisted of smooth melilite that appeared homogenous, while the second appeared to consist of many fine fractures. The spinel also often appears clustered. The WL-rim sequence surrounding Hoopoe is ~25 µm thick and composed of spinel, perovskite, hibonite, and melilite/anorthite. It is then partially surrounded by an outer accretionary rim (~75µm). Like before, refractory metal nuggets appeared concentrated near the WL rims. Other metal assemblages rich in Fe and Ni were also observed. All major mineral phases in Hoopoe display relatively flat REE patterns, except for varying Eu and Tm between phases (Fig. 2). There is a prominent negative Eu anomaly in perovskite and an average positive Eu anomaly in spinel, anorthite, and hibonite respectively (Fig. 2, 3). The mixed phases along the rim of the CAI also display a negative Eu anomaly, and all phases the CAI were depleted in Pb. Discussion: The CV3 CAIs analyzed in this study were classified based on their mineralogy and textures into Type A versus Type B CAIs [10]. Hibonite appears to be pseudomorphically replacing the spinel, (i.e., is hibonite in composition, but appears in the shape of spinel). Spinel palisades. The presence of spinel palisades present in Saguaro are consistent with the melting and recrystallization experienced by this CAI. Trace elemental analyses. Saguaro and Hoopoe display similar trace element patterns to each other, with both appearing generally flat, with anomalies in Eu, and Tm. Melilite and anorthite display positive Eu anomalies in both CAIs, in addition to the hibonite in Hoopoe (Fig. 2). The phases that are depleted in Eu are pyroxene and perovskite in both Saguaro and Hoopoe, respectively (Fig. 3). Given that Eu is volatile in reducing environments [11], this could possibly indicate reducing conditions at the time anorthite and melilite crystallized, with the gas they formed from containing Eu. As these CAIs continued to form, this gas as a result would become depleted in Eu. This also could be supported by the propensity of anorthite and melilite to take up Eu from its surroundings and incorporate it into their structure [12]. In addition, analyzing the assemblage of the phases in the Saguaro, melilite and anorthite (Eu enriched) often surround the pyroxene (Eu depleted) as they are crystallized. This intergrowth of phases and the proximity of the phases would support that the Eu is being incorporated into some phases, preventing it from incorporating into other. Trace elemental analyses of the CAI rims will be evaluated in more detail, as they are complicated by the transient signal being composed of a mixture of mineral phases. Broadly, however, the patterns in the rims of both CAIs are comparable to each other, and for Hoopoe, to the mixed phase patterns in the core (Fig. 3). Other studies have found that CAI rims can be depleted in Ce and Yb [13], however we did not observe these anomalies in the two CAIs discussed here. Given their similarity, the trace elemental analyses of the mixed interior (i.e. core) and rim phases could be interpreted as forming from similar, if not the same, reservoirs. The REE abundance between the rim and core of Hoopoe are also similar, indicating they may have formed from a gas of the same or similar composition. Acknowledgments: We thank the ASU Center for Meteorite Studies for loaning the samples used in this work and Tabb Prissel for his assistance with the analysis. Mouti Al-Hashimi thanks Sam Crossley and Cyrena Goodrich for their help with the LPI SEM training. This work was supported by the LPI Summer Intern Program in Planetary Science and the LPI Cooperative Agreement. References: [1] Connelly J.N. (2012) Science, 338, 651-655. [2] MacPherson G. J. (2014) Treatise on Geochem., 2, 139-179. [3] Grossman L. (1972) GCA, 36, 597-619. [4] Ebel, D.S. (2006) Meteorites and the Early Solar System II (D. S. Lauretta & H. Y. McSween, Eds.) 253-277. [5] MacPherson G. J. (2012) Earth Planet. Sci. Lett., 331-332, 43-54. [6] MacPherson G.J. (2017) GCA, 201, 65-82. [7] Krot A.N. (1995) Meteoritics & Planet. Sci., 30, 748-775. [8] Wark and Lovering (1982) GCA, 46, 2595-2607. [9] Palme H. and Jones A. (2003) Treatise on Geochemistry (H. D. Holland and K. K. Turekian Eds.), 1, 41-61. [10] Grossman L. (1980) Ann. Rev. Earth Planet. Sci., 8, 559-608. [11] Floss C. et al. (1996) GCA, 60, 1975-1997. [12] Mason B. and Martin P. M. (1974) Earth Planet. Sci. Lett., 22, 141-144. [13] Wark B. and Boynton W. V. (2001) Meteoritics & Planet. Sci., 36, 1135-1166.

X Mouti↗

Additional Trials & Tribulations in Synthesizing a Sulfide Standard

Well-characterized sulfide reference materials that can serve as matrix-matched calibrants for in-situ trace element analyses via laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) remain elusive. Here, we describe the creation an in-house sulfide standard at NASA JSC that will be used to measure siderophile and chalcophile trace elements in low pressure experimental products, specifically pentlandite ([FeNi]9S8) and pyrrhotite ([FeNi]1-xS), as well as natural sulfides in terrestrial and meteoritic mineral assemblages. Recent methods in creating a homogenous sulfide standard include pressed pellets, synthesized chips, or fused glass [e.g. 1-3]. Other studies, however, have had success in forming homogenous FeS standards via synthesization methods [e.g. 4-6]. We present a variation of the method described in [4], in which we create a pyrrhotite standard doped with a variety of trace elements (Zn, As, Se, Mo, Ru, Rh, Pd, Sn, Sb, Te, W, Os, Ir, Pt, Au) at ~10-40 ppm and Cu at ~200 ppm. Sulfide compositions were constructed using Fe and Ni metal and elemental sulfur powders. Trace elements were added to elemental sulfur from Atomic Absorption Spectroscopy (AAS) elemental standards as either nitrate or chloride solutions to prevent oxidation of the metal powders. The dried sulfur mixture was mixed with Fe and Ni powders and mechanically mixed before two aliquots were placed in separate SiO2 tubes. Each tube was held under vacuum for ~30 minutes, sealed under vacuum, and then heated at 800C for 48 hours. Like [4], the synthesis products were composed of pourous sulfide crystals. Major element analyses of both experimental aliquots, collected using an Electron Probe Microanalyser (EPMA), yield indistinguishable major element compositions (uncertainties in 2SE & 2RSE[%]), with an average of 57.90  0.09 (0.16 %), 4.95  0.03 (0.55 %), and 39.70  0.14 (0.34 %), for Fe, Ni, and S, respectively. Trace element data were measured using a Photon Machines 193nm laser ablation system coupled to a Thermo-Scientific Element-XR ICP-MS. Spot sizes were limited to 50 μm due to the porous nature of the sulfide target material. Trace element abundances, normalized to Fe as an internal standard, were also found to be homogenous between the two aliquots, with weighted mean 2RSE (%) values of <3.0 for all trace elements. Synthesized products were re-powdered and absolute concentrations measured via solution ICP-MS. Although the sulfide appears to be homogenous, sintering experiments will be performed to more closely match the standard density to natural sulfides and minimize differences in ablation behavior. Improved density also allows for higher sensitivity (i.e. more compact target material) and larger spot sizes or traverses, as void space is eliminated. Additional major and trace element analyses on the products of the sintering experiments will be undertaken.

Jacob B Setera↗

Immersive Technologies for Human-in-the-Loop Lunar Surface Simulations

NASA, the National Aeronautics and Space Administration, continually seeks innovative solutions to enhance its operations, particularly in the realms of testing, evaluation, and training for future missions. Immersive technologies, such as virtual, augmented, and mixed reality have proven to be powerful tools for realistic, interactive, and engaging environments. This paper explores how the Simulation and Graphics Branch at NASA’s Johnson Space Center (JSC) leverages immersive technology, modern commercial rendering engines, and physics-based systems simulations to develop human-in-the-loop systems for humanity’s return to the Moon through the Artemis program. When NASA returns to the Moon, astronauts will travel to the Moon’s South Pole where lighting conditions will cause a more complex operational environment. Human-in-the-loop testing plays a crucial role in NASA's mission planning, spacecraft and space systems development, and evaluation of operational scenarios. The development of immersive environments such as a lunar rover mockup at a video wall enables engineers and astronauts to simulate and experience mission scenarios, integrated spacecraft systems, and operational procedures in a relevant environment before deployment. By integrating realistic virtual environments, immersive technology allows for the visualization and interaction with virtual spacecraft models, mission landscapes, and complex operational tasks. This approach helps identify potential design flaws, operational challenges, and safety considerations. It also provides valuable insights for risk reduction and helps improve mission efficiency and effectiveness. With advanced motion tracking systems and custom virtual environments data can be gathered and evaluated to help NASA refine training protocols, develop specialized training procedures and optimize human-robotic interactions for future space missions. Furthermore, immersive technology offers opportunities for future training initiatives at NASA. The Virtual Reality Laboratory at JSC has pioneered training with Virtual Reality (VR) since the Hubble Space Telescope repair missions in the early 1990’s. Extended Reality (XR) simulations enable astronauts to rehearse complex spacewalks, spacecraft maneuvers, and extravehicular activities in a safe and controlled environment. By replicating the physical and cognitive challenges of space missions, immersive training experiences enhance astronauts' situational awareness, decision-making abilities, and adaptability to unexpected scenarios. Additionally, immersive technology facilitates collaborative training, allowing geographically dispersed crew and mission control personnel to engage in synchronized simulations, fostering teamwork and effective communication. The adoption of immersive technology in NASA's testing, evaluation, and future training programs has yielded significant benefits. By incorporating human-in-the-loop testing for studies involving Extra Vehicular Activities (EVA), surface mobility and landing systems, NASA can identify and mitigate risks, optimize operational procedures, and enhance mission success. Ultimately, immersive training experiences can empower astronauts to better navigate the complexities of space missions, ensuring their safety, productivity, and success in the dynamic and challenging environments they will experience at the Lunar South Pole.

Simulation Modeling Virtual Reality Immersive Tech↗

Center for Isotope Cosmochemistry and Geochronology at NASA Johnson Space Center

The Center for Isotope Cosmochemistry and Geochronology (CICG) at the NASA Johnson Space Center, led by Justin Simon, applies novel elemental and isotopic analytical techniques to understand solar system formation, from processes occurring during the earliest Solar Nebula, to the evolution of planetary bodies during planet formation and differentiation. CICG consists of an integrated suite of labs including dedicated spaces for specialized handling and preparation of meteorites and planetary return samples, metal-free clean chemistry, and mass spectrometry. In addition to a Thermo-Scientific Triton thermal ionization mass spectrometer (TIMS) for high precision isotopic analyses in processed samples, CICG houses two additional mass spectrometry instruments with added laser ablation capabilities for high spatial resolution in-situ measurements: (1) a Thermo-Scientific Element-XR inductively coupled mass spectrometer (ICP-MS) with a Teledyne Photon Machines Analyte Excite+ laser ablation system, and (2) a Nu Sapphire 1700 multi-collector ICP-MS, a large geometry instrument with a multi-pole collision cell for interference removal, with an Applied Spectra J200 tandem laser induced breakdown spectroscopy (LIBS) femto-second laser ablation system. We detail the analytical capabilities of CICG in the context of current and future research projects related to the studies of protoplanetary disk evolution via early-formed Solar System solids, volatile abundances and distribution within the inner solar system, and geochemical and temporal investigations related to planet formation and differentiation. We also highlight opportunities through the relationship with the Center of the Advancement of Space Safety and Mission Assurance Research (CASSMAR) at the University of Texas at El Paso. CICG is open to collaborations and participates in the NASA Facility for Astromaterials Research (NFAR) program, which accepts research proposals for access to the unique facility capabilities.

Jacob B. Setera↗

Immersive Technologies for Human-in-the-Loop Lunar Surface Simulations

NASA, the National Aeronautics and Space Administration, continually seeks innovative solutions to enhance its operations, particularly in the realms of testing, evaluation, and training for future missions. Immersive technologies, such as virtual, augmented, and mixed reality have proven to be powerful tools for immersing users in realistic, interactive, and engaging environments. This paper explores how the Simulation and Graphics Branch at NASA’s Johnson Space Center (JSC) leverages immersive technology, modern commercial rendering engines, and physics-based systems simulations to develop human-in-the-loop systems for humanity’s return to the Moon through the Artemis program. When NASA returns to the Moon, astronauts will travel to the Moon’s South Pole where lighting conditions will cause a more complex operational environment. Human-in-the-loop simulations play a crucial role in NASA’s mission planning, spacecraft and space systems development, and evaluation of operational scenarios. The development of immersive environments such as a lunar rover mockup at a video wall enables engineers and astronauts to simulate and experience mission scenarios, integrated spacecraft systems, and operational procedures in a relevant environment before deployment. By integrating realistic virtual environments, immersive technology allows for the visualization and interaction with virtual spacecraft models, mission landscapes, and complex operational tasks. This approach helps identify potential design flaws, operational challenges, and safety considerations. It also provides valuable insights for risk reduction and helps improve mission efficiency and effectiveness. With advanced motion tracking systems and custom virtual environments, data can be gathered and evaluated to help NASA refine training protocols, develop specialized training procedures, and optimize human-robotic interactions for future space missions. Furthermore, immersive technology offers opportunities for future training initiatives at NASA. The Virtual Reality Laboratory at JSC has pioneered training with Virtual Reality (VR) since the Hubble Space Telescope repair missions in the early 1990’s. Extended Reality (XR) simulations enable astronauts to rehearse complex spacewalks, spacecraft maneuvers, and extravehicular activities in a safe and controlled environment. By replicating the physical and cognitive challenges of space missions, immersive training experiences enhance astronauts’ situational awareness, decision-making abilities, and adaptability to unexpected scenarios. Additionally, immersive technology facilitates collaborative training, allowing geographically dispersed crew and mission control personnel to engage in synchronized simulations, fostering teamwork and effective communication. The adoption of immersive technology in NASA’s testing, evaluation, and future training programs has yielded significant benefits. By incorporating human-in-the-loop simulations for studies involving Extra Vehicular Activities (EVA), surface mobility and landing systems, NASA can identify and mitigate risks, optimize operational procedures, and enhance mission success. Ultimately, immersive simulation experiences can empower astronauts to better navigate the complexities of space missions, ensuring their safety, productivity, and success in the dynamic and challenging environments they will experience at the Lunar South Pole.

HITL↗

Trace Element and Isotopic Evidence for Bennu's Primitive Provenance

The delivery of material from asteroid (101955) Bennu by NASA’s OSIRIS-REx mission provides the opportunity to investigate some of the most pristine material from the early Solar System [1]. Our team at Lawrence LivermoreNational Laboratory (LLNL) utilized the equivalent of 5.0 mg from Bennu sampleOREX-803015-100 to quantify the major and trace element contents and investigate major element isotopics (Ca, Ti, Cr, Fe, and Ni). Our 5.0 mg aliquot ofOREX-803015-100 was a subsample of dissolved homogenized material representing 20.66 mg [2]. A separate 5.0 mg aliquot was sent to ETH Zürich and is discussed in a companion abstract [3]. Before any chemical separation on our 5.0 mg aliquot, the equivalent of 0.5 mg was removed and analyzed for elemental abundances at LLNL using a ThermoScientific Element XR. Our data agree exceptionally well with those reported by[2], showing that Bennu is primitive and compositionally similar to CI chondrites, Ryugu [4], and the solar photosphere [5]. The remaining ~4.5 mg underwent purification procedures to chemically isolate and purify Ca, Ti, Cr, Fe, and Ni from one another and the sample matrix. Their isotopic compositions were measured on either the Triton TIMS (Ca) at JohnsonSpace Center in Houston, Neoma MC-ICPMS (Ti, Cr) at LLNL, or the Neptune MC-ICPMS (Fe, Ni) at LLNL. Results from the Ca, Ti, Cr, Fe, and Ni isotopic compositions suggest that Bennu is closely related to CI chondrites—consistent with conclusions from elemental composition [2] and oxygen isotopics [6]reported for Bennu. The major element isotope compositions that we will present demonstrate that Bennu likely formed in a similar region of the SolarSystem as CI chondrites and potentially at a similar time of Solar System evolution.

Greg Brennecka↗

Developing a Natural User Interface and Facial Recognition System With OpenCV and the Microsoft Kinect

The task for this project was to design, develop, test, and deploy a facial recognition system for the Kennedy Space Center Augmented/Virtual Reality Lab. This system will serve as a means of user authentication as part of the NUI of the lab. The overarching goal is to create a seamless user interface that will allow the user to initiate and interact with AR and VR experiences without ever needing to use a mouse or keyboard at any step in the process.

Human Interfaces↗

Trades, Architecture, and Design of the Joint Augmented Reality Visual Informatics (Joint AR) Product

Future expeditions will enable exploration and study of the planetary surfaces of the Moon and Mars by performing extravehicular activity (EVA) operations. Present-day International Space Station (ISS) EVA operations require an intricate and tight choreography of crew, space suits, tools, systems, and flight teams to plan, train, and execute with limited advanced informatics. Additionally, EVA operations, aside from the Apollo Lunar surface missions, have predominately focused on maintenance and construction tasks where success criteria are clearly measurable. However, future exploration missions expect to enable crew to carry out scientific objectives in increasingly Earth-independent ways. In this paper, the Joint Augmented Reality Visual Informatics System (Joint AR) characterizes the design space for developing a modular augmented reality (AR) device for a spacesuit form factor that can support crew decision-making for EVA. This paper highlights the project’s experience with a product-focused management style and use-case centered systems engineering approach to iteratively design, build, and test. The Joint AR product features were defined via trade studies and market analysis of previous EVA display efforts, various AR components such as optics, commercial AR systems, light engines, data interfaces, graphics engine software and analog test beds. We outline the defining architectural design decisions, including safety criticality considerations, suit mounting interfaces, computer architectures, and partnership contracting mechanisms. The outcomes of these studies, architecture decisions, and management requirements result in a recommended design which is the Joint AR product. We discuss the evolution, development of these system components, and what work remains. We hope to share a unified understanding of various design decisions and how they impact the future of crew members’ access to data during Lunar and Martian EVAs. This ongoing effort can enable a community-wide discovery process toward realizing necessary AR features and capabilities for future missions.

Augmented Reality↗